Biodegradable poly(lactic acid) blocked polyurethane/carbon nanotubes coated cotton fabric prepared by ultrasonic-assisted inkjet printing for high performance strain sensors.

In order to fulfill the demands for degradability, a broad working range, and heightened sensitivity in flexible sensors, biodegradable polyurethane (BTPU) was synthesized and combined with CNTs to produce BTPU/CNTs coated cotton fabric using an ultrasonic-assisted inkjet printing process. The synthesized BTPU displayed a capacity for degradation in a phosphate buffered saline solution, resulting in a weight loss of 25 % after 12 weeks of degradation. The BTPU/CNTs coated cotton fabric sensor achieved an extensive strain sensing range of 0-137.5 %, characterized by high linearity and a notable sensitivity (gauge factor (GF) of 126.8). Notably, it demonstrated a low strain detection limit (1 %), rapid response (within 280 ms), and robust durability, enabling precise monitoring of both large and subtle human body movements such as finger, wrist, neck, and knee bending, as well as swallowing. Moreover, the BTPU/CNTs coated cotton fabric exhibited favorable biocompatibility with human epidermis, enabling potential applications as wearable skin-contact sensors. This work provides insight into the development of degradable and high sensing performance sensors suitable for applications in electronic skins and health monitoring devices.

High Barrier Properties of Butyl Rubber Composites Containing Liquid Rubber and Graphene Oxide.

The high elasticity and excellent gas barrier properties of rubber composites make them irreplaceable in the field of sealing. Constructing a complicated barrier network to reduce free volume is crucial to improving gas barrier properties. In this research, liquid acrylonitrile-butadiene rubber/γ-Methacryloxypropyl trimethoxy silane (KH570) modified graphene oxide/butyl rubber composites (LNBR/KGO/IIR) were fabricated. A KGO lamellar network was constructed to resist gas diffusion in the IIR matrix. Meanwhile, LNBR macromolecules further occupied the free volume inside the IIR composites, thereby maximizing the retardation of the path of small molecule gas permeation. The modification of GO by KH570 was successfully demonstrated through FTIR and XRD. The grafting rate of KH570 was calculated to be approximately 71.4%. KGO was well dispersed in IIR due to emulsion compounding and the formation of lamellar networks. The 300% modulus, tensile strength and tear strength of KGO/IIR were improved by 43.5%, 39.1% and 14.8%, respectively, compared to those of the IIR composite. In addition, the introduction of LNBR resulted in a 44.2% improvement in the gas barrier performance of nitrogen permeability relative to the original IIR composite.

Carbon Nanotube Coated Fibrous Tubes for Highly Stretchable Strain Sensors Having High Linearity.

Strain sensors are currently limited by an inability to operate over large deformations or to exhibit linear responses to strain. Producing strain sensors meeting these criteria remains a particularly difficult challenge. In this work, the fabrication of a highly flexible strain sensor based on electrospun thermoplastic polyurethane (TPU) fibrous tubes comprising wavy and oriented fibers coated with carboxylated multiwall carbon nanotubes (CNTs) is described. By combining spraying and ultrasonic-assisted deposition, the number of CNTs deposited on the electrospun TPU fibrous tube could reach 12 wt%, which can potentially lead to the formation of an excellent conductive network with high conductivity of 0.01 S/cm. The as-prepared strain sensors exhibited a wide strain sensing range of 0-760% and importantly high linearity over the whole sensing range while maintaining high sensitivity with a GF of 57. Moreover, the strain sensors were capable of detecting a low strain (2%) and achieved a fast response time whilst retaining a high level of durability. The TPU/CNTs fibrous tube-based strain sensors were found capable of accurately monitoring both large and small human body motions. Additionally, the strain sensors exhibited rapid response time, (e.g., 45 ms) combined with reliable long-term stability and durability when subjected to 60 min of water washing. The strain sensors developed in this research had the ability to detect large and subtle human motions, (e.g., bending of the finger, wrist, and knee, and swallowing). Consequently, this work provides an effective method for designing and manufacturing high-performance fiber-based wearable strain sensors, which offer wide strain sensing ranges and high linearity over broad working strain ranges.

Constructing Chemical Interface Layers by Using Ionic Liquid in Graphene Oxide/Rubber Composites to Achieve High-Wear Resistance in Environmental-Friendly Green Tires.

