Mechanochemically Enabled Metastable Niobium Tungsten Oxides.

Metastable compounds have greatly expanded the synthesizable compositions of solid-state materials and have attracted enormous amounts of attention in recent years. Especially, mechanochemically enabled metastable materials synthesis has been very successful in realizing cation-disordered materials with highly simple crystal structures, such as rock salts. Application of the same strategy for other structural types, especially for non-close-packed structures, is peculiarly underexplored. Niobium tungsten oxides (NbWOs), a class of materials that have been under the spotlight because of their diverse structural varieties and promising electrochemical and thermoelectric properties, are ideally suited to fill such a knowledge gap. In this work, we develop a new series of metastable NbWOs and realize one with a fully cation-disordered structure. Furthermore, we find that metastable NbWOs transform to a cation-disordered cubic structure when applied as a Li-ion battery anode, highlighting an intriguing non-close-packed-close-packed conversion process, as evidenced in various physicochemical characterizations, in terms of diffraction, electronic, and vibrational structures. Finally, by comparing the cation-disordered NbWO with other trending cation-disordered oxides, we raise a few key structural features for cation disorder and suggest a few possible research opportunities for this field.

Sustainable Anionic Redox by Inhibiting Li Cross-Layer Migration in Na-Based Layered Oxide Cathodes.

The irrational utilization of an anionic electron often accompanies structural degradation with an irreversible cation migration process upon cycling in sodium-layered oxide cathodes. Moreover, the insufficient understanding of the anionic redox involved cation migration makes the design strategies of high energy density electrodes even less effective. Herein, a P3-Na0.67Li0.2Fe0.2Mn0.6O2 (P3-NLFM) cathode is proposed with the in-plane disordered Li distribution after an in-depth remolding of the Li ribbon-ordered P3-Na0.6Li0.2Mn0.8O2 (P3-NLM) layered oxide. The disordered Li sublattice in the transition metal slab of P3-NLFM leads to the dispersed |O2p orbitals, the lowered charge transfer gap, and the suppressed phase transition at high voltages. Then the enhanced Mn-O interaction and electronic stability are disclosed by the crystal orbital Hamilton population (COHP) analysis at high voltage in P3-NLFM. Furthermore, ab initio molecular dynamics (AIMD) simulation suggests the order/disorder of the transition metal layer is highly correlated with the stability of the Li sublattice. The cross-layer migration and loss of Li in P3-NLM are suppressed in P3-NLFM to enable the high reversibility upon cycling. As a result, the P3-NLFM delivers a high capacity of 163 mAh g-1 without oxygen release and an enhanced capacity retention of 81.9% (vs 42.9% in P3-NLM) after 200 cycles, which constitutes a promising approach for sustainable oxygen redox in rechargeable batteries.

Na2.5 Cr0.5 Zr0.5 Cl6 : A New Halide-Based Fast Sodium-Ion Conductor.

All-solid-state batteries employing solid electrolytes (SEs) have received widespread attention due to their high safety. Recently, lithium halides are intensively investigated as promising SEs while their sodium counterparts are less studied. Herein, a new sodium-ion conductor with a chemical formula of Na2.5 Cr0.5 Zr0.5 Cl6 is reported, which exhibits high room temperature ionic conductivity of 0.1 mS cm-1 with low migration energy barrier of ≈0.41 eV. Na2.5 Cr0.5 Zr0.5 Cl6 has a Fm-3m structure with 41.67 mol.% of cationic vacancies owing to the occupation of Cr (8.33 mol.%) and Zr (8.33 mol.%) ions at Na sites. Supercell calculations show that the lowest columbic energy configuration has Cr/Zr/V (where V is the vacancy) clusters in the structure. Nonetheless, the clusters have mixed effects on the sodium ion conduction pathway, based on the Bond Valence Energy Landscape calculation. A global 3D Na-ion transport percolation network can be revealed in the lowest energy supercell. Effective pathways are connected through the NaCl6 and VCl6 nodes. Besides, Raman spectroscopy and 23 Na solid-state nuclear magnetic resonance spectroscopy further prove the tunable structure of the SEs with different Cr to Zr ratios. The optimization between the concentration of Na+ and vacancies is crucial to create an improved network of Na+ diffusion channels.

Promoting high-voltage stability through local lattice distortion of halide solid electrolytes.

