Crescent Antennas as Sensors: Case of Sensing Brain Pathology.

Microstrip crescent antennas offer compactness, conformability, low profile, high sensitivity, multi-band operability, cost-effectiveness and ease of fabrication in contrast to bulky, rigid horn, helical and Vivaldi antennas. This work presents crescent sensors for monitoring brain pathology associated with stroke and atrophy. Single- and multi-element crescent sensors are designed and validated by software simulations. The fabricated sensors are integrated with glasses and experimentally evaluated using a realistic brain phantom. The performance of the sensors is compared in terms of peak gain, directivity, radiation performance, flexibility and detection capability. The crescent sensors can detect the pathologies through the monitoring of backscattered electromagnetic signals that are triggered by dielectric variations in the affected tissues. The proposed sensors can effectively detect stroke and brain atrophy targets with a volume of 25 mm3 and 56 mm3, respectively. The safety of the sensors is examined through the evaluation of Specific Absorption Rate (peak SAR < 1.25 W/Kg, 100 mW), temperature increase within brain tissues (max: 0.155 °C, min: 0.115 °C) and electric field analysis. The results suggest that the crescent sensors can provide a flexible, portable and non-invasive solution to monitor degenerative brain pathology.

A Closed Cavity Ultrasonic Resonator Formed by Graphene/PMMA Membrane for Acoustic Application.

A graphene/poly(methyl methacrylate) (PMMA) closed cavity resonator with a resonant frequency at around 160 kHz has been fabricated. A six-layer graphene structure with a 450 nm PMMA laminated layer has been dry-transferred onto the closed cavity with an air gap of 105 µm. The resonator has been actuated in an atmosphere and at room temperature by mechanical, electrostatic and electro-thermal methods. The (1,1) mode has been observed to dominate the resonance, which suggests that the graphene/PMMA membrane has been perfectly clamped and seals the closed cavity. The degree of linearity of the membrane's displacement versus the actuation signal has been determined. The resonant frequency has been observed to be tuned to around 4% by applying an AC voltage through the membrane. The strain has been estimated to be around 0.08%. This research puts forward a graphene-based sensor design for acoustic sensing.

Design and Evaluation of Wearable Multimodal RF Sensing System for Vascular Dementia Detection.

Vascular dementia is the second most common form of dementia and a leading cause of death. Brain stroke and brain atrophy are the major degenerative pathologies associated with vascular dementia. Timely detection of these progressive pathologies is critical to avoid brain damage. Brain imaging is an important diagnostic tool and determines future treatment options available to the patient. Traditional medical technologies are expensive, require extensive supervision and are not easily accessible. This article presents a novel concept of low- complexity wearable sensing system for the detection of brain stroke and brain atrophy using RF sensors. This multimodal RF sensing system provides a first-of-its-kind RF sensing solution for the detection of cerebral blood density variations and blood clots at an initial stage of neurodegeneration. A customized microwave imaging algorithm is presented for the reconstruction of images in affected areas of the brain. Designs are validated using software simulations and hardware modeling. Fabricated sensors are experimentally validated and can effectively detect blood density variation (1050 ± 50 Kg/m3), artificial stroke targets with a volume of 27 mm3 and density of 1025-1050 Kg/m3, and brain atrophy with a cavity of 58 mm3 within a realistic brain phantom. The safety of the proposed wearable RF sensing system is studied through the evaluation of the Specific Absorption Rate (SAR < 1.4 W/Kg, 100 mW) and thermal conductivity of the brain (<0.152 °C). The results indicate that the device is viable as an efficient, portable, and low-cost substitute for vascular dementia detection.

Mixed Dimensional ZnO/WSe2 Piezo-gated Transistor with Active Millinewton Force Sensing.

