A quasi-solid-state self-healing flexible zinc-ion battery using a dual-crosslinked hybrid hydrogel as the electrolyte and Prussian blue analogue as the cathode material.

Due to their excellent safety and lower cost, aqueous Zn-ion batteries (AZIBs) have garnered extensive interest among various energy-storage systems. Here we report a quasi-solid-state self-healing AZIB by using a hybrid hydrogel which consists of dual-crosslinked polyacrylamide and polyvinyl alcohol as a flexible electrolyte and a cobalt hexacyanoferrate (K3.24Co3[Fe(CN)6]2·12.6H2O) Prussian blue analogue as the cathode material. The obtained hybrid hydrogel showed a superhigh fracture strain of up to 1490%, which was almost 15 times higher than that of the original size. Due to the fast formation of hydrogen bonds, the self-healed hydrogel from two pieces still displayed 1165% strain upon failure. As a result, the self-healed battery delivered stable capacities of 119.1, 108.6 and 103.0 mA h g-1 even after being completely cut into 2, 3 and 4 pieces, respectively. The battery capacity recovery rates for each bending cycle exceeded 99.5%, 99.8%, 98.6% and 98.9% during four continuous bending cycles (30 times bending at 90° for each cycle), which indicates outstanding flexibility and self-healing capability. In parallel, the hydrogel electrolyte displayed a broader electrochemically stable window of 3.37 V due to the suppression of water splitting and low overvoltage during the 500 h cycling in a symmetric cell. Zinc dendrites were also suppressed as evidenced in symmetric cell measurements. The assembled AZIB exhibited an initial capacity of 176 mA h g-1 upon vertical bending. The battery showed a reliable capacity of 140.7 mA h g-1 at 0.2 A g-1 after 100 cycles along with a coulombic efficiency of >99%. A reliable capacity of nearly 100 mA h g-1 was retained after 300 cycles at 1.0 A g-1. The highly flexible and self-healing AZIB demonstrates great potential in various wearable electronic devices.

Multiparametric Brain Hemodynamics Imaging Using a Combined Ultrafast Ultrasound and Photoacoustic System.

Studying brain-wide hemodynamic responses to different stimuli at high spatiotemporal resolutions can help gain new insights into the mechanisms of neuro- diseases and -disorders. Nonetheless, this task is challenging, primarily due to the complexity of neurovascular coupling, which encompasses interdependent hemodynamic parameters including cerebral blood volume (CBV), cerebral blood flow (CBF), and cerebral oxygen saturation (SO2). The current brain imaging technologies exhibit inherent limitations in resolution, sensitivity, and imaging depth, restricting their capacity to comprehensively capture the intricacies of cerebral functions. To address this, a multimodal functional ultrasound and photoacoustic (fUSPA) imaging platform is reported, which integrates ultrafast ultrasound and multispectral photoacoustic imaging methods in a compact head-mountable device, to quantitatively map individual dynamics of CBV, CBF, and SO2 as well as contrast agent enhanced brain imaging at high spatiotemporal resolutions. Following systematic characterization, the fUSPA system is applied to study brain-wide cerebrovascular reactivity (CVR) at single-vessel resolution via relative changes in CBV, CBF, and SO2 in response to hypercapnia stimulation. These results show that cortical veins and arteries exhibit differences in CVR in the stimulated state and consistent anti-correlation in CBV oscillations during the resting state, demonstrating the multiparametric fUSPA system's unique capabilities in investigating complex mechanisms of brain functions.

The Spatio-Temporal Expression Profiles of Silkworm Pseudogenes Provide Valuable Insights into Their Biological Roles.

Background: Pseudogenes are sequences that have lost the ability to transcribe RNA molecules or encode truncated but possibly functional proteins. While they were once considered to be meaningless remnants of evolution, recent researches have shown that pseudogenes play important roles in various biological processes. However, the studies of pseudogenes in the silkworm, an important model organism, are limited and have focused on single or only a few specific genes. Objective: To fill these gaps, we present a systematic genome-wide studies of pseudogenes in the silkworm. Methods: We identified the pseudogenes in the silkworm using the silkworm genome assemblies, transcriptome, protein sequences from silkworm and its related species. Then we used transcriptome datasets from 832 RNA-seq analyses to construct spatio-temporal expression profiles for these pseudogenes. Additionally, we identified tissue-specifically expressed and differentially expressed pseudogenes to further understand their characteristics. Finally, the functional roles of pseudogenes as lncRNAs were systematically analyzed. Results: We identified a total of 4410 pseudogenes, which were grouped into 4 groups, including duplications (DUPs), unitary pseudogenes (Unitary), processed pseudogenes (retropseudogenes, RETs), and fragments (FRAGs). The most of pseudogenes in the domestic silkworm were generated before the divergence of wild and domestic silkworm, however, the domestication may also involve in the accumulation of pseudogenes. These pseudogenes were clearly divided into 2 cluster, a highly expressed and a lowly expressed, and the posterior silk gland was the tissue with the most tissue-specific pseudogenes (199), implying these pseudogenes may be involved in the development and function of silkgland. We identified 3299 lncRNAs in these pseudogenes, and the target genes of these lncRNAs in silkworm pseudogenes were enriched in the egg formation and olfactory function. Conclusions: This study replenishes the genome annotations for silkworm, provide valuable insights into the biological roles of pseudogenes. It will also contribute to our understanding of the complex gene regulatory networks in the silkworm and will potentially have implications for other organisms as well.

