Single 5-centimeter-aperture metalens enabled intelligent lightweight mid-infrared thermographic camera.

Existing mid-infrared thermographic cameras rely on a stack of refractive lenses, resulting in bulky and heavy imaging systems that restrict their broader utility. Here, we demonstrate a lightweight metalens-based thermographic camera (MTC) enabled by a single 0.5-mm-thick, 3.7-g-weight, flat, and mass-producible metalens. The large aperture size (5 cm) of our metalens, when combined with an uncooled focal plane array, enables thermal imaging at distances of tens of meters. By computationally removing the veiling glare, our MTC realizes the temperature mapping with an inaccuracy of less than ±0.7% within the range of 35° to 700°C and shows exceptional environmental adaptability. Furthermore, by using intelligent algorithms and spectral filtering, our uncooled MTC enables visualization and quantification of the SF6 gas leakage at a long distance of 5 m, with a remarkable minimum detectable leak rate of 0.2 sccm. Our work opens the door to the lightweight and multifunctional intelligent thermal imaging systems.

Indeno[3,2-b]carbazole-Based Small Molecule Layer Enables Optimized Carrier Transport for PbS Quantum Dot NIR Photodetectors.

Colloidal quantum dots (CQDs) have garnered considerable attention for photodetectors (PDs), attributable to exceptional photoelectric properties and ease solution-based processing. However, the prevalent use of 1,2-ethanedithiol (EDT) as a hole transport layer (HTL) has limitations, such as energy level discrepancies, requisite oxidation, and intricate multilayer assembly. Organic p-type materials, lauded for their superior attributes and synthetic versatility, are now stepping forward as viable substitutes for conventional EDT HTLs. In this work, we introduced an organic HTL derived from indolo[3,2-b]carbazole, named ZL004, leading to a marked improvement in carrier generation and collection, facilitated by the optimized band alignment and enhanced interfacial charge dynamics. The ZL004-based PDs exhibit a photoresponsivity of 0.45 A/W, a noise current of 1.8 × 10-11 A Hz-0.5, a specific detectivity of 4.6 × 109 Jones, and an expansive linear dynamic range of 107 dB─surpassing EDT-based devices across the board, demonstrating the extraordinary property of organic p-type materials for CQD-based PDs.

The interaction effect of metals exposure and dietary habit on cognitive function in Chinese older adult cohort.

BACKGROUND: As the important factors in cognitive function, dietary habits and metal exposures are interactive with each other. However, fewer studies have investigated the interaction effect of them on cognitive dysfunction in older adults. METHODS: 2,445 registered citizens aged 60-85 years from 51 community health centers in Luohu District, Shenzhen, were recruited in this study based on the Chinese older adult cohort. All subjects underwent physical examination and Mini-cognitive assessment scale. A semi quantitative food frequency questionnaire was used to obtain their food intake frequency, and 21 metal concentrations in their urine were measured. RESULTS: Elastic-net regression model, a machine learning technique, identified six variables that were significantly associated with cognitive dysfunction in older adults. These variables included education level, gender, urinary concentration of arsenic (As) and cadmium (Cd), and the frequency of monthly intake of egg and bean products. After adjusting for multiple factors, As and Cd concentrations were positively associated with increased risk of mild cognitive impairment (MCI) in the older people, with OR values of 1.19 (95% CI: 1.05-1.42) and 1.32 (95% CI: 1.01-1.74), respectively. In addition, older adults with high frequency of egg intake (≥30 times/month) and bean products intake (≥8 times/month) had a reduced risk of MCI than those with low protein egg intake (<30 times/month) and low bean products intake (<8 times/month), respectively. Furthermore, additive interaction were observed between the As exposure and egg products intake, as well as bean products. Cd exposure also showed additive interactions with egg and bean products intake. CONCLUSIONS: The consumption of eggs and bean products, as well as the levels of exposure to the heavy metals Cd and As, have been shown to have a substantial influence on cognitive impairment in the elderly population.

Patient-specific 3D-printed Brace for Adolescent Idiopathic Scoliosis: A Prospective Cohort Study.