Stable solid electrolytes are essential to high-safety and high-energy-density lithium batteries, especially for applications with high-voltage cathodes. In such conditions, solid electrolytes may experience severe oxidation, decomposition, and deactivation during charging at high voltages, leading to inadequate cycling performance and even cell failure. Here, we address the high-voltage limitation of halide solid electrolytes by introducing local lattice distortion to confine the distribution of Cl-, which effectively curbs kinetics of their oxidation. The confinement is realized by substituting In with multiple elements in Li3InCl6 to give a high-entropy Li2.75Y0.16Er0.16Yb0.16In0.25Zr0.25Cl6. Meanwhile, the lattice distortion promotes longer Li-Cl bonds, facilitating favorable activation of Li+. Our results show that this high-entropy halide electrolyte boosts the cycle stability of all-solid-state battery by 250% improvement over 500 cycles. In particular, the cell provides a higher discharge capacity of 185 mAh g-1 by increasing the charge cut-off voltage to 4.6 V at a small current rate of 0.2 C, which is more challenging to electrolytes|cathode stability. These findings deepen our understanding of high-entropy materials, advancing their use in energy-related applications.

Novel Low-Strain Layered/Rocksalt Intergrown Cathode for High-Energy Li-Ion Batteries.

Both layered- and rocksalt-type Li-rich cathode materials are drawing great attention due to their enormous capacity, while the individual phases have their own drawbacks, such as great volume change for the layered phase and low electronic and ionic conductivities for the rocksalt phase. Previously, we have reported the layered/rocksalt intergrown cathodes with nearly zero-strain operation, while the use of precious elements hinders their industrial applications. Herein, low-cost 3d Mn4+ ions are utilized to partially replace the expensive Ru5+ ions, to develop novel ternary Li-rich cathode material Li1+x[RuMnNi]1-xO2. The as-designed Li1.15Ru0.25Mn0.2Ni0.4O2 is revealed to have a layered/rock salt intergrown structure by neutron diffraction and transmission electron microscopy. The as-designed cathode exhibits ultrahigh lithium-ion reversibility, with 0.86 (231.1 mAh g-1) out of a total Li+ inventory of 1.15 (309.1 mAh g-1). The X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectra further demonstrate that the high Li+ storage of the intergrown cathode is enabled by leveraging cationic and anionic redox activities in charge compensation. Surprisingly, in situ X-ray diffraction shows that the intergrown cathode undergoes extremely low-strain structural evolution during the charge-discharge process. Finally, the Mn content in the intergrown cathodes is found to be tunable, providing new insights into the design of advanced cathode materials for high-energy Li-ion batteries.

Over-Stoichiometric Metastabilization of Cation-Disordered Rock Salts.

Cation-disordered rock salts (DRXs) are well known for their potential to realize the goal of achieving scalable Ni- and Co-free high-energy-density Li-ion batteries. Unlike in most cathode materials, the disordered cation distribution may lead to more factors that control the electrochemistry of DRXs. An important variable that is not emphasized by research community is regarding whether a DRX exists in a more thermodynamically stable form or a more metastable form. Moreover, within the scope of metastable DRXs, over-stoichiometric DRXs, which allow relaxation of the site balance constraint of a rock salt structure, are particularly underexplored. In this work, these findings are reported in locating a generally applicable approach to "metastabilize" thermodynamically stable Mn-based DRXs to metastable ones by introducing Li over-stoichiometry. The over-stoichiometric metastabilization greatly stimulates more redox activities, enables better reversibility of Li deintercalation/intercalation, and changes the energy storage mechanism. The metastabilized DRXs can be transformed back to the thermodynamically stable form, which also reverts the electrochemical properties, further contrasting the two categories of DRXs. This work enriches the structural and compositional space of DRX families and adds new pathways for rationally tuning the properties of DRX cathodes.

Enhancing Ionic Transport and Structural Stability of Lithium-Rich Layered Oxide Cathodes via Local Structure Regulation.

