RESUMO
The advent of intracranial stents has revolutionized the endovascular treatment of cerebral aneurysms. The utilization of stents has rendered numerous cerebral aneurysm amenable to endovascular treatment, thereby obviating the need for otherwise invasive open surgical options. Stent placement has become a mainstream approach because of its safety and efficacy. However, further improvements are required for clinically approved devices to avoid the frequent occurrence of thrombotic complications. Therefore, controlling the thrombotic complications associated with the use of devices is of significant importance. Our group has developed a unique stent coated with a 2-methacryloyloxyethyl phosphorylcholine (MPC)-based polymer. In this study, the surface characteristics of the polymer coating were verified using X-ray photoelectron spectroscopy and atomic force microscopy. Subsequently, the antithrombotic properties of the coating were evaluated by measuring platelet count and thrombin-antithrombin complex levels of whole human blood after 3 h of incubation in a Chandler loop model. Scanning electron microscopy was utilized to examine thrombus formation on the stent surface. We observed that MPC polymer-coated stents significantly reduced thrombus formation as compared to bare stents and several clinically approved devices. Finally, the coated stents were further analyzed by implanting them in the internal thoracic arteries of pigs. Angiographic imaging and histopathological examinations that were performed one week after implantation revealed that the vascular lumen was well maintained and coated stents were integrated within the vascular endothelium without inducing adverse effects. Thus, we demonstrated the efficacy of MPC polymer coating as a viable strategy for avoiding the thrombotic risks associated with neurovascular stents.
RESUMO
The 2-methacryloyloxyethyl phosphorylcholine (MPC) polymers are mimetic to phospholipids, being widely used as biocompatible polymers. In our previous study, MPC polymer hydrogels proved more effective for optical tissue clearing compared to acrylamide (AAm) polymer hydrogels. In the present study, 2-acryloyloxyethyl phosphorylcholine (APC) was synthesized and employed to create hydrogels for a comparative analysis with methacrylic MPC-based hydrogels. APC, an acrylic monomer, was copolymerized with AAm in a similar reactivity. In contrast, MPC, as a methacrylic monomer, demonstrated higher copolymerization reactivity than AAm, leading to a spontaneously delayed two-step polymerization behavior. This suggests that the polymer sequences and network structures became heterogeneous when both methacrylic and acrylic monomers, as well as crosslinkers, were present in the copolymerization system. The molecular weight of the APC polymers was considerably smaller than that of the MPC polymers due to the formation of mid-chain radicals and subsequent ß-scission during polymerization. The swelling ratios in water and strain sweep profiles of hydrogels prepared using acrylic and methacrylic compounds differed from those of hydrogels prepared using only acrylic compounds. This implies that copolymerization reactivity influences the polymer network structures and crosslinking density in addition to the copolymer composition. APC-based hydrogels are effective for the optical clearing of tumor tissues and are applicable to both passive and electrophoretic methods.
RESUMO
Most drug candidates developed in recent years are poorly water-soluble, which is a key challenge in pharmaceutical science. Various solubilization methods have been investigated thus far, most of which require solubilizers that provide a local hydrophobic environment wherein a drug can dissolve or induce interactions with drug molecules. We have focused on amphiphilic 2-methacryloyloxyethyl phosphoryl choline (MPC) polymers. In addition to the ease of molecular design of amphiphilic MPC polymers owing to their chemical structures, they have been reported to possess high biocompatibility in various biomaterial applications. Additionally, amphiphilic MPC polymers have been applied in the pharmaceutical field, especially in solubilization. We have qualitatively and quantitatively evaluated the effects of the chemical structure and physical properties of the solubilizer on the MPC polymers. In particular, MPC polymers with different chemical structures were designed and synthesized. The inner polarity and molecular mobility in the polymer aggregates were evaluated, indicating that the intrinsic properties reflect the chemical structure of the polymer. Additionally, amphiphilic MPC polymers were used to improve the solubility of poorly water-soluble drugs and as solid dispersion carriers, and they exhibited superior solubilizing abilities compared to a commonly used polymer. Furthermore, the solubility of biopharmaceuticals, such as peptides, was improved. It is possible to design and synthesize optimal structures based on the polarity of the hydrophobic environment and the intermolecular interaction with a drug. This research provides a unified interpretation of drugs and efficiently summarizes knowledge about drug development, which will facilitate the efficient and rapid development of drug formulations.