OBJECTIVE: To evaluate the efficacy, safety of patient-tailored 3D printed brace in the treatment of adolescent idiopathic scoliosis (AIS), and to compare the health-related quality of life (HRQoL) of patients treated with two different types of brace. MATERIALS AND METHODS: From September 2017 to August 2020, 103 AIS patients requiring non-operative management were prospectively recruited in this study. All patients were followed up every 6 months, clinical and radiological examination were assessed at each follow-up time. Full-length anteroposterior X-ray of the spine in the standing position was performed obtained. At the last follow-up, each patient completed a standardized HRQoL questionnaire. Compliance is defined as that the patient insists on wearing the brace for ≥ 23h every day (full-time wearing) and follow-up every 6 months until bone maturity.The rate of major curve Cobb progression was defined that maximum Cobb Angle of major curve greater than 6° compared with that at the initial diagnosis, or aggravated to more than 45° so that orthopedic surgery was recommended during treatment, which was defined as the rate of conversion to surgery. The effects of these two types of braces on the rate of major curve Cobb progression and HRQoL were analyzed by independent sample t-test ad Chi-square test. RESULTS: The thickness was 4 mm for thoracolumbosacral orthosis (TLSO) and 3 mm for 3D-printed brace (3DPB). In addition, compared with the material used in TLSO, the weight (600-800 grams) of the 3DPB materials with the same area is reduced by about 25-30%. 55 patients (49.1%) and 48 patients (33.1%) were respectively included in the 3DPB cohort and the TLSO cohort.The maximum Cobb angle of major curve in the 3DPB cohort was significantly lower than those in the TLSO cohort at 6 months, 12 months and the last follow-up (p < 0.01). The thoracic kyphosis (TK) and lumbar lordosis (LL) of the two cohorts at the last follow-up were lower than those before brace treatment, in addition, there was a significant difference in TK (p = 0.001) and LL (p = 0.004) between the two cohorts at the follow-up. The scores of physical function, pain, self-image, mental health and treatment satisfaction in the Chinese version of SRS-22 in the 3DPB cohort were higher than those in the TLSO cohort (p < 0.01 and p < 0.05, respectively). The scores of the 3DPB cohort were significantly higher than those of the TLSO group in the four dimensions (p = 0.008, 0.013, 0.015, and 0.002, respectively) of the EuroQol-5D health description system except for mobility, and the overall health status of EuroQol-5D was higher for the 3DPB cohort (p < 0.001). At the last follow-up, One patient in the 3DPB cohort and ten patients in the TLSO cohort had major curve Cobb progression of greater than 6°, and the rate of major curve Cobb progression in 3DPB cohort was significantly lower than that in the TLSO cohort (OR 14.2, 95% CI 1.7∼115.8, p < 0.01). One patient in the 3DPB and seven patients in the TLSO cohorts received subsequent surgery or was recommended for surgery, and the rate of conversion to surgery was significantly lower than in the 3DPB cohort (OR 9.2, 95% CI 1.1∼77.9, p < 0.05). CONCLUSIONS: Patient-tailored 3D-printed brace is lighter, thinner, and more comfortable than conventional braces in the treatment of AIS. It can substantially improve the HRQoL of patients and can significantly reduce the progression of major curve Cobb progression and rate of conversion of surgery.

Modified pedicle subtraction osteotomy for osteoporotic vertebral compression fractures: a retrospective study of 104 patients.

