RESUMO
Volatile organic compound (VOC) sensors have a broad range of applications including healthcare monitoring, product quality control, and air quality management. However, many such applications are demanding, requiring sensors with high sensitivity and selectivity. 2D materials are extensively used in many VOC sensing devices due to their large surface-to-volume ratio and fascinating electronic properties. These properties, along with their exceptional flexibility, low power consumption, room-temperature operation, chemical functionalization potential, and defect engineering capabilities, make 2D materials ideal for high-performance VOC sensing. Here, a 2D MoS2/Te heterojunction is reported that significantly improves the VOC detection compared to MoS2 and Te sensors on their own. Density functional theory (DFT) analysis shows that the MoS2/Te heterojunction significantly enhances the adsorption energy and therefore sensing sensitivity of the sensor. The sensor response, which denotes the percentage change in the sensor's conductance upon VOC exposure, is further enhanced under photo-illumination and zero-bias conditions to values up to ≈7000% when exposed to butanone. The MoS2/Te heterojunction is therefore a promising device architecture for portable and wearable sensing applications.
RESUMO
Heavy metals stress particularly cadmium contamination is hotspot among researchers and considered highly destructive for both plants and human health. Iron is examined as most crucial element for plant development, but it is available in inadequate amount because they are present in insoluble Fe3+ form in soil. Fe3O4 have been recently found as growth promoting factor in plants. To understand, a sand pot experiment was conducted in completely randomized design (control, cadmium, 20 mg/L Fe3O4 nanoparticles,40 mg/L Fe3O4 nanoparticles, 20 mg/L Fe3O4 nanoparticles + cadmium, 40 mg/L Fe3O4 nanoparticles + cadmium) to study the mitigating role of Fe3O4 nanoparticles on cadmium stress in three Raphanus sativus cultivars namely i.e., MOL SANO, MOL HOL PARI, MOL DAQ WAL. The plant growth, physiological and biochemical parameters i.e.,shoot length, shoot fresh weight, shoot dry weight, root length, root fresh and dry weight, MDA content, soluble protein contents, APX, CAT, POD activities and ion concentrations, membrane permeability, chlorophyll a, chlorophyll b and anthocyanin content, respectively were studied. The results displayed that cadmium stress remarkably reduces all growth, physiological and biochemical parameters for allcultivars under investigation. However, Fe3O4 nanoparticles mitigated the adverse effect of cadmium by improving growth, biochemical and physiological attributes in all radish cultivars. While, 20 mg/L Fe3O4 nanoparticles have been proved to be more useful against cadmium stress. The outcome of present investigation displayed that Fe3O4 nanoparticles can be utilized for mitigating heavy metal stress.
RESUMO
The commercial viability of emerging lithium-sulfur batteries (LSBs) remains greatly hindered by short lifespans caused by electrically insulating sulfur, lithium polysulfides (Li2Sn; 1 ≤ n ≤ 8) shuttling, and sluggish sulfur reduction reactions (SRRs). This work proposes the utilization of a hybrid composed of sulfiphilic MoS2 and mayenite electride (C12A7:e-) as a cathode host to address these challenges. Specifically, abundant cement-based C12A7:e- is the most stable inorganic electride, possessing the ultimate electrical conductivity and low work function. Through density functional theory simulations, the key aspects of the MoS2/C12A7:e- hybrid including electronic properties, interfacial binding with Li2Sn, Li+ diffusion, and SRR have been unraveled. Our findings reveal the rational rules for MoS2 as an efficient cathode host by enhancing its mutual electrical conductivity and surface polarity via MoS2/C12A7:e-. The improved electrical conductivity of MoS2 is attributed to the electron donation from C12A7:e- to MoS2, yielding a semiconductor-to-metal transition. The resultant band positions of MoS2/C12A7:e- are well matched with those of conventional current-collecting materials (i.e., Cu and Ni), electrochemically enhancing the electronic transport. The accepted charge also intensifies MoS2 surface polarity for attracting polar Li2Sn by forming stronger bonds with Li2Sn via ionic Li-S bonds than electrolytes with Li2Sn, thereby preventing polysulfide shuttling. Importantly, MoS2/C12A7:e- not only promotes rapid reaction kinetics by reducing ionic diffusion barriers but also lowers the Gibbs free energies of the SRR for effective S8-to-Li2S conversion. Beyond the reported applications of C12A7:e-, this work highlights its functionality as an electrode material to boost the efficiency of LSBs.
