Structure modeling-based characterization of ChnD, the 6-hydroxyhexanoate dehydrogenase from Acinetobacter sp. strain NCIMB 9871.

α,ω-Dicarboxylic acids, ω-aminoalkanoic acids, and α,ω-diaminoalkanes are valuable building blocks for the production of biopolyesters and biopolyamides. One of the key steps in producing these chemicals is the oxidation of ω-hydroxycarboxylic acids using alcohol dehydrogenases (e.g., ChnD of Acinetobacter sp. NCIMB 9871). However, the reaction and structural features of these enzymes remain mostly undiscovered. Thereby, we have investigated characteristics of ChnD based on enzyme kinetics, substrate-docking simulations, and mutation studies. Kinetic analysis revealed a distinct preference of ChnD for medium chain ω-hydroxycarboxylic acids, with the highest catalytic efficiency of 18.0s-1∙mM-1 for 12-hydroxydodecanoic acid among C6 to C12 ω-hydroxycarboxylic acids. The high catalytic efficiency was attributed to the positive interactions between the carboxyl group of the substrates and the guanidino group of two arginine residues (i.e., Arg62 and Arg266) in the substrate binding site. The ChnD_R62L variant showed the increased efficiency and affinity, particularly for fatty alcohols (i.e., C6-C10) and branched-chain fatty alcohols, such as 3-methyl-2-buten-1-ol. Overall, this study contributes to the deeper understanding of medium-chain primary aliphatic alcohol dehydrogenases and their applications for the production of industrially relevant chemicals such as α,ω-dicarboxylic acids, ω-aminoalkanoic acids, and α,ω-diaminoalkanes from renewable biomass.

The Modulation of Respiratory Epithelial Cell Differentiation by the Thickness of an Electrospun Poly-ε-Carprolactone Mesh Mimicking the Basement Membrane.

The topology of the basement membrane (BM) affects cell physiology and pathology, and BM thickening is associated with various chronic lung diseases. In addition, the topology of commercially available poly (ethylene terephthalate) (PET) membranes, which are used in preclinical in vitro models, differs from that of the human BM, which has a fibrous and elastic structure. In this study, we verified the effect of BM thickness on the differentiation of normal human bronchial epithelial (NHBE) cells. To evaluate whether the thickness of poly-ε-carprolactone (PCL) mesh affects the differentiation of NHBE cells, cells were grown on thin- (6-layer) and thick-layer (80-layer) meshes consisting of electrospun PCL nanofibers using an air-liquid interface (ALI) cell culture system. It was found that the NHBE cells formed a normal pseudostratified epithelium composed of ciliated, goblet, and basal cells on the thin-layer PCL mesh; however, goblet cell hyperplasia was observed on the thick-layer PCL mesh. Differentiated NHBE cells cultured on the thick-layer PCL mesh also demonstrated increased epithelial-mesenchymal transition (EMT) compared to those cultured on the thin-layer PCL mesh. In addition, expression of Sox9, nuclear factor (NF)-κB, and oxidative stress-related markers, which are also associated with goblet cell hyperplasia, was increased in the differentiated NHBE cells cultured on the thick-layer PCL mesh. Thus, the use of thick electrospun PCL mesh led to NHBE cells differentiating into hyperplastic goblet cells via EMT and the oxidative stress-related signaling pathway. Therefore, the topology of the BM, for example, thickness, may affect the differentiation direction of human bronchial epithelial cells.

Mutational analysis of pig tissue factor pathway inhibitor α to increase anti-coagulation activity in pig-to-human xenotransplantation.

