Factors predicting the return of spontaneous circulation rate of cardiopulmonary resuscitation in China: Development and evaluation of predictive nomogram.

Background: This study aimed to construct and internally validate a probability of the return of spontaneous circulation (ROSC) rate nomogram in a Chinese population of patients with cardiac arrest (CA). Methods: Patients with CA receiving standard cardiopulmonary resuscitation (CPR) were studied retrospectively. The minor absolute shrinkage and selection operator (LASSO) regression analysis and multivariable logistic regression evaluated various demographic and clinicopathological characteristics. A predictive nomogram was constructed and evaluated for accuracy and reliability using C-index, the area under the receiver operating characteristic curve (AUC), calibration plot, and decision curve analysis (DCA). Results: A cohort of 508 patients who had experienced CA and received standard CPR was randomly divided into training (70 %, n = 356) and validation groups (30 %, n = 152) for the study. LASSO regression analysis and multivariable logistic regression revealed that thirteen variables, such as age, CPR start time, Electric defibrillation, Epinephrine, Sodium bicarbonate (NaHCO3), CPR Compression duration, The postoperative prothrombin (PT) time, Lactate (Lac), Cardiac troponin (cTn), Potassium (K+), D-dimer, Hypertension (HBP), and Diabetes mellitus (DM), were found to be independent predictors of the ROSC rate of CPR. The nomogram model showed exceptional discrimination, with a C-index of 0.933 (95 % confidence interval: 0.882-0.984). Even in the internal validation, a remarkable C-index value of 0.926 (95 % confidence interval: 0.875-0.977) was still obtained. The accuracy and reliability of the model were also verified by the AUC of 0.923 in the training group and 0.926 in the validation group. The calibration curve showed the model agreed with the actual results. DCA suggested that the predictive nomogram had clinical utility. Conclusions: A predictive nomogram model was successfully established and proved to identify the influencing factors of the ROSC rate in patients with CA. During cardiopulmonary resuscitation, adjusting the emergency treatment based on the influence factors on ROSC rate is suggested to improve the treatment rate of patients with CA.

Obacunone improves dihydrotestosterone-induced androgen alopecia by inhibiting androgen receptor dimerization.

BACKGROUND: Dihydrotestosterone-induced androgen receptor activation and nuclear translocation was identified as the key event in androgen alopecia, which led to dermal papilla cell damage and hair growth cycle arrest. Inhibiting androgen receptor activation or nuclear translocation thus represents a potential therapeutic strategy for reducing dermal papilla cell damage and treating androgen alopecia. PURPOSE: To evaluate the effects of obacunone androgen alopecia and explore the potential underlying mechanisms. METHODS: The effects of obacunone on androgen receptor activation and changes in the properties of dermal papilla cells were investigated. Meanwhile, the effects of obacunone on transforming growth factor-ß-induced hair follicle stem cell damage and on androgen alopecia mice induced by dihydrotestosterone were evaluated. RESULTS: Obacunone can competitively bind to androgen receptors with dihydrotestosterone, thereby alleviating the androgen receptor dimerization and nuclear translocation. The negative effects of dihydrotestosterone on dermal papilla cell apoptosis, senescence, and cycle arrest were alleviated by obacunone. Obacunone also counteracted the proliferation and apoptosis of transforming growth factor-ß-mediated hair follicle stem cells. In mice with androgen alopecia, treatment with obacunone promoted mice hair growth and inhibited TGF-ß/smad signaling. CONCLUSION: Thus, inhibiting androgen receptor dimerization was found to be an effective strategy for alleviating androgen alopecia. Obacunone follows a novel mechanism and holds potential as a drug candidate for androgen alopecia through inhibition of the dimerization of the androgen receptor. This targeting strategy may provide a new avenue for the development of new drugs different from the existing therapeutic approaches.

A review of liquid crystal monomers (LCMs) as emerging contaminants: Environmental occurrences, emissions, exposure routes and toxicity.