RESUMO
The unique attributes of hydrophilicity, expansive surface groups, remarkable flexibility, and superior conductivity converge in MXene, a pioneering 2D material. Owing to MXene's exceptional properties, diverse strategies have been explored to enhance its characteristics. Janus MXene and stress-strain response considerations represent the primary avenues of interest today. In this study, we investigated the Janus MXene structure under biaxial stress using first-principles calculations. The most stable configuration of Janus MoWC MXene identified in our analysis exhibits an atomic arrangement known as the hexagonal (2H) phase. Subsequently, we examined the mechanical and electronic properties of 2H-MoWC when subjected to biaxial strain. Our findings indicate that the 2H phase of Janus MoWC MXene demonstrates superior strength compared to the tetragonal (1T) phase. Analysis of the ELF of the 2H-MoWC structure unveiled that the robust C-C bond within the material is the underlying factor enabling the 2H phase to withstand a maximum of 9% tensile strain. Furthermore, we demonstrate that 2H-MoWC is a superconductor with the superconducting temperature (Tc) of 1.6 K, and the superconductivity of 2H phase can be enhanced by biaxial strain with the Tc reaching 7 K. This study offers comprehensive insights into the properties of Janus MoWC monolayer under biaxial stress, positioning it as a promising candidate for 2D straintronic applications.
RESUMO
The production of citric acid, a vital agricultural commodity utilized across various industries such as food, beverages, pharmaceuticals, agriculture, detergents, and cosmetics, predominantly relies on microbial fermentation, with Aspergillus niger accounting for approximately 90% of global production. In this study, we aimed to optimize the key factors influencing citric acid production, with a focus on strains, fermentation techniques, and carbon sources, particularly sugarcane molasses. A. niger, sourced from the Botany department/Biotechnology laboratories at Govt. College of Science, Lahore, was employed for citric acid production. The process involved inoculum preparation through spore collection from 3 to 5 days of cultured PDA slants. The fermentation medium, comprising cane molasses with a 15% sugar concentration, was meticulously prepared and optimized for various factors, including magnesium sulfate, potassium ferrocyanide, time of addition of potassium ferrocyanide, ammonium oxalate, and calcium chloride. Our optimization results shed light on the significant impact of different factors on citric acid production. For instance, the addition of 0.4 g/L magnesium sulfate led to a maximum yield of 75%, while 2 g/L potassium ferrocyanide, added at 24 h, achieved a yield of 78%. Remarkably, ammonium oxalate, at a concentration of 10 g/L, resulted in a notable 77% yield. Conversely, the addition of calcium chloride exhibited negligible effects on citric acid production, with the control group yielding more at 78%. Our study underscores the potential for optimizing factors to enhance citric acid production by A. niger in submerged fermentation. These findings highlight the pivotal role of magnesium sulfate, potassium ferrocyanide, and ammonium oxalate in augmenting citric acid yields while emphasizing the minimal impact of calcium chloride. Ultimately, these insights contribute to advancing our understanding of microbial citric acid biosynthesis, providing valuable implications for industrial applications and future research endeavors.
