Facile post modification synthesis of copper-doped mesoporous bioactive glass with high antibacterial performance to fight bone infection.

Successful treatment of infected bone defects caused by multi-drug resistant bacteria (MDR) has become a major clinical challenge, stressing the urgent need for effective antibacterial bone graft substitutes. Mesoporous bioactive glass nanoparticles (MBGNs), a rapidly emerging class of nanoscale biomaterials, offer specific advantages for the development of biomaterials to treat bone infection due to endowed antibacterial features. Herein, we propose a facile post-modification sol-gel strategy to synthesize effective antibacterial MBGNs doped with copper ions (Cu-PMMBGNs). In this strategy, amine functional groups as chelating agents were introduced to premade mesoporous silica nanoparticles (MSNs) which further facilitate the incorporation of high content of calcium (∼17 mol%) and copper ions (∼8 mol%) without compromising nanoparticle shape, mesoporosity, and homogeneity. The resulting nanoparticles were degradable and showed rapidly induce abundant deposition of apatite crystals on their surface upon soaking in simulated body fluids (SBF) after 3 days. Cu-PMMBGNs exhibited a dose-dependent inhibitory effect on Methicillin-resistant Staphylococcus aureus (MRSA) bacteria, which are common pathogens causing severe bone infections. Most importantly, the nanoparticles containing 5 mol% copper ions at concentrations of 500 and 1000 µg.mL-1 showed highly effective antibacterial performance as reflected by a 99.9 % reduction of bacterial viability. Nanoparticles at a concentration of 500 µg.mL-1 showed no significant cytotoxicity toward preosteoblast cells (∼85-89 % cell viability) compared to the control group. In addition, the nanoscale properties of synthesized Cu-PMMBGNs (∼100 nm in size) facilitated their internalization into preosteoblast cells, which highlights their potential as intracellular carriers in combating intracellular bacteria. Therefore, these copper-doped nanoparticles hold strong promise for use as an antibacterial component in antibacterial bone substitutes such as hydrogels, nanocomposites, and coatings.

CrOx-Mediated Performance Enhancement of Ni/NiO-Mg:SrTiO3 in Photocatalytic Water Splitting.

By photodeposition of CrOx on SrTiO3-based semiconductors doped with aliovalent Mg(II) and functionalized with Ni/NiOx catalytic nanoparticles (economically significantly more viable than commonly used Rh catalysts), an increase in apparent quantum yield (AQYs) from ∼10 to 26% in overall water splitting was obtained. More importantly, deposition of CrOx also significantly enhances the stability of Ni/NiO nanoparticles in the production of hydrogen, allowing sustained operation, even in intermittent cycles of illumination. In situ elemental analysis of the water constituents during or after photocatalysis by inductively coupled plasma mass spectrometry/optical emission spectrometry shows that after CrOx deposition, dissolution of Ni ions from Ni/NiOx-Mg:SrTiO3 is significantly suppressed, in agreement with the stabilizing effect observed, when both Mg dopant and CrOx are present. State-of-the-art electron microscopy and energy-dispersive X-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS) analyses demonstrate that upon preparation, CrOx is photodeposited in the vicinity of several, but not all, Ni/NiOx particles. This implies the formation of a Ni-Cr mixed metal oxide, which is highly effective in water reduction. Inhomogeneities in the interfacial contact, evident from differences in contact angles between Ni/NiOx particles and the Mg:SrTiO3 semiconductor, likely affect the probability of reduction of Cr(VI) species during synthesis by photodeposition, explaining the observed inhomogeneity in the spatial CrOx distribution. Furthermore, by comparison with undoped SrTiO3, Mg-doping appears essential to provide such favorable interfacial contact and to establish the beneficial effect of CrOx. This study suggests that the performance of semiconductors can be significantly improved if inhomogeneities in interfacial contact between semiconductors and highly effective catalytic nanoparticles can be resolved by (surface) doping and improved synthesis protocols.

Enhanced Cycling and Rate Capability by Epitaxially Matched Conductive Cubic TiO Coating on LiCoO2 Cathode Films.