The widespread occurrence of liquid crystal monomers (LCMs) in the environment has raised concerns about their persistence, bioaccumulation, and toxicity (PBT). Here we review the lifecycle of environmental LCMs, focusing on their occurrences, emission sources, human exposure routes, and toxicity. Industrial emissions from Liquid Crystal Display (LCD) manufacturing and e-waste recycling are the primary point sources of LCMs. In addition, emissions from LCD products, air conditioning units, wastewater treatment plants, and landfills contribute to environmental occurrence of LCMs as secondary sources. Dietary routes were identified as the primary exposure pathways to humans. E-waste dismantling workers and infants/children are vulnerable populations to LCMs exposure. Exposure to LCMs has been shown to potentially induce oxidative stress, metabolic disorders, and endocrine disruption. Accumulation of LCMs in the brain and liver tissues of exposed animals highlights the need for toxicokinetic studies.

The Impact of Cardiovascular Disease Gene Polymorphism and Interaction with Homocysteine on Deep Vein Thrombosis.

Deep vein thrombosis (DVT) affects vascular health and can even threaten life; however, its pathogenesis remains unclear. Cardiovascular disease (CVD) and DVT share common risk factors, such as dyslipidemia, aging, etc. We aimed to investigate the loci of published CVD susceptibility genes and their association with environmental factors that might be related to DVT. Genotyping by Kompetitive Allele Specific PCR (KASP), collection of lifestyle information, and determination of blood biochemical markers were performed in 165 DVT cases and 164 controls. The impact of six single nucleotide polymorphisms (SNPs) and additional potential variables on DVT morbidity was evaluated using unconditional logistic regression (ULR). To explore the high-order interactions related to genetics and the body's internal environment exposure that affect DVT, ULR, crossover analysis, and multifactor dimensionality reduction/generalized multifactor dimensionality reduction (MDR/GMDR) were employed. Sensitivity analyses were performed using the EpiR package. The polymorphisms of FGB rs1800790 and PLAT rs2020918 were significantly associated with DVT. The optimum GMDR interaction model for gene-gene (G × G) consisted of THBD rs1042579, PLAT rs2020918, and PON1 rs662. The PLAT rs2020918 and MTHFR rs1801133 polymorphisms together eliminated the maximum entropy by the MDR method. The optimum GMDR interaction model for gene-environment (G × E) consisted of MTHFR rs1801133, FGB rs1800790, PLAT rs2020918, PON1 rs662, and total homocysteine (tHcy). Those with high tHcy levels and three risk genotypes significantly increased the DVT risk. In conclusion, certain CVD-related SNPs and their interactions with tHcy may contribute to DVT. These have implications for investigating DVT etiology and developing preventive treatment plans.

Design of a Thermally Stable Heat-Resistant (Al2O3+Al3Ti)/Al Composite with Excellent High-Temperature Mechanical Properties: Multimechanism Synergistic Strengthening Strategy.

The effectiveness of the room-temperature strengthening strategy for aluminum (Al) is compromised at increased temperatures due to grain and precipitate phase coarsening. Overcoming the heightened activity of grain boundaries and dislocations poses a significant challenge in enhancing the high-temperature strength through traditional precipitation strengthening. This study presents novel strengthening strategies that integrate intergranular reinforcements, intragranular reinforcements, refined grain, and stacking faults within an (Al2O3+Al3Ti)/Al composite prepared using sol-gel and powder metallurgy technology. Excellent high-temperature tensile properties are achieved; also, a remarkable fatigue performance at increased temperatures that surpasses those of other existing Al alloys and composites is revealed. These superior characteristics can be attributed to its exceptionally stable microstructure and the synergistic strengthening mechanisms mentioned above. This work offers new insights into designing and fabricating thermally stable Al matrix composites for high-temperature applications.

Development of an anisotropic polarizable model for the all-atom AMOEBA force field.