BACKGROUND: Osteoporotic vertebral compression fractures (OVCF) caused by osteoporosis is a common clinical fracture type. There are many surgical treatment options for OVCF, but there is a lack of comparison among different options. Therefore, we counted a total of 104 cases of OVCF operations with different surgical plans, followed up the patients, and compared the surgical outcome indications before, after and during the follow-up. METHOD: 104 patients who underwent posterior osteotomy (Modified PSO, SPO, PSO, VCR) and kyphosis correction surgery at our hospital between April 2006 and August 2021 with a minimum follow-up period of 24 months were included. All cases were injuries induced by a fall incurred while standing or lifting heavy objects without high-energy trauma. The mean CT value was 71 HU, which was below 110 HU, indicating severe osteoporosis. The indications for surgery included gait disturbance due to severe pain with pseudarthrosis, increased kyphotic angle, and progressive neurological symptoms. Pre- and postoperative CL, TLK, TK, PrTK, TKmax, GK, LL, PI, SS, PT, SVA, TPA, were investigated radiologically. Additionally, We evaluated estimated blood loss, surgical time and perioperative symptom. RESULT: The results show, after operation, TLK (37.32 ± 10.61° vs. 11.01 ± 8.06°, P < 0.001), TK (35.42 ± 17.64° vs. 25.62 ± 12.24°, P < 0.001), TKmax (49.71 ± 16.32° vs. 24.12 ± 13.34°, P < 0.001), SVA (44.91 ± 48.67 vs. 23.52 ± 30.21, P = 0.013), CL (20.23 ± 13.21° vs. 11.45 ± 9.85°, P = 0.024) and TPA (27.44 ± 12.76° vs. 13.91 ± 9.24°, P = 0.009) were improved significantly in modified Pedicle subtraction osteotomy (mPSO) after operation. During follow-up, TLK (37.32 ± 10.61° vs. 13.88 ± 10.02°, P < 0.001) and TKmax (49.71 ± 16.32° vs. 24.12 ± 13.34°, P < 0.001) were improved significantly in Modified PSO group. In additon, estimated blood loss (790.0 ± 552.2 ml vs. 987.0 ± 638.5 ml, P = 0.038), time of operation (244.1 ± 63.0 min vs. 292.4 ± 87.6 min, P = 0.025) were favorable in Modified PSO group compared to control group. CONCLUSION: To conclude, mPSO could acquire a favorable degree of kyphosis correction as well as fewer follow-up complications. Compared with other surgical methods, it also has the advantages of less surgical trauma and shorter operation time. It can be an effective solution for the treatment of OVCF.

Colorectal cancer cells with high metastatic potential drive metastasis by transmitting exosomal miR-20a-3p through modulating NF1/MAPK pathway.

Cancer cells exhibit heterogenous metastatic potential, and high metastatic subclones can enhance metastatic potential of low metastatic subclones by transmitting some factors. Exosomal miRNAs play a pivotal role in the crosstalk of heterogenous metastatic subclones. This study discovered that miR-20a-3p was upregulated in colorectal adenocarcinoma (CRA), correlated with metastasis, and potentially served as a prognostic indicator for CRA. miR-20a-3p could promote the proliferation, migration and invasion of CRA cells. Interestingly, high metastatic CRA cells could promote malignant phenotypes of low metastatic CRA cells by transmitting exosomal miR-20a-3p. Mechanically, miR-20a-3p could inhibit NF1, thereby activate the RAS-mediated mitogen-activated protein kinases (MAPK) signaling pathway to drive the metastasis of CRA. In summary, our study provided the evidence that colorectal cancer cells with high metastatic potential drive metastasis by transmitting exosomal miR-20a-3p through modulating NF1/MAPK pathway.

Anchoring Single-Atomic Metal Sites in Metalloporphyrin-Based Covalent Organic Frameworks for Enhanced Photocatalytic Hydrogen Evolution.

A photoactive covalent organic framework (COF) was built from metalloporphyrin and bipyridine monomers and single-atomic Pt sites were subsequently installed. Integrating photosensitizing metalloporphyrin and substrate-activating Pt(bpy) moieties in a single solid facilitates multielectron transfer and accelerates photocatalytic hydrogen evolution with a maximum production rate of 80.4 mmol h-1 gPt -1 and turnover frequency (TOF) of 15.7 h-1 observed. This work demonstrates that incorporation of single-atomic metal sites with photoactive COFs greatly enhances photocatalytic activity and provides an effective strategy for the design and construction of novel photocatalysts.

Comparative genomics of two Asian medicinal leeches Hirudo nipponia and Hirudo tianjinensis: With emphasis on antithrombotic genes and their corresponding proteins.