Assuntos
Materiais Biocompatíveis , Colina , Excipientes , Fosfolipídeos , Polímeros , ÁguaRESUMO
Contact lenses are one of the most successful applications of biomaterials. The chemical structure of the polymers used in contact lenses plays an important role in determining the function of contact lenses. Different types of contact lenses have been developed based on the chemical structure of polymers. When designing contact lenses, materials scientists consider factors such as mechanical properties, processing properties, optical properties, histocompatibility, and antifouling properties, to ensure long-term wear with minimal discomfort. Advances in contact lens materials have addressed traditional issues such as oxygen permeability and biocompatibility, improving overall comfort, and duration of use. For example, silicone hydrogel contact lenses with high oxygen permeability were developed to extend the duration of use. In addition, controlling the surface properties of contact lenses in direct contact with the cornea tissue through surface polymer modification mimics the surface morphology of corneal tissue while maintaining the essential properties of the contact lens, a significant improvement for long-term use and reuse of contact lenses. This review presents the material science elements required for advanced contact lenses of the future and summarizes the chemical methods for achieving these goals.
Assuntos
Lentes de Contato , Silicones , Hidrogéis , Biomimética , Oxigênio , PolímerosRESUMO
Cationic random copolymers (PCm) consisting of 2-(methacryloyloxy)ethyl phosphorylcholine (MPC; P) with methacroylcholine chloride (MCC; C) and anionic random copolymers (PSn) consisting of MPC and potassium 3-(methacryloyloxy)propanesulfonate (MPS; S) were prepared via a reversible addition-fragmentation chain transfer method. "m" and "n" represent the compositions (mol %) of the MCC and MPS units in the copolymers, respectively. The degrees of polymerization for the copolymers were 93-99. Water-soluble MPC unit contains a pendant zwitterionic phosphorylcholine group whose charges are neutralized in pendant groups. MCC and MPS units contain the cationic quaternary ammonium and anionic sulfonate groups, respectively. The stoichiometrically charge-neutralized mixture of a matched pair of PCm and PSn aqueous solutions resulted in the spontaneous formation of water-soluble PCm/PSn polyion complex (PIC) micelles. These PIC micelles have the MPC-rich surface and MCC/MPS core. These PIC micelles were characterized using 1H NMR, dynamic and static light scattering, and transmission electron microscopic measurements. The hydrodynamic radius of these PIC micelles depends on the mixing ratio of the oppositely charged random copolymers. The charge-neutralized mixture formed maximum-size PIC micelles.
RESUMO
Liposome surface coating has been studied to avoid the immunological responses caused by the complement system, and alternative materials to poly(ethylene glycol) (PEG) have been explored recently since the production of anti-PEG IgM antibodies has been found in humans. We previously reported a liposome coating with poly(2-methacryloyloxyethyl phosphorylcholine) (poly(MPC))-conjugated lipids (PMPC-lipids) and demonstrated its protective effect on blood protein interactions. Here, we attempted to modify the liposome surface by exogenously adding PMPC-lipids, which were spontaneously incorporated into the outer membrane via hydrophobic interactions. The polymerization degree of the PMPC segment was regulated from 10 to 100. The incorporated ratio of PMPC-lipid increased with a decrease in the degree of PMPC polymerization. Due to surface modification with PMPC-lipids, increase in the length of the PMPC-chain increased the size of the liposomes. The modified liposomes were kept stable for 14 d in terms of their size, polydispersity, and surface properties, where approximately 70% of PMPC-lipids were incorporated into the liposome surface. We demonstrated that liposome surface modification with PMPC-lipids can inhibit protein adsorption when exposed to serum, regardless of the degree of polymerization of PMPC. In addition, the PMPC-lipid modified surface was not recognized by the anti-PEG IgM antibody, whereas PEG-lipid was recognized by the antibody. Thus, we successfully fabricated an inert liposome surface via spontaneous modification with PMPC-lipids, where only the outer bilayer surface was modified. This technique can be available for full loading of water-soluble active pharmaceutical ingredient inside the modified liposome.