RESUMO
Being a major obstacle, Ag2Te has always been restricted in p-type AgSbTe2-based materials to improve their thermoelectric performance. This work reveals a stabilized AgSbTe2 through Sn/Ge alloying as synthesized by melting, annealing, and hot press. Interestingly, addition of Sn/Ge in AgSbTe2 extended the solubility limit up to â¼30% and hence suppressed Ag2Te in Ag(1-x)SnxSb(1-y)GeyTe2 compounds and led to enhanced electrical transport. Moreover, electrical and thermal transport properties of AgSbTe2 have been greatly affected by the phase transition of Ag2Te near 425 K. However, high-entropy Ag0.85Sn0.15Sb0.85Ge0.15Te2 compound results in a stabilized rock-salt structure and presents a high power factor of â¼10.8 µW cm-1 K-2 at 757 K. Besides, density functional theory reveals that available multivalence bands in Sn/Ge-doped AgSbTe2 lead to reduction in energy offsets. Meanwhile, a variety of defects appear in the Ag0.85Sn0.15Sb0.85Ge0.15Te2 sample due to entropy change, and thus lattice thermal conductivity decreases. Ultimately, a high figure of merit of â¼1.5 is attained at 757 K. This work demonstrates a roadmap for other group IV-VI materials so that the high-entropy approach may inhibit the impurity phases with extended solubility limit and result in high thermoelectric performance.
RESUMO
BACKGROUND: Controlled and targeted drug delivery to treat nonalcoholic fatty liver disease (NAFLD) can benefit from additive attributes of natural formulation ingredients incorporated into the drug delivery vehicles. METHODS: Lovastatin (LVN) loaded, bile acid (BA) and fatty acid (FA) integrated nanoemulsomes (NES) were formulated by thin layer hydration technique for synergistic and targeted delivery of LVN to treat NAFLD. Organic phase NES was comprised of stearic acid with garlic (GL) and ginger (GR) oils, separately. Ursodeoxycholic acid and linoleic acid were individually incorporated as targeting moieties. RESULTS: Stability studies over 90 days showed average NES particle size, surface charge, polydispersity index, and entrapment efficiency values of 270 ± 27.4 nm, -23.8 ± 3.5 mV, 0.2 ± 0.04 and 81.36 ± 3.4%, respectively. Spherical NES were observed under a transmission electron microscope. In-vitro LVN release depicted non-fickian release mechanisms from GL and GR oils-based NES. Ex-vivo permeation of BA/FA integrated NES through isolated rat intestines showed greater flux than non-integrated ones. CONCLUSION: Liver histopathology of experimental rats together with in-vivo lipid profiles and liver function tests illustrated that these NES possess the clinical potential to be promising drug carriers for NAFLD.
Assuntos
Ácidos e Sais Biliares , Sistemas de Liberação de Medicamentos , Estabilidade de Medicamentos , Emulsões , Ácidos Graxos , Lovastatina , Hepatopatia Gordurosa não Alcoólica , Tamanho da Partícula , Animais , Hepatopatia Gordurosa não Alcoólica/tratamento farmacológico , Ratos , Ácidos e Sais Biliares/química , Masculino , Lovastatina/administração & dosagem , Lovastatina/farmacocinética , Lovastatina/química , Ácidos Graxos/química , Ácidos Graxos/administração & dosagem , Nanopartículas/química , Ratos Sprague-Dawley , Portadores de Fármacos/químicaRESUMO
Introduction: The utilization of fauna and fauna-based byproducts in ethnomedicinal usages has been a longstanding human activity, practiced across various cultures worldwide. This study focuses on investigating the utilization of animal-based traditional medicine by the people of Pakistan, specifically in the Gujranwala area. Methods: Data collection took place from January to September 2019 through interviews with local communities. Ethnomedicinal applications of animal products were analyzed using several indices, including Relative Frequency of Citation (RFC), Relative Popularity Level (RPL), Folk Use Value (FL), and Relative Occurrence Percentage (ROP). Results: The study identified the use of different body parts of 54 species of animals in treating various diseases and health issues. These include but are not limited to skin infections, sexual problems, pain management (e.g., in the backbone and joints), eyesight issues, immunity enhancement, cold, weakness, burns, smallpox, wounds, poisoning, muscular pain, arthritis, diabetes, fever, epilepsy, allergies, asthma, herpes, ear pain, paralysis, cough, swelling, cancer, bronchitis, girls' maturity, and stomach-related problems. Certain species of fauna were noted by informers with high "frequency of citation" (FC), ranging from 1 to 77. For instance, the black cobra was the most frequently cited animal for eyesight issues (FC = 77), followed by the domestic rabbit for burn treatment (FC = 67), and the Indus Valley spiny-tailed ground lizard for sexual problems (FC = 66). Passer domesticus and Gallus gallus were noted to have the highest ROP value of 99. Discussion: The findings of this study provide valuable preliminary insights for the conservation of fauna in the Gujranwala region of Punjab, Pakistan. Additionally, screening these animals for medicinally active compounds could potentially lead to the development of novel animal-based medications, contributing to both traditional medicine preservation and modern pharmaceutical advancements.