Leeches secrete various biologically active substances which have important medical and pharmaceutical values in antithrombotic treatments. Here, we provide a high quality genome of two Asian medicinal leeches Hirudo nipponia and Hirudo tianjinensis, based on which, we identified 22 antithrombotic gene families, including fourteen coagulation inhibitors, four platelet aggregation inhibitors, three fibrinolysis enhancers, and one tissue penetration enhancer. The total numbers of antithrombotic genes were similar between H. nipponia (N = 86) and H. tianjinensis (N = 83). Molecular evolution analysis showed that no significant differences were detected between the two species in any of the three selection indices (dN, dS, and dN/dS), nor in the number of sites under positive/purifying selection. RNA-Seq based gene expression analysis showed that the overall expression patterns of the antithrombotic gene families were not significantly deviated between the two species. Our results indicated that there were rather close similarities between the two leeches on genomic characteristics, especially for the molecular evolution and expression of antithrombotic genes. Our study provides the most comprehensive collection of antithrombotic biomacromolecules from the two Asian medicinal leeches to date. These results will greatly facilitate the research and application of leech derivatives for medical and pharmaceutical purposes of thrombosis.

Template-Confined Oriented Perovskite Nanowire Arrays Enable Polarization Detection and Imaging.

Polarized light detection can effectively identify the difference between the polarization information on the target and the background, which is of great significance for detection in complex natural environments and/or extreme weather. Generally, polarized light detection inevitably relies on anisotropic structures of photodetector devices, while organic-inorganic hybrid perovskites are ideal for anisotropic patterning due to their simple and efficient preparation by solution method. Compared to patterned thin films, patterned arrays of aligned one-dimensional (1D) perovskite nanowires (PNWAs) have fewer grain boundaries and lower defect densities, making them well suited for high-performance polarization-sensitive photodetectors. Here, we fabricated PNWAs crystallographically aligned with variable line widths and alignment densities employing CD-ROM and DVD-ROM grating pattern template-confined growth (TCG) methods. The photodetectors constructed from MAPbI3 PNWAs achieved responsivity of 35.01 A/W, detectivity of 6.85 × 1013 Jones, and fast response with a rise time of 172 µs and fall time of 114 µs. They were successfully applied to high-performance polarization detection with a polarization ratio of 1.81, potentially applicable in polarized light detection systems.

Over 60 h of Stable Water-Operation for N-Type Organic Electrochemical Transistors with Fast Response and Ambipolarity.

Organic electrochemical transistors (OECTs) are of great interest in low-power bioelectronics and neuromorphic computing, as they utilize organic mixed ionic-electronic conductors (OMIECs) to transduce ionic signals into electrical signals. However, the poor environmental stability of OMIEC materials significantly restricts the practical application of OECTs. Therefore, the non-fused planar naphthalenediimide (NDI)-dialkoxybithiazole (2Tz) copolymers are fine-tuned through varying ethylene glycol (EG) side chain lengths from tri(ethylene glycol) to hexa(ethylene glycol) (namely P-XO, X = 3-6) to achieve OECTs with high-stability and low threshold voltage. As a result, the NDI-2Tz copolymers exhibit ambipolarity, rapid response (<10 ms), and ultra-high n-type stability. Notably, the P-6O copolymers display a threshold voltage as low as 0.27 V. They can operate in n-type mode in an aqueous solution for over 60 h, maintaining an on-off ratio of over 105. This work sheds light on the design of exceptional n-type/ambipolar materials for OECTs. It demonstrates the potential of incorporating these ambipolar polymers into water-operational integrated circuits for long-term biosensing systems and energy-efficient brain-inspired computing.

Samarium-Oxo/Hydroxy Cluster: A Solar Photocatalyst for Chemoselective Aerobic Oxidation of Thiols for Disulfide Synthesis.

Oxidation contributes as a secondary driver of the prevailing carbon emission in the chemical industries. To address this issue, photocatalytic aerobic oxidation has emerged as a promising alternative. However, the challenge of achieving satisfactory chemoselectivity and effective use of solar light has hindered progress in this area. In this context, the present study introduces a novel homogeneous photocatalyst, [Sm6O(OH)8(H2O)24]I8(H2O)8 cluster (Sm-OC), via a unique auxiliary ligand-free oxidative hydrolysis. Using Sm-OC as catalyst, a solar photocatalyzed aerobic oxidation of thiols has been developed for the synthesis of valuable disulfides. Remarkably, this catalyst manifested a significant turnover number ≥2000 under tested conditions. Sm-OC-catalyzed aerobic oxidation showcased remarkable chemoselectivity. In thiol oxidations, despite the vulnerability of disulfides toward overoxidation, overoxidized byproducts or oxidation of nontarget functional groups was not detected across all 28 tested substrates. This investigation presents the first application of a lanthanide-oxo/hydroxy cluster in photocatalysis.