The rheumatoid arthritis drug auranofin exerts potent anti-lymphoma effect by stimulating TXNRD-mediated ROS generation and inhibition of energy metabolism.

Since the survival of lymphoma patients who experience disease progression or relapse remains very poor, new therapeutic approaches and effective drugs are urgently needed. Here we show that auranofin (AF), an anti-rheumatoid drug thought to inhibit thioredoxin reductases (TXNRDs) as its mechanism of action, exhibited potent activity against multiple cancer types, especially effective against B cell lymphoma. Surprisingly, a knockdown of TXNRD1 and TXNRD2 did not cause significant cytotoxicity, suggesting that abrogation of TXNRD enzyme per se was insufficient to cause cancer cell death. Further mechanistic study showed that the interaction of AF with TXNRD could convert this antioxidant enzyme to a ROS-generating molecule via disrupting its electron transport, leading to a leak of electrons that interact with molecular oxygen to form superoxide. AF also suppressed energy metabolism by inhibiting both mitochondria complex II and the glycolytic enzyme GAPDH, leading to a significant depletion of ATP and inhibition of cancer growth in vitro and in vivo. Importantly, we found that the AF-mediated ROS stress could induce PD-L1 expression, revealing an unwanted effect of AF in causing immune suppression. We further showed that a combination of AF with anti-PD-1 antibody could enhance the anticancer activity in a syngeneic immune-competent mouse B-cell lymphoma model. Our study suggests that AF could be a potential drug for lymphoma treatment, and its combination with immune checkpoint inhibitors would be a logical strategy to increase the therapeutic activity.

Designing a Magnesium/Sodium Hybrid Battery Using Hierarchical Iron Selenide Architecture as Cathode Material and Modified Dual-Ion Salts in Ether as Electrolyte.

We developed a magnesium/sodium (Mg/Na) hybrid battery using a hierarchical disk-whisker FeSe2 architecture (HD-FeSe2) as the cathode material and a modified dual-ion electrolyte. The polarizable Se2- anion reduced the Mg2+ migration barrier, and the 3D configuration possessed a large surface area, which facilitated both Mg2+/Na+ cation diffusion and electron transport. The dual-ion salts with NaTFSI in ether reduced the Mg plating/stripping overvoltage in a symmetric cell. The hybrid battery exhibited an energy density of 260.9 Wh kg-1 and a power density of 600.8 W kg-1 at 0.2 A g-1. It showed a capacity retention of 154 mAh g-1 and a Coulombic efficiency of over 99.5% under 1.0 A g-1 after 800 long cycles. The battery also displayed outstanding temperature tolerance. The findings of 3D architecture as cathode material and hybrid electrolyte provide a pathway to design a highly reliable Mg/Na hybrid battery.

Squalene-epoxidase-catalyzed 24(S),25-epoxycholesterol synthesis promotes trained-immunity-mediated antitumor activity.

The importance of trained immunity in antitumor immunity has been increasingly recognized, but the underlying metabolic regulation mechanisms remain incompletely understood. In this study, we find that squalene epoxidase (SQLE), a key enzyme in cholesterol synthesis, is required for ß-glucan-induced trained immunity in macrophages and ensuing antitumor activity. Unexpectedly, the shunt pathway, but not the classical cholesterol synthesis pathway, catalyzed by SQLE, is required for trained immunity induction. Specifically, 24(S),25-epoxycholesterol (24(S),25-EC), the shunt pathway metabolite, activates liver X receptor and increases chromatin accessibility to evoke innate immune memory. Meanwhile, SQLE-induced reactive oxygen species accumulation stabilizes hypoxia-inducible factor 1α protein for metabolic switching into glycolysis. Hence, our findings identify 24(S),25-EC as a key metabolite for trained immunity and provide important insights into how SQLE regulates trained-immunity-mediated antitumor activity.

