RESUMO
Realizing the full potential of organoids and assembloids to model neural development and disease will require improved methods for long-term, minimally invasive recording of electrical activity. Current technologies, such as patch clamp, penetrating microelectrodes, planar electrode arrays and substrate-attached flexible electrodes, do not allow chronic recording of organoids in suspension, which is necessary to preserve architecture. Inspired by kirigami art, we developed flexible electronics that transition from a two-dimensional to a three-dimensional basket-like configuration with either spiral or honeycomb patterns to accommodate the long-term culture of organoids in suspension. Here we show that this platform, named kirigami electronics (KiriE), integrates with and enables chronic recording of cortical organoids for up to 120 days while preserving their morphology, cytoarchitecture and cell composition. We demonstrate integration of KiriE with optogenetic and pharmacological manipulation and modeling phenotypes related to a genetic disease. Moreover, KiriE can capture corticostriatal connectivity in assembloids following optogenetic stimulation. Thus, KiriE will enable investigation of disease and activity patterns underlying nervous system assembly.
RESUMO
Organoids and assembloids have emerged as a promising platform to model aspects of nervous system development. Longterm, minimally-invasive recordings in these multi-cellular systems are essential for developing disease models. Current technologies, such as patch-clamp, penetrating microelectrodes, planar electrode arrays and substrate-attached flexible electrodes, do not, however, allow chronic recording of organoids in suspension, which is necessary to preserve their architecture. Inspired by the art of kirigami, we developed flexible electronics that transition from a 2D pattern to a 3D basketlike configuration to accommodate the long-term culture of organoids in suspension. This platform, named kirigami electronics (KiriE), integrates with and enables chronic recording of cortical organoids while preserving morphology, cytoarchitecture, and cell composition. KiriE can be integrated with optogenetic and pharmacological stimulation and model disease. Moreover, KiriE can capture activity in cortico-striatal assembloids. Moving forward, KiriE could reveal disease phenotypes and activity patterns underlying the assembly of the nervous system.
RESUMO
Advances in tridimensional (3D) culture approaches have led to the generation of organoids that recapitulate cellular and physiological features of domains of the human nervous system. Although microelectrodes have been developed for long-term electrophysiological interfaces with neural tissue, studies of long-term interfaces between microelectrodes and free-floating organoids remain limited. In this study, we report a stretchable, soft mesh electrode system that establishes an intimate in vitro electrical interface with human neurons in 3D organoids. Our mesh is constructed with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) based electrically conductive hydrogel electrode arrays and elastomeric poly(styrene-ethylene-butylene-styrene) (SEBS) as the substrate and encapsulation materials. This mesh electrode can maintain a stable electrochemical impedance in buffer solution under 50% compressive and 50% tensile strain. We have successfully cultured pluripotent stem cell-derived human cortical organoids (hCO) on this polymeric mesh for more than 3 months and demonstrated that organoids readily integrate with the mesh. Using simultaneous stimulation and calcium imaging, we show that electrical stimulation through the mesh can elicit intensity-dependent calcium signals comparable to stimulation from a bipolar stereotrode. This platform may serve as a tool for monitoring and modulating the electrical activity of in vitro models of neuropsychiatric diseases.
Assuntos
Microeletrodos , Neurônios , Organoides , Humanos , Cálcio/metabolismo , Neurônios/fisiologia , Organoides/metabolismo , Organoides/fisiologiaRESUMO
Neurotransmitters play essential roles in regulating neural circuit dynamics both in the central nervous system as well as at the peripheral, including the gastrointestinal tract1-3. Their real-time monitoring will offer critical information for understanding neural function and diagnosing disease1-3. However, bioelectronic tools to monitor the dynamics of neurotransmitters in vivo, especially in the enteric nervous systems, are underdeveloped. This is mainly owing to the limited availability of biosensing tools that are capable of examining soft, complex and actively moving organs. Here we introduce a tissue-mimicking, stretchable, neurochemical biological interface termed NeuroString, which is prepared by laser patterning of a metal-complexed polyimide into an interconnected graphene/nanoparticle network embedded in an elastomer. NeuroString sensors allow chronic in vivo real-time, multichannel and multiplexed monoamine sensing in the brain of behaving mouse, as well as measuring serotonin dynamics in the gut without undesired stimulations and perturbing peristaltic movements. The described elastic and conformable biosensing interface has broad potential for studying the impact of neurotransmitters on gut microbes, brain-gut communication and may ultimately be extended to biomolecular sensing in other soft organs across the body.