A Bioinspired Copper-Pair Catalyst in Metal-Organic Frameworks for Molecular Dioxygen Activation and Aerobic Oxidative C-N Coupling.

Open Cu sites were loaded to the UiO-67 metal-organic framework (MOF) skeleton by introduction of flexible Cu-binding pyridylmethylamine (pyma) side chains to the biphenyldicarboxylate linkers. Distance between Cu centers in the MOF pores was tuned by controlling the density of metal-binding side chains. "Interacted" Cu-pair or "isolated" monomeric Cu sites were achieved with high and low (pyma)Cu side chain loading, respectively. Spectroscopic and theoretical studies indicate that "interacted" Cu pairs can effectively bind and activate molecular dioxygen to form Cu2O2 clusters, which showed high catalytic activity for aerobic oxidative C-N coupling. On the contrary, MOF catalyst bearing isolated monomeric Cu sites only showed modest catalytic activity. Enhancement in catalytic performance for the Cu-pair catalyst is attributed to the remote synergistic effect of the paired Cu site, which binds molecular dioxygen and cleaves the O═O bond in a collaborative manner. This work demonstrates that noncovalently interacted metal-pair sites can effectively activate inert small molecules and promote heterogeneous catalytic processes.

Clinical Relevance of the Variability of the Infraorbital Arterial Anatomy Evaluated by Three-Dimensional Computed Tomography.

BACKGROUND: Knowledge of the anatomy of the infraorbital artery (IOA) is crucial for the rejuvenation of the anterior medial aspect of the midface; however, studies adequately describing the anatomy of the IOA branches are lacking, and their connection with the ophthalmic artery branches remains unclear. OBJECTIVES: This study aims to elucidate the anatomical characteristics of the IOA in its deployment within the lower eyelid using three-dimensional (3D) technology, thereby offering an anatomical foundation for clinical surgical procedures. METHODS: An analysis was conducted on computed tomography scans of 132 cadaveric head sides post-contrast injection, utilizing the Mimics software for reconstruction. The study focused on examining the anastomosis of the IOA, its principal branches, and the branches emanating from the ophthalmic artery. RESULTS: The prevalence of type I IOA was observed at 38.6% (51/132), while Type II IOA was found in 61.4% (81/132) of cases. A 7.6% incidence (10/132) of IOA directly anastomosing with the angular artery was noted. The presence of palpebral branches (PIOA) was identified in 57.6% (76/132) of instances. In the lower eyelid, four distinct distribution patterns of IOA were discerned: The likelihood of Type I PIOA was 5.3%, whereas for Types IIA, IIB, and IIC PIOA, the probabilities were 8.3%, 32.6%, and 11.4%, respectively. The occurrence of the orbital branch of IOA was recorded at 41.7% (55/132). CONCLUSIONS: 3D technology can map IOA variants and identify the deployment patterns of IOA branches in the lower eyelid vascular vesicles at high resolution as a guide in clinical practice. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

CoCl2-Induced hypoxia promotes hPDLSCs osteogenic differentiation through AKT/mTOR/4EBP-1/HIF-1α signaling and facilitates the repair of alveolar bone defects.

