Ultrasound-Assisted Advanced Oxidation Process Using Perovskite-Type LaMnO3 Nanospheres.

Among the perovskite oxide community, La-based perovskites have garnered considerable interest due to their remarkable properties including catalytic, electrocatalytic, photocatalytic, sensing, electrical, magnetic, and optical characteristics. Herein, rhodamine-B (RB) dye has been reported to be sono-catalytically decomposed by an ultrasound-assisted advanced oxidation process (AOP) using perovskite-type LaMnO3 (LMO) nanospheres synthesized via ultrasonic approach. Several physiochemical characterizations such as XRD, FT-IR, XPS, SEM, TEM, and SEM-EDS investigations were used to investigate the LMO perovskite nanospheres. Then, LMO potential for adsorption and the sonocatalytic decolorization of RB dye in an aqueous solution are examined. With LMO perovskites, the adsorption and removal kinetics of RB correspond to the pseudo-first-order model. Furthermore, by utilizing the pseudo-first-order, the RB dye process is removed with improved efficacy in the following sequence: Agitation alone: 3.76×10-4 min-1

An iron metal-organic framework-based electrochemical sensor for identification of Bisphenol-A in groundwater samples.

Bisphenol A (BPA) is an endocrine disruptor that leaches into food and is significantly employed in food and beverage storage, and source water cycles. To ensure an outstanding and sustainable biosphere while safeguarding human health and well-being, BPA detection is essential, necessitating an efficient detection methodology. Here, we describe an easy-to-use, inexpensive, and overly sensitive electrochemical detector that uses Fe-MOF nanotextures for identifying BPA in groundwater. This sensing electrode device combines the excellent guest interaction potential of organic ligands with the substantial surface area of metal. Using various analytical techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), and powder X-ray diffraction (XRD), the structural and physicochemical behaviors of the as-synthesized material were evaluated. Electrochemical BPA detection was enabled by a diffusion-controlled oxidation procedure with a comparable number of both protons and electrons. With a 0.1 µM detection limit, the sensor displayed a linear sensitivity of around 0.1 µM and 15 µM. Additionally, the sensors demonstrated an outstanding recovery with actual water samples as well as a repeatable and steady performance over the course of a month exhibiting minimal interference from typical inorganic and organic species. Due to its notable sensitivity, inexpensive cost, robust selectivity, excellent repeatability, and reuse ability, the electroanalytical possibilities of the Fe-MOF-modified GCE suggest that the device can be implemented into real-world applications in its primed condition.

A copper metal-organic framework-based electrochemical sensor for identification of glutathione in pharmaceutical samples.

The construction of a new electrochemical sensing platform based on a copper metal-organic framework (Cu-MOF) heterostructure is described in this paper. Drop-casting Cu-MOF suspension onto the electrode surface primed the sensor for glutathione detection. The composition and morphology of the Cu-MOF heterostructure were investigated using scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FT-IR), and UV-visible spectroscopy. The Cu-MOF heterostructure can identify glutathione (GSH) with an enhanced sensitivity of 0.0437 µA µM-1 at the detection limit (LOD; 0.1 ± 0.005 µM) and a large dynamic range of 0.1-20 µM. Boosting the conductivity and surface area enhances electron transport and promotes redox processes. The constructed sensors were also adequately selective against interference from other contaminants in a similar potential window. Furthermore, the Cu-MOF heterostructure has outstanding selectivity, long-term stability, and repeatability, and the given sensors have demonstrated their capacity to detect GSH with high accuracy (recovery range = 98.2-100.8%) in pharmaceutical samples.

Electrochemical detection of arsenic (III) hazardous chemicals using cubic CsPbBr3 single crystals: Structural insights from DFT study.

Long-term exposure to the highly toxic heavy metal arsenic can harm ecological systems and pose serious health risks to humans. Arsenic pollutant in water and the food chain must be addressed, and active prompt detection of As(III) is essential. The development of an effective detection method for As(III) ions is urgently needed to slow the alarming growth of arsenic pollution in the environment and safeguard the well-being of future generations. This study presents the results of our exhaustive investigation into cubic CsPbBr3 single crystals, the glassy carbon (GC) electrode modification with CsPbBr3 single crystals prepared by direct solvent evaporation, as well as our observations of the material's remarkable electrocatalytic properties and exceptional anti-interference sensing of As(III) ions in neutral pH media. The developed CsPbBr3/GC is exceptionally useful for the ultra-sensitive and specific identification of arsenic in water, exhibiting a detection limit of 0.381 µmol/L, a rapid response across a defined range of 0.1-25 µmol/L, and an ultra-sensitivity of 0.296 µA/µmolL-1. CsPbBr3/GCE (prepared without a specific reagent) is superior to other modified electrodes used as sensors in electrocatalytic activity, detection limit, analytical sensitivity, and stability response.