For planar and rigid π-conjugated molecular systems, electrostatic and inductive interactions are pivotal in governing molecular packing structures and electron polarization energies. These electrostatic interactions typically exhibit an anisotropic nature within π-conjugated systems. In this study, we utilize the atoms in molecules (AIM) theory in conjunction with linear response theory to decompose molecular polarizability into distributed atomic polarizability tensors. On the basis of atomic polarizability tensors, we extended an anisotropic polarizable model into the AMOEBA polarizable force field. Both anisotropic and isotropic polarizable models in combination with various density functional theory (DFT)-derived atomic multipoles were applied to optimize the experimental crystals of naphthalene and anthracene. Furthermore, these two types of electrostatic models, coupled with the evolutionary algorithm USPEX program, are utilized to predict the crystal structures of oligoacenes. Our findings demonstrate that the anisotropic polarizable model exhibits superior performance in crystal refinement and crystal structure prediction. This enriched anisotropic polarizable model is seamlessly integrated into the AMOEBA polarizable force field and readily applicable within our modified Tinker program.

Novel Strategy for Human Deep Vein Thrombosis Diagnosis Based on Metabolomics and Stacking Machine Learning.

Deep vein thrombosis (DVT) is a serious health issue that often leads to considerable morbidity and mortality. Diagnosis of DVT in a clinical setting, however, presents considerable challenges. The fusion of metabolomics techniques and machine learning methods has led to high diagnostic and prognostic accuracy for various pathological conditions. This study explored the synergistic potential of dual-platform metabolomics (specifically, gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)) to expand the detection of metabolites and improve the precision of DVT diagnosis. Sixty-one differential metabolites were identified in serum from DVT patients: 22 from GC-MS and 39 from LC-MS. Among these, five key metabolites were highlighted by SHapley Additive exPlanations (SHAP)-guided feature engineering and then used to develop a stacking diagnostic model. Additionally, a user-friendly interface application system was developed to streamline and automate the application of the diagnostic model, enhancing its practicality and accessibility for clinical use. This work showed that the integration of dual-platform metabolomics with a stacking machine learning model enables faster and more accurate diagnosis of DVT in clinical environments.

Real space method for HAADF image simulation.

A new real space HAADF simulation method was described in detail and a Real Space- STEM software was developed based on the new simulation method. The algorithm of the real space method can quickly calculate and simulate the microstructure images of complex crystals. The Real Space-STEM software developed in this paper has the functions of HRTEM and HAADF image simulation based on the real space method. By using this software to simulate high-resolution images of representative crystal materials from each crystal system, the HAADF images are both accurate and efficient. The effect of STEM parameters on HAADF imaging has been discussed using simulation results.

Oxolinic Acid Generated Green Fluorescence Based on a Terbium-Functionalized Covalent Organic Framework.

Oxolinic acid (OXO), a classic environmental contaminant, has a terrible detrimental effect on human health. The exploration of efficient strategies to detect and detecting OXO has remarkable significance. Herein, we reported a novel terbium(III)-functionalized covalent organic framework (Bpy-DhBt-COF@Tb3+) by fixing Tb3+ on the bipyridine-connecting COF (Bpy-DhBt-COF) as a turn-on fluorescent switch toward OXO for the first time. In this platform, Tb3+ acts as the specific recognition units for OXO and the response signal, while Bpy-DhBt-COF acts as the safehaven for Tb3+. Once introducing OXO to Bpy-DhBt-COF@Tb3+, OXO can instead water molecules coordinate with Tb3+ and sensitize Tb3+ instantly, thereby producing a significant fluorescence signal. Profiting from the excellent porosity of Bpy-DhBt-COF@Tb3+, it can obtain optimal response toward OXO only within 10 s with an ultrasensitive detection limit of 12.5 nM. Furthermore, Bpy-DhBt-COF@Tb3+ displayed outstanding selectivity toward OXO than other general quinolones. Based on these, a Tb3+-based COF was explored for the first time for the turn-on fluorescence detection of an OXO with rapid response, high sensitivity, and outstanding selectivity. In this work, we not only exhibit the attractive performance of Tb3+-functionalized COF to detect OXO but also propose a prospect strategy for creating other fluorescent sensors for multiple targets.

[Chemical constituents from Alangium chinense subsp. pauciflorum].