Assuntos
Encéfalo , Sistema Nervoso Entérico , Trato Gastrointestinal , Neurotransmissores , Animais , Técnicas Biossensoriais , Encéfalo/metabolismo , Eixo Encéfalo-Intestino , Elastômeros , Sistema Nervoso Entérico/metabolismo , Trato Gastrointestinal/inervação , Trato Gastrointestinal/fisiologia , Grafite , Lasers , Camundongos , Nanopartículas , Neurotransmissores/análise , Serotonina/análiseRESUMO
Human pluripotent stem cells have emerged as a promising in vitro model system for studying the brain. Two-dimensional and three-dimensional cell culture paradigms have provided valuable insights into the pathogenesis of neuropsychiatric disorders, but they remain limited in their capacity to model certain features of human neural development. Specifically, current models do not efficiently incorporate extracellular matrix-derived biochemical and biophysical cues, facilitate multicellular spatio-temporal patterning, or achieve advanced functional maturation. Engineered biomaterials have the capacity to create increasingly biomimetic neural microenvironments, yet further refinement is needed before these approaches are widely implemented. This Review therefore highlights how continued progression and increased integration of engineered biomaterials may be well poised to address intractable challenges in recapitulating human neural development.
Assuntos
Materiais Biocompatíveis/administração & dosagem , Encéfalo/efeitos dos fármacos , Encéfalo/crescimento & desenvolvimento , Células-Tronco Neurais/efeitos dos fármacos , Neurogênese/efeitos dos fármacos , Animais , Materiais Biocompatíveis/metabolismo , Encéfalo/metabolismo , Diferenciação Celular/efeitos dos fármacos , Diferenciação Celular/fisiologia , Matriz Extracelular/efeitos dos fármacos , Matriz Extracelular/metabolismo , Humanos , Células-Tronco Neurais/metabolismo , Neurogênese/fisiologia , Células-Tronco Pluripotentes/efeitos dos fármacos , Células-Tronco Pluripotentes/metabolismoRESUMO
Both substrate stiffness and surface topography regulate cell behavior through mechanotransduction signaling pathways. Such intertwined effects suggest that engineered surface topographies might substitute or cancel the effects of substrate stiffness in biomedical applications. However, the mechanisms by which cells recognize topographical features are not fully understood. Here we demonstrate that the presence of nanotopography drastically alters cell behavior such that neurons and stem cells cultured on rigid glass substrates behave as if they were on soft hydrogels. With atomic force microscopy, we show that rigid nanotopography resembles the effects of soft hydrogels in reducing cell stiffness and membrane tension. Further, we reveal that nanotopography reduces focal adhesions and cell stiffness by enhancing the endocytosis and the subsequent removal of integrin receptors. This mechanistic understanding will support the rational design of nanotopography that directs cells on rigid materials to behave as if they were on soft ones.
Assuntos
Adesões Focais , Mecanotransdução Celular , Endocitose , Integrinas , Células-TroncoRESUMO
Advances in protein engineering have enabled the production of self-assembled protein crystals within living cells. Our recent publication demonstrates the production of ftn-PAK4, which is a ferritin-containing crystal that can mineralize iron and become magnetic when isolated. We have developed an optimized protocol for the production and isolation of PAK4-based crystals. The crystals are first grown in low-passage HEK293T cells, released using a lysis buffer containing NP-40 and DNase, and collected under careful centrifugation conditions. Our protocol maximizes the purity and yield of crystals and is quick and straightforward.
RESUMO
Magnetogenetics is a new field that leverages genetically encoded proteins and protein assemblies that are sensitive to magnetic fields to study and manipulate cell behavior. Theoretical studies show that many proposed magnetogenetic proteins do not contain enough iron to generate substantial magnetic forces. Here, we have engineered a genetically encoded ferritin-containing protein crystal that grows inside mammalian cells. Each of these crystals contains more than 10 million ferritin subunits and is capable of mineralizing substantial amounts of iron. When isolated from cells and loaded with iron in vitro, these crystals generate magnetic forces that are 9 orders of magnitude larger than the forces from the single ferritin cages used in previous studies. These protein crystals are attracted to an applied magnetic field and move toward magnets even when internalized into cells. While additional studies are needed to realize the full potential of magnetogenetics, these results demonstrate the feasibility of engineering protein assemblies for magnetic sensing.
