Crystalline Nanoflowers Derived from the Intramolecular Cyclization-Induced Self-Assembly of an Amorphous Poly(amic acid) at High Solid Content.

The investigation of the amorphous to crystalline transformation and the corresponding influence on the self-assembly behavior of amphiphilic polymers are of significant interest in this field. Herein, we propose the concept of intramolecular cyclization-induced self-assembly (ICISA) to prepare crystalline nanoflowers at a high solid content of 15% on the basis of the amorphous to crystalline transformation of poly(amic acid) (PAA). Taking advantage of the reactive property of the PAA, rigid and crystalline polyimide (PI) segments are introduced to the backbone of the PAA to give P(AA-stat-I) induced by the intramolecular cyclization reaction upon thermal treatment, leading to the in situ formation of crystalline nanoflowers. Revealing the formation mechanism of the nanoflowers, we found that the nanosheets are formed at the early stage and then stacked to form the nanoflowers at high concentrations. The relationship between the degree of imidization and incubation temperature is quantitatively analyzed, and the effects of temperature on the morphology, degree of imidization, and crystallinity of the assemblies are also investigated. Furthermore, computer simulations demonstrate the optimized temperature of ICISA of 160 °C, which ensures the match between the intramolecular cyclization reaction rate, the self-assembly process, and the lowest energy state of the self-assembly system, resulting in the formation of nanoflowers with high crystallinity. Overall, a facile one-step strategy is proposed to prepare crystalline nanoflowers based on the in situ thermally triggered intramolecular cyclization reaction of a PAA, which may bring fresh insights into the dynamic amorphous to the crystalline transformation of polymers.

Observation of Fast Low-Temperature Oxygen Ion Conduction in CeO2/ß"-Al2O3 Heterostructure.

Semiconductor ion fuel cells (SIFCs) have demonstrated impressive ionic conductivity and efficient power generation at temperatures below 600 °C. However, the lack of understanding of the ionic conduction mechanisms associated with composite electrolytes has impeded the advancement of SIFCs toward lower operating temperatures. In this study, a CeO2/ß″-Al2O3 heterostructure electrolyte is introduced, incorporating ß″-Al2O3 and leveraging the local electric field (LEF) as well as the manipulation of the melting point temperature of carbonate/hydroxide (C/H) by Na+ and Mg2+ from ß″-Al2O3. This design successfully maintains swift interfacial conduction of oxygen ions at 350 °C. Consequently, the fuel cell device achieved an exceptional ionic conductivity of 0.019 S/cm and a power output of 85.9 mW/cm2 at 350 °C. The system attained a peak power density of 1 W/cm2 with an ultra-high ionic conductivity of 0.197 S/cm at 550 °C. The results indicate that through engineering the LEF and incorporating the lower melting point C/H, there approach effectively observed oxygen ion transport at low temperatures (350 °C), effectively overcoming the issue of cell failure at temperatures below 419 °C. This study presents a promising methodology for further developing high-performance semiconductor ion fuel cells in the low temperature range of 300-600 °C.

Idebenone Antagonizes P53-Mediated Neuronal Oxidative Stress Injury by Regulating CD38-SIRT3 Protein Level.

Idebenone, an antioxidant used in treating oxidative damage-related diseases, has unclear neuroprotective mechanisms. Oxidative stress affects cell and mitochondrial membranes, altering Adp-ribosyl cyclase (CD38) and Silent message regulator 3 (SIRT3) protein expression and possibly impacting SIRT3's ability to deacetylate Tumor protein p53 (P53). This study explores the relationship between CD38, SIRT3, and P53 in H2O2-injured HT22 cells treated with Idebenone. Apoptosis was detected using flow cytometry and terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) staining after determining appropriate H2O2 and Idebenone concentrations.In this study, Idebenone was found to reduce apoptosis and decrease P53 and Caspase3 expression in H2O2-injured HT22 cells by detecting apoptosis-related protein expression. Through bioinformatics methods, CD38 was identified as the target of Idebenone, and it further demonstrated that Idebenone decreased the expression of CD38 and increased the level of SIRT3. An increased NAD+/NADH ratio was detected, suggesting Idebenone induces SIRT3 expression and protects HT22 cells by decreasing apoptosis-related proteins. Knocking down SIRT3 downregulated acetylated P53 (P53Ac), indicating SIRT3's importance in P53 deacetylation.These results supported that CD38 was used as a target of Idebenone to up-regulate SIRT3 to deacetylate activated P53, thereby protecting HT22 cells from oxidative stress injury. Thus, Idebenone is a drug that may show great potential in protecting against reactive oxygen species (ROS) induced diseases such as Parkinson's disease, and Alzheimer's disease. And it might be able to compensate for some of the defects associated with CD38-related diseases.