Bone defects are characterized by a hypoxic environment, which affects bone tissue repair. However, the role of hypoxia in the repair of alveolar bone defects remains unclear. Human periodontal ligament stem cells (hPDLSCs) are high-quality seed cells for repairing alveolar bone defects, whose behavior changes under hypoxia. However, their mechanism of action is not known and needs to be elucidated. We hypothesized that hypoxia might be beneficial to alveolar bone defect repair and the osteogenic differentiation of hPDLSCs. To test this hypothesis, cobalt chloride (CoCl2) was used to create a hypoxic environment, both in vitro and in vivo. In vitro study, the best osteogenic effect was observed after 48 h of hypoxia in hPDLSCs, and the AKT/mammalian target of rapamycin/eukaryotic translation initiation factor 4e-binding protein 1 (AKT/mTOR/4EBP-1) signaling pathway was significantly upregulated. Inhibition of the AKT/mTOR/4EBP-1 signaling pathway decreased the osteogenic ability of hPDLSCs under hypoxia and hypoxia-inducible factor 1 alpha (HIF-1α) expression. The inhibition of HIF-1α also decreased the osteogenic capacity of hPDLSCs under hypoxia without significantly affecting the level of phosphorylation of AKT/mTOR/4EBP-1. In vitro study, Micro-CT and tissue staining results show better bone regeneration in hypoxic group than control group. These results suggested that hypoxia promoted alveolar bone defect repair and osteogenic differentiation of hPDLSCs, probably through AKT/mTOR/4EBP-1/HIF-1α signaling. These findings provided important insights into the regulatory mechanism of hypoxia in hPDLSCs and elucidated the effect of hypoxia on the healing of alveolar bone defects. This study highlighted the importance of physiological oxygen conditions for tissue engineering.

The Safety of Injections in the Infraorbital Region.

BACKGROUND:  Infraorbital filler injection is a commonly used minimally invasive cosmetic procedure on the face, which can cause vascular complications. OBJECTIVE:  In this study, we aimed to explore the anatomical structure of the infraorbital vasculature and to establish an accurate protocol for infraorbital filler injection. METHODS:  The vascular structure of the infraorbital region was evaluated in 84 hemifacial specimens using computed tomography. Four segments (P1-P4) and five sections (C1-C5) were considered. We recorded the number of identified arteries in each slice and at each location and the number of deep arteries. Furthermore, we also measured the infraorbital artery (IOA) distribution. RESULTS:  At P1-P4, the lowest number of arteries was detected in segment P4, with a 317/1727 (18.4%) and 65/338 (2.3%) probability of total and deep arterial identification, respectively. The probabilities of encountering an identified artery at the five designated locations (C1-C5) were 277/1727 (16%), 318/1727 (18.4%), 410/1727 (23.7%), 397/1727 (23%), and 325/1727 (18.8%), respectively. The probability of an IOA being identified at C2 was 68/84 (81%). CONCLUSION:  We described an effective filler injection technique in the infraorbital region to minimize the associated risks. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Persistent high sepsis-induced coagulopathy and sequential organ failure assessment scores can predict the 28-day mortality of patients with sepsis: A prospective study.

BACKGROUND: The performance of the sepsis-induced coagulopathy (SIC) and sequential organ failure assessment (SOFA) scores in predicting the prognoses of patients with sepsis has been validated. This study aimed to investigate the time course of SIC and SOFA scores and their association with outcomes in patients with sepsis. METHODS: This prospective study enrolled 209 patients with sepsis admitted to the emergency department. The SIC and SOFA scores of the patients were assessed on days 1, 2, and 4. Patients were categorized into survivor or non-survivor groups based on their 28-day survival. We conducted a generalized estimating equation analysis to evaluate the time course of SIC and SOFA scores and the corresponding differences between the two groups. The predictive value of SIC and SOFA scores at different time points for sepsis prognosis was evaluated. RESULTS: In the non-survivor group, SIC and SOFA scores gradually increased during the first 4 days (P < 0.05). In the survivor group, the SIC and SOFA scores on day 2 were significantly higher than those on day 1 (P < 0.05); however, they decreased on day 4, dropping below the levels observed on day 1 (P < 0.05). The non-survivors showed higher SIC scores on days 2 (P < 0.05) and 4 (P < 0.001) than the survivors, whereas no significant differences were found between the two groups on day 1 (P > 0.05). The performance of SIC scores on day 4 for predicting mortality was more accurate than that on day 2, with areas under the curve of 0.749 (95% confidence interval [CI]: 0.674-0.823), and 0.601 (95% CI: 0.524-0.679), respectively. The SIC scores demonstrated comparable predictive accuracy for 28-day mortality to the SOFA scores on days 2 and 4. Cox proportional hazards models indicated that SIC on day 4 (hazard ratio [HR] = 3.736; 95% CI: 2.025-6.891) was an independent risk factor for 28-day mortality. CONCLUSIONS: The time course of SIC and SOFA scores differed between surviving and non-surviving patients with sepsis, and persistent high SIC and SOFA scores can predict 28-day mortality.