Assuntos
Ferritinas/química , Imãs/química , Animais , Cristalização , Ferritinas/genética , Células HEK293 , Humanos , Ferro/química , Campos Magnéticos , Camundongos , Engenharia de Proteínas , Células RAW 264.7RESUMO
Organoids are 3D cell culture systems that mimic some of the structural and functional characteristics of an organ. Organoid cultures provide the opportunity to study organ-level biology in models that mimic human physiology more closely than 2D cell culture systems or non-primate animal models. Many organoid cultures rely on decellularized extracellular matrices as scaffolds, which are often poorly chemically defined and allow only limited tunability and reproducibility. By contrast, the biochemical and biophysical properties of engineered matrices can be tuned and optimized to support the development and maturation of organoid cultures. In this Review, we highlight how key cell-matrix interactions guiding stem-cell decisions can inform the design of biomaterials for the reproducible generation and control of organoid cultures. We survey natural, synthetic and protein-engineered hydrogels for their applicability to different organoid systems and discuss biochemical and mechanical material properties relevant for organoid formation. Finally, dynamic and cell-responsive material systems are investigated for their future use in organoid research.
RESUMO
Multielectrode arrays (MEAs) are essential tools in neural and cardiac research as they provide a means for noninvasive, multiplexed recording of extracellular field potentials with high temporal resolution. To date, the mechanical properties of the electrode material, e.g., its Young's modulus, have not been taken into consideration in most MEA designs leaving hard materials as the default choice due to their established fabrication processes. However, the cell-electrode interface is known to significantly affect some aspects of the cell's behavior. In this paper, we describe the fabrication of a soft 3D micropillar electrode array. Using this array, we proceed to successfully record action potentials from monolayer cell cultures. Specifically, our conductive hydrogel micropillar electrode showed improved signal amplitude and signal-to-noise ratio, compared with conventional hard iridium oxide micropillar electrodes of the same diameter. Taken together, our fabricated soft micropillar electrode array will provide a tissue-like Young's modulus and thus a relevant mechanical microenvironment to fundamental cardiac and neural studies.
Assuntos
Estimulação Elétrica/instrumentação , Desenho de Equipamento/instrumentação , Potenciais de Ação/fisiologia , Animais , Técnicas de Cultura de Células , Módulo de Elasticidade , Condutividade Elétrica , Fenômenos Eletrofisiológicos/fisiologia , Desenho de Equipamento/métodos , Hidrogéis/química , Hidrogéis/metabolismo , Irídio , Camundongos , Microeletrodos , Miócitos Cardíacos/fisiologia , Neurônios/fisiologia , Razão Sinal-RuídoRESUMO
Chemists have long preferred the Si(111) surface for chemical functionalization, as a simple aqueous etch can be used to produce ideal, atomically flat H/Si(111) surfaces for subsequent reactions. In contrast, industry-standard etches produce rough H/Si(100) surfaces terminated by nanohillocks. The recent discovery of an aqueous etch that produces morphologically controlled H/Si(100) surfaces with a near atomically flat or "half-flat" morphology challenges the assumption that Si(111) is an inherently preferable starting point for chemical functionalization. This study shows that alkyl functionalization of morphologically controlled, "half-flat" Si(100) surfaces by terminal alkenes produces dense, tightly packed monolayers that are essentially identical to those on atomically flat Si(111). The striking similarity between the infrared spectra on these two surfaces - in terms of absolute absorbance, line shape and position, and polarization dependence - strongly suggests that alkyl monolayers on morphologically controlled Si(111) and Si(100) have essentially identical structures. The principle difference between the two surfaces is the amount of residual H at the Si/organic interface, a difference that is dictated by the structure of the Si(100) surface. Alkyl monolayers on morphologically controlled Si(111) and Si(100) surfaces were shown to be equally resistant to harsh oxidants. As a result, there appears to be no chemical reason to prefer one surface over the other, at least for functionalization with terminal alkenes.