Self-Assembled MXene@Fluorographene Hybrid for High Dielectric Constant and Low Loss Ferroelectric Polymer Composite Films.

Modern electrical applications urgently need flexible polymer films with a high dielectric constant (εr) and low loss. Recently, the MXene-filled percolative composite has emerged as a potential material choice because of the promised high εr. Nevertheless, the typically accompanied high dielectric loss hinders its applications. Herein, a facile and effective surface modification strategy of cladding Ti3C2Tx MXene (T = F or O; FMX) with fluorographene (FG) via self-assembly is proposed. The obtained FMX@FG hybrid yields high εr (up to 108 @1 kHz) and low loss (loss tangent tan δ = 1.16 @ 1 kHz) in a ferroelectric polymer composite at a low loading level (the equivalent of 1.5 wt % FMX), which is superior to its counterparts in our work (e.g., FMX: εr = 104, tan δ = 10.71) and other studies. It is found that the FG layer outside FMX plays a critical role in both the high dielectric constant and low loss from experimental characterizations and finite element simulations. For one thing, FG with a high F/C ratio would induce a favorable structure of high ß-phase crystallinity, extensive microcapacitor networks, and abundant interfacial dipoles in polymer composites that account for the high εr. For another, FG, as a highly insulating layer, can inhibit the formation of conductive networks and inter-FMX electron tunneling, which is responsible for conduction loss. The results demonstrate the potential of a self-assembled FMX@FG hybrid for high εr and low loss polymer composite films and offer a new strategy for designing advanced polymer composite dielectrics.

Gegen Qinlian tablets delay Alzheimer's disease progression via inhibiting glial neuroinflammation and remodeling gut microbiota homeostasis.

BACKGROUND: Current therapeutic agents for AD have limited efficacy and often induce undesirable side effects. Gegen Qinlian tablets (GGQLT) are a well-known clearingheat formula used in clinical treatment of inflammatory diseases. Based on traditional Chinese medicine (TCM) theory, the strategy of clearing-heat is then compatible with the treatment of AD. However, it remains unknown whether GGQLT can exert neuroprotective effects and alleviate neuroinflammation in AD. PURPOSE: This study aimed to evaluate the anti-AD effects of GGQLT and to decipher its intricate mechanism using integrative analyses of network pharmacology, transcriptomic RNA sequencing, and gut microbiota. METHODS: The ingredients of GGQLT were analyzed using HPLC-ESI-Q/TOF-MS. The AD model was established by bilateral injection of Aß1-42 into the intracerebroventricular space of rats. The Morris water maze was used to evaluate the cognitive function of the AD rats. The long-term toxicity of GGQLT in rats was assessed by monitoring their body weights and pathological alterations in the liver and kidney. Reactive astrocytes and microglia were assessed by immunohistochemistry by labeling GFAP and Iba-1. The levels of inflammatory cytokines in the hippocampus were evaluated using ELISA kits, RT-PCR, and Western blot, respectively. The potential anti-AD mechanism was predicted by analyses of RNA-sequencing and network pharmacology. Western blot and immunohistochemistry were utilized to detect the phosphorylation levels of IκBα, NF-κB p65, p38, ERK and JNK. The richness and composition of gut bacterial and fungal microflora were investigated via 16S rRNA and ITS sequencing. RESULTS: Typical ingredients of GGQLT were identified using HPLC-ESI-Q/TOF-MS. GGQLT significantly improved the cognitive function of AD rats by suppressing the activation of microglia and astrocytes, improving glial morphology, and reducing the neuroinflammatory reactions in the hippocampus. RNA-sequencing, network and experimental pharmacological studies demonstrated that GGQLT inhibited the activation of NF-κB/MAPK signaling pathways in the hippocampus. GGQLT could also restore abnormal gut bacterial and fungal homeostasis and no longer-term toxicity of GGQLT was observed. CONCLUSIONS: Our findings, for the first time, demonstrate GGQLT exhibit anti-AD effects and is worthy of further exploration and development.

