SupraPetrous InfraTemporal Approach: A Supplemental Approach to Supracerebellar Infratentorial for Inferior Amygdala and Hippocampal Head Access-A Cadaveric Study With Case Illustrations.

BACKGROUND AND OBJECTIVES: Access to the amygdala and hippocampus (A/H) is complex. To address the limitations and invasiveness of traditional approaches, including the Transsylvian, Subtemporal, and Supracerebellar infratentorial approaches, we developed the suprapetrous infratemporal (SPIT) approach. This study describes the nuances of this approach in both cadaveric studies and clinical cases. METHODS: Three unilateral exposures were performed using microscopic and endoscopic methodologies in the SPIT approach. After cadaveric investigation, this approach was successfully implemented in representative clinical cases. RESULTS: The SPIT approach enabled direct access to the inferior A/H, circumventing the requirement for temporal lobe retraction and detachment of the temporal lobe from the dura through a subtemporal route by drilling the upper part of the mastoid, consequently mitigating tension on the vein of Labbé. This enabled a bottom-up view because one would gain with a zygomatic osteotomy and forward projection like a mini-posterior petrosal view by using a transmastoid view, without cutting down the zygomatic arch and opening the dura subtemporally, limiting patient pain and preventing case comorbidity. The SPIT approach was performed in 2 cases of mesial temporal cavernoma presenting with seizures. The lesion was visualized intraoperatively and was successfully removed in these cases. The postoperative course was excellent with no complications, and gross total resection was radiographically confirmed with Engel Class 1a seizure freedom. CONCLUSION: The SPIT approach is a complementary approach for inferior A/H disease, combining the combined middle fossa approach modified for intradural pathology. Limited drilling of the upper aspect of the mastoid with a medial dural opening at the level of the arcuate eminence provides a direct trajectory with minimal brain retraction. Additional research encompassing a larger patient cohort and extended follow-up periods is required to substantiate the advantages of SPIT in the management of inferior A/H lesions.

Surgical Anatomy of the Retrosigmoid Approach With Transtentorial Extension: Protecting the 4th Cranial Nerve.

BACKGROUND AND OBJECTIVES: The retrosigmoid approach with transtentorial extension (RTA) allows us to address posterior cranial fossa pathologies that extend through the tentorium into the supratentorial space. Incision of the tentorium cerebelli is challenging, especially for the risk of injury of the cranial nerve (CN) IV. We describe a tentorial incision technique and relevant anatomic landmarks. METHODS: The RTA was performed stepwise on 5 formalin-fixed (10 sides), latex-injected cadaver heads. The porus trigeminus's midpoint, the lateral border of the suprameatal tubercle (SMT)'s base, and cerebellopontine fissure were assessed as anatomic landmarks for the CN IV tentorial entry point, and relative measurements were collected. A clinical case was presented. RESULTS: The tentorial opening was described in 4 different incisions. The first is curved and starts in the posterior aspect of the tentorium. It has 2 limbs: a medial one directed toward the tentorium's free edge and a lateral one that extends toward the superior petrosal sinus (SPS). The second incision turns inferiorly, medially, and parallel to the SPS down to the SMT. At that level, the second incision turns perpendicular toward the tentorium's free edge and ends 1 cm from it. The third incision proceeds posteriorly, parallel to the free edge. At the cerebellopontine fissure, the incision can turn toward and cut the tentorium-free edge (fourth incision). On average, the CN IV tentorial entry point was 12.7 mm anterior to the SMT base's lateral border and 20.2 mm anterior to the cerebellopontine fissure. It was located approximately in the same coronal plane as the porus trigeminus's midpoint, on average 1.9 mm anterior. CONCLUSION: The SMT and the cerebellopontine fissure are consistently located posterior to the CN IV tentorial entry point. They can be used as surgical landmarks for RTA, reducing the risk of injury to the CN IV.

Projection of realistic three-dimensional photogrammetry models using stereoscopic display: A technical note.

The 3D stereoscopic technique consists in providing the illusional perception of depth of a given object using two different images mimicking how the right and left eyes capture the object. Both images are slightly different and when overlapped gives a three-dimensional (3D) experience. Considering the limitations for establishing surgical laboratories and dissections courses in some educational institutions, techniques such as stereoscopy and photogrammetry seem to play an important role in neuroanatomy and neurosurgical education. The aim of this study was to describe how to combine and set up realistic models acquired with photogrammetry scans in 3D stereoscopic projections. Three donors, one dry skull, embalmed brain and head, were scanned using photogrammetry. The software used for displaying the final realistic 3D models (Blender, Amsterdam, the Netherlands) is a free software and allows stereoscopic projection without compromising the interactivity of each model. By default, the model was exported and immediately displayed as a red cyan 3D mode. The 3D projector used in the manuscript required a side-by-side 3D mode which was set up with simple commands on the software. The final stereoscopy projection offered depth perception and a visualization in 360° of each donor; this perception was noted especially when visualizing donors with different cavities and fossae. The combination of 3D techniques is of paramount importance for neuroanatomy education. Stereoscopic projections could provide a valuable tool for neuroanatomy instruction directed at clinical trainees and could be especially useful when access to laboratory-based learning is limited.

Foundations and guidelines for high-quality three-dimensional models using photogrammetry: A technical note on the future of neuroanatomy education.

