Feline sarcoptic mange in Poland: A case series of three cats.

BACKGROUND: Sarcoptic mange is rare in cats. The main symptoms reported in cases of feline sarcoptic mange include crusty lesions and pruritus, although these may vary in severity among individuals. OBJECTIVES: This report describes three cats infested with Sarcoptes scabiei, all presenting with pruritus and excoriation. METHODS: The diagnosis was confirmed by microscopic observation of skin scrape samples. RESULTS: All three cats were treated successfully using moxidectin and imidacloprid, selamectin and ivermectin, respectively. CONCLUSIONS: The clinical presentation of feline scabies appears to be more variable in cats than in dogs. Infestation with S. scabiei should be considered a differential diagnosis for cats presenting with pruritic inflammatory skin disease.

Effectiveness of the production of tissue-engineered living bone graft: a comparative study using perfusion and rotating bioreactor systems.

Bioreactor systems are very precious tools to generate living bone grafts in vitro. The aim of this study was to compare the effectiveness of rotating and perfusion bioreactor in the production of a living bone construct. Human bone marrow-derived mesenchymal stem cells (BMDSCs) were seeded on the surfaces of hydroxyapatite-based scaffolds and cultured for 21 days in three different conditions: (1) static 3D culture, (2) 3D culture in a perfusion bioreactor, and (3) dynamic 3D culture in a rotating bioreactor. Quantitative evaluation of cell number showed that cultivation in the perfusion bioreactor significantly reduced cell proliferation compared to the rotating bioreactor and static culture. Osteogenic differentiation test demonstrated that BMDSCs cultured in the rotating bioreactor produced significantly greater amount of osteopontin compared to the cells cultured in the perfusion bioreactor. Moreover, Raman spectroscopy showed that cultivation of BMDSCs in the rotating bioreactor enhanced extracellular matrix (ECM) mineralization that was characterized by B-type carbonated substitution of hydroxyapatite (associated with PO43- groups) and higher mineral-to-matrix ratio compared to the ECM of cells cultured in the perfusion system. Thus, it was concluded that the rotating bioreactor was much more effective than the perfusion one in the generation of bone tissue construct in vitro.

Characteristics of Hybrid Bioglass-Chitosan Coatings on the Plasma Activated PEEK Polymer.

Polyetheretherketone (PEEK) is a biocompatible, chemically and physically stable radiolucent polymer that exhibits a similar elastic modulus to the normal human bone, making it an attractive orthopedic implant material. However, PEEK is biologically inert, preventing strong enough bonding with the surrounding bone tissue when implanted in vivo. Surface modification and composite preparation are the two main strategies for the improvement of the bioactivity of PEEK. In this study, the plasma activated PEEK surfaces with the embedded bioglass, chitosan, and bioglass-chitosan mixed layers applying from the solution dip-coating technique were investigated. The most prominent factors affecting the coating biocompatibility are strictly connected with the composition of its outer surface (its charge and functional groups), hydrophilic-hydrophobic character, wettability and surface free energy, and topography (size of pores/substructures, roughness, stiffness), as well as the personal characteristics of the patient. The obtained surfaces were examined in terms of wettability and surface-free energy changes. Additionally, FTIR (Fourier Transformation Infrared Spectrometry) and SIMS (Secondary Ion Mass Spectrometry) were applied to establish and control the coating composition. Simultaneously the structure of coatings was visualized with the aid of SEM (Scanning Electron Microscopy). Finally, the obtained systems were incubated in SBF (Simulated Body Fluid) to verify the modifications' influence on the bioactivity/biocompatibility of the PEEK surface. Different structures with variable compositions, as well as changes of the wettability, were observed depending on the applied modification. In addition, the incubation in SBF suggested that the bioglass-chitosan ratio influenced the formation of apatite-like structures on the modified PEEK surfaces.

Application of Vibrational Spectroscopic Techniques in the Study of the Natural Polysaccharides and Their Cross-Linking Process.