A sustainable and efficient strategy for bioconverting naringin to L-rhamnose, 2R-naringenin, and kaempferol.

The development of a sustainable and efficient bioconversion strategy is crucial for the full-component utilization of naringin. In this study, an engineering Pichia pastoris co-culture system was developed to produce L-rhamnose and 2S/2R-naringenin. By optimizing transformation conditions, the co-culture system could completely convert naringin while fully consuming glucose. The production of 2S/2R-naringenin reached 59.5 mM with a molar conversion of 99.2%, and L-rhamnose reached 59.1 mM with a molar conversion of 98.5%. In addition, an engineering Escherichia coli co-culture system was developed to produce 2R-naringenin and kaempferol from 2S/2R-naringenin. Maximal kaempferol production reached 1050 mg/L with a corresponding molar conversion of 99.0%, and 996 mg/L 2R-naringenin was accumulated. Finally, a total of 17.4 g 2R-naringenin, 18.0 g kaempferol, and 26.1 g L-rhamnose were prepared from 100 g naringin. Thus, this study provides a novel strategy for the production of value-added compounds from naringin with an environmentally safe process.

Solid Electrolyte Interphase Recombination on Graphene Nanoribbons for Lithium Anode.

The practical application of lithium metal batteries is hindered by the lithium dendrite issue, which is seriously affected by the composition and structure of the solid electrolyte interphase (SEI). Modifying the SEI can regulate lithium dendrite formation and growth. Here, we experimentally realize a Li protective layer of LiTFSI-ether electrolyte induced a natural SEI grafted on graphene nanoribbons (SEI@GNRs) via their in situ reactions. The experimental results and theoretical calculations uncover that the 3D structure of SEI@GNRs can reduce the local current density and Li+ flux. The natural SEI in SEI@GNRs, especially the rich inorganic species of LiF, Li3N, and Li2S, decreases the Li+ nucleation overpotential, makes Li+ ion deposition and nucleation uniform, and isolates electron transport. Their synergetic effect suppresses Li dendrite formation and growth, increasing the electrochemical performance of lithium metal batteries. The design strategy is beneficial for the development of lithium metal batteries.

Facile Graphene Oxide Modification Method via Hydroxyl-yne Click Reaction for Ultrasensitive and Ultrawide Monitoring Pressure Sensors.

Enhancing the durability and functionality of existing materials through sustainable pathways and appropriate structural design represents a time- and cost-effective strategy for the development of advanced wearable devices. Herein, a facile graphene oxide (GO) modification method via the hydroxyl-yne click reaction is present for the first time. By the click coupling between propiolate esters and hydroxyl groups on GO under mild conditions, various functional molecules are successfully grafted onto the GO. The modified GO is characterized by FTIR, XRD, TGA, XPS, and contact angle, proving significantly improved dispersibility in various solvents. Besides the high efficiency, high selectivity, and mild reaction conditions, this method is highly practical and accessible, avoiding the need for prefunctionalizations, metals, or toxic reagents. Subsequently, a rGO-PDMS sponge-based piezoresistive sensor developed by modified GO-P2 as the sensitive material exhibits impressive performance: high sensitivity (335 kPa-1, 0.8-150 kPa), wide linear range (>500 kPa), low detection limit (0.8 kPa), and long-lasting durability (>5000 cycles). Various practical applications have been demonstrated, including body joint movement recognition and real-time monitoring of subtle movements. These results prove the practicality of the methodology and make the rGO-PDMS sponge-based pressure sensor a real candidate for a wide array of wearable applications.

Evaluation of tumor microvasculature with 3D ultrasound localization microscopy based on 2D matrix array.