Chemical constituents of 70% ethanol extract of Alangium chinense subsp. pauciflorum were investigated. The 70% ethanol extract of A. chinense subsp. pauciflorum was isolated and purified by D-101 macroporous resins, silica gel, Sephadex LH-20 and other methods. As a result, nineteen compounds were isolated and identified as 4-cyclohexene-1α,2α,3α-triol-1-O-ß-D-glucoside(1), 1ß,4α,6α,13-tetrahydroxy-eudesm-11(12)-ene(2), sucrose(3), 1'-O-benzyl-α-L-rhamnopyranosyl-(1″→6')-ß-D-glucopyranoside(4), bis(2-ethylhexyl)benzene-1,2-dicarboxylate(5),(Z)-10-heneicosenoic acid(6), di-O-methylcrenati(7), methyl-α-D-fructofuranoside(8), ß-daucosterol(9), syringic acid(10), vanillicacid(11), octacosanol(12), isoarborinol(13), 2,7-dihydroxy-6-methyl-4-(1-methylethyl)-1-naphthalenecarboxylate(14),vanillin(15), coniferyl aldehyde(16), 9(11)-dehydroergosterolperoxide(17), 5α,8α-epidioxy-(22E,24R)-ergosta-6,22-dien-3ß-ol(18), ß-sitosterol(19), respectively. Compounds 1 and 2 were new compounds, compounds 5-11, 13, 15-18 were isolated from Alangium for the first time.The anti-inflammatory activity of compourd 1 was determinded by the LPS-induced RAW264.7 macrophage inflammation model. The results showed that the new compound 1 has a certain inhibitory effect on LPS-induced NO production of RAW264.7 cells, and the inhibitory rate was 54.57%.

Evaluation of vector susceptibility in Aedes aegypti and Culex pipiens pallens to Tibet orbivirus.

Mosquito-borne viruses cause various infectious diseases in humans and animals. Tibet orbivirus (TIBOV), a newly identified arbovirus, efficiently replicates in different types of vertebrate and mosquito cells, with its neutralizing antibodies detected in cattle and goats. However, despite being isolated from Culicoides midges, Anopheles, and Culex mosquitoes, there has been a notable absence of systematic studies on its vector competence. Thus, in this study, Aedes aegypti and Culex pipiens pallens were reared in the laboratory to measure vector susceptibility through blood-feeding infection. Furthermore, RNA sequencing was used to examine the overall alterations in the Ae. aegypti transcriptome following TIBOV infection. The results revealed that Ae. aegypti exhibited a high susceptibility to TIBOV compared to Cx. p. pallens. Effective replication of the virus in Ae. aegypti midguts occurred when the blood-feeding titer of TIBOV exceeded 105 plaque-forming units mL-1. Nevertheless, only a few TIBOV RNA-positive samples were detected in the saliva of Ae. aegypti and Cx. p. pallens, suggesting that these mosquito species may not be the primary vectors for TIBOV. Moreover, at 2 dpi of TIBOV, numerous antimicrobial peptides downstream of the Toll and Imd signaling pathways were significantly downregulated in Ae. aegypti, indicating that TIBOV suppressed mosquitos' defense to survive in the vector at an early stage. Subsequently, the stress-activated protein kinase JNK, a crucial component of the MAPK signaling pathway, exhibited significant upregulation. Certain genes were also enriched in the MAPK signaling pathway in TIBOV-infected Ae. aegypti at 7 dpi.IMPORTANCETibet orbivirus (TIBOV) is an understudied arbovirus of the genus Orbivirus. Our study is the first-ever attempt to assess the vector susceptibility of this virus in two important mosquito vectors, Aedes aegypti and Culex pipiens pallens. Additionally, we present transcriptome data detailing the interaction between TIBOV and the immune system of Ae. aegypti, which expands the knowledge about orbivirus infection and its interaction with mosquitoes.

Improved Cycling Stability of Ni-Rich Cathode Material by In Situ Introduced TM-B-O Amorphous Surface Structure.