RESUMO
Ants belonging to the Monomorium indicum (Formicidae: Hymenoptera) species are ubiquitous insects that are commonly associated with household settings in Pakistan. Packaged foodstuffs are easily destroyed by household ants when packaging is made with materials that have a high susceptibility. This study evaluated the susceptibility of three common flexible plastic packaging materials namely: opaque polyethylene, transparent polyethylene and polypropylene, which were each tested at thicknesses of 0.02 mm for their susceptibility against M. indicum. Except opaque polyethylene which is only available at 0.02 mm thickness, both transparent polyethylene and polypropylene were tested at higher thickness of 0.04 mm and 0.06 mm also against M. indicum. In order to simulate household settings, experiments were conducted at the faculty building of the agriculture and environment department of The Islamia University of Bahawalpur, Pakistan during summer vacations when the building was quiet. Different corners were selected near water sources for maximum exposure to the largest number of ants. Experimental cages used for the experiment were built with wood and 2 mm iron gauze to allow only ants to enter the cages. Daily activity of ants was used as an infestation source in cages. Experiments were run over three time spans of fifteen days each from June 20th 2022 to August 15th 2022. Results showed all packaging materials were susceptible against M. indicum at the 0.02 mm thickness level. Polypropylene was susceptible at 0.04 mm thickness but resistant to ants at 0.06 mm thickness, whereas polyethylene was still susceptible to ants at the higher thickness of 0.06 mm. Correlation of packaging damage with weather factors showed that temperature had a positive relationship, while relative humidity had a negative association with M. indicum attack. Overall correlation of packaging damage with packaging thickness showed packaging thickness was negatively associated with packaging damage from the ants. Because major cutting role is performed by the mandibles, we studied mandibles of ants and three frequent pests of packaged foodstuff namely Rhyzopertha dominica, Tribolium castaneum and Trogoderma granarium. The results showed that ants had the largest mandible and frontal mandibular tooth lengths compared with the mandibles and frontal teeth of the common stored product pests, indicating M. indicum household ants have a higher pest status for packaged foodstuffs compared to common stored product pests. Although the thickness of the flexible plastic packaging was a major factor against household ants, the study results recommend the use of polypropylene with a thickness of at least 0.06 mm as foodstuff packaging against household ants compared with polyethylene packaging, which was found to be susceptible to ants even at 0.06 mm thickness.
Assuntos
Formigas , Besouros , Animais , Polipropilenos , PolietilenoRESUMO
Domestic yak (Bos grunniens) is an economically important feature of the mountainous region of Gilgit-Baltistan in Pakistan where agriculture is restricted and yaks play multiple roles which includes being a source of milk, meat, hides, fuel and power. However little is known about the parasitic infections in Pakistani yaks. Aim of this research was to report the prevalence and genetic diversity of protozoa parasite (Theileria ovis, 18 S rDNA gene was targeted) and an obligate bacterium (Anaplasma marginale, msp-1 gene was amplified) in the blood that was sampled from 202 yaks collected from four districts in Gilgit-Baltistan during January 2023 till January 2024. Results revealed that 6/202 (3%) yaks were of Theileria ovis while 8/202 (4%) were Anaplasma marginale infected. Positive PCR products of both parasites were confirmed by DNA sequencing and their similarity with previously available pathogen sequences was determined by BLAST analysis. Phylogenetic tree indicated that isolates of both parasites displayed genetic. Anaplasma marginale infection varied with the sampling districts and Shigar district had the highest rate of bacterial infection. Cows were significantly more prone to Theileria ovis infection than bulls. Calf and hybrid yaks were more prone to Anaplasma marginale infection. In conclusion, this is the first report that yaks residing the Gilgit-Baltistan region in Pakistan are infected with Theileria ovis and Anaplasma marginale. Similar larger scales studies are recommended in various regions of Gilgit-Baltistan to document the infection rates of these parasites to formulate strategies that will lead to the effective control of these pathogens.