Factors influencing delayed high-dose methotrexate excretion and its correlation with adverse reactions after treatment in children with malignant hematological tumors.

Background: High-dose methotrexate (HDMTX) is crucial in treating pediatric malignant hematological tumors. However, its use is often complicated by delayed excretion and associated adverse reactions, which can significantly affect treatment outcomes and patient safety. Identifying risk factors is essential for safer, more effective therapy. This study aimed to investigate the influencing factors for delayed excretion and their correlation with adverse reactions in children with malignant hematological tumors after receiving HDMTX chemotherapy. Methods: From April to October 2021, the clinical information of children who had undergone HDMTX chemotherapy and had their blood tested for drug concentration was gathered by the Department of Hematology and Oncology at Shanghai Children's Medical Center. Via univariate and multivariate logistic regression, the factors affecting the delayed excretion of HDMTX were examined, and the relationship between delayed excretion and unfavorable effects in children was determined. Results: This study included 99 patients comprising 199 courses of HDMTX. The occurrence rate of HDMTX delayed excretion was 20.1%. Age ≥9 years and a 24-hour methotrexate (MTX) concentration of 64 µmol/L were independent risk factors for delayed MTX excretion according to multivariate logistic regression analysis (P<0.05). Negative side effects, such as fever, infection, mucositis, gastrointestinal response, and decreased platelet count in children with delayed excretion were statistically significant when compared to those of children with normal excretion. White blood cell reduction, hemoglobin levels below 65 g/L, MTX excretion delay, and concomitant etoposide treatment were all independent risk factors for infection in children. Conclusions: To estimate the risk of delayed MTX excretion during HDMTX therapy, patient laboratory data should be scrutinized, especially for patients ≥9 years or those with a 24-hour MTX concentration of greater than 64 µmol/L.

Zhuang-Gu-Fang intervenes vasculogenic and osteogenic coupling in GK rats through Notch1/Noggin/VEGF pathway.

Background: Zhuang-Gu-Fang (ZGF) has been proved to treat osteoporosis in ovariectomized rats by increasing osteogenic related factors Leptin, Ghrelin and Peptide YY(PYY). However, the mechanism of ZGF in the treatment of diabetic osteoporosis (DOP) remains unclear. The aim of this study was to explore the therapeutic effect of ZGF on DOP and its potential molecular mechanism. Methods: Using GK rats as models, the pharmacodynamic effects of ZGF on bone loss were evaluated by hematoxylin-eosin (H&E) staining and micro-computed.tomography (micro-CT). The expression levels of CD31 and endomucin (Emcn) were detected by immunofluorescence to assess the role of ZGF in angiogenic osteogenic coupling. Finally, real-time quantitative PCR (RT-PCR) and Western Blot (WB)were used to detect the expression levels of osteogenic and angiogenesis-related genes and proteins Notch1, Noggin and vascular endothelial growth factor (VEGF). Results: Administration of ZGF demonstrated a significant mitigation of bone loss attributable to elevated glucose levels. H&E staining and micro-CT showed that ZGF notably improved the integrity of the trabecular and cortical bone microarchitecture. Moreover, ZGF was found to augment the density of type H vessels within the bone tissue, alongside elevating the expression levels of Osterix, a transcription factor pivotal for bone formation. Furthermore, our findings suggest that ZGF facilitates the activation of the Notch1/Noggin/VEGF pathway, indicating a potential mechanism through which ZGF exerts its osteoprotective effects. Conclusion: Our results suggest that ZGF potentially facilitates the formation of type H vessels through the Notch1/Noggin/VEGF pathway. This action not only enhances angiogenic-osteogenic coupling but also contributes to the improvement of bone structure and density. Consequently, ZGF emerges as a promising therapeutic agent for the prevention and management of DOP, offering a novel approach by leveraging angiogenesis-dependent osteogenesis.