Layered lithium transition-metal oxides, such as LiCoO2 and its doped and lithium-rich analogues, have become the most attractive cathode material for current lithium-ion batteries due to their excellent power and energy densities. However, parasitic reactions at the cathode-electrolyte interface, such as metal-ion dissolution and electrolyte degradation, instigate major safety and performance issues. Although metal oxide coatings can enhance the chemical and structural stability, their insulating nature and lattice mismatch with the adjacent cathode material can act as a physical barrier for ion transport, which increases the charge-transfer resistance across the interface and impedes cell performance at high rates. Here, epitaxial engineering is applied to stabilize a cubic (100)-oriented TiO layer on top of single (104)-oriented LiCoO2 thin films to study the effect of a conductive coating on the electrochemical performance. Lattice matching between the (104) LiCoO2 surface facets and the (100) TiO plane enables the formation of the titanium mono-oxide phase, which dramatically enhances the cycling stability as well as the rate capability of LiCoO2. This cubic TiO coating enhances the preservation of the phase and structural stability across the (104) LiCoO2 surface. The results suggest a more stable Co3+ oxidation state, which not only limits the cobalt-ion dissolution into the electrolyte but also suppresses the catalytic degradation of the liquid electrolyte. Furthermore, the high c-rate performance combined with high Columbic efficiency indicates that interstitial sites in the cubic TiO lattice offer facile pathways for fast lithium-ion transport.

Controlled pharmacokinetic anti-cancer drug concentration profiles lead to growth inhibition of colorectal cancer cells in a microfluidic device.

We present a microfluidic device to expose cancer cells to a dynamic, in vivo-like concentration profile of a drug, and quantify efficacy on-chip. About 30% of cancer patients receive drug therapy. In conventional cell culture experiments drug efficacy is tested under static concentrations, e.g. 1 µM for 48 hours, whereas in vivo, drug concentration follows a pharmacokinetic profile with an initial peak and a decline over time. With the rise of microfluidic cell culture models, including organs-on-chips, there are opportunities to more realistically mimic in vivo-like concentrations. Our microfluidic device contains a cell culture chamber and a drug-dosing channel separated by a transparent membrane, to allow for shear stress-free drug exposure and label-free growth quantification. Dynamic drug concentration profiles in the cell culture chamber were controlled by continuously flowing controlled concentrations of drug in the dosing channel. The control over drug concentrations in the cell culture chambers was validated with fluorescence experiments and numerical simulations. Exposure of HCT116 colorectal cancer cells to static concentrations of the clinically used drug oxaliplatin resulted in a sensible dose-effect curve. Dynamic, in vivo-like drug exposure also led to statistically significant lower growth compared to untreated control. Continuous exposure to the average concentration of the in vivo-like exposure seems more effective than exposure to the peak concentration (Cmax) only. We expect that our microfluidic system will improve efficacy prediction of in vitro models, including organs-on-chips, and may lead to future clinical optimization of drug administration schedules.

A case study: what is leached from mallee biochars as a function of pH?

Biochar is widely considered as a soil amendment. This study aims to investigate the leaching of macronutrients (K, Mg and Ca) and organics from biochars produced from mallee biomass (wood, leaf, bark) in a fluidised-bed pyrolyser at 500 °C. Biochars were soaked in solutions of varying pH values and shaken for a pre-set period of time ranging from 1 h to 4 weeks. The initial pH values of the leaching solutions used (3.4, 5.5, 7 and 8.5) covered the pH range of the soils in the Wheatbelt region of Western Australia (WA). For these bark, leaf and wood biochars, we can conclude that the biochars have a liming capacity for the acid soils of the WA Wheatbelt, depending on the feedstock. The maximum leachabilities and leaching kinetics of the macronutrients K, Mg and Ca depend on the pH of the solution in which biochar was soaked. Apparently, Ca, K and Mg in biomass are converted into different species upon pyrolysis, and the biomass species are critical for the extent of the leachability of macronutrients. Further, the chemical form of each nutrient retained in the biochars will dictate the kinetics as a function of soil pH. This study's GC/MS analysis of solvent extraction of the biochars showed potential toxicity due to the leaching of light organic compounds when biochars are added to soils. Furthermore, this study also showed the influence of pH on the leaching of large aromatic organics from the biochars. Apart from the pH of leaching solution, the influence of the biomass feedstock on the leaching kinetics of large aromatic organics from biochars was demonstrated. These leached aromatic organics were characterised by UV-fluorescence spectroscopy.