OBJECTIVE: Evaluation of tumor microvascular morphology is of great significance in tumor diagnosis, therapeutic effect prediction, and surgical planning. Recently, two-dimensional ultrasound localization microscopy (2DULM) has demonstrated its superiority in the field of microvascular imaging. However, it suffers from planar dependence and is unintuitive. We propose a novel three-dimensional ultrasound localization microscopy (3DULM) to avoid these limitations. METHODS: We investigated 3DULM based on a 2D array for tumor microvascular imaging. After intravenous injection of contrast agents, all elements of the 2D array transmit and receive signals to ensure a high and stable frame rate. Microbubble signal extraction, filtering, positioning, tracking, and other processing were used to obtain a 3D vascular map, flow velocity, and flow direction. To verify the effectiveness of 3DULM, it was validated on double helix tubes and rabbit VX2 tumors. Cisplatin was used to verify the ability of 3DULM to detect microvascular changes during tumor treatment. RESULTS: In vitro, the sizes measured by 3DULM at 3 mm and 13 mm were 178 µ m and 182 µ m , respectively. In the rabbit tumors, we acquired 9000 volumes to reveal vessels about 30 µ m in diameter, which surpasses the diffraction limit of ultrasound in traditional ultrasound imaging, and the results matched with micro-angiography. In addition, there were significant changes in vascular density and curvature between the treatment and control groups. CONCLUSIONS: The effectiveness of 3DULM was verified in vitro and in vivo. Hence, 3DULM may have potential applications in tumor diagnosis, tumor treatment evaluation, surgical protocol guidance, and cardiovascular disease. CLINICAL RELEVANCE STATEMENT: 3D ultrasound localization microscopy is highly sensitive to microvascular changes; thus, it has clinical potential for tumor diagnosis and treatment evaluation. KEY POINTS: • 3D ultrasound localization microscopy is demonstrated on double helix tubes and rabbit VX2 tumors. • 3D ultrasound localization microscopy can reveal vessels about 30 µ m in diameter-far smaller than traditional ultrasound. • This form of imaging has potential applications in tumor diagnosis, tumor treatment evaluation, surgical protocol guidance, and cardiovascular disease.

Skin-Conformable Flexible and Stretchable Ultrasound Transducer for Wearable Imaging.

Ultrasound imaging offers a noninvasive, radiation-free method for visualizing internal tissues and organs, with deep penetration capabilities. This has established it as a crucial tool for physicians in diagnosing internal tissue pathologies and monitoring human conditions. Nonetheless, conventional ultrasound probes are often characterized by their rigidity and bulkiness. Designing a transducer that can seamlessly adapt to the contours and dynamics of soft, curved human skin presents significant technical hurdles. We present a novel flexible and stretchable ultrasound transducer (FSUT) designed for adaptability to large-curvature surfaces while preserving superior imaging quality. Central to this breakthrough is the innovative use of screen-printed silver nanowires (AgNWs) coupled with a composite elastic substrate, together ensuring robust and stable electrical and mechanical connections. Standard tensile and fatigue tests verify its durability. The mechanical, electrical, and acoustic properties of FSUTs are characterized using standard methods, with large tensile strains (≥110%), high flexibility ( R ≥ 1.4 mm), and lightweight ( ≤ 1.58 g) to meet the needs of wearable devices. Center frequency and -6-dB bandwidth are approximately 5.3 MHz and 66.47%, respectively. Images of the commercial anechoic cyst phantom yielded an axial and lateral resolution (depths of 10-70 mm) of approximately 0.31 and 0.46, and 0.34 and 0.84 mm, respectively. The complex curved surface imaging capabilities of FSUT were tested on agar-gelatin-based breast cyst phantoms under different curvatures. Finally, ultrasound images of the thyroid, brachial, and carotid arteries were also obtained from volunteer wearing FSUT.

Zincophilic Metal-Organic-Framework Interface Mitigating Dendrite Growth for Highly Reversible Zinc Metal Batteries.

Aqueous Zn-ion batteries are the ideal candidate for large-scale energy storage systems owing to their high safety and low cost. However, the uncontrolled deposition and parasitic reaction of Zn metal anode hinder their commercial application. Here, the 2D metal-organic-framework (MOF) nanoflakes covered on the surface of Zn are proposed to enable dendrite-free for long lifespan Zn metal batteries. The MOF can facilitate the desolvation process to accelerate reaction kinetic due to its special channel structure. The abundant zincopilicity sites of MOF can realize the homogenous Zn2+ deposition. Consequently, their synergetic effect makes the MOF protected Zn anode good electrochemical performance with a long cycle life of 1400 h at 1 mA cm-2 and a high depth of discharge of 30 mAh cm-2 (DOD ≈ 54%) continued for over 700 h. This work provides a novel strategy for high-performance rechargeable Zn-ion batteries.

Efficient and Economic Utilization of Cellobiose for Glycosylation Modification by Regulating Carbon Source Supply and Metabolic Pathway In Vivo.