Lithium-rich manganese-based layered oxides (LRM) have garnered considerable attention as cathode materials due to their superior performance. However, the inherent structural degradation and obstruction of ion transport during cycling lead to capacity and voltage decay, impeding their practical applications. Herein, an Sb-doped LRM material with local spinel phase is reported, which has good compatibility with the layered structure and provides 3D Li+ diffusion channels to accelerate Li+ transport. Additionally, the strong Sb-O bond enhances the stability of the layered structure. Differential electrochemical mass spectrometry indicates that highly electronegative Sb doping effectively suppresses the release of oxygen in the crystal structure and mitigates successive electrolyte decomposition, thereby reducing structural degradation of the material. As a result of this dual-functional design, the 0.5 Sb-doped material with local spinel phases exhibits favorable cycling stability, retaining 81.7% capacity after 300 cycles at 1C, and an average discharge voltage of 1.87 mV per cycle, which is far superior to untreated material with retention values of 28.8% and 3.43 mV, respectively. This study systematically introduces Sb doping and regulates local spinel phases to facilitate ion transport and alleviate structural degradation of LRM, thereby suppressing capacity and voltage fading, and improving the electrochemical performance of batteries.

A New Zinc Salt Chemistry for Aqueous Zinc-Metal Batteries.

Aqueous zinc-ion batteries (ZIBs) are promising energy storage solutions with low cost and superior safety, but they suffer from chemical and electrochemical degradations closely related to the electrolyte. Here, a new zinc salt design and a drop-in solution for long cycle-life aqueous ZIBs are reported. The salt Zn(BBI)2 with a rationally designed anion group, N-(benzenesulfonyl)benzenesulfonamide (BBI- ), has a special amphiphilic molecular structure, which combines the benefits of hydrophilic and hydrophobic groups to properly tune the solubility and interfacial condition. This new zinc salt does not contain fluorine and is synthesized via a high-yield and low-cost method. It is shown that 1 m Zn(BBI)2 aqueous electrolyte with a widened cathodic stability window effectively stabilizes Zn metal/H2 O interface, mitigates chemical and electrochemical degradations, and enables both symmetric and full cells using a zinc-metal electrode.

Lithiated Prussian blue analogues as positive electrode active materials for stable non-aqueous lithium-ion batteries.

Prussian blue analogues (PBAs) are appealing active materials for post-lithium electrochemical energy storage. However, PBAs are not generally suitable for non-aqueous Li-ion storage due to their instability upon prolonged cycling. Herein, we assess the feasibility of PBAs with various lithium content for non-aqueous Li-ion storage. We determine the crystal structure of the lithiated PBAs via neutron powder diffraction measurements and investigate the influence of water on structural stability and Li-ion migration through operando X-ray diffraction measurements and bond valence simulations. Furthermore, we demonstrate that a positive electrode containing Li2-xFeFe(CN)6⋅nH2O (0 ≤ x ≤ 2) active material coupled with a Li metal electrode and a LiPF6-containing organic-based electrolyte in coin cell configuration delivers an initial discharge capacity of 142 mAh g-1 at 19 mA g-1 and a discharge capacity retention of 80.7% after 1000 cycles at 1.9 A g-1. By replacing the lithium metal with a graphite-based negative electrode, we also report a coin cell capable of cycling for more than 370 cycles at 190 mA g-1 with a stable discharge capacity of about 105 mAh g-1 and a discharge capacity retention of 98% at 25 °C.

Slight compositional variation-induced structural disorder-to-order transition enables fast Na+ storage in layered transition metal oxides.

The omnipresent Na+/vacancy orderings change substantially with the composition that inevitably actuate the ionic diffusion in rechargeable batteries. Therefore, it may hold the key to the electrode design with high rate capability. Herein, the influence of Na+/vacancy ordering on Na+ mobility is demonstrated firstly through a comparative investigation in P2-Na2/3Ni1/3Mn2/3O2 and P2-Na2/3Ni0.3Mn0.7O2. The large zigzag Na+/vacancy intralayer ordering is found to accelerate Na+ migration in P2-type Na2/3Ni1/3Mn2/3O2. By theoretical simulations, it is revealed that the Na+ ordering enables the P2-type Na2/3Ni1/3Mn2/3O2 with higher diffusivities and lower activation energies of 200 meV with respect to the P3 one. The quantifying diffusional analysis further prove that the higher probability of the concerted Na+ ionic diffusion occurs in P2-type Na2/3Ni1/3Mn2/3O2 due to the appropriate ratio of high energy ordered Na ions (Naf) occupation. As a result, the interplay between the Na+/vacancy ordering and Na+ kinetic is well understood in P2-type layered cathodes.

Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways.

A critical challenge for next-generation lithium-based batteries lies in development of electrolytes that enable thermal safety along with the use of high-energy-density electrodes. We describe molecular ionic composite electrolytes based on an aligned liquid crystalline polymer combined with ionic liquids and concentrated Li salt. This high strength (200 MPa) and non-flammable solid electrolyte possesses outstanding Li+ conductivity (1 mS cm-1 at 25 °C) and electrochemical stability (5.6 V versus Li|Li+) while suppressing dendrite growth and exhibiting low interfacial resistance (32 Ω cm2) and overpotentials (≤120 mV at 1 mA cm-2) during Li symmetric cell cycling. A heterogeneous salt doping process modifies a locally ordered polymer-ion assembly to incorporate an inter-grain network filled with defective LiFSI and LiBF4 nanocrystals, strongly enhancing Li+ conduction. This modular material fabrication platform shows promise for safe and high-energy-density energy storage and conversion applications, incorporating the fast transport of ceramic-like conductors with the superior flexibility of polymer electrolytes.

Layered-rocksalt intergrown cathode for high-capacity zero-strain battery operation.

The dependence on lithium-ion batteries leads to a pressing demand for advanced cathode materials. We demonstrate a new concept of layered-rocksalt intergrown structure that harnesses the combined figures of merit from each phase, including high capacity of layered and rocksalt phases, good kinetics of layered oxide and structural advantage of rocksalt. Based on this concept, lithium nickel ruthenium oxide of a main layered structure (R[Formula: see text]m) with intergrown rocksalt (Fm[Formula: see text]m) is developed, which delivers a high capacity with good rate performance. The interwoven rocksalt structure successfully prevents the anisotropic structural change that is typical for layered oxide, enabling a nearly zero-strain operation upon high-capacity cycling. Furthermore, a design principle is successfully extrapolated and experimentally verified in a series of compositions. Here, we show the success of such layered-rocksalt intergrown structure exemplifies a new battery electrode design concept and opens up a vast space of compositions to develop high-performance intergrown cathode materials.

Structural and Electrochemical Impacts of Mg/Mn Dual Dopants on the LiNiO2 Cathode in Li-Metal Batteries.

Doping chemistry has been regarded as an efficient strategy to overcome some fundamental challenges facing the "no-cobalt" LiNiO2 cathode materials. By utilizing the doping chemistry, we evaluate the battery performance and structural/chemical reversibility of a new no-cobalt cathode material (Mg/Mn-LiNiO2). The unique dual dopants drive Mg and Mn to occupy the Li site and Ni site, respectively. The Mg/Mn-LiNiO2 cathode delivers smooth voltage profiles, enhanced structural stability, elevated self-discharge resistance, and inhibited nickel dissolution. As a result, the Mg/Mn-LiNiO2 cathode enables improved cycling stability in lithium metal batteries with the conventional carbonate electrolyte: 80% capacity retention after 350 cycles at C/3, and 67% capacity retention after 500 cycles at 2C (22 °C). We then take the Mg/Mn-LiNiO2 as the platform to investigate the local structural and chemical reversibility, where we identify that the irreversibility takes place starting from the very first cycle. The highly reactive surface induces the surface oxygen loss, metal reduction reaching the subsurface, and metal dissolution. Our data demonstrate that the dual dopants can, to some degree, mitigate the irreversibility and improve the cycling stability of LiNiO2, but more efforts are needed to eliminate the key challenges of these materials for battery operation in the conventional carbonate electrolyte.

Distinct Surface and Bulk Thermal Behaviors of LiNi0.6Mn0.2Co0.2O2 Cathode Materials as a Function of State of Charge.