Particle Swarm Optimization of Multilayer Multi-Sized Metamaterial Absorber for Long-Wave Infrared Polarimetric Imaging.

Infrared polarization imaging holds significant promise for enhancing target recognition in both civil and defense applications. The Division of Focal Plane (DoFP) scheme has emerged as a leading technology in the field of infrared polarization imaging due to its compact design and absence of moving parts. However, traditional DoFP solutions primarily rely on micro-polarizer arrays, necessitating precise alignment with the focal plane array and leading to challenges in alignment and the introduction of optical crosstalk. Recent research has sought to augment the performance of infrared detectors and enable polarization and spectral selection by integrating metamaterial absorbers with the pixels of the detector. Nevertheless, the results reported so far exhibit shortcomings, including low polarization absorption rates and inadequate polarization extinction ratios. Furthermore, there is a need for a comprehensive figure of merit to systematically assess the performance of polarization-selective thermal detectors. In this study, we employ the particle swarm optimization algorithm to present a multilayer, multi-sized metamaterial absorber capable of achieving a remarkable polarization-selective absorption rate of up to 87.2% across the 8-14 µm spectral range. Moreover, we attain a polarization extinction ratio of 38.51. To elucidate and predict the resonant wavelengths of the structure, we propose a modified equivalent circuit model. Our analysis employs optical impedance matching to unveil the underlying mechanisms responsible for the high absorption. We also introduce a comprehensive figure of merit to assess the efficacy of infrared polarization detection through the integration of metamaterials with microbolometers. Finally, drawing on the proposed figure of merit, we suggest future directions for improving integrated metamaterial absorber designs, with the potential to advance practical mid-infrared polarization imaging technologies.

Distal Junctional Failures in Degenerative Thoracolumbar Hyperkyphosis.

OBJECTIVE: Degenerative thoracolumbar hyperkyphosis (DTH) is a disease that negatively affects individual health and requires surgical intervention, yet the ideal surgical approach and complications, especially distal junctional failures (DJF), remain poorly understood. This study aims to investigate DJF in DTH and to identify the risk factors for DJF so that we can improve surgical decision-making, and advance our knowledge in the field of spinal surgery to enhance patient outcomes. METHODS: This study retrospectively reviewed 78 cases (late osteoporotic vertebral compression fracture [OVCF], 51; Scheuermann's kyphosis [SK], 17; and degenerative disc diseases [DDD], 10) who underwent corrective surgery in our institute from 2008 to 2019. Clinical outcomes were assessed using health-related quality of life (HRQOL) measures, including the visual analogue scale (VAS) scores for back and leg pain, the Oswestry disability index (ODI), and the Japanese Orthopaedic Association (JOA) scoring system. Multiple radiographic parameters, such as global kyphosis (GK) and thoracolumbar kyphosis (TLK), were assessed to determine radiographic outcomes. Multivariate logistic regression analysis was employed to identify the risk factors associated with DJF. RESULTS: HRQOL improved, and GK, TLK decreased at the final follow-up, with a correction rate of 67.7% and 68.5%, respectively. DJF was found in 13 of 78 cases (16.7%), two cases had wedging in the disc (L3-4) below the instrumentation, one case had a fracture of the lowest instrumented vertebrae (LIV), one case had osteoporotic fracture below the fixation, nine cases had pull-out or loosening of the screws at the LIV and three cases (23.1%) required revision surgery. The DJF group had older age, lower computed tomography Hounsfield unit (CT HU), longer follow-up, more blood loss, greater preoperative sagittal vertical axis (SVA), and poorer postoperative JOA and VAS scores (back). The change in TLK level was larger in the non-DJF group. Post-sagittal stable vertebrae (SSV) moved cranially compared with pre-SSV. CONCLUSION: Age, CT HU, length of follow-up, estimated blood loss, and preoperative SVA were independent risk factors for DJF. We recommend fixation of the two vertebrae below the apex vertebrae for DTH to minimize surgical trauma.