RESUMO
Infections caused by biofouling have become a serious concern in the health care sector. Multifunctional coatings with antifouling and antibacterial properties are widely used to combat these biofouling related infections. However, in practice macro or micro scratches or damages can happen to the coating, which can act as an active site for microbial deposition and destroy the antifouling or antibacterial functionality of the coating. Considering this fact, we have developed an excellent biocompatible and multifunctional coating with antifouling, antibacterial and self-healing properties. In this study, prebiotic chemistry inspired self-polymerization of aminomalononitrile (AMN) was used as a primary coating layer, which acted as a primer to graft vitamin B5 analogous methacrylamide polymer poly(B5AMA) and zwitterionic compound 2-methacryloyloxyethyl phosphorylcholine (MPC) containing polymer poly (MPC-st-B5AMA) by forming strong hydrogen bonds. B5AMA having multiple polar groups in the structure acted as an intrinsic self-healing material and showed an excellent antifouling property against protein and bacteria, maintaining a good hydration layer similar to the MPC containing polymer. To impart the antibacterial property to the coating, silver nanoparticles have also been incorporated, which showed more than 90% killing efficiency against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria with significant reduction of their adhesion on the surface. Incorporation of self-healing property into the fouling repelling and antibacterial coating can significantly extend the durability of the multifunctional coating, making it promising for biomedical applications.
Assuntos
Incrustação Biológica , Nanopartículas Metálicas , Polímeros/farmacologia , Incrustação Biológica/prevenção & controle , Staphylococcus aureus , Escherichia coli , Prata , Antibacterianos/farmacologia , Antibacterianos/química , Propriedades de Superfície , Materiais Revestidos Biocompatíveis/farmacologia , Materiais Revestidos Biocompatíveis/químicaRESUMO
This review summarizes recent research on the design of polymer material systems based on biomimetic concepts and reports on the medical devices that implement these systems. Biomolecules such as proteins, nucleic acids, and phospholipids, present in living organisms, play important roles in biological activities. These molecules are characterized by heterogenic nature with hydrophilicity and hydrophobicity, and a balance of positive and negative charges, which provide unique reaction fields, interfaces, and functionality. Incorporating these molecules into artificial systems is expected to advance material science considerably. This approach to material design is exceptionally practical for medical devices that are in contact with living organisms. Here, it is focused on zwitterionic polymers with intramolecularly balanced charges and introduce examples of their applications in medical devices. Their unique properties make these polymers potential surface modification materials to enhance the performance and safety of conventional medical devices. This review discusses these devices; moreover, new surface technologies have been summarized for developing human-friendly medical devices using zwitterionic polymers in the cardiovascular, cerebrovascular, orthopedic, and ophthalmology fields.
RESUMO
Intermediate filaments (IF) bind to various proteins and regulate cell function in the cytoplasm. Recently, IFs were found to regulate gene expression by acting as capture scaffolds for transcription-related proteins and preventing their translocation into the nucleus. To reveal such transcriptional regulatory mechanisms controlled by IFs, a method to analyze the interaction between IFs and transcription-related proteins is necessary. Although there are many methods to observe interactions in living cells, it is still challenging to measure protein-protein interactions in living cells in their unmodified and native state. In this study, we utilized a nanoneedle that can access the cytosol by insertion into the cell. Modification of antibody recognizing transcription-related proteins allows the needle to detect mechanical force required to unbind the interaction between antibody and target proteins interacting with IFs during retraction of the needle from the cell. We focused on IF vimentin, a marker of epithelial-mesenchymal transition, to mechanically detect transcription-related proteins trapped by vimentin filaments. Prohibitin 2 (PHB2), a transcription-related factor, was selected as the candidate vimentin-binding protein. We conducted mechanical detection of PHB2 using atomic force microscopy and anti-PHB2 antibody-modified nanoneedles in vimentin-expressing mouse breast cancer and vimentin-knockout (VKO) cells. Significantly larger unbinding forces were detected in the vimentin-expressing cells than in the VKO cells. The results demonstrate that this method is useful for in-cell mechanical detection of IF-binding proteins.