This work demonstrates a mixed-dimensional piezoelectric-gated transistor in the microscale that could be used as a millinewton force sensor. The force-sensing transistor consists of 1D piezoelectric zinc oxide (ZnO) nanorods (NRs) as the gate control and multilayer tungsten diselenide (WSe2) as the transistor channel. The applied mechanical force on piezoelectric NRs can induce a drain-source current change (ΔIds) on the WSe2 channel. The different doping types of the WSe2 channel have been found to lead to different directions of ΔIds. The pressure from the calibration weight of 5 g has been observed to result in an ∼30% Ids change for ZnO NRs on the p-type doped WSe2 device and an ∼-10% Ids change for the device with an n-type doped WSe2. The outcome of this work would be useful for applications in future human-machine interfaces and smart biomedical tools.

Tracking the stochastic growth of bacterial populations in microfluidic droplets.

Bacterial growth in microfluidic droplets is relevant in biotechnology, in microbial ecology, and in understanding stochastic population dynamics in small populations. However, it has proved challenging to automate measurement of absolute bacterial numbers within droplets, forcing the use of proxy measures for population size. Here we present a microfluidic device and imaging protocol that allows high-resolution imaging of thousands of droplets, such that individual bacteria stay in the focal plane and can be counted automatically. Using this approach, we track the stochastic growth of hundreds of replicateEscherichia colipopulations within droplets. We find that, for early times, the statistics of the growth trajectories obey the predictions of the Bellman-Harris model, in which there is no inheritance of division time. Our approach should allow further testing of models for stochastic growth dynamics, as well as contributing to broader applications of droplet-based bacterial culture.

Integration of ZnO nanorods with MOS capacitor for self-powered force sensors and nanogenerators.

In this work, we present a novel force-sensing device with zinc oxide nanorods (ZnO NRs) integrated with a metal-oxide-semiconductor (MOS) capacitor and encapsulated with Kapton tape. The details of the fabrication process and working principle of the integrated ZnO NRs-MOS capacitor as a force sensor and nanogenerator have been discussed. The fabricated ZnO-MOS device is tested for both the open-circuit and resistor-connected mode. For an input force in the range of 1-32 N, the open-circuit output voltage of the device is measured to be in the range of 60-100 mV for different device configurations. In the resistor-connected mode, the maximum output power of 0.6 pW is obtained with a 1 MΩ external resistor and input force of 8 N. In addition, the influence of different seed layers (Ag and ZnO) and the patterning geometry of the ZnO nanorods on the output voltage of ZnO-MOS device have been investigated by experiments. An equivalent circuit model of the device has been developed to study the influence of the geometry of ZnO NRs and Kapton tape on the ZnO-MOS device voltage output. This study could be an example of integrating piezoelectric nanomaterials on traditional electronic devices and could inspire novel designs and fabrication methods for nanoscale self-powered force sensors and nanogenerators.

Comparison of ZnO nanowires grown on e-beam evaporated Ag and ZnO seed layers.

In this study, ZnO nanowires with diameters ranging from 50 nm to 500 nm have been synthesized hydrothermally on Ag and ZnO seed layers deposited by electron beam evaporation. ZnO nanowires grown on hetero and homo interfaces have been studied by comparing the growth characteristics of (a) ZnO nanowires on the Ag seed layer and (b) ZnO nanowires grown on the ZnO seed layer, respectively. The surface morphology of the as-evaporated seed layers before the nanowire growth has been investigated. Electron backscatter diffraction (EBSD) has been employed to examine the crystallinity of ZnO nanowires. In addition, the integrity of the Ag-ZnO heterointerface has been investigated using high-resolution transmission electron microscopy (HR-TEM). The length, diameter, density, and alignment of nanowires grown on Ag and ZnO seed layers have been studied as a function of growth time from 0.5 hours to 18 hours and precursor concentration from 5 mM to 18 mM. Furthermore, for both the Ag-ZnO nanowire heterostructure and ZnO-ZnO nanowire homostructure, the role of defects in the optical properties in the wavelength range of 517 nm to 900 nm has been studied using photoluminescence (PL) spectroscopy.