RESUMO
Accurate 3D image recognition, critical for autonomous driving safety, is shifting from the LIDAR-based point cloud to camera-based depth estimation technologies driven by cost considerations and the point cloud's limitations in detecting distant small objects. This research aims to enhance MDE (Monocular Depth Estimation) using a single camera, offering extreme cost-effectiveness in acquiring 3D environmental data. In particular, this paper focuses on novel data augmentation methods designed to enhance the accuracy of MDE. Our research addresses the challenge of limited MDE data quantities by proposing the use of synthetic-based augmentation techniques: Mask, Mask-Scale, and CutFlip. The implementation of these synthetic-based data augmentation strategies has demonstrably enhanced the accuracy of MDE models by 4.0% compared to the original dataset. Furthermore, this study introduces the RMS (Real-time Monocular Depth Estimation configuration considering Resolution, Efficiency, and Latency) algorithm, designed for the optimization of neural networks to augment the performance of contemporary monocular depth estimation technologies through a three-step process. Initially, it selects a model based on minimum latency and REL criteria, followed by refining the model's accuracy using various data augmentation techniques and loss functions. Finally, the refined model is compressed using quantization and pruning techniques to minimize its size for efficient on-device real-time applications. Experimental results from implementing the RMS algorithm indicated that, within the required latency and size constraints, the IEBins model exhibited the most accurate REL (absolute RELative error) performance, achieving a 0.0480 REL. Furthermore, the data augmentation combination of the original dataset with Flip, Mask, and CutFlip, alongside the SigLoss loss function, displayed the best REL performance, with a score of 0.0461. The network compression technique using FP16 was analyzed as the most effective, reducing the model size by 83.4% compared to the original while maintaining the least impact on REL performance and latency. Finally, the performance of the RMS algorithm was validated on the on-device autonomous driving platform, NVIDIA Jetson AGX Orin, through which optimal deployment strategies were derived for various applications and scenarios requiring autonomous driving technologies.
RESUMO
For autonomous driving, it is imperative to perform various high-computation image recognition tasks with high accuracy, utilizing diverse sensors to perceive the surrounding environment. Specifically, cameras are used to perform lane detection, object detection, and segmentation, and, in the absence of lidar, tasks extend to inferring 3D information through depth estimation, 3D object detection, 3D reconstruction, and SLAM. However, accurately processing all these image recognition operations in real-time for autonomous driving under constrained hardware conditions is practically unfeasible. In this study, considering the characteristics of image recognition tasks performed by these sensors and the given hardware conditions, we investigated MTL (multi-task learning), which enables parallel execution of various image recognition tasks to maximize their processing speed, accuracy, and memory efficiency. Particularly, this study analyzes the combinations of image recognition tasks for autonomous driving and proposes the MDO (multi-task decision and optimization) algorithm, consisting of three steps, as a means for optimization. In the initial step, a MTS (multi-task set) is selected to minimize overall latency while meeting minimum accuracy requirements. Subsequently, additional training of the shared backbone and individual subnets is conducted to enhance accuracy with the predefined MTS. Finally, both the shared backbone and each subnet undergo compression while maintaining the already secured accuracy and latency performance. The experimental results indicate that integrated accuracy performance is critically important in the configuration and optimization of MTL, and this integrated accuracy is determined by the ITC (inter-task correlation). The MDO algorithm was designed to consider these characteristics and construct multi-task sets with tasks that exhibit high ITC. Furthermore, the implementation of the proposed MDO algorithm, coupled with additional SSL (semi-supervised learning) based training, resulted in a significant performance enhancement. This advancement manifested as approximately a 12% increase in object detection mAP performance, a 15% improvement in lane detection accuracy, and a 27% reduction in latency, surpassing the results of previous three-task learning techniques like YOLOP and HybridNet.