Glycosylation, one of the most common and significant modifications in nature, has prompted the development of a cellobiose phosphorolysis route for glycosylation in vivo. However, the process of glycosylation is hampered by the notably low conversion rate of cellobiose. In this work, regulation of the carbon source supply by changing the ratio of glucose to cellobiose improved the conversion rate of cellobiose, resulting in enhancing the efficiency of glycosylation and the production of vitexin. Moreover, three genes (pgm, agp, and ushA) involved in the degradation of UDP-glucose were knocked out to relieve the degradation and diversion of the cellobiose phosphorolysis route. Finally, through the optimization of conversion conditions, we observed a continuous enhancement in cellobiose conversion rate and vitexin production in BL21ΔushAΔagp-TcCGT-CepA, corresponding to an increased concentration of added glucose. The maximum production of vitexin reached 2228 mg/L with the addition of 2 g/L cellobiose and 6 g/L glucose, which was 312% of that in BL21-TcCGT-CepA with the addition of 2 g/L cellobiose. The conversion rate of cellobiose in BL21ΔushAΔagp-TcCGT-CepA reached 88%, which was the highest conversion rate of cellobiose to date. Therefore, this study presents a cost-effective and efficient method to enhance the conversion rate of cellobiose during the glycosylation process.

The Guidelines for the Design and Synthesis of Transition Metal Atom Doped Carbon Dots.

Atoms doping is a practical approach to modulate the physicochemical properties of carbon dots (CDs) and thus has garnered increasing attention in recent years. Compared to non-metal atoms, transition metal atoms (TMAs) possess more unoccupied orbitals and larger atomic radii. TMAs doping can significantly alter the electronic structure of CDs and bestow them with new intrinsic characteristics. TMAs-doped CDs have exhibited widespread application potential as a new class of single-atom-based nanomaterials. However, challenges remain for the successful preparation and precise design of TMAs-doped CDs. The key to successfully preparing TMA-doped CDs lies in anchoring TMAs to the carbon precursors before the reaction. Herein, taking the formation mechanism of TMAs-doped CDs as a starting point, we systematically summarized the ligands employed for synthesizing TMAs-doped CDs and proposed the synthetic strategy involving multiple ligands. Additionally, we summarize the functional properties imparted to CDs by different TMA dopants to guide the design of TMA-doped CDs with different functional characteristics. Finally, we describe the bottlenecks TMAs-doped CDs face and provide an outlook on their future development.

Quasi-Solid-State All-V2O5 Battery.

Solid-state symmetrical battery represents a promising paradigm for future battery technology. However, its development is hindered by the deficiency of high-performance bipolar electrodes and compatible solid electrolytes. Herein, a quasi-solid-state all-V2O5 battery constructed by a binder-free carbon fabric-V2O5 nanowires@graphene (CVOG) bipolar electrode and a softly cross-linked polyethylene oxide-based solid polymer electrolyte (SPE) is reported. The synergetic effect of nano-structuring of V2O5, hierarchical conductive network, and graphene wrapping endows the CVOG electrode with boosted reaction kinetics and suppressed vanadium dissolution. The cathodic and anodic reactions of CVOG are decoupled by electrochemical analysis, conceiving the feasibility of constructing all-V2O5 full battery. In manifesting the solid-state all-V2O5 battery, the robust and elastic SPE exhibits high ionic conductivity, tight/self-adaptable electrolyte-electrode contact, and a low charge-transfer barrier. The resultant solid-state full battery exhibits a high reversible capacity of 158 mAh g-1 at 0.1 C, good capacity retention of over 61% from 0.1 C to 2 C, and remarkable cycling stability of 77% capacity retention after 1000 cycles at 1 C, which surpass other solid-state symmetrical batteries. Hence, this work provides a practice of high-performance solid-state batteries with symmetrical configuration and is constructive for next-generation battery technology.

The neutrophil percentage-to-albumin ratio is associated with all-cause mortality in patients with chronic heart failure.