Polysaccharides are one of the most abundant natural polymers and their molecular structure influences many crucial characteristics-inter alia hydrophobicity, mechanical, and physicochemical properties. Vibrational spectroscopic techniques, such as infrared (IR) and Raman spectroscopies are excellent tools to study their arrangement during polymerization and cross-linking processes. This review paper summarizes the application of the above-mentioned analytical methods to track the structure of natural polysaccharides, such as cellulose, hemicellulose, glucan, starch, chitosan, dextran, and their derivatives, which affects their industrial and medical use.

Developing Benign Ni/g-C3N4 Catalysts for CO2 Hydrogenation: Activity and Toxicity Study.

This research discusses the CO2 valorization via hydrogenation over the non-noble metal clusters of Ni and Cu supported on graphitic carbon nitride (g-C3N4). The Ni and Cu catalysts were characterized by conventional techniques including XRD, AFM, ATR, Raman imaging, and TPR and were tested via the hydrogenation of CO2 at 1 bar. The transition-metal-based catalyst designed with atom-economy principles presents stable activity and good conversions for the studied processes. At 1 bar, the rise in operating temperature during CO2 hydrogenation increases the CO2 conversion and the selectivity for CO and decreases the selectivity for methanol on Cu/CN catalysts. For the Ni/CN catalyst, the selectivity to light hydrocarbons, such as CH4, also increased with rising temperature. At 623 K, the conversion attained ca. 20%, with CH4 being the primary product of the reaction (CH4 yield >80%). Above 700 K, the Ni/CN activity increases, reaching almost equilibrium values, although the Ni loading in Ni/CN is lower by more than 90% compared to the reference NiREF catalyst. The presented data offer a better understanding of the effect of the transition metals' small metal cluster and their coordination and stabilization within g-C3N4, contributing to the rational hybrid catalyst design with a less-toxic impact on the environment and health. Bare g-C3N4 is shown as a good support candidate for atom-economy-designed catalysts for hydrogenation application. In addition, cytotoxicity to the keratinocyte human HaCaT cell line revealed that low concentrations of catalysts particles (to 6.25 µg mL-1) did not cause degenerative changes.

Osteoclast-mediated acidic hydrolysis of thermally gelled curdlan component of the bone scaffolds: Is it possible?

Many biomaterials for bone regeneration have recently been produced using thermally gelled curdlan (1,3-ß-d-glucan) as a binder for bioceramics. As the human organism does not produce enzymes having the ability to degrade curdlan, it is not clear what is the fate of curdlan gel after its implantation in the bone. To clarify this point, in this research osteoclasts were cultured on the curdlan gel to show its degradation by acidic hydrolysis. The studies clearly demonstrated microstructural (AFM and SEM imaging) and chemical changes (Raman spectroscopy) on the curdlan surface caused by osteoclast culture. Moreover, degradation test in a cell-free system using HCl solution (pH = 4.5), mimicking environment in the resorption lacuna, showed great weight loss of the sample, release of glucose, and chemical changes typical of curdlan degradation. Thus, the presented research for the first time provides a strong evidence of osteoclast-mediated acidic hydrolysis of thermally obtained curdlan gel.

Surface Chemical and Morphological Analysis of Chitosan/1,3-ß-d-Glucan Polysaccharide Films Cross-Linked at 90 °C.

The cross-linking temperature of polymers may affect the surface characteristics and molecular arrangement, which are responsible for their mechanical and physico-chemical properties. The aim of this research was to determine and explain in detail the mechanism of unit interlinkage of two-component chitosan/1,3-ß-d-glucan matrices gelled at 90 °C. This required identifying functional groups interacting with each other and assessing surface topography providing material chemical composition. For this purpose, various spectroscopic and microscopic approaches, such as attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), were applied. The results indicate the involvement mainly of the C-C and C-H groups and C=O⋯HN moieties in the process of biomaterial polymerization. Strong chemical interactions and ionocovalent bonds between the N-glucosamine moieties of chitosan and 1,3-ß-d-glucan units were demonstrated, which was also reflected in the uniform surface of the sample without segregation. These unique properties, hybrid character and proper cell response may imply the potential application of studied biomaterial as biocompatible scaffolds used in regenerative medicine, especially in bone restoration and/or wound healing.