Blood coagulation mediated by pig tissue factor (TF), which is expressed in pig tissues, causes an instant blood-mediated inflammatory reaction during pig-to-human xenotransplantation. Previously, we generated a soluble pig tissue factor pathway inhibitor α fusion immunoglobulin (TFPI-Ig) which inhibits pig TF activity more efficiently than human TFPI-Ig in human plasma. In this study, we generated several pig TFPI-Ig mutants and tested the efficacy of these mutants in preventing pig-to-human xenogeneic blood coagulation. Structurally important amino acid residues of pig TFPI-Ig were changed into different residues by site-directed mutagenesis. Subsequently, a retroviral vector encoding each cDNA of several pig TFPI-Ig mutants was cloned and transduced into CHO-K1 cells. After establishing stable cell lines expressing each of the pig TFPI-Ig mutants, soluble proteins were produced and purified for evaluating their inhibitory effects on pig TF-mediated blood coagulation in human plasma. The replacement of K36 and K257 with R36 and H257, respectively, in pig TFPI-Ig more efficiently blocked pig TF activity in human plasma when compared with the wild-type pig TFPI-Ig. These results may provide additional information to understand the structure of pig TFPIα, and an improved pig TFPI-Ig variant that more efficiently blocks pig TF-mediated blood coagulation during pig-to-human xenotransplantation.

MAST4 regulates stem cell maintenance with DLX3 for epithelial development and amelogenesis.

The asymmetric division of stem cells permits the maintenance of the cell population and differentiation for harmonious progress. Developing mouse incisors allows inspection of the role of the stem cell niche to provide specific insights into essential developmental phases. Microtubule-associated serine/threonine kinase family member 4 (Mast4) knockout (KO) mice showed abnormal incisor development with low hardness, as the size of the apical bud was decreased and preameloblasts were shifted to the apical side, resulting in amelogenesis imperfecta. In addition, Mast4 KO incisors showed abnormal enamel maturation, and stem cell maintenance was inhibited as amelogenesis was accelerated with Wnt signal downregulation. Distal-Less Homeobox 3 (DLX3), a critical factor in tooth amelogenesis, is considered to be responsible for the development of amelogenesis imperfecta in humans. MAST4 directly binds to DLX3 and induces phosphorylation at three residues within the nuclear localization site (NLS) that promotes the nuclear translocation of DLX3. MAST4-mediated phosphorylation of DLX3 ultimately controls the transcription of DLX3 target genes, which are carbonic anhydrase and ion transporter genes involved in the pH regulation process during ameloblast maturation. Taken together, our data reveal a novel role for MAST4 as a critical regulator of the entire amelogenesis process through its control of Wnt signaling and DLX3 transcriptional activity.

Efficient Production of Enterovirus 71 (EV71) Virus-like Particles by Controlling Promoter Strength in Insect Cells.

This study was conducted to efficiently produce virus-like particles (VLPs) of enterovirus 71 (EV71), a causative virus of hand, foot, and mouth disease (HFMD). The expression level of the P1 precursor, a structural protein of EV71, was modified to increase VLP production, and the optimal expression level and duration of the 3CD protein for P1 cleavage were determined. The expression level and duration of 3CD were controlled by the p10 promoter, which was weakened by repeated burst sequence (BS) applications, as well as the OpIE2 promoter, which was weakened by the insertion of random untranslated region sequences of various lengths. The cleavage and production efficiency of the P1 precursor were compared based on the expression time and level of 3CD, revealing that the p10-BS5 promoter with four repeated BSs was the most effective. When P1 and 3CD were expressed using the hyperexpression vector and the p10-BS5 promoter, high levels of structural protein production and normal HFMD-VLP formation were observed, respectively. This study suggests that the production efficiency of HFMD-VLPs can be significantly enhanced by increasing the expression of the P1 precursor and controlling the amount and duration of 3CD expression.

S2 Peptide-Conjugated SARS-CoV-2 Virus-like Particles Provide Broad Protection against SARS-CoV-2 Variants of Concern.