BACKGROUND: In this study, we evaluated the predictive utility of neutrophil percentage-to-albumin ratio (NPAR) for all-cause mortality in patients with chronic heart failure (CHF). METHODS: Patients diagnosed as CHF enrolled in this retrospective cohort study were from Beijing Chaoyang Hospital, capital medical university. Admission NPAR was calculated as neutrophil percentage divided by serum albumin. The endpoints of this study were defined as 90-day, 1-year and 2-year all-cause mortality. Multivariable Cox proportional hazard regression model was performed to confirm the association between NPAR and all-cause mortality. Receiver operating characteristics (ROC) curves were used to evaluate the ability for NPAR to predict all-cause mortality. RESULTS: The 90-day (P = 0.009), 1-year (P < 0.001) and 2-year (P < 0.001) all-cause mortality in 622 patients with CHF were increased as admission NPAR increased. Multivariable Cox regression analysis found the higher NPAR value was still independently associated with increased risk of 90-day (Group III versus Group I: HR, 95% CI: 2.21, 1.01-4.86, P trend = 0.038), 1-year (Group III versus Group I: HR, 95% CI:2.13, 1.30-3.49, P trend = 0.003), and 2-year all-cause mortality (Group III versus Group I: HR, 95% CI:2.06, 1.37-3.09, P trend = 0.001), after adjustments for several confounders. ROC curves revealed that NPAR had a better ability to predict all-cause mortality in patients with CHF, than either albumin or the neutrophil percentage alone. CONCLUSIONS: NPAR was independently correlated with 90-day, 1-year, and 2-year all-cause mortality in patients with CHF.

Revealing the extracellular function of HMGB1 N-terminal region acetylation assisted by a protein semi-synthesis approach.

HMGB1 (high-mobility group box 1) is a non-histone chromatin-associated protein that has been widely reported as a representative damage-associated molecular pattern (DAMP) and to play a pivotal role in the proinflammatory process once it is in an extracellular location. Accumulating evidence has shown that HMGB1 undergoes extensive post-translational modifications (PTMs) that actively regulate its conformation, localization, and intermolecular interactions. However, fully characterizing the functional implications of these PTMs has been challenging due to the difficulty in accessing homogeneous HMGB1 with site-specific PTMs of interest. In this study, we developed a streamlined protein semi-synthesis strategy via salicylaldehyde ester-mediated chemical ligations (Ser/Thr ligation and Cys/Pen ligation, STL/CPL). This methodology enabled us to generate a series of N-terminal region acetylated HMGB1 proteins. Further studies revealed that acetylation regulates HMGB1-heparin interaction and modulates HMGB1's stability against thrombin, representing a regulatory switch to control HMGB1's extracellular activity.

Activation of the mTOR pathway promotes neurite growth through upregulation of CD44 expression.

OBJECTIVE: To explore the intrinsic mechanism of the mammalian target of rapamycin (mTOR) pathway activation and promotion of neuronal axon growth. METHODS: Human neuroblastoma cells, SH-SY5Y, were induced with all-trans retinoic acid (ATRA; 10 µM for three days) which differentiated the cell line into a neuronal-like state. Immunohistochemical staining was used to detect the differentiation status of the neuronal-like cells. Phosphatase and tensin homolog (PTEN) RNA interference (RNAi) experiments were performed on the differentiated cells; reverse transcription-polymerase chain reaction (RT-PCR) detected transcriptional levels of PTEN following 24 h of interference. After 36 h, western blot assay was used to detect expression levels of ribosomal protein S6 kinase (pS6k) and mTOR. To downregulate the expression of PTEN and cluster of differentiation 44 (CD44), a cell-surface glycoprotein, simultaneously, PTEN siRNA and CD44 siRNA sequences were mixed in equal proportions in co-interference experiments. RT-PCR detected the transcription level of CD44, and the relationship between the CD44 and axonal growth was observed after 48 h of interference. RESULTS: Microtubule-associated protein 2 (MAP2) expression was enhanced after three days of induction in SH-SY5Y cells. RT-PCR showed the transcription level of PTEN was significantly downregulated after 24 h of PTEN knockdown. mTOR and pS6k protein expression levels were significantly upregulated after 36 h of interference. CD44 transcription levels were upregulated after PTEN gene interference. The neurite length of the cells in the experimental interference group was significantly longer than that in the control group, and the expression level of CD44 was positively correlated with neurite growth. The neurite length of the PTEN-only interference group was significantly greater than that of the co-interference and ATRA groups. CONCLUSION: Activation of the mTOR pathway promoted neurite growth through upregulation of CD44 expression, thus promoting neuronal regeneration.