Assuntos
Anaplasma marginale , Anaplasmose , Theileria , Carrapatos , Feminino , Bovinos , Animais , Ovinos , Anaplasma marginale/genética , Theileria/genética , Paquistão/epidemiologia , Anaplasma/genética , Prevalência , Carrapatos/microbiologia , Carrapatos/parasitologia , Filogenia , Anaplasmose/epidemiologia , Anaplasmose/microbiologiaRESUMO
Heavy metal contamination in water is a serious environmental issue due to the toxicity of metals like lead. This study developed zeolite and multi-walled carbon nanotube (MWCNT) incorporated polyacrylonitrile (PAN) nanofibers via needleless electrospinning and examined their potential for lead ion adsorption from aqueous solutions. The adsorption process was optimized using response surface methodology (RSM) and artificial neural network (ANN) modeling approaches. The adsorbent displayed efficient lead removal of 84.75% under optimum conditions (adsorbent dose (2.21 g), adsorption time (207 min), temperature (48 °C), and initial concentration (62 ppm)). Kinetic studies revealed that the adsorption followed pseudo-first-order kinetics governed by interparticle diffusion. Isotherm analysis indicated Langmuir monolayer adsorption with improved 5.90 mg g-1 capacity compared to pristine PAN nanofibers. Thermodynamic parameters suggested the adsorption was spontaneous and endothermic. This work demonstrates the promise of electrospun zeolite/MWCNT nanofibers as adsorbents for removing lead from wastewater.
RESUMO
Selected volatile organic compounds (VOCs), such as benzene (C6H6), cyclohexane (C6H12), isoprene (C5H8), cyclopropanone (C3H4O), propanol (C3H8O), and butyraldehyde butanal (C4H8O), in exhaled human breath can act as indicators or biomarkers of lung cancer diseases. Detection of such VOCs with low density would pave the way for an early diagnosis of the disease and thus early treatment and cure. In the present investigation, the density-functional theory (DFT) is applied to study the detection of the mentioned VOCs on Ti3C2TX MXenes, saturated with the functional groups Tx = O, F, S, and OH. For selectivity, comparative sensing of other interfering air molecules from exhaled breath, such as O2, N2, CO2, and H2O is further undertaken. Three functionalization (Tx = O, F, and S) are found promising for the selective detection of the studied VOCs, in particular Ti3C2O2 MXenes has shown distinct sensor response toward the C5H8, C6H6, C6H12, and C3H4O. The relatively strong physisorption ([Formula: see text]), triggered between VOC and MXene due to an enhancement of van der Waals interaction, is found responsible to affect the near Fermi level states, which in turn controls the conductivity and consequently the sensor response. Meanwhile, such intermediate-strength interactions remain moderate to yield small desorption recovery time (of order [Formula: see text] using visible light at room temperature. Thus, Ti3C2O2 MXenes are found promising candidate material for reusable biosensor for the early diagnosis of lung cancer diseases through the VOC detection in exhaled breath.
Assuntos
Neoplasias Pulmonares , Compostos Orgânicos Voláteis , Humanos , Neoplasias Pulmonares/diagnóstico , Titânio , Biomarcadores Tumorais , Testes Respiratórios , PulmãoRESUMO
RESEARCH HIGHLIGHTS: Virulent NDV genotypes were repeatedly isolated from pigeons.Evidence of epidemiological links among viruses isolated from various locations.Distinct phylogenetic branches suggest separate, simultaneous evolution of NDVs.Study information could be helpful in the development of an effective vaccine.