Ultralong-life and high-capacity magnesium/sodium hybrid-ion battery using a ternary CoSe/NiSe2/CuSe2 cathode and dual-ion electrolyte.

An ultrahigh-performance magnesium/sodium hybrid-ion battery (MNHB) is developed using ternary CoSe/NiSe2/CuSe2 (CNCS) "micro-flowers" as cathode materials, working with a coordinative [Mg2Cl2][AlCl4]2 and bis(trifluoroethylsulfonyl)imide anionic sodium salt in triglyme electrolyte. After 2000 cycles at 2.0 A g-1, the MNHB shows a stable capacity of 115.5 mA h g-1 and a high Coulombic efficiency exceeding 99.8%. The battery shows very rapid charging, and good stability in extreme environments, providing new opportunities to develop other hybrid-ion systems.

SnS2 quantum dots-coated VO2@carbon nanorods for secondary battery displaying high capacity and rate-performance.

Electrode materials optimization is one of the keys to improving the energy storage characteristics of secondary batteries. Herein, a VO2@carbon@SnS2 composite is developed by coating SnS2 quantum dots (QDs) on lamellar VO2@carbon nanorods, yielding a high-performance aluminum-ion battery cathode. SnS2 QDs embedded in VO2@carbon accelerate electron transport, while the in situ coating of carbon improves cycling stability. When cycling at 0.5 A g-1, capacity is maintained at 157.6 mA h g-1 after 200 cycles. Even at 1.0 A g-1, the cathode can be stably cycled 1000 times. Capacity remains at 176.3 mA h g-1 and coulombic efficiency is 99.1% at temperatures below -10 °C after 100 cycles. These findings provide new ideas for the development of QD-modified composites for application in secondary batteries.

Highly Sensitive Pressure Sensor Based on Elastic Conductive Microspheres.

Elastic pressure sensors play a crucial role in the digital economy, such as in health care systems and human-machine interfacing. However, the low sensitivity of these sensors restricts their further development and wider application prospects. This issue can be resolved by introducing microstructures in flexible pressure-sensitive materials as a common method to improve their sensitivity. However, complex processes limit such strategies. Herein, a cost-effective and simple process was developed for manufacturing surface microstructures of flexible pressure-sensitive films. The strategy involved the combination of MXene-single-walled carbon nanotubes (SWCNT) with mass-produced Polydimethylsiloxane (PDMS) microspheres to form advanced microstructures. Next, the conductive silica gel films with pitted microstructures were obtained through a 3D-printed mold as flexible electrodes, and assembled into flexible resistive pressure sensors. The sensor exhibited a sensitivity reaching 2.6 kPa-1 with a short response time of 56 ms and a detection limit of 5.1 Pa. The sensor also displayed good cyclic stability and time stability, offering promising features for human health monitoring applications.

Size Dependent Phase Transformation of Liquid Gallium.

As the most popular liquid metal (LM), gallium (Ga) and its alloys are emerging as functional materials due to their unique combination of fluidic and metallic properties near room temperature. As an important branch of utilizing LMs, micro- and submicron-particles of Ga-based LM are widely employed in wearable electronics, catalysis, energy, and biomedicine. Meanwhile, the phase transition is crucial not only for the applications based on this reversible transformation process, but also for the solidification temperature at which fluid properties are lost. While Ga has several solid phases and exhibits unusual size-dependent phase behavior. This complex process makes the phase transition and undercooling of Ga uncontrollable, which considerably affects the application performance. In this work, extensive (nano-)calorimetry experiments are performed to investigate the polymorph selection mechanism during liquid Ga crystallization. It is surprisingly found that the crystallization temperature and crystallization pathway to either α -Ga or ß -Ga can be effectively engineered by thermal treatment and droplet size. The polymorph selection process is suggested to be highly relevant to the capability of forming covalent bonds in the equilibrium supercooled liquid. The observation of two different crystallization pathways depending on the annealing temperature may indicate that there exist two different liquid phases in Ga.

A Room-Temperature Self-Healing Liquid Metal-Infilled Microcapsule Driven by Coaxial Flow Focusing for High-Performance Lithium-Ion Battery Anode.