A nanosecond pulsed laser-ablated MWCNT-Au heterostructure: an innovative ultra-sensitive electrochemical sensing prototype for the identification of glutathione.

Here, a scheme that aptly describes the reduction of gold nanoparticles' crystalline size on the surface of MWCNTs in an aqueous phase to generate a LAMWCNT-Au heterostructure, employing an Nd:YAG laser (energy = 505 mJ and λ = 1064 nm) is developed. Such a LAMWCNT-Au heterostructure results in the development of an easy electrochemical procedure based on voltammetry analysis for ultra-sensitive glutathione sensing. High-resolution transmission electron microscopy, UV-visible spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy were used to examine the composition and morphology of laser-ablated adhesion of AuNPs over the MWCNT heterostructure. With a wide dynamic range of 0.1-9 µmol L-1, the LAMWCNT-Au heterostructure can detect glutathione with a high sensitivity of 0.1186 µA (µmol L-1)-1 at the low limit of detection (LLOD; 0.93 µmol L-1). It improves electron transfer and promotes redox reactions by increasing the conductivity and surface area. The findings show that the fabricated LAMWCNT-Au/GCE is an effortless and potent biosensing prototype for the identification of glutathione (GSH) at a negative potential in a neutral medium. The substantial synergistic surface impact produced by the introduction of AuNPs over MWCNTs exhibits exceptional electrocatalytic activity in comparison with individual MWCNT and AuNP. Moreover, the LAMWCNT-Au heterostructure has excellent selectivity, long-term stability, and reproducibility, and it can easily separate target molecules that were identified using various voltammetric analyses.

Ultrasound-aided synthesis of gold-loaded boron-doped graphene quantum dots interface towards simultaneous electrochemical determination of guanine and adenine biomolecules.

To acquire substantial electrochemical signals of guanine-GUA and adenine-ADE present in deoxyribonucleic acid-DNA, it is critical to investigate innovative electrode materials and their interfaces. In this study, gold-loaded boron-doped graphene quantum dots (Au@B-GQDs) interface was prepared via ultrasound-aided reduction method for monitoring GUA and ADE electrochemically. Transmission electron microscopy-TEM, Ultraviolet-Visible spectroscopy-UV-Vis, Raman spectroscopy, X-ray photoelectron spectroscopy-XPS, cyclic voltammetry-CV, and differential pulse voltammetry-DPV were used to examine the microstructure of the fabricated interfaceand demonstrate its electrochemical characteristics. The sensor was constructed by depositing the as-prepared Au@B-GQDs as a thin layer on a glassy carbon-GC electrode by the drop-casting method and carried out the electrochemical studies. The resulting sensor exhibited a good response with a wide linear range (GUA = 0.5-20 µM, ADE = 0.1-20 µM), a low detection limit-LOD (GUA = 1.71 µM, ADE = 1.84 µM), excellent sensitivity (GUA = 0.0820 µAµM-1, ADE = 0.1561 µAµM-1) and selectivity with common interferents results from biological matrixes. Furthermore, it seems to have prominentselectivity, reproducibility, repeatability, and long-lastingstability. The results demonstrate that the fabricated Au@B-GQDs/GC electrode is a simple and effective sensing platform for detecting GUA and ADE in neutral media at low potential as it exhibited prominent synergistic impact and outstanding electrocatalytic activity corresponding to individual AuNPs and B-GQDs modified electrodes.

Highly sensitive and selective detection of glutathione using ultrasonic aided synthesis of graphene quantum dots embedded over amine-functionalized silica nanoparticles.

Glutathione (GSH) is the most abundant antioxidant in the majority of cells and tissues; and its use as a biomarker has been known for decades. In this study, a facile electrochemical method was developed for glutathione sensing using voltammetry and amperometry analyses. In this study, a novel glassy carbon electrode composed of graphene quantum dots (GQDs) embedded on amine-functionalized silica nanoparticles (SiNPs) was synthesized. GQDs embedded on amine-functionalized SiNPs were physical-chemically characterized by different techniques that included high resolution-transmission electron microscopy (HR-TEM), X-ray diffraction spectroscopy (XRD), UV-visible spectroscopy, Fourier-transform infrared spectroscopy(FTIR), and Raman spectroscopy. The newly developed electrode exhibits a good response to glutathione with a wide linear range (0.5-7 µM) and a low detection limit (0.5 µM) with high sensitivity(2.64 µA µM-1). The fabricated GQDs-SiNPs/GC electrode shows highly attractive electrocatalytic activity towards glutathione detection in the neutral media at low potential due to a synergistic surface effect caused by the incorporation of GQDs over SiNPs. It leads to higher surface area and conductivity, improving electron transfer and promoting redox reactions. Besides, it provides outstanding selectivity, reproducibility, long-term stability, and can be used in the presence of interferences typically found in real sample analysis.