Assuntos
Doença de Newcastle , Vírus da Doença de Newcastle , Animais , Columbidae , Variação Genética , Genótipo , Doença de Newcastle/epidemiologia , Paquistão , FilogeniaRESUMO
Despite the prodigious potential of lithium-sulfur (Li-S) batteries as future rechargeable electrochemical systems, their commercial implementation is hindered by several vital issues, including the shuttle effect and sluggish migration of lithium-polysulfides leading to rapid capacity fading. Here, we systematically investigate the potential of first-row two-dimensional transition metal carbides (TMCs) as sulfur cathodes for Li-S batteries. The adsorption strength of lithium-polysulfides on TMCs is induced by the amount of charge transfer from the former to the latter and the proposed periodic relationship between sulfur in Li2S and 3d-transition metals. Our findings show that the VC nanosheet possesses immense anchoring potential and exhibits a comparatively low migration energy barrier for lithium-ion and Li2S molecules. Additionally, we report ab initio molecular dynamics simulations for lithiated polysulfide species anchored on a TMC-based model with a liquid-electrolyte medium. The microscopic reaction mechanism, revealed by the evolution of the reaction voltage during lithiation, demonstrates that the dissolution of high-order lithium-polysulfides in the electrolytes can be prevented due to their robust interaction with TMC-based cathode materials. These appealing features suggest that TMCs present colossal performance improvements for anchoring lithium-polysulfides, stimulating the active design of sulfur cathodes for practical Li-S batteries.
RESUMO
This paper investigates the development of fabric materials using several blends of inherently fire-resistant (FR) fibers and various knitted structures. The samples are evaluated with respect to their performance and comfort-related properties. Inherently fire-resistant fibers, e.g., Nomex, Protex, carbon and FR viscose, were used to develop different structures of knitted fabrics. Cross-miss, cross-relief, and vertical tubular structures were knitted by using optimum fiber blend proportions and combinations of stitches. Several important aspects of the fabric samples were investigated, e.g., their physical, mechanical and serviceability performance. Thermo-physiological and tactile/touch-related comfort properties were evaluated in addition to flame resistance performance. An analysis of mechanical performance indicated that the knitted structure has a significant influence on the tensile strength, bursting strength and pilling resistance. The cross-relief structure proved to be the strongest followed by the cross-miss and vertical tubular structures. The FR station suits made from 70:30 Protex/Nomex exhibited the best combination of tensile and bursting strength; therefore, this material is recommended for making a stable and durable station suit. Interestingly, it was also concluded from the experimental study that knitted samples with a cross-relief structure exhibit the best fire-resistance performance. Fiber blends of 70:30 Protex/Nomex and 70:30 Nomex/carbon were found to be optimum in terms of overall performance. The best flame resistance was achieved with Nomex:carbon fiber blends. These results were confirmed with vertical flammability tests, TGA, DTGA and cone calorimetry analysis. The optimization of blend composition as well as knitting structure/architecture is a crucial finding toward designing the best FR station suit in terms of mechanical, dimensional, thermal, thermo-physiological and flame resistance performance.
RESUMO
Indicine cattle, also referred to as zebu (Bos taurus indicus), play a central role in pastoral communities across a wide range of agro-ecosystems, from extremely hot semiarid regions to hot humid tropical regions. However, their adaptive genetic changes following their dispersal into East Asia from the Indian subcontinent have remained poorly documented. Here, we characterize their global genetic diversity using high-quality whole-genome sequencing data from 354 indicine cattle of 57 breeds/populations, including major indicine phylogeographic groups worldwide. We reveal their probable migration into East Asia was along a coastal route rather than inland routes and we detected introgression from other bovine species. Genomic regions carrying morphology-, immune-, and heat-tolerance-related genes underwent divergent selection according to Asian agro-ecologies. We identify distinct sets of loci that contain promising candidate variants for adaptation to hot semi-arid and hot humid tropical ecosystems. Our results indicate that the rapid and successful adaptation of East Asian indicine cattle to hot humid environments was promoted by localized introgression from banteng and/or gaur. Our findings provide insights into the history and environmental adaptation of indicine cattle.