Approved COVID-19 vaccines primarily induce neutralizing antibodies targeting the receptor-binding domain (RBD) of the SARS-CoV-2 spike (S) protein. However, the emergence of variants of concern with RBD mutations poses challenges to vaccine efficacy. This study aimed to design a next-generation vaccine that provides broader protection against diverse coronaviruses, focusing on glycan-free S2 peptides as vaccine candidates to overcome the low immunogenicity of the S2 domain due to the N-linked glycans on the S antigen stalk, which can mask S2 antibody responses. Glycan-free S2 peptides were synthesized and attached to SARS-CoV-2 virus-like particles (VLPs) lacking the S antigen. Humoral and cellular immune responses were analyzed after the second booster immunization in BALB/c mice. Enzyme-linked immunosorbent assay revealed the reactivity of sera against SARS-CoV-2 variants, and pseudovirus neutralization assay confirmed neutralizing activities. Among the S2 peptide-conjugated VLPs, the S2.3 (N1135-K1157) and S2.5 (A1174-L1193) peptide-VLP conjugates effectively induced S2-specific serum immunoglobulins. These antisera showed high reactivity against SARS-CoV-2 variant S proteins and effectively inhibited pseudoviral infections. S2 peptide-conjugated VLPs activated SARS-CoV-2 VLP-specific T-cells. The SARS-CoV-2 vaccine incorporating conserved S2 peptides and CoV-2 VLPs shows promise as a universal vaccine capable of generating neutralizing antibodies and T-cell responses against SARS-CoV-2 variants.

Enhanced Photocatalytic Activities of Sodium Borohydride-Calcined Magnetic Manganese Ferrite Nanoparticles.

The synthesis, enhancement, and maintenance of magnetite-based catalyst nanoparticles (NPs) are important for photocatalytic activity and recovery rates. We used a sodium borohydride (NaBH4) calcination method to modify MnFe2O4 nanoparticles to optimize their performance in the photocatalytic oxidation of 2,5-hydroxymethylfurfural. The results indicated a 94% increase in photocatalytic efficiency, while magnetic assessments performed using a vibrating sample magnetometer showed an 8.9% improvement in magnetic properties without degradation. These findings show the dual benefits of increased photocatalytic performance with strong magnetic properties, which are important for the application and reusability of photocatalysts. The recycling of these photocatalysts reduces secondary pollution and increases the process cost-effectiveness. These results contribute to the solution of problems with the use of photocatalytic materials.

Identification of Oil-Loving Cupriavidus necator BM3-1 for Polyhydroxyalkanoate Production and Assessing Contribution of Exopolysaccharide for Vegetable Oil Utilization.

Polyhydroxyalkanoates (PHA) have received attention owing to their biodegradability and biocompatibility, with studies exploring PHA-producing bacterial strains. As vegetable oil provides carbon and monomer precursors for poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)), oil-utilizing strains may facilitate PHA production. Herein, Cupriavidus necator BM3-1, which produces 11.1 g/L of PHB with 5% vegetable oil, was selected among various novel Cupriavidus necator strains. This strain exhibited higher preference for vegetable oils over sugars, with soybean oil and tryptone determined to be optimal sources for PHA production. BM3-1 produced 33.9 g/L of exopolysaccharides (EPS), which was three-fold higher than the amount produced by H16 (10.1 g/L). EPS exhibited 59.7% of emulsification activity (EI24), higher than that of SDS and of EPS from H16 with soybean oil. To evaluate P(3HB-co-3HHx) production from soybean oil, BM3-1 was engineered with P(3HB-co-3HHx) biosynthetic genes (phaCRa, phaARe, and phaJPa). BM3-1/pPhaCJ produced 3.5 mol% of 3HHx and 37.1 g/L PHA. BM3-1/pCB81 (phaCAJ) produced 32.8 g/L PHA, including 5.9 mol% 3HHx. Physical and thermal analyses revealed that P(3HB-co-5.9 mol% 3HHx) was better than PHB. Collectively, we identified a novel strain with high vegetable oil utilization capacity for the production of EPS, with the option to engineer the strain for P(3HB-co-3HHx).

Synergistic Tailoring of Electronic and Thermal Transports in Thermoelectric Se-Free n-Type (Bi,Sb)2Te3.