Assuntos
Técnicas Biossensoriais , Filamentos Intermediários , Animais , Citoplasma , Filamentos Intermediários/metabolismo , Camundongos , Microscopia de Força Atômica/métodos , Vimentina/genética , Vimentina/metabolismoRESUMO
Solid dispersions are one of methods for solubilizing water-insoluble drugs. To enhance the bioavailability, maintenance of the supersaturated state and absorption of the dissolved drug in the gastrointestinal tract are important. We designed and synthesized amphiphilic 2-methacryloyloxyethyl phosphorylcholine (MPC) copolymers as carriers for solid dispersions and evaluated the dissolution behavior in test solutions with different pH and additives. Solid dispersion of troglitazone with amphiphilic MPC copolymers having both aromatic rings and urethane bonds in the side chains showed rapid dissolution and excellent supersaturation maintenance. It was indicated that the balance between the interactions with drug molecules and the water affinity of the polymer should be considered when carriers for solid dispersions are designed. In addition, cell membrane permeability of the solid dispersion with the amphiphilic MPC copolymer was evaluated by the Dissolution / Permeation system, which consists of two liquid chambers and a monolayer of epithelial cells that mimics the intestinal dissolution and permeation process. Further, blood concentration of the drug when solid dispersions were orally administered in mice was also evaluated. The cell membrane permeability and oral absorbability were significantly improved, compared to the solid dispersions with poly(N-vinylpyrrolidone) and suspension or solution of crystalline troglitazone.
Assuntos
Polímeros , Água , Animais , Camundongos , Fosfolipídeos , Polímeros/química , Solubilidade , Troglitazona , Uretana , Água/químicaRESUMO
Double-hydrophilic diblock copolymers, PMPC100-block-PGEMAn (M100Gn), were synthesized via reversible addition-fragmentation chain transfer radical polymerization using glycosyloxyethyl methacrylate and 2-(methacryloyloxy)ethyl phosphorylcholine. The degree of polymerization (DP) of the poly(2-(methacryloyloxy) ethylphosphorylcholine) (PMPC) block was 100, whereas the DPs (n) of the poly(glycosyloxyethyl methacrylate) PGEMA block were 18, 48, and 90. Water-soluble complexes of C70/M100Gn and fullerene (C70) were prepared by grinding M100Gn and C70 powders in a mortar and adding phosphate-buffered saline (PBS) solution. PMPC can form a water-soluble complex with hydrophobic C70 using the same method. Therefore, the C70/M100Gn complexes have a core-shell micelle-like particle structure possessing a C70/PMPC core and PGEMA shells. The maximum amounts of solubilization of C70 in PBS solutions using 2 g/L each of M100G18, M100G48, and M100G90 were 0.518, 0.358, and 0.257 g/L, respectively. The hydrodynamic radius (Rh) of C70/M100Gn in PBS solutions was 55-75 nm. Spherical aggregates with a similar size to the Rh were observed by transmission electron microscopy. When the C70/M100Gn PBS solutions were irradiated with visible light, singlet oxygen was generated from C70 in the core. It is expected that the C70/M100Gn complexes can be applied to photosensitizers for photodynamic therapy treatments.
Assuntos
Fulerenos , Fosforilcolina , Glucose , Metacrilatos/química , Fosforilcolina/química , Polímeros/química , Água/químicaRESUMO
Hydrophilic poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) shows biocompatibility because the pendant phosphorylcholine group has the same chemical structure as the hydrophilic part of phospholipids that form cell membranes. Hollow particles can be used in various fields, such as a carrier in drug delivery systems because they can encapsulate hydrophilic drugs. In this study, vinyl group-decorated silica particles with a radius of 150 nm were covered with cross-linked PMPC based on the graft-through method. The radius of PMPC-coated silica particles increased compared to that of the original silica particles. The PMPC-coated silica particles were immersed in a hydrogen fluoride aqueous solution to remove template silica particles to prepare the hollow particles. The PMPC hollow particles were characterized by dynamic light scattering, infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy observations. The thickness of the hollow particle shell can be controlled by the polymerization solvent quality. When a poor solvent for PMPC was used for the polymerization, PMPC hollow particles with thick shells can be obtained. The PMPC hollow particles can encapsulate hydrophilic guest molecules by immersing the hollow particles in a high-concentration guest molecule solution. The biocompatible PMPC hollow particles can be used in a drug carrier.