Assuntos
Evolução Biológica , Ecossistema , Animais , Bovinos , Alelos , Variação Genética , Sequenciamento Completo do Genoma , Polimorfismo de Nucleotídeo ÚnicoRESUMO
The present study reports the population structure, genetic admixture and phylogeography of cattle breeds of Sri Lanka viz. Batu Harak, Thawalam and White cattle. Moderately high level of genetic diversity was observed in all the three Sri Lankan zebu cattle breeds. Estimates of inbreeding for Thawalam and White cattle breeds were relatively high with 6.1% and 7.2% respectively. Genetic differentiation of Sri Lankan Zebu (Batu Harak and White cattle) was lowest with Red Sindhi among Indus Valley Zebu while it was lowest with Hallikar among the South Indian cattle. Global F statistics showed 6.5% differences among all the investigated Zebu cattle breeds and 1.9% differences among Sri Lankan Zebu breeds. The Sri Lankan Zebu cattle breeds showed strong genetic relationships with Hallikar cattle, an ancient breed considered to be ancestor for most of the Mysore type draught cattle breeds of South India. Genetic admixture analysis revealed high levels of breed purity in Lanka White cattle with >97% Zebu ancestry. However, significant taurine admixture was observed in Batu Harak and Thawalam cattle. Two major Zebu haplogroups, I1 and I2 were observed in Sri Lankan Zebu with the former predominating the later in all the three breeds. A total of 112 haplotypes were observed in the studied breeds, of which 50 haplotypes were found in Sri Lankan Zebu cattle. Mismatch analysis revealed unimodal distribution in all the three breeds indicating population expansion. The sum of squared deviations (SSD) and raggedness index were non-significant in both the lineages of all the three breeds except for I1 lineage of Thawalam cattle (P<0.01) and I2 lineage of Batu Harak cattle (P<0.05). The results of neutrality tests revealed negative Tajima's D values for both the lineages of Batu Harak (P>0.05) and White cattle (P>0.05) indicating an excess of low frequency polymorphisms and demographic expansion. Genetic dilution of native Zebu cattle germplasm observed in the study is a cause for concern. Hence, it is imperative that national breeding organizations consider establishing conservation units for the three native cattle breeds to maintain breed purity and initiate genetic improvement programs.
Assuntos
Bovinos , Variação Genética , Animais , Bovinos/genética , Variação Genética/genética , Endogamia/estatística & dados numéricos , Filogeografia , Polimorfismo Genético , Sri Lanka , Masculino , FemininoRESUMO
MXenes, a family of superior 2D materials, have been intensively investigated because they have many promising properties, particularly high-performance energy storage and high flexibility. To approach the expected critical benchmarks of such materials, the strain dependence of the atomic structure is widely considered for tuning the related properties. In this work, by means of density functional theory, we demonstrate the potential application of the strained 2H phase of Mo2C-based MXenes (Mo2C and Mo2CO2) as anode materials for lithium-ion batteries (LIBs). Adsorption and diffusion of Li on the surfaces of both materials and the impact of biaxial strain (εb) in the range of -4% to 4% are insightfully investigated. The lowest adsorption energy of Mo2C is -0.96 eV, and that of Mo2CO2 is -3.13 eV at εb = 0%. The diffusion of Li ions, considering the pathway between the first two most favorable adsorption sites, reveals that the biaxial strain refinement under compressive strain decreases the energy barrier, but the induction of tensile strain increases it in both MXenes. The ranges of the energy barriers of Li-ion adsorption on the surfaces of Mo2C and Mo2CO2 are 31-57 meV and 177-229 meV, respectively. Interestingly, the storage capacity of Li can reach three layers corresponding to a comparably high theoretical capacity of 788.61 mA h g-1 for Mo2C and 681.64 mA h g-1 for Mo2CO2. The atomic configurations are stable, as verified by the negative adsorption energy as well as the slightly distorted structures, by using ab initio molecular dynamics (AIMD) simulations at 400 K. Moreover, average open circuit voltages (OCVs) of 0.35 V and 0.63 V (at εb = 0%) are reported for Mo2C and Mo2CO2, respectively. Furthermore, the tensile strain results in an increase in the OCVs, while compression has the opposite effect. These computational results provide some basic information on the behaviors of Li-ion adsorption and diffusion on Mo2C-based MXenes upon tuning biaxial strain. They also give a guideline on what conditions are appropriate for practically implementing these MXenes as electrode materials in LIBs.