The harm caused by small rubber particles generated from tire abrasion to the atmosphere is receiving a continuing concern. For developing environmental-friendly tire tread materials with high wear resistance, building the strong interface between nano-fillers and rubber matrix is the primary challenge. Herein, ionic liquid (IL, 1-allyl-3-methylimidazole chloride) was used to modify graphene oxide (GO) by π-cation interaction and hydrogen bonding between IL and GO. Furthermore, an IL-GO/natural rubber (NR) masterbatch possessing fine dispersion of GO was prepared by the emulsion compounding method, and thereafter, a further compound with solution polymerized styrene butadiene rubber (SSBR) was fabricated for the tread rubber composite. Results showed that the double bond in the IL enhanced the cross-linking reaction during the vulcanization of rubber composites occurred at high temperature, leading to an elevated interfacial interaction between the IL-modified GO and the rubber macromolecules. Compared with silicon dioxide (SiO2)-filled NR/SSBR composites, the cross-link density, 300% modulus, and tear strength of the IL-GO/SiO2/NR/SSBR composites were increased by 10.2, 42.6, and 20.2%, respectively. Importantly, the wear resistance of the IL-GO/SiO2/NR/SSBR composites was improved by 17.3%, ascribing to the strong interface between IL-GO and rubber macromolecules.

Effect of concrete slats, three mat types and out-wintering pads on performance and welfare of finishing beef steers.

BACKGROUND: The objective was to investigate the effect of placing mats on concrete slatted floors on performance, behaviour, hoof condition, dirt scores, physiological and immunological variables of beef steers, and to compare responses with animals on out-wintering pads. Continental crossbred beef steers [n = 360; mean (±SD) initial live weight 539 kg (42.2)] were blocked by breed and live weight and randomly assigned to one of five treatments; (1) Concrete slats alone, (2) Mat 1 (Natural Rubber structure) (Durapak Rubber Products), (3) Mat 2 (Natural rubber structure) (EasyFix), (4) Mat 3 (modified ethylene vinyl acetate (EVA) foam structure) and (5) Out-wintering pads (OWP's). RESULTS: Animals on the OWPs had a greater (P < 0.05) live weight gain (P < 0.05) compared with the slat and Mat 2 treatments: results for Mat 1 and Mat 3 were the same (P > 0.05) as the other treatments. Animals on the OWPs had reduced lying percentage time compared with all the other treatments. Dry matter (DM) intake was greater for animals on the OWPs compared with all the other treatments. Carcass weight, kill out proportion, carcass fat score, carcass composition score, FCR and physiological responses were similar (P > 0.05) among treatments. No incidence of laminitis was observed among treatments. The number of hoof lesions was greater on all mat types (P < 0.05) compared with concrete slats and OWP treatments. Dirt scores were greater (P < 0.05) for animals on OWPs when measured on days 42, 84, 105, 126 and 150 compared with animals on slats. CONCLUSIONS: Under the conditions adopted for the present study, there was no evidence to suggest that animals housed on bare concrete slats were disadvantaged in respect of animal welfare compared with animals housed on other floor types. It is concluded that the welfare of steers was not adversely affected by slats compared with different mat types or OWPs.

Investigation into the electromechanical properties of dielectric elastomers subjected to pre-stressing.

Dielectric elastomers (DEs) are being exploited for biological applications such as artificial blood pumps, biomimetic grippers and biomimetic robots. Generally, polyacrylate and silicone rubber (SR) are the most widely used materials for fabricating DEs in terms of mixing with other polymers or compounding them with highly dielectric particles. Furthermore, pre-stretch offers an effective approach to increasing actuated strain and dielectric strength and eliminating 'pull-in' instability. In the work described here, a comparison in electromechanical properties was made between SR/10% barium titanate (BaTiO3) and commercial VHB 4910. Trends in these dielectric parameters are shown graphically for variation in pre-stretch ratio (λpre). It was found that permittivity of SR/10% BaTiO3 was independent of frequency, whereas permittivity was frequency-independent due to the polarization of polymer chains. The maximum deformation and the coupling efficiency for SR/10% BaTiO3 can be achieved at a pre-stretch ratio between 1.6 and 1.9. For VHB 4910, they can be obtained in the pre-stretch ratio range from 2.6 to 3.0. A maximum energy density of 0.05MJ/m(3) was achieved by SR/10% BaTiO3 (λpre=1.6) and VHB 4910 (λpre=3.4). The findings provide an insight into critical pre-stretch ratios required for a range of applications of DEs based on silicone and the commercially available polyacrylate VHB 4910.

The Tromped: a solution for flight-related deep vein thrombosis?

Flight-related deep vein thrombosis (DVT) is well recognized. Reduced venous return occurs during immobility. This alteration in venous hemodynamics may contribute to DVT development. A prototype design of an in-flight exercise device to stimulate ambulatory bloodflow while seated has been developed, consisting of a foot pedal attached to a base by a hinge mechanism. Four devices of differing resistance were evaluated. Calf muscle pump function was assessed by air plethysmography in 10 healthy volunteers. Ejection volume fraction and RVF were determined in the standing position (control values) and were compared with those achieved by depression of the 4 devices while seated. Similar EVF and RVF values were achieved by the control and 2 of the devices. Plantar flexion against a predetermined resistance can effectively activate the calf muscle pump while seated and may reduce the incidence of flight-related DVT.