Using Color, Texture and Object-Based Image Analysis of Multi-Temporal Camera Data to Monitor Soil Aggregate Breakdown.

Remote sensing has shown its potential to assess soil properties and is a fast and non-destructive method for monitoring soil surface changes. In this paper, we monitor soil aggregate breakdown under natural conditions. From November 2014 to February 2015, images and weather data were collected on a daily basis from five soils susceptible to detachment (Silty Loam with various organic matter content, Loam and Sandy Loam). Three techniques that vary in image processing complexity and user interaction were tested for the ability of monitoring aggregate breakdown. Considering that the soil surface roughness causes shadow cast, the blue/red band ratio is utilized to observe the soil aggregate changes. Dealing with images with high spatial resolution, image texture entropy, which reflects the process of soil aggregate breakdown, is used. In addition, the Huang thresholding technique, which allows estimation of the image area occupied by soil aggregate, is performed. Our results show that all three techniques indicate soil aggregate breakdown over time. The shadow ratio shows a gradual change over time with no details related to weather conditions. Both the entropy and the Huang thresholding technique show variations of soil aggregate breakdown responding to weather conditions. Using data obtained with a regular camera, we found that freezing-thawing cycles are the cause of soil aggregate breakdown.

Influence of Monomer Connectivity, Network Flexibility, and Hydrophobicity on the Hydrothermal Stability of Organosilicas.

It is generally assumed that the hydrothermal stability of organically modified silica networks is promoted by high monomer connectivity, network flexibility, and the presence of hydrophobic groups in the network. In this study a range of organosilica compositions is synthesized to explore the extent to which these factors play a role in the hydrothermal dissolution of these materials. Compositions were synthesized from hexafunctional organically bridged silsesquioxanes (OR1)3Si-R-Si(OR1)3 (R = -CH2-, -C2H4-, -C6H12-, -C8H16-, -p-C6H4-; R1 = -CH3, -C2H5), tetrafunctional (OEt)2Si(CH3)-C2H4-Si(CH3)(OEt)2 and Si(OEt)4, trifunctional silsesquioxanes R'-Si(OMe)3 (R'=CH3, n-C3H7, cyclo-C6H11, phenyl), and bifunctional Si(i-C3H7)2(OMe)2. The bond strain, connectivity and hydroxyl concentration of all networks were estimated using 29Si cross-polarized magic angle spinning nuclear magnetic resonance and Fourier-transform infrared spectroscopy. The hydrophilicity was characterized by monitoring the water uptake of the materials in moisture treatments with thermogravimetric analysis, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The resistance of each network against hydrothermal dissolution in a water/1,5-pentanediol mixture at 80 °C and pH 1, 7, and 13 was analyzed with inductively coupled plasma optical emission spectroscopy and X-ray fluorescence. Bond strain appears to significantly increase the tendency to dissolve under hydrothermal conditions. The stabilizing influences of increased connectivity and hydrophobicity were found to be weak.

Organic compounds leached from fast pyrolysis mallee leaf and bark biochars.

Characterization of organic compounds leached from biochars is essential in assessing the possible toxicity of the biochar to the soils' biota. In this study the nature of the leached organic compounds from Mallee biochars, produced from pyrolysis of Mallee leaf and bark in a fluidised-bed pyrolyser at 400 and 580°C was investigated. Light bio-oil compounds and aromatic organic compounds were investigated. The 'bio-oil like' light compounds from leaf and bark biochars 'surfaces were obtained after leaching the chars with a solvent, suitable to dissolve the respective bio-oils. GC/MS was implemented to investigate the leachates. Phenolics, which are potentially harmful toxins, were detected and their concentration shown to be dependent on the char's origin and the char production temperature. Further, to simulate biochars amendment to soils, the chars were leached with water. The water-leached aromatic compounds from leaf and bark biochars were characterized using UV-fluorescence spectroscopy. Those results suggested that biochars contain leachable compounds of which the nature and amount is dependent on the biomass feedstock, pyrolysis temperature and leaching time.