Assuntos
Fosforilcolina , Dióxido de Silício , Micelas , Fosforilcolina/química , Ácidos Polimetacrílicos/química , SolventesRESUMO
Fabrication of devices that accurately recognize, detect, and separate target molecules from mixtures is a crucial aspect of biotechnology for applications in medical, pharmaceutical, and food sciences. This technology has also been recently applied in solving environmental and energy-related problems. In molecular recognition, biomolecules are typically complexed with a substrate, and specific molecules from a mixture are recognized, captured, and reacted. To increase sensitivity and efficiency, the activity of the biomolecules used for capture should be maintained, and non-specific reactions on the surface should be prevented. This review summarizes polymeric materials that are used for constructing biointerfaces. Precise molecular recognition occurring at the surface of cell membranes is fundamental to sustaining life; therefore, materials that mimic the structure and properties of this particular surface are emphasized in this article. The requirements for biointerfaces to eliminate nonspecific interactions of biomolecules are described. In particular, the major issue of protein adsorption on biointerfaces is discussed by focusing on the structure of water near the interface from a thermodynamic viewpoint; moreover, the structure of polymer molecules that control the water structure is considered. Methodologies enabling stable formation of these interfaces on material surfaces are also presented.
Assuntos
Polímeros , Água , Adsorção , Membrana Celular , Polímeros/químicaRESUMO
The self-assembly of pH-responsive random and block copolymers composed of 2-(N,N-diisopropylamino)ethyl methacrylate and 2-methacryloyloxyethyl phosphorylcholine was investigated in aqueous media. Their pH-responsive behaviors were investigated in aqueous media by dynamic light scattering (DLS) and fluorescence measurements using a pyrene hydrophobic fluorescence probe. In an acidic environment, these copolymers existed as single polymer chains that did not interact with each other. In contrast, upon increasing the pH of the solution above the critical value of ~8, separated micelles were formed in the mixture, which was indicated by bimodal distribution in DLS results with radius of 4.5 and 10.4 nm, corresponding to the random and block copolymer micelles, respectively. Fluorescence resonance energy transfer efficiencies were near to zero in the mixture of the donor labeled block and acceptor labeled random copolymers under both acidic and basic pH. These results demonstrated the coexistence of two distinct micelles.
RESUMO
The rapid accumulation of dead bacteria or protein on a bactericidal surface can reduce the effectiveness of the modified surface and alter its biocidal activity by shielding the surface biocide functional groups, promoting microbial attachment and subsequent biofilm formation. Thus, the alteration of biocidal activity due to biofilm formation can cause serious trouble including severe infection or implant or medical device failure leading to death. Therefore, developing a smart self-cleaning surface is of great interest. Ideally, such a surface can not only kill the attached microbials but also release the dead cells and foulants from the surface under a particular incitement on demand. In this project, a sugar-responsive self-cleaning coating has been developed by forming covalent boronic ester bonds between catechol groups from polydopamine and a benzoxaborole pendant from zwitterionic and cationic polymers. To incorporate antifouling properties and enhance the biocompatibility of the coating, bioinspired zwitterionic compound 2-methacryloyloxyethyl phosphorylcholine (MPC) was chosen and benzoxaborole pendant containing zwitterionic polymer poly(MPC-st-MAABO) (MAABO: 5-methacrylamido-1,2-benzoxaborole) was synthesized. Additionally to impart antibacterial properties to the surface, a quaternary ammonium containing cationic polymer poly(2-(methacryloyloxy)ethyl trimethylammonium (META)-st-MAABO)) was synthesized. These synthesized polymers were covalently grafted to a polydopamine (PDA) coated surface by forming a strong cyclic boronic ester complex with a catechol group of the PDA layer endowing the surface with bacteria contact-killing properties and capturing specific protein. After the addition of cis-diol containing competitive molecules, i.e., saccharides/sugars, this boronic ester complex with a catechol group of PDA was replaced and the attached polymer layer was cleaved from the surface, resulting in the release of both absorbed protein and live/killed bacteria electrostatically attached to the polymer layer. This dynamic self-cleaning surface can be a promising material for biomedical applications avoiding the gathering of dead cells and debris that are typically encountered on a traditional biocidal surface.