Cardiac Resynchronization Therapy Remote Monitoring - COVID-19 Pandemic Experiences and Future Perspectives.

Cardiac resynchronization therapy (CRT) is a well-established form of the treatment for heart failure (HF) in patients with left ventricle contraction dyssynchrony. Apart from typical in-office management, remote monitoring enables constant surveillance on both the patient's and the device's condition. This way, in case of any problems, clinical decisions could be made earlier leading to better outcome of CRT patients. COVID-19 pandemic with following lockdowns in many countries resulted in getting more attention on remote monitoring systems. The aim of this paper was to gather and summarize worldwide experiences from CRT remote monitoring during COVID-19 pandemic and point out future possibilities for HF patients treated with CRT. Already published experiences from remote monitoring of CRT devices during COVID-19 restrictions confirmed previous advantages of telemedical approach, however, more publications in this area would be helpful.

Non-thymoma-associated exfoliative dermatitis in a European shorthair cat: A case report.

The current case report presents a case of non-thymoma-associated exfoliative dermatitis in an 8-year-old European Shorthair female cat. The animal displayed extensive alopecia and excessive peeling of the epidermis. There were no other apparent disorders, except for the skin lesions. Roentgenographic and sonographic examinations, complete blood count and blood serum chemistry analyses, and skin biopsy were performed. The histopathological investigation revealed hyperkeratosis of the epidermis and the infiltration of lymphocytes and macrophages at the dermal-epidermal junction around the hair follicles and sebaceous glands. Moreover, edema of the basal layer and melanin migration from the epidermis to the dermis were observed. The patient underwent treatment with immunosuppressive doses of prednisolone, antibiotic therapy, and baths in anti-seborrheic shampoos and displayed resolution. However, recurrence was observed after one month. Consequently, the patient received cyclosporine A, in addition to the aforementioned treatment and the lesions resolved without relapse.

Molecular Structure of Cefuroxime Axetil Complexes with α-, ß-, γ-, and 2-Hydroxypropyl-ß-Cyclodextrins: Molecular Simulations and Raman Spectroscopic and Imaging Studies.

The formation of cefuroxime axetil+cyclodextrin (CA+CD) complexes increases the aqueous solubility of CA, improves its physico-chemical properties, and facilitates a biomembrane-mediated drug delivery process. In CD-based tablet formulations, it is crucial to investigate the molecular details of complexes in final pharmaceutical preparation. In this study, Raman spectroscopy and mapping were applied for the detection and identification of chemical groups involved in α-, ß-, γ-, and 2-hydroxypropyl-ß-CD (2-HP- ß-CD)+CA complexation process. The experimental studies have been complemented by molecular dynamics-based investigations, providing additional molecular details of CA+CD interactions. It has been demonstrated that CA forms the guest-host type inclusion complexes with all studied CDs; however, the nature of the interactions is slightly different. It seems that both α- and ß-CD interact with furanyl and methoxy moieties of CA, γ-CD forms a more diverse pattern of interactions with CA, which are not observed in other CDs, whereas 2HP-ß-CD binds CA with the contribution of hydrogen bonding. Apart from supporting this interpretation of the experimental data, molecular dynamics simulations allowed for ordering the CA+CD binding affinities. The obtained results proved that the molecular details of the host-guest complexation can be successfully predicted from the combination of Raman spectroscopy and molecular modeling.

Vibrational Spectroscopic Analyses and Imaging of the Early Middle Ages Hemp Bast Fibres Recovered from Lake Sediments.