RESUMO
Oxidative stress (OS) is a phenomenon induced by excessive production and accumulation of reactive oxygen species (ROS) in living cells. These increased ROS productions connected, coupled with many neurological and physiological diseases. Several antioxidants were utilized recently to combat OS, and lactic acid bacteria have a potent radical-scavenging activity to minimize OS. The present work was designed to find out the protective effects of Lactobacillus brevis MG000874 (L. brevis MG000874) against oxidative injuries induced by D-galactose (D-gal) in vivo and to explore the gene expression of OS-related gene mice. Sixty male mice were randomly split into six groups. The first four groups were different control groups as no treatment (N), positive (G), probiotic (B), and ascorbic acid (A); the remaining two groups were treatment groups such as probiotic treatment (BG) and ascorbic acid treatment (AG). L. brevis MG000874 (0.2 ml of 1010 CFU/ml) and ascorbic acid (0.2 ml of 25 mg/ml) were administered orally daily for 5 weeks. It was revealed that these significantly affect the weight of treated mice: 40.22 ± 1.5 and 33.0 ± 0.57 g on days 0 and 36, respectively. D-gal induction in mice declined the levels of SOD and CAT determined by spectrophotometer. Administration of L. brevis MG000874 improved the antioxidant status of the stress mice and recovered the antioxidant activities of SOD and CAT enzymes. In addition, L. brevis MG000874-altered gene expression of OS marker at the messenger RNA (mRNA) levels was determined by RT-PCR in the mouse model. L. brevis MG000874 significantly improved the GST, GPX, SOD, CAT, and ß-actin levels in the kidney and the liver of the D-gal-induced mice (p < 0.05). Moreover, the histological investigation indicated that L. brevis MG000874 mitigated damage to the kidney and liver effectively in mice induced by D-gal. Therefore, it could be concluded from the current results that L. brevis MG000874 may act as a powerful antioxidant agent, and this study can provide the baseline data for drug development against OS-linked diseases.
Assuntos
Antioxidantes , Levilactobacillus brevis , Masculino , Camundongos , Animais , Antioxidantes/metabolismo , Galactose/metabolismo , Galactose/farmacologia , Espécies Reativas de Oxigênio/metabolismo , Estresse Oxidativo , Fígado , Rim , Modelos Animais de Doenças , Ácido Ascórbico/farmacologia , Ácido Ascórbico/metabolismo , Superóxido Dismutase/metabolismo , Expressão Gênica , EnvelhecimentoRESUMO
The COVID19 pandemic has impacted the global economy, social activities, and Electricity Consumption (EC), affecting the performance of historical data-based Electricity Load Forecasting (ELF) algorithms. This study thoroughly analyses the pandemic's impact on these models and develop a hybrid model with better prediction accuracy using COVID19 data. Existing datasets are reviewed, and their limited generalization potential for the COVID19 period is highlighted. A dataset of 96 residential customers, comprising 36 and six months before and after the pandemic, is collected, posing significant challenges for current models. The proposed model employs convolutional layers for feature extraction, gated recurrent nets for temporal feature learning, and a self-attention module for feature selection, leading to better generalization for predicting EC patterns. Our proposed model outperforms existing models, as demonstrated by a detailed ablation study using our dataset. For instance, it achieves an average reduction of 0.56% & 3.46% in MSE, 1.5% & 5.07% in RMSE, and 11.81% & 13.19% in MAPE over the pre- and post-pandemic data, respectively. However, further research is required to address the varied nature of the data. These findings have significant implications for improving ELF algorithms during pandemics and other significant events that disrupt historical data patterns.