Se-free n-type (Bi,Sb)2Te3 thermoelectric materials, outperforming traditional n-type Bi2(Te,Se)3, emerge as a compelling candidate for practical applications of recovering low-grade waste heat. A 100% improvement in the maximum ZT of n-type Bi1.7Sb0.3Te3 is demonstrated by using melt-spinning and excess Te-assisted transient liquid phase sintering (LPS). Te-rich sintering promotes the formation of intrinsic defects (TeBi), elevating the carrier concentration and enhancing the electrical conductivity. Melt-spinning with excess Te fine-tunes the electronic band, resulting in a high power-factor of 0.35 × 10-3 W·m-1 K-2 at 300 K. Rapid volume change during sintering induces the formation of dislocation networks, significantly suppressing the lattice thermal conductivity (0.4 W·m-1 K-1). The developed n-type legs achieve a high maximum ZT of 1.0 at 450 K resulting in a 70% improvement in the output power of the thermoelectric device (7.7 W at a temperature difference of 250 K). This work highlights the synergy between melt-spinning and transient LPS, advancing the tailored control of both electronic and thermal properties in thermoelectric technology.

Biomarkers of Cellular Senescence and Aging: Current State-of-the-Art, Challenges and Future Perspectives.

Population aging has increased the global prevalence of aging-related diseases, including cancer, sarcopenia, neurological disease, arthritis, and heart disease. Understanding aging, a fundamental biological process, has led to breakthroughs in several fields. Cellular senescence, evinced by flattened cell bodies, vacuole formation, and cytoplasmic granules, ubiquitously plays crucial roles in tissue remodeling, embryogenesis, and wound repair as well as in cancer therapy and aging. The lack of universal biomarkers for detecting and quantifying senescent cells, in vitro and in vivo, constitutes a major limitation. The applications and limitations of major senescence biomarkers, including senescence-associated ß-galactosidase staining, telomere shortening, cell-cycle arrest, DNA methylation, and senescence-associated secreted phenotypes are discussed. Furthermore, explore senotherapeutic approaches for aging-associated diseases and cancer. In addition to the conventional biomarkers, this review highlighted the in vitro, in vivo, and disease models used for aging studies. Further, technologies from the current decade including multi-omics and computational methods used in the fields of senescence and aging are also discussed in this review. Understanding aging-associated biological processes by using cellular senescence biomarkers can enable therapeutic innovation and interventions to improve the quality of life of older adults.

Ovarian Metastasis from Human Papillomavirus-associated Usual-type Endocervical Adenocarcinoma: Clinicopathological Characteristics for Distinguishing from Primary Ovarian Mucinous or Endometrioid Tumor.

BACKGROUND/AIM: Distinguishing ovarian metastasis of usual-type endocervical adenocarcinoma (UEA) from primary ovarian tumors is often challenging because of several overlapping features. This study aimed to investigate the clinicopathological characteristics and outcomes of patients with metastatic ovarian UEA. PATIENTS AND METHODS: Clinicopathological information was collected from eight patients with metastatic ovarian UEA. Immunostaining was also performed. RESULTS: Most patients presented with adnexal masses that were suspected to be primary ovarian tumors. All examined cases showed block p16 positivity in paired primary and metastatic tumors. Five patients who completed post-operative chemotherapy or concurrent chemoradiotherapy (CCRT) did not experience recurrence. In contrast, one patient who refused further treatment after the first CCRT cycle experienced ovarian and peritoneal metastases. One patient with isolated ovarian metastasis left untreated and developed peritoneal metastasis during follow-up. CONCLUSION: Patients with UEA who received proper management for ovarian metastases showed favorable outcomes. Given that ovarian metastatic UEA can mimic primary ovarian borderline tumor or carcinoma of the mucinous or endometrioid type, pathologists should be aware of this unusual but distinctive morphology to avoid misdiagnosis and inappropriate treatment.

Outcomes of Colorectal Endoscopic Submucosal Dissection According to the Size of Colorectal Neoplasm: A HASID Multicenter Study.