Understanding how structural and chemical transformations take place in particles under thermal conditions can inform designing thermally robust electrode materials. Such a study necessitates the use of diagnostic techniques that are capable of probing the transformations at multiple length scales and at different states of charge (SOC). In this study, the thermal behavior of LiNi0.6Mn0.2Co0.2O2 (NMC-622) was examined as a function of SOC, using an array of bulk and surface-sensitive techniques. In general, thermal stability decreases as lithium content is lowered and conversion in the bulk to progressively reduced metal oxides (spinels, rock salt) occurs as the temperature is raised. Hard X-ray absorption spectroscopy (XAS) and X-ray Raman spectroscopy (XRS) experiments, which probe the bulk, reveal that Ni and Co are eventually reduced when partially delithiated samples (regardless of the SOC) are heated, although Mn is not. Surface-sensitive synchrotron techniques, such as soft XAS and transmission X-ray microscopy (TXM), however, reveal that for 50% delithiated samples, apparent oxidation of nickel occurs at particle surfaces under some circumstances. This is partially compensated by reduction of cobalt but may also be a consequence of redistribution of lithium ions upon heating. TXM results indicate the movement of reduced nickel ions into particle interiors or oxidized nickel ions to the surface or both. These experiments illustrate the complexity of the thermal behavior of NMC cathode materials. The study also informs the importance of investigating the surface and bulk difference as a function of SOC when studying the thermal behaviors of battery materials.

Inducing Favorable Cation Antisite by Doping Halogen in Ni-Rich Layered Cathode with Ultrahigh Stability.

The cation antisite is the most recognizable intrinsic defect type in nickel-rich layered and olivine-type cathode materials for lithium-ion batteries, and important for electrochemical/thermal performance. While how to generate the favorable antisite has not been put forward, herein, by combining first-principles calculation with neutron powder diffraction (NPD) study, a defect inducing the favorable antisite mechanism is proposed to improve cathode stability, that is, halogen substitution facilitates the neighboring Li and Ni atoms to exchange their sites, forming a more stable local octahedron of halide (LOSH). According to the mechanism, it is demonstrated by NPD that F-doping not only induces the antisite formation in layered LiNi0.85Co0.075Mn0.075O2 (LNCM), but also increases the antisite concentration linearly. F substitution (1%) induces 5.7% antisite, and it displays an excellent capacity retention of 94% at 1 C for 200 cycles under 25 °C, outstanding high temperature cyclability (153.4 mAh·g-1 at 1 C for 120 cycles under 55 °C). The onset decomposition temperature increases by 48 °C. The ultrahigh cycling/thermal stability is attributed to the stronger LOSH, and it keeps the structural integrity after long cycling and develops an electrostatic repulsion force between oxygen layers to increase the lattice parameter c, which benefits Li-ion migration.

Electrical Properties of Hollandite-Type Ba1.33Ga2.67Ti5.33O16, K1.33Ga1.33Ti6.67O16, and K1.54Mg0.77Ti7.23O16.

Electrical conductivity and electrochemical catalytic activity for H2 oxidation of Ti-based hollandite-type Ba1.33Ga2.67Ti5.33O16 (BGT), K1.33Ga1.33Ti6.67O16 (KGT), and K1.54Mg0.77Ti7.23O16 (KMT) were investigated, along with the chemical stability of KMT under H2 at elevated temperature. BGT, KGT, and KMT crystallized in a tetragonal structure with the space-group I4/ m. The electrical conductivity in H2 increases with increasing Ti content, and the highest total electrical conductivity of 2 S/cm at 800 °C in H2 was observed for KMT. KGT:Fe (1:1) + 20% LSGM + 30% porosity composite electrode showed the lowest area specific resistance of ca. 1.6 Ω cm2 at 800 °C for hydrogen oxidation reaction (HOR) under the open circuit condition. Moderate catalytic activity for HOR could be attributed to poor oxide ion conductivity and exclusion of potassium and hydrogen uptake in H2 at elevated temperature. Bond valence sum mismatch map calculation showed that the ionic transport happens along the 1D channel of c-axis in the hollandite oxides.

Delithiation/lithiation behaviors of three polymorphs of LiVOPO4.

LiVOPO4 is an attractive high-voltage cathode with rich polymorphs (α, ß and αI). We present here a comparison of the behaviors of three LiVOPO4 polymorphs during delithiation/lithiation. Experimental and computational work suggests that α-LiVOPO4 suffers from more severe conductivity problems among the three forms. For the first time, our preliminary studies on lithiated ß-Li2VOPO4 demonstrate that the orthorhombic structure of ß-LiVOPO4 could be retained after lithiation, which is consistent with the finding for the other two forms.

Alleviating oxygen evolution from Li-excess oxide materials through theory-guided surface protection.