Liquid metals have attracted a lot of attention as self-healing materials in many fields. However, their applications in secondary batteries are challenged by electrode failure and side reactions due to the drastic volume changes during the "liquid-solid-liquid" transition. Herein, a simple encapsulated, mass-producible method is developed to prepare room-temperature liquid metal-infilled microcapsules (LMMs) with highly conductive carbon shells as anodes for lithium-ion batteries. Due to the reasonably designed voids in the microcapsule, the liquid metal particles (LMPs) can expand freely without damaging the electrode structure. The LMMs-based anodes exhibit superior capacity of rete-performance and ultra-long cycling stability remaining 413 mAh g-1 after 5000 cycles at 5.0 A g-1. Ex situ X-ray powder diffraction (XRD) patterns and electrochemical impedance spectroscopy (EIS) reveal that the LMMs anode displays a stable alloying/de-alloying mechanism. DFT calculations validate the electronic structure and stability of the room-temperature LMMs system. These findings will bring some new opportunities to develop high-performance battery systems.

A Temperature-Tolerant Magnesium-Ion Battery Using Ball Cactus-like MgV2O4 as High-Performance Cathode.

Safe and high-performance secondary batteries using for all-climate conditions with different temperatures are highly required. Here, we develop a three-dimensional ball cactus-like MgV2O4 as cathode material for magnesium-ion (Mg-ion) batteries. After cycling 300 times, the capacity maintains 111.7 mAh g-1, while Coulombic efficiency stabilizes at about 100 %. Under temperatures of 45 °C and -5 °C, the capacities remain stable after 200 cycles. After three rounds of rate-performance tests, the capacity keeps quite stable. It is ascribed to the ball cactus-like morphology buffers the volumetric change during Mg2+ insertion/extraction, and provides sufficient pathways for ion diffusion, which has been verified by constant-current intermittent titration technology. It is believed that the good performance enables the Mg-ion batteries to have a all-climate capability.

Wearable Magnetic Field Sensor with Low Detection Limit and Wide Operation Range for Electronic Skin Applications.

Flexible electronic devices extended abilities of humans to perceive their environment conveniently and comfortably. Among them, flexible magnetic field sensors are crucial to detect changes in the external magnetic field. State-of-the-art flexible magnetoelectronics do not exhibit low detection limit and large working range simultaneously, which limits their application potential. Herein, a flexible magnetic field sensor possessing a low detection limit of 22 nT and wide sensing range from 22 nT up to 400 mT is reported. With the detection range of seven orders of magnitude in magnetic field sensor constitutes at least one order of magnitude improvement over current flexible magnetic field sensor technologies. The sensor is designed as a cantilever beam structure accommodating a flexible permanent magnetic composite and an amorphous magnetic wire enabling sensitivity to low magnetic fields. To detect high fields, the anisotropy of the giant magnetoimpedance effect of amorphous magnetic wires to the magnetic field direction is explored. Benefiting from mechanical flexibility of sensor and its broad detection range, its application potential for smart wearables targeting geomagnetic navigation, touchless interactivity, rehabilitation appliances, and safety interfaces providing warnings of exposure to high magnetic fields are explored.

A foldable self-healing rocking chair zinc-ion battery using a three-dimensional zinc metal-free anode.

We developed H2Ti5O11·xH2O on carbon cloth (HTO·xH2O/CC) as a binder-free Zn metal-free anode. This 'rocking chair' battery incorporated a ZnMn2O4/CC cathode, HTO·xH2O/CC anode, and a polyacrylamide-based electrolyte, and exhibited satisfactory flexibility and self-healing. It displayed recoverable capacities after four repetitions of cutting and healing, indicating a potential using as a foldable and wearable battery.

A metal organic framework-derived octahedral Cu1.95S@CoS2 for secondary batteries displaying long cycle life and stable temperature tolerance.

Low-cost and safe batteries are considered to be promising energy-storage systems. Here, a metal organic framework (MOF)-derived octahedral Cu1.95S@CoS2 composite is developed as a high-performance cathode of aluminium-ion (Al-ion) batteries. CoS2 nanoparticles on Cu1.95S provide active sites, making AlCl4- intercalation/deintercalation highly reversible, and reducing polarization. Cycling at 0.5 A g-1, Cu1.95S@CoS2 maintains stable capacities of 136.6 and 122.4 mA h g-1 after 200 cycles at room temperature and -10 °C, respectively. Stable rate-performance is also achieved. These findings will accelerate the application of Al-ion batteries and MOF-derived energy-storage composites.

Dissecting Multiparametric Cerebral Hemodynamics using Integrated Ultrafast Ultrasound and Multispectral Photoacoustic Imaging.