BACKGROUND/AIM: Endoscopic submucosal dissection (ESD) is a valuable technique for treating colorectal neoplasms. However, there are insufficient data concerning the treatment outcomes in relation to the size of colorectal neoplasms. PATIENTS AND METHODS: The data on ESD for colorectal epithelial neoplasms between January 2015 and December 2020 were retrospectively collected from five tertiary medical centers. Colorectal neoplasms were stratified into groups based on their longitudinal diameter: <20 mm as Group 1, 20-39 mm as Group 2, 40-59 mm as Group 3, and 60 mm or more as Group 4. RESULTS: Of the 1,446 patients, 132 patients were in Group 1 (<20 mm), 1,022 in Group 2 (20-39 mm), 249 in Group 3 (40-59 mm), and 43 in Group 4 (≥60 mm). There was an observed trend of increasing age from Group 1 to Group 4, accompanied by a corresponding increase in the Charlson Comorbidity Index. Procedure time also exhibited a gradual increase from Group 1 to Group 4. Similarly, the length of hospital stay tended to increase from Group 1 to Group 4. The predictive model, using restricted cubic spline curves, revealed that as the size of lesion exceeded 30 mm, complete resection steadily decreased, and major complications notably increased. CONCLUSION: As the size of colorectal neoplasms increases, the rate of complete resection decreases and the rate of complications increases.

Structural Insights into the Rrp4 Subunit from the Crystal Structure of the Thermoplasma acidophilum Exosome.

The exosome multiprotein complex plays a critical role in RNA processing and degradation. This system governs the regulation of mRNA quality, degradation in the cytoplasm, the processing of short noncoding RNA, and the breakdown of RNA fragments. We determined two crystal structures of exosome components from Thermoplasma acidophilum (Taci): one with a resolution of 2.3 Å that reveals the central components (TaciRrp41 and TaciRrp42), and another with a resolution of 3.5 Å that displays the whole exosome (TaciRrp41, TaciRrp42, and TaciRrp4). The fundamental exosome structure revealed the presence of a heterodimeric complex consisting of TaciRrp41 and TaciRrp42. The structure comprises nine subunits, with TaciRrp41 and TaciRrp42 arranged in a circular configuration, while TaciRrp4 is located at the apex. The RNA degradation capabilities of the TaciRrp4:41:42 complex were verified by RNA degradation assays, consistent with prior findings in other archaeal exosomes. The resemblance between archaeal exosomes and bacterial PNPase suggests a common mechanism for RNA degradation. Despite sharing comparable topologies, the surface charge distributions of TaciRrp4 and other archaea structures are surprisingly distinct. Different RNA breakdown substrates may be responsible for this variation. These newfound structural findings enhance our comprehension of RNA processing and degradation in biological systems.

Compound Heterozygous Mutations of SACS in a Korean Cohort Study of Charcot-Marie-Tooth Disease Concurrent Cerebellar Ataxia and Spasticity.

Mutations in the SACS gene are associated with autosomal recessive spastic ataxia of Charlevoix-Saguenay disease (ARSACS) or complex clinical phenotypes of Charcot-Marie-Tooth disease (CMT). This study aimed to identify SACS mutations in a Korean CMT cohort with cerebellar ataxia and spasticity by whole exome sequencing (WES). As a result, eight pathogenic SACS mutations in four families were identified as the underlying causes of these complex phenotypes. The prevalence of CMT families with SACS mutations was determined to be 0.3%. All the patients showed sensory, motor, and gait disturbances with increased deep tendon reflexes. Lower limb magnetic resonance imaging (MRI) was performed in four patients and all had fatty replacements. Of note, they all had similar fatty infiltrations between the proximal and distal lower limb muscles, different from the neuromuscular imaging feature in most CMT patients without SACS mutations who had distal dominant fatty involvement. Therefore, these findings were considered a characteristic feature in CMT patients with SACS mutations. Although further studies with more cases are needed, our results highlight lower extremity MRI findings in CMT patients with SACS mutations and broaden the clinical spectrum. We suggest screening for SACS in recessive CMT patients with complex phenotypes of ataxia and spasticity.

Mechanical properties, cytotoxicity, and protein adsorption of three-dimensionally printable hybrid resin containing zwitterionic polymer and silicate-based composites for dental restorations.