Current research has found the amorphous/crystal interface has some unexpected electrochemical behaviors. This work designed a surface modification strategy using NaBH4 to induce in situ conversion of the surface structure of Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) into TM-B-O amorphous interface layer. Oxidizing the surface from transition metals (TM) with high valence and reductive BH4- in a weak polar medium of ethanol results in an easy redox reacton. A TM-B-O amorphous structure is formed on NCM811 surface. The action of reactive wetting ensures a complete and uniform structure evolution of the surface crystals. The complete coverage protects the outer crystal and the heterogeneous interface impedance between the modified layer and bulk is reduced. More importantly, this amorphous interface layer through in situ conversion enhances the heterogeneous link at interface and its own structural stability. The modified NCM811 (TB2@NCM) treated with 1 wt % NaBH4 shows excellent electrochemical performance, especially cyclic stability. At a high cutoff voltage of 4.5 V, the capacity retention was 72.5% at 1 C after 500 cycles. The electrode achieves 173.7 mAh·g-1 at 10 C. This work creates a modifying strategy with potential application prospect due to simple technology with low-cost raw material under mild operating conditions.

Prognostic and immunological role of adaptor related protein complex 3 subunit mu2 in colon cancer.

The expression levels and prognostic role of AP3M2 in colorectal adenocarcinoma (CRAC) have yet to be fully unveiled. Our study comprehensively investigated the clinical significance of AP3M2 in colorectal cancer through an extensive bioinformatics data mining process (TCGA, GEO, GEPIA, Timer, Ualcan, ROCPLOT, and David), followed by experimental validation. We found AP3M2 is a cancer gene, which can be used to distinguish between colorectal cancer and colorectal adenomas, liver metastasis, lung metastasis, colorectal polyp. Higher AP3M2 expression levels were associated with longer overall survival in colon adenocarcinoma. AP3M2 might be the primary biomarker for oxaliplatin in colon cancer and an acquired resistance biomarker for oxaliplatin and 5-fu. AP3M2 was positively associated with CD274, CTLA4. AP3M2 might be associated with T-cell, NF-kappaB transcription factor activity, and response to hypoxia. AP3M2 could predict chemotherapy effectiveness and prognosis for colon cancer patients. AP3M2 might inhibit tumor growth via influencing tumor-infiltrating immune cells in the context of Tumor microenvironment. AP3M2 plays as an oncogene in CRAC and is suggested as a new potential biotarget for therapy.

Novel ratio-expressions of genes enables estimation of wound age in contused skeletal muscle.

Given that combination with multiple biomarkers may well raise the predictive value of wound age, it appears critically essential to identify new features under the limited cost. For this purpose, the present study explored whether the gene expression ratios provide unique time information as an additional indicator for wound age estimation not requiring the detection of new biomarkers and allowing full use of the available data. The expression levels of four wound-healing genes (Arid5a, Ier3, Stom, and Lcp1) were detected by real-time polymerase chain reaction, and a total of six expression ratios were calculated among these four genes. The results showed that the expression levels of four genes and six ratios of expression changed time-dependent during wound repair. The six expression ratios provided additional temporal information, distinct from the four genes analyzed separately by principal component analysis. The overall performance metrics for cross-validation and external validation of four typical prediction models were improved when six ratios of expression were added as additional input variables. Overall, expression ratios among genes provide temporal information and have excellent potential as predictive markers for wound age estimation. Combining the expression levels of genes with ratio-expression of genes may allow for more accurate estimates of the time of injury.

Degradation of organic UV filters in the water environment: A concise review on the mechanism, toxicity, and technologies.