Assuntos
Incrustação Biológica , Antibacterianos/química , Antibacterianos/farmacologia , Bactérias , Incrustação Biológica/prevenção & controle , Dopamina/farmacologia , Fosforilcolina/química , Fosforilcolina/farmacologia , Propriedades de SuperfícieRESUMO
Poly(ether ether ketone) (PEEK) has seen increasing use in biomedical fields as a replacement for metal implants. Accordingly, the surface functionalities of PEEK are important for the development of medical devices. We have focused on the application of photoinduced reactions in PEEK to immobilize a functional polymer via radical generation on the surface, which can react with hydrocarbon groups. In this study, we used zwitterionic copolymers comprising 2-methacryloyloxyethyl phosphorylcholine (MPC) units and n-butyl methacrylate (BMA) units with various molecular architectures for surface modification. A random copolymer (poly(MPC-co-BMA) (r-PMB)), an AB-type diblock copolymer (di-PMB), and an ABA-type triblock copolymer (tri-PMB) (A segment: poly(BMA); B segment: poly(MPC)) were synthesized with the same monomer compositions. All PMBs were successfully immobilized on the PEEK surface via UV irradiation after the dip-coating process, regardless of their molecular structure. In this reaction, the alkyl group of the BMA unit functioned as a photoreactive site on the PEEK surface. This indicates that the molecular structure differences affect the surface properties. For example, compared to r-PMB and tri-PMB, di-PMB-modified surfaces exhibited an extremely low water contact angle of approximately 10°. The findings of this study demonstrate that this surface functionalization method does not require a low-molecular-weight compound, such as an initiator, and can be applied to the surface of inert PEEK through a simple photoreaction under room temperature, atmospheric pressure, and dry state conditions.
Assuntos
Cetonas , Polímeros , Éter , Cetonas/química , Metacrilatos , Fosforilcolina/análogos & derivados , Fosforilcolina/química , Polímeros/químicaRESUMO
Epithelial barriers that seal cell gaps by forming tight junctions to prevent the free permeation of nutrients, electrolytes, and drugs, are essential for maintaining homeostasis in multicellular organisms. The development of nanocarriers that can permeate epithelial tissues without compromising barrier function is key for establishing a safe and efficient drug delivery system (DDS). Previously, we have demonstrated that a water-soluble phospholipid-mimicking random copolymer, poly(2-methacryloyloxyethyl phosphorylcholine30-random-nbutyl methacrylate70) (PMB30W), enters the cytoplasm of live cells by passive diffusion manners, without damaging the cell membranes. The internalization mechanism was confirmed to be amphiphilicity-induced membrane fusion. In the present study, we demonstrated energy-independent permeation of PMB30W through the model epithelial barriers of Madin-Darby canine kidney (MDCK) cell monolayers in vitro. The polymer penetrated epithelial MDCK monolayers via transcellular pathways without breaching the barrier functions. This was confirmed by our unique assay that can monitor the leakage of the proton as the smallest indicator across the epithelial barriers. Moreover, energy-independent transepithelial permeation was achieved when insulin was chemically conjugated with the phospholipid-mimicking nanocarrier. The bioactivity of insulin as a growth factor was found to be maintained even after translocation. These fundamental findings may aid the establishment of transepithelial DDS with advanced drug efficiency and safety. STATEMENT OF SIGNIFICANCE: A nanocarrier that can freely permeate epithelial tissues without compromising barrier function is key for successful DDS. Existing strategies mainly rely on paracellular transport associated with tight junction breakdown or transcellular transport via transporter recognition-mediated active uptake. These approaches raise concerns about efficiency and safety. In this study, we performed non-endocytic permeation of phospholipid-mimicking polymers through the model epithelial barriers in vitro. The polymer penetrated via transcytotic pathways without breaching the barriers of biomembrane and tight junction. Moreover, transepithelial permeation occurred when insulin was covalently attached to the nanocarrier. The bioactivity of insulin was maintained even after translocation. The biomimetic design of nanocarrier may realize safe and efficient transepithelial DDS.
