On the Characteristics of Fatigue Fracture with Rapid Frequency Change.

The effect of sudden variations in working modes and fatigue behavior of CS 1018 is studied. A general model based on the framework of the fracture fatigue entropy (FFE) concept is developed to capture such changes. Fully reversed bending tests are performed on flat dog bone specimens with a series of variable frequency tests without turning the machine off to simulate fluctuating working conditions. The results are then post-processed and analyzed to assess how fatigue life changes when a component is subjected to sudden changes in multiple frequencies. It is demonstrated that regardless of the frequency changes, FFE remains constant and stays within a narrow band range, similar to that of a constant frequency.

Improvement of Tribological and Biocompatibility Properties of Orthopedic Materials Using Piezoelectric Direct Discharge Plasma Surface Modification.

Various types of alloys and polymers are utilized in orthopedic implants. However, there are still several issues accompanied by the use of prosthetic materials, such as low wear performance and catastrophic failure. Surface enhancement of biomaterials is a promising method that can improve the success rate of prosthetic operations without negatively affecting their bulk properties while improving the biocompatibility of implants and reducing infections. Nonthermal plasma treatment has become a ubiquitous surface modification method in sterilization and healthcare applications. However, the clinical applications of such an approach have been limited due to the lack of detailed studies delineating the wear behavior and biocompatibility of implants after plasma treatment. In this study, we have employed a handheld piezoelectric direct discharge (PDD) plasma generator to modify the surface of two common metallic (Ti6Al4V) and nonmetallic (GUR1020 polymer) biomaterials used typically in joint and disc replacements. We have observed an approximately 60-fold reduction in tribological wear rate along with a 2- to 3-fold increase in the biocompatibility properties of plasma coated samples compared to noncoated (untreated) surfaces, respectively. Our study introduces a novel application of nonthermal PDD plasma technology that is capable of increasing the quality and success rate of joint and disc replacements.