OBJECTIVE: To evaluate the mechanical and biological properties of three-dimensionally (3D) printable resins filled with 2-methacryloyloxyethyl phosphorylcholine (MPC) and silicate-based composites and compare with those of a commercially available 3D-printable resin for definitive restorations. METHODS: A group of 3D-printable hybrid resins (HRs) filled with 6 wt% MPC and three different compositions of silicate-based composites (barium silicate to zirconium silicate ratios: 1.50:1 for HR1, 0.67:1 for HR2, and 0.25:1 for HR3) were prepared. The HR groups were compared with the commercially available unfilled 3D-printable resin (CR) marketed for definitive restorations in terms of flexural strength and modulus, fracture toughness, surface roughness, Vickers hardness, light transmittance (all, n = 15), cytotoxicity, and protein adsorption (both, n = 3). All data were analyzed by using non-parametric Kruskal-Wallis and Dunn's tests (α=0.05). RESULTS: The HR groups had significantly higher flexural strength, modulus, fracture toughness, and hardness values than the CR (P < 0.001). HR3 had the highest surface roughness and light transmittance among the groups (P ≤ 0.006). None of tested resins showed cytotoxicity. Both HR2 and HR3 showed significantly lower protein adsorption than the CR, with a difference of approximately 60% (P ≤ 0.026). CONCLUSION: Both HR2 and HR3 exhibited superior mechanical properties (flexural strength, flexural modulus, fracture toughness, and Vickers hardness), light transmittance, and protein-repellent activity than the CR, with no impact on cytotoxicity. CLINICAL SIGNIFICANCE: The MPC/silicate-based composite-filled resins may be a suitable alternative for definitive restorations, given their higher mechanical properties and promising biological properties to prevent microbial adhesion and subsequent biofilm formation, as well as their non-cytotoxic properties.

Effect of postpolymerization time and atmosphere on surface properties and biofilm formation in additively manufactured resins for definitive restorations.

OBJECTIVES: To investigate how postpolymerization time (PPT) and atmosphere (PPA) influence the surface properties, protein adsorption, and microbial adhesion of two types of additively manufactured (AM) resins used for definitive restorations. METHODS: Two different types of commercially available AM resins for definitive restorations (UR and CR) were used to create disk-shaped specimens. These specimens were divided into eight groups based on resin type (UR and CR), PPT (standard or extended), and PPA (air or nitrogen). After postpolymerization, the surface roughness (Ra and Sa) and surface free energy (SFE) of all specimens were measured. The study also evaluated protein adsorption, microbial attachment, and cytotoxicity. A non-parametric factorial analysis of variance with post-hoc analyses was conducted, using a significance level (α) of 0.05. RESULTS: The Ra and Sa values for CR were higher than those for UR, regardless of PPT or PPA (P < 0.05). For UR, SFE was higher with extended PPT compared to standard PPT. CR had higher SFE than UR under standard PPT. The interaction between PPT and PPA had a significant effect on protein adsorption (P < 0.05). When PPT was standard, nitrogen significantly increased protein adsorption compared to air. The interaction between resin type and PPA, and between resin type and PPT, significantly affected microbial adhesion (P < 0.05). The changes in PPT or PPA did not affect the cytotoxicity of either AM resin. CONCLUSION: Surface properties, protein adsorption, and microbial attachment were influenced by the interactions among PPT, PPA, and resin type. These factors can have implications for resin-based definitive restorations. CLINICAL SIGNIFICANCES: Clinicians should understand the impact of PPT and PPA on the surface properties of AM resins for definitive restorations, particularly regarding protein adsorption and microbial adhesion. Additionally, the type of AM resin (based on chemical composition) could affect its biological properties.

Clinical features and outcomes of posterior reversible encephalopathy syndrome after heart transplantation: a case series.