Engineering Escherichia coli for efficient and economic production of C-glycosylflavonoids by deleting YhhW and regulating pH.

C-glycosylflavonoids have a number of pharmacological activities. An efficient method for the preparation of C-glycosylflavonoids is through metabolic engineering. Thus, it is important to prevent the degradation of C-glycosylflavonoids for producing C-glycosylflavonoids in the recombinant strain. In this study, two critical factors for the degradation of C-glycosylflavonoids were clarified. The quercetinase (YhhW) gene from Escherichia coli BL21(DE3) was expressed, purified, and characterized. YhhW effectively degraded quercetin 8-C-glucoside, orientin, and isoorientin, while the degradation of vitexin and isovitexin was not significant. Zn2+ can significantly reduce the degradation of C-glycosylflavonoids by inhibiting the activity of YhhW. pH was another key factor causing the degradation of C-glycosylflavonoids, and C-glycosylflavonoids were significantly degraded with pH exceeding 7.5 in vitro or in vivo. On this basis, two strategies, deleting YhhW gene from the genome of E. coli and regulating pH during the bioconversion, were developed to relieve the degradation of C-glycosylflavonoids. Finally, the total degradation rates for orientin and quercetin 8-C-glucoside decreased from 100 to 28% and 65% to 18%, respectively. The maximum yield of orientin reached 3353 mg/L with luteolin as substrate, and the maximum yield of quercetin 8-C-glucoside reached 2236 mg/L with quercetin as substrate. Therefore, the method described herein for relieving the degradation of C-glycosylflavonoids may be widely used for the biosynthesis of C-glycosylflavonoids in recombinant strains.

Genomic insights into genetic diversity and local adaptation of a dominant desert steppe feather grass, Stipa breviflora Griseb.

Investigating the genetic mechanisms of local adaptation is critical to understanding how species adapt to heterogeneous environments. In the present study, we analyzed restriction site-associated DNA sequencing (RADseq) data in order to explore genetic diversity, genetic structure, genetic differentiation, and local adaptation of Stipa breviflora. In total, 135 individual plants were sequenced and 25,786 polymorphic loci were obtained. We found low genetic diversity (He = 0.1284) within populations of S. breviflora. Four genetic clusters were identified along its distribution range. The Mantel test, partial Mantel test, and multiple matrix regression with randomization (MMRR) indicate that population differentiation was caused by both geographic distance and environmental factors. Through the FST outlier test and environmental association analysis (EAA), 113 candidate loci were identified as putatively adaptive loci. RPK2 and CPRF1, which are associated with meristem maintenance and light responsiveness, respectively, were annotated. To explore the effects of climatic factors on genetic differentiation and local adaptation of S. breviflora, gradient forest (GF) analysis was applied to 25,786 single nucleotide polymorphisms (SNPs) and 113 candidate loci, respectively. The results showed that both temperature and precipitation affected the genetic differentiation of S. breviflora, and precipitation was strongly related to local adaptation. Our study provides a theoretical basis for understanding the local adaptation of S. breviflora.

In vivo ocular microvasculature imaging in rabbits with 3D ultrasound localization microscopy.

Morphological and hemodynamic changes in the ocular vasculature are important signs of various ocular diseases. The evaluation of the ocular microvasculature with high resolution is valuable in comprehensive diagnoses. However, it is difficult for current optical imaging techniques to visualize the posterior segment and retrobulbar microvasculature due to the limited penetration depth of light, particularly when the refractive medium is opaque. Thus, we have developed a 3D ultrasound localization microscopy (ULM) imaging method to visualize the ocular microvasculature in rabbits with micron-scale resolution. We used a 32 × 32 matrix array transducer (center frequency: 8 MHz) with a compounding plane wave sequence and microbubbles. Block-wise singular value decomposition spatiotemporal clutter filtering and block-matching 3D denoising were implemented to extract the flowing microbubble signals at different imaging depths with high signal-to-noise ratios. The center points of microbubbles were localized and tracked in 3D space to achieve the micro-angiography. The in vivo results demonstrate the ability of 3D ULM to visualize the microvasculature of the eye in rabbits, where vessels down to 54 µm were successfully revealed. Moreover, the microvascular maps indicated the morphological abnormalities in the eye with retinal detachment. This efficient modality shows potential for use in the diagnosis of ocular diseases.