Fourier Transform Infrared (FT-IR) spectroscopy and imaging combined with hierarchical cluster analysis (HCA) was applied to analyse biochemical properties of Early Middle Ages hemp (Cannabis sativa L.) bast fibres collected from lake bottom sediment of lake Slone. The examined plant macrofossil material constitutes residues of the hemp retting process that took place in the 7th-8th century. By comparison of three samples: untreated isolated bast fibres, and fibres incubated overnight at 4 and 37 °C, we were able to mimic the retting conditions. Using FT-IR qualitative and semi-quantitative assessment of the primary polysaccharides content, total protein content, and their spatial distribution was performed within the hemp fibres. The concentration of cellulose remained vastly unchanged, while the concentration of lignin and pectin was the highest in the untreated sample. The spatial distributions of compounds were heterogeneous in the untreated and 4 °C-incubated samples, and homogenous in the specimen processed at 37 °C. Interestingly, a higher amide content was detected in the latter sample indicating the highest degree of enzymatic degradation. In this study, we show that the spectroscopic methods allow for a non-destructive evaluation of biochemical composition of plant fibres without preparation, which can be an appropriate approach for studying ancient plant remains.

Pilot Videodermoscopic Examination of Hair and Skin in Arabian Mare Horses During the Winter Season.

Videodermoscopy is a novel, noninvasive technique used to examine the appearance of skin and its adnexa. The aim of this study was to assess specific dermoscopic parameters in Arabian purebred mares in particular areas of the body during the winter season. The study was performed in the winter season. Videodermoscopic evaluations of the hair and skin were performed over seven areas of the body: the forehead, mane, neck, chest, flank, croup, and tail. Twenty-one healthy, non-breeding Arabian mares aged 3 to 21 years were selected for the study. The Video-Dermatoscope Vidix 7 (Medici Medical SRL) equipped with a 5-Mpx camera, and the VX1 cover (contact type cap 3.5 cm) was used. The CellSens Dimension was used to perform the above-mentioned measurements. Videodermoscopy revealed marked pigmentary differences in the hair of gray Arabian mares with blood vessels visible on unpigmented skin. The density of the hair in one dermoscopy field of view ranged from 1,458 (croup) to 3,680 (head) hairs and the thickness of hair ranged from 52.70 (chest) to 87.45 µm (tail). Uniform group of horses consisting of one sex, one breed, and one season. When compared to previous studies, our findings demonstrated that the density and thickness of hair are contingent upon a horse's breed and body region.

Physicochemical changes of the chitosan/ß-1,3-glucan/hydroxyapatite biocomposite caused by mesenchymal stem cells cultured on its surface in vitro.

In the present study structural characteristics and physicochemical properties of tri-component biomaterial (consisting of chitosan, ß-1,3-glucan and hydroxyapatite) seeded with mesenchymal stem cells were investigated with the use of diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). In this study we use non-conventional approach of DRIFT spectroscopy for investigating biomaterial changes under simulated physiological conditions. Particular cell-induced changes were intended to be properly evaluated with analytical methods. Abovementioned techniques allowed to precisely assess the changes on the surface of the biomaterial caused by two kinds of stem cells (ADSCs - Adipose tissue-Derived Stem Cells and BMDSCs - Bone Marrow-Derived Stem Cells) cultured directly on the surface of bioceramic-based biomaterial. The bioactivity and biocompatibility of designed bone biomaterial were demonstrated and hence it seems to be a promising scaffold used in tissue engineering. Designed chitosan, ß-1,3-glucan, and hydroxyapatite biomaterial was proven to be non-toxic, surgically handy with cellular compatibility. The obtained results are interesting and promising in terms of spectroscopic methods suitability for qualitative assessment of material-cell interactions.

Application of Raman Spectroscopic Imaging to Assess the Structural Changes at Cell-Scaffold Interface.