Li-excess cathodes comprise one of the most promising avenues for increasing the energy density of current Li-ion technology. However, the first-cycle surface oxygen release in these materials causes cation densification and structural reconstruction of the surface region, leading to encumbered ionic transport and increased impedance. In this work, we use the first principles Density Functional Theory to systematically screen for optimal cation dopants to improve oxygen-retention at the surface. The initial dopant set includes all transition metal, post-transition metal, and metalloid elements. Our screening identifies Os, Sb, Ru, Ir, or Ta as high-ranking dopants considering the combined criteria, and rationalization based on the electronic structure of the top candidates are presented. To validate the theoretical screening, a Ta-doped Li1.3Nb0.3Mn0.4O2 cathode was synthesized and shown to present initial improved electrochemical performance as well as significantly reduced oxygen evolution, as compared with the pristine, un-doped, system.

Insights into B-Site Ordering in Double Perovskite-Type Ba3Ca1+ xNb2- xO9-δ (0 ≤ x ≤ 0.45): Combined Synchrotron and Neutron Diffraction and Electrical Transport Analyses.

Perovskite-type metal oxides are being used in a wide range of technologies, including fuel cells, batteries, electrolyzers, dielectric capacitors, and sensors. One of their remarkable structural properties is cationic ordering in A or B sites, which affects electrical transport properties under different gaseous atmospheres, and chemical stability under CO2 and humid conditions. For example, a simple-perovskite-type Y-doped BaCeO3 forms BaCO3 and ((Ce,Y)O2-δ) under CO2 at elevated temperature, while B-site-ordered double-perovskite-type Ba3Ca1.18Nb1.82O9-δ remains chemically stable under the same conditions. Early structural studies on Ba3Ca1+ xNb2- xO9-δ (BCN) showed that the B-site ordering (1:1) is sensitive to the Ca content. However, ambiguity rises, as 1:2 B-site ordering was not observed in the parent and doped analogues when x was varied, which motivated us to revisit the complex oxides BCN ( x = 0-0.45) to determine the atomic structure by a mean of combined synchrotron X-ray and neutron diffraction methods. Surprisingly, the B-site ordering increases with increasing Ca/Nb mixing in the B-sites in BCN. In addition, the electrical conductivity of BCN was found to be the highest at x = ∼0.18, and it decreased as the Ca/Nb ratio further increased in BCN. Such a result was very similar to that for the Y-doped BaZrO3, where the mobility of proton carriers was found to decrease as the dopant (Y) increased. A higher Ca/Nb ratio also promotes the growth of grain size, as Ca ions could serve as a sintering aid, improving the structural integrity.

Role of Mn content on the electrochemical properties of nickel-rich layered LiNi(0.8-x)Co(0.1)Mn(0.1+x)O2 (0.0 ≤ x ≤ 0.08) cathodes for lithium-ion batteries.

Ni-rich layered oxides (Ni content >60%) are promising cathode candidates for Li-ion batteries because of their high discharge capacity, high energy density, and low cost. However, fast capacity fading, poor thermal stability, and sensitivity to the ambient moisture still plague their mass application. In this work, we systematically investigate the effects of Mn content on the structure, morphology, electrochemical performance, and thermal stability of the Ni-rich cathode materials LiNi(0.8-x)Co(0.1)Mn(0.1+x)O2 (0.0 ≤ x ≤ 0.08). It is demonstrated that with the increase in Mn content and decrease in Ni content, the cycling stability of LiNi(0.8-x)Co(0.1)Mn(0.1+x)O2 to a cutoff charge voltage of 4.5 V is significantly improved. The high-Mn-content electrode LiNi(0.72)Co(0.10)Mn(0.18)O2 shows a capacity retention of 85.7% after 100 cycles at a 0.2 C rate at room temperature, much higher than those of the lower Mn-content samples LiNi(0.80)Co(0.10)Mn(0.10)O2 (64.0%) and LiNi(0.76)Co(0.10)Mn(0.14)O2 (72.9%). The improved capacity retention of the high-Mn-content electrode LiNi(0.72)Co(0.10)Mn(0.18)O2 is due to the stabilization of the electrode/electrolyte interface, as evidenced by the lower solid-electrolyte interphase (SEI) resistance and charge-transfer resistance. Furthermore, with the increase in Mn content and decrease in Ni content, the thermal stability of the Ni-rich cathode is also remarkably enhanced.