Organic ultraviolet filters (OUVFs) have been used globally for the past 20 years. Given that OUVFs can be quickly released from sunscreens applied on human skins, they have been frequently detected in aquatic environments and organisms. Some byproducts of OUVFs might be more recalcitrant and toxic than their parent compounds. To further assess the toxicity and potential risk of OUVFs' byproducts, it is necessary to determine the fate of OUVFs and identify their transformation products. This review summarizes and analyzes pertinent literature and reports in the field of OUVFs research. These published research works majorly focus on the degradation mechanisms of OUVFs in aquatic environments, their intermediates/byproducts, and chlorination reaction. Photodegradation (direct photolysis, self-sensitive photolysis and indirect photolysis) and biodegradation are the main transformation pathways of OUVFs through natural degradation. To remove residual OUVFs' pollutants from aqueous environments, novel physicochemical and biological approaches have been developed in recent years. Advanced oxidation, ultrasound, and bio-based technologies have been proven to eliminate OUVFs from wastewaters. In addition, the disinfection mechanism and the byproducts (DBPs) of various OUVFs in swimming pools are discussed in this review. Besides, knowledge gaps and future research directions in this field of study are also mentioned.

Occurrence, behavior and fate of liquid crystal monomers in municipal wastewater.

Liquid crystal monomers (LCMs), the essential substances used in the display screen of electronic devices, have been proposed as a class of emerging chemicals of concern. Despite their detection in various environmental matrices, little is known about the presence of LCMs in municipal sewage systems. This study aimed to investigate the occurrence, distribution, and fate of 64 LCMs released into the aqueous environment from a municipal wastewater treatment plant (WWTP) in Hong Kong, China. In total 14 LCMs were detected in WWTP samples. Specifically, the Σ14LCMs concentrations in crude influent, final effluent, and final sludge were found to be 16.8 ± 0.3 ng/L, 2.71 ± 0.05 ng/L, and 19.2 ± 1.0 ng/g dry weight, respectively. Among them, 10 fluorinated LCMs (F-LCMs) were determined to be present at concentrations of 8.90 ± 0.10 ng/L, 1.69 ± 0.05 ng/L, and 9.94 ± 1.00 ng/g dry weight, respectively. The predominant non-fluorinated LCMs (NF-LCMs) detected in all samples were 3OCB and EPhEMOB, while 2OdF3B was the dominant F-LCM. The overall removal rate of total LCMs was 83.8 ± 0.3 %, with 25.4 ± 4.8 % being removed by biodegradation and UV treatment. Compared to NF-LCMs, F-LCMs were more resistant to biodegradation. Despite the significant removal of LCMs through WWTP, the remaining LCMs in final effluent could result in an annual emission of 3.04 kg of total LCMs from the population of Hong Kong. This study provides the first evidence of LCMs contamination in municipal wastewater, possibly arising from routine electronic devices usage. Further investigation is needed to elucidate the potential impact of LCMs emission via WWTP effluent on the aquatic receiving ecosystem.

Prognostic and immunological role of acetaldehyde dehydrogenase 1B1 in human tumors: A pan-cancer analysis.

Acetaldehyde dehydrogenases (ALDH) 1B1 is associated with a poor prognosis in pancreatic cancer, colorectal cancer, and osteosarcoma. Overexpression of ALDH also impairs tumor immunity. However, it is unclear how ALDH1B1 is associated with patient prognosis and immune infiltration in different cancer types. This is an original research based on bioinformatics analysis. In this study, we investigated the expression and prognostic value of ALDH1B1 in pan-cancer specimens using several databases, including GEPIA2 and Kaplan-Meier Plotter. The GEPIA2 and TIMER2 databases were used to explore correlations between ALDH1B1 expression and immune infiltration in cancers, especially head and neck squamous cell carcinoma (HNSC) and stomach adenocarcinoma (STAD). Finally, the expression of ALDH1B1 was validated by qPCR and immunohistochemistry. The expression of ALDH1B1 differed in most cancers compared to normal tissue controls. ALDH1B1 has an important impact on the prognosis different cancer types, and the high expression of ALDH1B1 is inversely associated with survival in patients with HNSC. A significant positive correlation was identified between ALDH1B1 expression in HNSC and immune infiltration. The poor prognosis associated with high expression of ALDH1B1 may be related to the promotion of M2 polarization of tumor-associated macrophages. Furthermore, markers of immune cell infiltration, such as exhausted T cells and regulatory T cells showed different patterns of ALDH1B1-associated immune infiltration. ALDH1B1 can serve as a prognostic biomarker in pan-cancer types and is correlated with immune infiltration.