Posterior reversible encephalopathy syndrome (PRES) is a rare neurological disease that may be associated with hypertension, autoregulatory failure, and the use of calcineurin inhibitors following heart transplantation (HT). In this article, we present a case series of PRES, discussing its potential causes and management strategies. Among the 126 HT recipients at our hospital, four were diagnosed with PRES. Three of these patients developed PRES within 7 days after HT. Prior to the onset of PRES, all patients experienced sustained hypertension, and strict blood pressure (BP) control was maintained. Three of the four patients recovered without PRES recurrence, while one patient died of sepsis after an episode of altered consciousness. Hypertension was observed in all patients prior to the onset of PRES, and the majority experienced symptom improvement with BP control. While most cases of PRES were reversible with conservative treatment, including the administration of antiepileptics, one irreversible case resulted in in-hospital mortality. Thus, PRES can have serious outcomes and is not invariably benign.

Clinical outcomes of adjusted-dose versus standard-dose prasugrel in East Asian patients with acute myocardial infarction.

BACKGROUND: The comparative efficacy and safety of adjusted- and standard-dose prasugrel in East Asian patients with acute myocardial infarction (AMI) undergoing percutaneous coronary intervention (PCI) remain unclear. This study aimed to comparatively assess the ischaemic and bleeding outcomes of adjusted-dose (maintenance dose: 3.75 mg) and standard-dose (maintenance dose: 10 mg) prasugrel in East Asian patients with AMI undergoing PCI. METHODS: From a combined dataset sourced from nationwide AMI registries in Japan and South Korea (n = 17,118), patients treated with either adjusted- or standard-dose prasugrel were identified. Patients who did not undergo emergent PCI, those on oral anticoagulants, and those meeting the criteria of contraindication of prasugrel in South Korea (age ≥ 75 years, body weight < 60 kg, or history of stroke) were excluded. Major adverse cardiovascular events (MACE) and Thrombolysis in Myocardial Infarction (TIMI) major bleeding events were compared between the adjusted-dose (n = 1160) and standard-dose (n = 1086) prasugrel groups. RESULTS: Within the propensity-matched cohort (n = 702 in each group), no significant difference was observed in the in-hospital MACE between the adjusted- and standard-dose prasugrel groups (1.85% vs. 2.71%, odds ratio [OR] 0.68, 95% confidence interval [CI] 0.33-1.38, p = 0.286). However, the incidence of in-hospital major bleeding was significantly lower in the adjusted-dose prasugrel group than in the standard-dose group (0.43% vs. 1.71%, OR 0.25, 95% CI 0.07-0.88, p = 0.031). The cumulative 12-month incidence of MACE was equivalent in both groups (4.70% vs. 4.70%, OR 1.00, 95% CI 0.61-1.64, p = 1.000). CONCLUSIONS: Among East Asian patients with AMI undergoing PCI, those administered adjusted-dose prasugrel exhibited a lower risk of in-hospital bleeding events than those administered standard-dose prasugrel, while maintaining a comparable 1-year incidence of MACE.

Facile Synthesis of Surface-Modified Hollow-Silica (SiO2) Aerogel Particles via Oil-Water-Oil Double Emulsion Method.

Due to their high surface area and low weight, silica aerogels are ideally suited for several uses, including drug delivery, catalysis, and insulation. Oil-water-oil (OWO) double emulsion is a simple and regulated technique for encasing a volatile oil phase in a silica shell to produce hollow silica (SiO2) aerogel particles by using hydrophilic and hydrophobic emulsifiers. In this study, the oil-water-oil (OWO) double emulsion method was implemented to synthesize surface-modified hollow silica (SiO2) aerogel particles in a facile and effective way. This investigation mainly focused on the influence of the N-hexane-to-water glass (OW) ratio (r) in the first emulsion, silica (water glass) content concentration (x), and surfactant concentration (s) variations. Furthermore, surface modification techniques were utilized to customize the aerogel's characteristics. The X-ray diffraction (XRD) patterns showed no imprints of impurities except SiO2. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images highlight the hollow microstructure of silica particles. Zeta potential was used to determine particle size analysis of hollow silica aerogel particles. The oil-water-oil (OWO) double emulsion approach was successfully employed to synthesize surface-modified hollow silica (SiO2) aerogel particles, providing precise control over the particle characteristics. By the influence of the optimization condition, this approach improves the aerogel's potential applications in drug delivery, catalysis, and insulation by enabling surface modifications.