Raman spectroscopic imaging and mapping were applied to characterise three-compound ceramic composite biomaterial consisting of chitosan, ß-1,3-d-glucan (curdlan) and hydroxyapatite (HA) developed as a bone tissue engineering product (TEP). In this rapidly advancing domain of medical science, the urge for quick, reliable and specific method for products evaluation and tissue-implant interaction, in this case bone formation process, is constantly present. Two types of stem cells, adipose-derived stem cells (ADSCs) and bone marrow-derived stem cells (BMDSCs), were cultured on composite surface. Raman spectroscopic imaging provided advantageous information on molecular differences and spatial distribution of compounds within and between the cell-seeded and untreated samples at a microscopic level. With the use of this, it was possible to confirm composite biocompatibility and bioactivity in vitro. Deposition of HA and changes in its crystallinity along with protein adsorption proved new bone tissue formation in both mesenchymal stem cell samples, where the cells proliferated, differentiated and produced biomineralised extracellular matrix (ECM). The usefulness of spectroscopic Raman imaging was confirmed in tissue engineering in terms of both the organic and inorganic components considering composite-cells interaction.

Collagen maturity and mineralization in mesenchymal stem cells cultured on the hydroxyapatite-based bone scaffold analyzed by ATR-FTIR spectroscopic imaging.

Modern bone tissue engineering is based on the use of implants in the form of biomaterials, which are used as scaffolds for osteoprogenitor or stem cells. The task of the scaffolds is to temporarily sustain the function, proliferation and differentiation of bone tissue to enable its regeneration. The aim of this work is to use the macro ATR-FTIR spectroscopic imaging for analysis of the ceramic-based biomaterial (chitosan/ß-1,3-glucan/hydroxyapatite). Specifically, during long-term culture of mesenchymal cells derived from adipose tissue (ADSCs) and bone marrow (BMDSCs) on the surface of scaffold. Infrared spectroscopy allows the acquisition of information on both the organic and inorganic parts of the tested composite. This innovative spectroscopic approach proved to be very suitable for studying the formation of new bone tissue and ECM components, sample staining and demineralization are not required and consequently the approach is rapid and cost-effective. The novelty of this study focuses on the innovatory use of ATR-FTIR imaging to evaluate the molecular structure and maturity of collagen as well as mineral matrix formation and crystallization in the context of bone regenerative medicine. Our research has shown that the biomaterial investigated on this work facilitates the formation of valid bone ECM of the stem cells types studied, as a result of the synthesis of type I collagen and mineral content deposition. Nevertheless, ADSC cells have been proven to produce a greater amount of collagen with a lower content of helical secondary structures, at the same time showing a higher mineralization intensity compared to BMDSC cells. Considering the above results, it could be stated that the developed scaffold is a promising material for biomedical applications, including modification of bone implants to increase their biocompatibility.

Effect of Gelation Temperature on the Molecular Structure and Physicochemical Properties of the Curdlan Matrix: Spectroscopic and Microscopic Analyses.

In order to determine the effect of different gelation temperatures (80 °C and 90 °C) on the structural arrangements in 1,3-ß-d-glucan (curdlan) matrices, spectroscopic and microscopic approaches were chosen. Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) and Raman spectroscopy are well-established techniques that enable the identification of functional groups in organic molecules based on their vibration modes. X-ray photoelectron spectroscopy (XPS) is a quantitative analytical method utilized in the surface study, which provided information about the elemental and chemical composition with high surface sensitivity. Contact angle goniometer was applied to evaluate surface wettability and surface free energy of the matrices. In turn, the surface topography characterization was obtained with the use of atomic force microscopy (AFM) and scanning electron microscopy (SEM). Described techniques may facilitate the optimization, modification, and design of manufacturing processes (such as the temperature of gelation in the case of the studied 1,3-ß-d-glucan) of the organic polysaccharide matrices so as to obtain biomaterials with desired characteristics and wide range of biomedical applications, e.g., entrapment of drugs or production of biomaterials for tissue regeneration. This study shows that the 1,3-ß-d-glucan polymer sample gelled at 80 °C has a distinctly different structure than the matrix gelled at 90 °C.