Identification of Transformation Products of Organic UV Filters by Photooxidation and Their Differential Estrogenicity Assessment.

Organic ultraviolet filters (OUVFs) are extensively released into aquatic environments, where they undergo complex phototransformation. However, there is little knowledge regarding their transformation products (TPs) and associated endocrine disruption potentials. In the present study, we characterized the chemical and toxicological profiles of TPs for two common OUVFs, oxybenzone (BP3) and ethylhexyl methoxycinnamate (EHMC), by photooxidation under environmentally relevant conditions. It is hypothesized that TPs of the tested OUVFs will show varied estrogenicity at different reaction times. High-resolution liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) identified 17 TPs of 7 m/z for BP-3 and 13 TPs of 8 m/z for EHMC at confidence levels ≤2. Five novel TPs of 2 m/z were reported for the first time with structure-diagnostic MS/MS spectra. Estrogenicity assessment using the MCF-7-luc cell line showed discrepant estrogenic activities exhibited by OUVF-TPs over time. Specifically, BP3-TPs exhibited significantly greater estrogenicity than the parent at several reaction times, whereas EHMC-TPs displayed fluctuating estrogenicity with a declining trend. Correlation analysis coupled with molecular docking simulations further suggested several TPs of BP3 as potential endocrine disruptive compounds. These findings underscore the necessity of considering mixtures during chemical testing and risk assessment and highlight the potentially greater risks associated with post-transformation cocktails.

Cracking and damage analysis of a masonry structure based on joint masonry model caused by a obliquely undercrossing tunnel.

The damage variation of a masonry structure during shield tunneling has been investigated. Furthermore, the damage degree of the masonry building has been investigated by combining the field measurement, finite element method results, and theoretical method. The results show that compared with the theoretical calculation method LSTM, the method provide by this paper can give the detail damage location of the masonry structure caused by shield construction. Due to the existence of door and window openings, the result of JMM is larger than LSTM result, the differences can be modified by concept of "characteristic tensile strain". The wall of the masonry building encounter the shield face first suffers more damage than the later ones. At the beginning of tunnlling, the damage were generated from a small area at the bottom for wall 1, but a larger area at the top of the building for wall 2. The damage area increase more at the top of the building as tunneling advanced, but the maximum damage occurred at the bottom of the building.

Liquid crystal monomers in ventilation and air conditioning dust: Indoor characteristics, sources analysis and toxicity assessment.

Indoor dust contaminated with liquid crystal monomers (LCMs) released from various commercial liquid crystal display (LCD) screens may pose environmental health risks to humans. This study aimed to investigate the occurrence of 64 LCMs in ventilation and air conditioning filters (VACF) dust, characterize their composition profiles, potential sources, and associations with indoor characteristics, and assess their in vitro toxicity using the human lung bronchial epithelial cells (BEAS-2B). A total of 31 LCMs with concentrations (ΣLCMs) ranging from 43.7 ng/g to 448 ng/g were detected in the collected VACF dust. Additional analysis revealed the potential interactions between indoor environmental conditions and human exposure risks associated with the detected LCMs in VACF dust. The service area and working time of the ventilation and air conditioning system, and the number of indoor LCD screens were positively correlated with the fluorinated ΣLCMs in VACF dust (r = 0.355 âˆ¼ 0.511, p < 0.05), while the associations with the non-fluorinated ΣLCMs were not found (p > 0.05), suggesting different environmental behavior and fates of fluorinated and non-fluorinated LCMs in the indoor environment. Four main indoor sources of LCMs (i.e., computer (37.1%), television (28.3%), Brand A smartphone (21.2%) and Brand S smartphone (13.4%)) were identified by positive matrix factorization-multiple linear regression (PMF-MLR). Exposure to 14 relatively frequently detected LCMs, individually and in the mixture, induced significant oxidative stress in BEAS-2B cells. Among them, non-fluorinated LCMs, specifically 3cH2B and MeP3bcH, caused dominant decreased cell viability. This study provides new insights into the indoor LCMs pollution and the associated potential health risks due to the daily use of electronic devices.