Understanding the stability of pyrolysis tars from biomass in a view point of free radicals.

Fast pyrolysis of biomass has attracted increasing attention worldwide to produce bio-tars that can be upgraded into liquid fuels and chemicals. However, the bio-tars are usually poor in quality and stability and are difficult to be upgraded. To better understand the nature of the bio-tars, this work reveals radical concentration of tars derived from pyrolysis of two kinds of biomass. The tars were obtained by condensing the pyrolysis volatiles in 3s. It shows that the tars contain large amounts of radicals, at a level of 10(16)spins/g, and are able to generate more radicals at temperatures of 573K or higher, reaching a level of 10(19)spins/g at 673K in less than 30min. The radical generation in the tar samples is attributed to the formation of THF insoluble matters (coke), which also contain radicals. The radical concentrations of the aqueous liquids obtained in pyrolysis are also studied.

Esterification of bio-oil from mallee (Eucalyptus loxophleba ssp. gratiae) leaves with a solid acid catalyst: Conversion of the cyclic ether and terpenoids into hydrocarbons.

Bio-oil from pyrolysis of mallee (Eucalyptus loxophleba ssp. gratiae) leaves differs from that obtained with wood by its content of cyclic ethers, terpenoids and N-containing organic compounds. Upgrading of the leaf bio-oil in methanol with a solid acid catalyst was investigated and it was found that the N-containing organics in the bio-oil lead to deactivation of the catalyst in the initial stage of exposure and have to be removed via employing high catalyst loading to allow the occurrence of other acid-catalysed reactions. Eucalyptol, the main cyclic ether in the bio-oil, could be converted into the aromatic hydrocarbon, p-cymene, through a series of intermediates including α-terpineol, terpinolene, and α-terpinene. Various steps such as ring-opening, dehydration, isomerisation, and aromatization were involved in the conversion of eucalyptol. The terpenoids in bio-oil could also be converted into aromatic hydrocarbons that can serve as starting materials for the synthesis of fine chemicals, via the similar processes.

Acid-catalyzed conversion of xylose in methanol-rich medium as part of biorefinery.

Acid treatments of xylose have been performed in a methanol/water mixture to investigate the reaction pathways of xylose during bio-oil esterification. Xylose was mainly converted into methyl xylosides with negligible humins formed below 130 °C. However, humins formation became significant with the dehydration of xylose to furfural and 2-(dimethoxymethyl)furan (DOF) at elevated temperatures. The conversion of xylose to methyl xylosides protected the C1 hydroxyl group of xylose, which stabilized xylose and suppressed the formation of sugar oligomers and polymerization reactions. In comparison, the conversion of furfural to DOF protected the carbonyl group of furfural. However, the protection did not remarkably suppress the polymerization of furfural at high temperatures because of the shift of the reaction equilibrium from DOF to furfural with a prolonged residence time. In addition, the acid treatment of furfural produced methyl levulinate in methanol and levulinic acid in water, which was catalyzed by formic acid.

Reaction pathways of glucose during esterification: effects of reaction parameters on the formation of humin type polymers.

The formation of humin-type polymers and other products during exposure of glucose to methanol/water mixtures with methanol/water mass ratios from 10 to 0.22 in the presence of the acid catalyst Amberlyst 70 was investigated. In water-rich medium (methanol/water mass ratio: 0.22), dehydration of glucose produced 5-(hydroxymethyl)furfural (HMF), furfural, and substantial amounts of polymer. In methanol-rich medium (methanol/water mass ratio: 10), the hydroxyl and carbonyl groups of glucose, HMF or furfural were protected via etherification and acetalisation. These protections stabilized these reactive compounds and significantly lowered the polymer formation (1.43% of the glucose loaded). The polymerization of glucose and HMF was also favored at high temperatures and long residence times. Conversely, high catalyst dosage mainly accelerated the conversion of glucose to methyl levulinate. Thus, the polymerization of glucose and HMF can be suppressed in methanol/water mixtures with high methanol ratios, at low temperatures and short residence times.