Hands-on dissections using cadaveric tissues for neuroanatomical education are not easily available in many educational institutions due to financial, safety, and ethical factors. Supplementary pedagogical tools, for instance, 3D models of anatomical specimens acquired with photogrammetry are an efficient alternative to democratize the 3D anatomical data. The aim of this study was to describe a technical guideline for acquiring realistic 3D anatomic models with photogrammetry and to improve the teaching and learning process in neuroanatomy. Seven specimens with different sizes, cadaveric tissues, and textures were used to demonstrate the step-by-step instructions for specimen preparation, photogrammetry setup, post-processing, and display of the 3D model. The photogrammetry scanning consists of three cameras arranged vertically facing the specimen to be scanned. In order to optimize the scanning process and the acquisition of optimal images, high-quality 3D models require complex and challenging adjustments in the positioning of the specimens within the scanner, as well as adjustments of the turntable, custom specimen holders, cameras, lighting, computer hardware, and its software. MeshLab® software was used for editing the 3D model before exporting it to MedReality® (Thyng, Chicago, IL) and SketchFab® (Epic, Cary, NC) platforms. Both allow manipulation of the models using various angles and magnifications and are easily accessed using mobile, immersive, and personal computer devices free of charge for viewers. Photogrammetry scans offer a 360° view of the 3D models ubiquitously accessible on any device independent of operating system and should be considered as a tool to optimize and democratize the teaching of neuroanatomy.

The Lingual Process of the Sphenoid Bone and the Petrolingual Ligament: Surgical Anatomy, Landmarks, and Clinical Relevance.

BACKGROUND: The lingual process of the sphenoid bone (LP) and the petrolingual ligament (PLL) surround laterally the internal carotid artery within the middle cranial fossa (MCF). OBJECTIVE: To study the LP and the PLL and anatomical variations considering their relationships with different structures and landmarks within the MCF, especially oriented toward the endoscopic endonasal approaches. METHODS: Seventy-two sides of dry skulls and 20 sides of embalmed specimens were studied. The measurements of the LP and the PLL were obtained, considering important landmarks in the MCF. RESULTS: The LP had a mean length and height of 5 mm and 3 mm, respectively. Its distance from the foramen lacerum was 6 mm, from the foramen ovale 10 mm, foramen rotundum 15 mm, and petrous apex 9 mm. In 44 sides (61.11%), the LP partially closed the lateral aspect of the carotid sulcus; in 17 sides (23.61%), it was found as a near-ring; and in 11 sides (15.2%), it was considered rudimentary. Considering the PLL, its length and height were, respectively, 9 mm, and 4 mm. CONCLUSION: The LP and PLL separate the carotid artery at the inferior aspect of Meckel's cave and constitute important landmarks for endoscopic endonasal approaches to Meckel's cave and MCF, and their identification and removal is essential for internal carotid artery mobilization in this area.

Lengthening the nasoseptal flap pedicle with extended dissection into the pterygopalatine fossa.

OBJECTIVES/HYPOTHESIS: Releasing the nasoseptal flap (NSF) pedicle from the sphenopalatine artery (SPA) foramen may considerably improve flap reach and surface area. Our objectives were quantify increases in pedicle length and NSF reach through extended pedicle dissection into the pterygopalatine fossa (PPF) through cadaveric dissections and present clinical applications. STUDY DESIGN: Anatomical study and retrospective clinical cohort study. METHODS: Twelve cadaveric dissections were performed. Following standard NSF harvest, the distance from the anterior edge of the flap to the anterior nasal spine while pulling the flap anteriorly was measured. As dissection into the SPA foramen and PPF continued, similar interval measurements were completed in four stages after release from the SPA foramen, release of the internal maxillary artery (IMAX), and transection of the descending palatine artery (DPA). The extended pedicle dissection technique was performed in seven consecutive patients for a variety of different pathologies. RESULTS: The mean length of the NSF from the anterior nasal spine and maximum flap reach were 1.91 ± 0.40 cm/9.3 ± 0.39 cm following standard harvest, 2.52 ± 0.61 cm/9.75±1.06 cm following SPA foramen release, 4.93 ± 0.89 cm/12.16 ± 0.54 cm following full IMAX dissection, and 6.18 ± 0.68 cm/13.41 ± 0.75 cm following DPA transection. No flap dehiscence or necrosis was observed in all seven surgical patients. CONCLUSIONS: Extended pedicle dissection of the NSF to the SPA/IMAX markedly improves the potential length and reach of the flap. This technique may provide a feasible option for reconstruction of large anterior skull base and craniocervical junction defects. Seven successful cases are presented here, but further studies with larger series are warranted to validate findings in a clinical setting. LEVEL OF EVIDENCE: 4 Laryngoscope, 130:18-24, 2020.

The Placenta as an Organ and a Source of Stem Cells and Extracellular Matrix: A Review.

The placenta is a temporal, dynamic and diverse organ with important immunological features that facilitate embryonic and fetal development and survival, notwithstanding the fact that several aspects of its formation and function closely resemble tumor progression. Placentation in mammals is commonly used to characterize the evolution of species, including insights into human evolution. Although most placentas are discarded after birth, they are a high-yield source for the isolation of stem/progenitor cells and are rich in extracellular matrix (ECM), representing an important resource for regenerative medicine purposes. Interactions among cells, ECM and bioactive molecules regulate tissue and organ generation and comprise the foundation of tissue engineering. In the present article, differences among several mammalian species regarding the placental types and classifications, phenotypes and potency of placenta-derived stem/progenitor cells, placental ECM components and current placental ECM applications were reviewed to highlight their potential clinical and biomedical relevance.