Spectroscopic studies on the temperature-dependent molecular arrangements in hybrid chitosan/1,3-ß-D-glucan polymeric matrices.

Chitosan/1,3-ß-D-glucan matrices have been recently used in various biomedical applications. Within this study, the structural changes in hybrid polysaccharide chitosan/1,3-ß-D-glucan matrices cross-linked at 70 °C and 80 °C were detected with Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR FT-IR) and Raman spectroscopy enabled thorough insights into molecular structure of studied biomaterials, whereas X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) provided their surface characteristics with confirmation of their effective and non-destructive properties. There are temperature-dependent differences in the chemical interactions between 1,3-ß-D-glucan units and N-glucosamine in chitosan, resulting in surface polarity changes. The second order derivatives and deconvolution revealed the alterations in the secondary structure of studied matrices, along with different sized grain-like structures revealed by AFM. Since surface physicochemical properties of biomaterials have great impact on cell behavior, abovementioned techniques may allow to optimize and modify the preparation of polymeric matrices with desired features.

Pituitary-testicular Axis Dysfunction in Methimazole-induced Hypothyroidism in Rats.

INTRODUCTION: Thyroid hormones play a major role in the regulation of testicular maturation and growth and in the control of Sertoli and Leydig cell functions in adulthood. When naturally occurring, hypothyroidism causes male hypogonadotropic hypogonadism and Sertoli cell function disorders, but when iatrogenic and methimazole-induced its influence on the pituitary-testicular axis function with respect to Sertoli cells is poorly known. MATERIAL AND METHODS: Male adult Wistar rats (n = 14) were divided into two groups: E - taking methimazole orally for 60 days, and C - control animals. After 60 d, the concentrations in serum of testosterone, follicle-stimulating and luteinising hormones, and inhibins A and B were measured. Testicles were examined morphologically: the apoptotic Sertoli cell percentage (ASC%) and number of these cells functional per tubular mm2 (FSCN/Tmm2) were calculated. RESULTS: In group E, inhibin A was higher while inhibin B was lower than in group C. ASC% was higher and FSCN/Tmm2 lower in group E than in group C. CONCLUSION: A specific modulation of Sertoli cell function in the course of methimazole-induced hypothyroidism leads to a simultaneous concentration increase in inhibin A and decrease in B. Inhibin A might share responsibility for pituitary-testicular axis dysfunction and hypogonadotropic hypogonadism in this model of hypothyroidism.

Elastographic and Morphological Testicular Changes in Hypothyroidism - An Experimental Study.

INTRODUCTION: Methimazole-induced hypothyroidism is a clinical problem in the treatment of hyperthyroidism in people and animals and is an example of metabolic disease that can lead to fertility disorders and can give elastographic testicular changes. MATERIAL AND METHODS: Ultrasound elastography using the Esaote MyLab Twice ultrasound system and a morphological examination of testes were performed in seven methimazole-administered (group E) and seven healthy rats (group C). RESULTS: The elasticity ratio of strains in the scrotal wall of the near-field test area to testicular tissue (ELX-T-RAT) and hardness percentage of strained tissues in the defined area of a testicle (ELX-T%HRD) in group E were statistically significantly lower than in group C. The degree of spermatogenesis was statistically significantly higher in group E than in group C and similarly seminiferous tubule diameters in group E were statistically significantly higher than in group C. Body weight and testicular weight in group E were statistically significantly lower than in group C. CONCLUSION: Changes in the elastographical parameters of testes may result from disorders secondary to hypothyroidism. The usefulness of elastography is noteworthy in the case of evaluation of testis function in patients with some metabolic disorders.