Investigating the momentum balance of a plasma pinch: an air-side stereoscopic imaging system for locating probes.

The momentum balance of a plasma pinch in the Reconnection Scaling Experiment (RSX) is examined in three dimensions using several repositionable, insertable probes. A new camera-based system described here triangulates the locations of the probe tips so that their measurements are spatially registered. The optical system locates probes to within ±1.5 mm of their absolute 3D position in the vessel and to within ±0.7 mm relative to other probes, on the order of the electron inertial length (1-2 mm).

Superdiffusion of two-dimensional Yukawa liquids due to a perpendicular magnetic field.

Stochastic transport of a two-dimensional (2D) dusty plasma liquid with a perpendicular magnetic field is studied. Superdiffusion is found to occur especially at higher magnetic fields with ß of order unity. Here, ß = ω(c)/ω(pd) is the ratio of the cyclotron and plasma frequencies for dust particles. The mean-square displacement MSD = 4D(α)t(α) is found to have an exponent α > 1, indicating superdiffusion, with α increasing monotonically to 1.1 as ß increases to unity. The 2D Langevin molecular dynamics simulation used here also reveals that another indicator of random particle motion, the velocity autocorrelation function, has a dominant peak frequency ω(peak) that empirically obeys ω(peak)(2) = ω(c)(2) + ω(pd)(2)/4.

A compact fast ionization gauge for in situ measurement of high-density neutral flow dynamics.

A compact ionization gauge has been developed to carry out in situ measurements of high density (10(20)-10(22) m(-3)) neutral gas flow dynamics with high temporal and spatial resolution. Key design aspects are discussed including gauge sensitivity and time response scaling with decreased probe dimensions, high-pressure operation, improved driver circuit bandwidth, and techniques for constructing a miniaturized probe head. Gas adsorption was discovered to significantly alter emission current and gauge sensitivity over timescales of several seconds. This effect must be taken into consideration when making time-resolved, high-density measurements. Over short timescales gauge response was predicted by scaling the sensitivity of a nominal Bayard-Alpert gauge to account for variations in probe dimensions and species-dependent ionization cross-section. Time-resolved neutral density profiles have been acquired in the Magnetized Shock Experiment at Los Alamos National Laboratory, providing data on the initial conditions of the ionization, plasmoid formation, and translation processes. It is shown that the desired density profiles can be achieved using a dynamic gas fill and that density can be scaled independently of the spatial profile.

Applied magnetic field design for the field reversed configuration compression heating experiment.

Detailed calculations of the formation, guide, and mirror applied magnetic fields in the FRC compression-heating experiment (FRCHX) were conducted using a commercially available generalized finite element solver, COMSOL Multiphysics(®). In FRCHX, an applied magnetic field forms, translates, and finally captures the FRC in the liner region sufficiently long to enable compression. Large single turn coils generate the fast magnetic fields necessary for FRC formation. Solenoidal coils produce the magnetic field for translation and capture of the FRC prior to liner implosion. Due to the limited FRC lifetime, liner implosion is initiated before the FRC is injected, and the magnetic flux that diffuses into the liner is compressed. Two-dimensional axisymmetric magnetohydrodynamic simulations using MACH2 were used to specify optimal magnetic field characteristics, and this paper describes the simulations conducted to design magnetic field coils and compression hardware for FRCHX. This paper presents the vacuum solution for the magnetic field.

Flux rope dynamics: experimental study of bouncing and merging.

We show experimentally for the first time that two mutually attracting flux ropes may bounce back instead of merging together, leading to a variety of dynamics not expected from a two-dimensional model. Attraction forces due to flux rope currents compete with repulsion from field line bending of in-plane and out-of-plane magnetic fields and elastic plasma compression. Bouncing dynamics occurs if the line-bending force due to an out-of-plane field dominates. Otherwise, the ropes merge. Further reduction in the field line-bending force results in violently erratic magnetic states.

Transition of MHD kink-stability properties between line-tied and non-line-tied boundary conditions.

Magnetic flux tubes or flux ropes in plasmas are important in nature and the laboratory. Axial boundary conditions strongly affect flux rope behavior, but this has never been systematically investigated. We experimentally demonstrate for the first time axial boundary conditions that are continuously varied between ideal magnetohydrodynamic (MHD) line-tied (fixed) and non-line-tied (free). In contrast with the usual interpretation that mechanical plasma motion is MHD line-tied to a conducting boundary, we constrain boundary plasma motion to cause the line-tied condition.

Current-driven rotating-kink mode in a plasma column with a non-line-tied free end.

First experimental measurements are presented for the kink instability in a linear plasma column which is insulated from an axial boundary by finite sheath resistivity. An instability threshold below the classical Kruskal-Shafranov threshold, axially asymmetric mode structure, and rotation are observed. These are accurately reproduced by a recent kink theory, which includes axial plasma flow and one end of the plasma column that is free to move due to a non-line-tied boundary condition.