Assuntos
Insulina , Polímeros , Animais , Cães , Células Epiteliais/metabolismo , Insulina/química , Fosfolipídeos/metabolismo , Polímeros/metabolismo , Junções Íntimas/metabolismo , TranscitoseRESUMO
The effects of differentiated cells on stem cell differentiation were analyzed via co-culturing using a cell-encapsulated double-layered hydrogel system. As a polymer hydrogel matrix, a water-soluble zwitterionic polymer having both a 2-methacryloyloxyethyl phosphorylcholine unit and a p-vinylphenylboronic acid unit (PMBV), was complexed spontaneously with poly(vinyl alcohol) (PVA) under mild cell culture conditions. The creep modulus of the hydrogel was controlled by changing the composition of the polymer in the solution. Mouse mesenchymal stem cells (MSCs), C3H10T1/2 cells, were encapsulated into PMBV/PVA hydrogels and cultured. In the PMBV/PVA hydrogel with a lower creep modulus (0.40 kPa), proliferation of C3H10T1/2 cells occurred, and the formation of cell aggregates was observed. On the other hand, a higher creep modulus (1.7 kPa) of the hydrogel matrix prevented cell proliferation. Culturing C3H10T1/2 cells encapsulated in the PMBV/PVA hydrogel in the presence of bone morphogenetic protein-2 increased the activity of intracellular alkaline phosphatase (ALP). This indicated that C3H10T1/2 cells differentiated into mature osteoblasts. When the C3H10T1/2 cells encapsulated in the PMBV/PVA hydrogel were cultured in combination with the mature osteoblasts in the hydrogel by a close contacting double-layered hydrogel structure, higher ALP activity was observed compared with the cells cultured separately. It was considered that the differentiation of C3H10T1/2 cells in the hydrogel layer was induced by cytokines diffused from mature osteoblasts encapsulated in another hydrogel layer. It could be concluded that the PMBV/PVA hydrogel system provides a good way to observe the effects of the surrounding cells on cell function in three-dimensional culture.
Assuntos
Hidrogéis , Células-Tronco Mesenquimais , Animais , Diferenciação Celular , Hidrogéis/química , Hidrogéis/farmacologia , Metacrilatos , Camundongos , Fosforilcolina/análogos & derivados , Polímeros/químicaRESUMO
A triblock copolymer (PEG-b-PUEM-b-PMPC; EUM) comprising poly(ethylene glycol) (PEG), thermo-responsive poly(2-ureidoethyl methacrylate) (PUEM), and poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) blocks was synthesized via controlled radical polymerization. PEG and PMPC blocks exhibit hydrophilicity and biocompatibility. The PUEM block exhibits an upper critical solution temperature (UCST). PMPC can dissolve hydrophobic fullerenes in water to form a complex by grinding PMPC and fullerene powders. Fullerene-C70 (C70) and EUM were ground in a mortar and phosphate-buffered saline (PBS) was added to synthesize a water-soluble complex (C70/EUM). C70/EUM has a core-shell-corona structure, whose core is a complex of C70 and PMPC, the shell is PUEM, and corona is PEG. The maximum C70 concentration dissolved in PBS was 0.313 g L-1 at an EUM concentration of 2 g L-1. The C70/EUM hydrodynamic radius (Rh) was 34 nm in PBS at 10 °C, which increased due to the PUEM block's UCST phase transition with increasing temperature, and Rh attained a constant value of 38 nm above 36 °C. An anticancer drug, doxorubicin, was encapsulated in the PUEM shell by hydrophobic interactions in C70/EUM at room temperature, which can be released by heating. The generation of singlet oxygen (1O2) from C70/EUM upon visible-light irradiation was confirmed using the singlet oxygen sensor green indicator. Water-soluble C70/EUM may be used as a carrier that releases encapsulated drugs when heated and as a photosensitizer for photodynamic therapy.