Understanding brain-wide hemodynamic responses to different stimuli at high spatiotemporal resolutions can help study neuro-disorders and brain functions. However, the existing brain imaging technologies have limited resolution, sensitivity, imaging depth and provide information about only one or two hemodynamic parameters. To address this, we propose a multimodal functional ultrasound and photoacoustic (fUSPA) imaging platform, which integrates ultrafast ultrasound and multispectral photoacoustic imaging methods in a compact head-mountable device, to quantitatively map cerebral blood volume (CBV), cerebral blood flow (CBF), oxygen saturation (SO2) dynamics as well as contrast agent enhanced brain imaging with high spatiotemporal resolutions. After systematic characterization, the fUSPA system was applied to quantitatively study the changes in brain hemodynamics and vascular reactivity at single vessel resolution in response to hypercapnia stimulation. Our results show an overall increase in brain-wide CBV, CBF, and SO2, but regional differences in singular cortical veins and arteries and a reproducible anti-correlation pattern between venous and cortical hemodynamics, demonstrating the capabilities of the fUSPA system for providing multiparametric cerebrovascular information at high-resolution and sensitivity, that can bring insights into the complex mechanisms of neurodiseases.

A nanowire-on-microrod polyaniline@FeS2 hybrid as the cathode in high-performance Al-ion batteries.

A nanowire-on-microrod structured polyaniline (PANI)@FeS2 hybrid was developed via a facile metal-organic framework (MOF)-derived chemical method. The in situ grown PANI nanowires on the surface of pyramidal FeS2 microrods displayed better mechanical flexibility and improved Al-storage performance. The PANI nanowires not only enhanced electron transfer during the electrochemical reaction, but also accommodated the volume expansion of FeS2 during discharge. The PANI@FeS2 hybrid as the cathode in AIBs delivered a reliable battery capacity of 152.8 mA h g-1 along with a Coulombic efficiency of >96.5% after 500 cycles at a current density of 1.5 A g-1. In addition, a high capacity retention of 160.2 mA h g-1 after 150 cycles at 0.5 A g-1 at -10 °C was achieved. These findings provide a feasible strategy by constructing a nanowire-on-microrod hybrid that can be applied in high-performance secondary batteries.

A nanowire-assembled Co3S4/Cu2S@carbon binary metal sulfide hybrid as a sodium-ion battery anode displaying high capacity and recoverable rate-performance.

A binary metal sulfide hybrid consisting of nanowire-assembled and polypyrrole-coated Co3S4/Cu2S spheres after nitrogen-doped carbon coating (Co3S4/Cu2S@NC) is developed as an anode, which displays a capacity exceeding 412.3 mA h g-1 after 550 cycles under 1.0 A g-1. Recoverable rate-performance and good temperature tolerance under 50 °C and -10 °C are achievable; a full cell delivers 339.5 mA h g-1, indicating promising potential for applications in various conditions.

All-Climate Long-Life and Fast-Charging Sodium-Ion Battery using Co3 S4 @NiS2 Heterostructures Encapsulated in Carbon Matrix as Anode.

Sodium-ion (Na-ion) battery is one of the research focuses because of high theoretical capacity and low cost. However, seeking for ideal anodes remains a big challenge. Here, a Co3 S4 @NiS2 /C synthesized by in situ growing NiS2 on CoS spheres then converting to Co3 S4 @NiS2 heterostructures encapsulated by carbon matrix, is developed as a promising anode. Co3 S4 @NiS2 /C as anode displays a high capacity of 654.1 mAh g-1 after 100 cycles. Even over 2000 cycles at a high rate of 10 A g-1 , capacity exceeds 143.2 mAh g-1 . Heterostructures between Co3 S4 and NiS2 improve electron transfer as verified by density functional theory (DFT) calculations. In addition, when cycling at a high temperature of 50 °C, the Co3 S4 @NiS2 /C anode displays 525.2 mAh g-1 , while it remains 340 mAh g-1 at -15 °C, indicating all-climate potential for using under different temperatures.

Rational engineering yolk-shell In2S3@void@carbon hybrid as polysulfide-absorbable sulfur host for high-performance lithium-sulfur batteries.

The slow redox kinetics and shuttling behavior of the intermediate lithium polysulfides constrain the further development of lithium-sulfur (Li-S) electrochemistry. A yolk-shell In2S3@void@carbon hybrid engineered to host the sulfur for Li-S batteries is prepared by using a multi-layered assembly method. The In2S3/electrolyte interface acted as powerful adsorption and activation sites for soluble polysulfides, which is demonstrated using density functional theory (DFT) calculations. Moreover, the carbon shell provides redundancy for volume-changes during the cycles. The results indicate that yolk-shell In2S3@S@C hybrid cathode shows good reversibility and rate capability, which preserves 563.6 mA h g-1 after 500 cycles at 0.5 C, indicating the potential for developing high-performance battery systems.