Research on risk assessment model and simulation of online group polarization in emergencies.

This study proposes a framework for the risk structure of group polarization in the online information of sudden public health incidents, as well as the causes and constraints of group polarization distributed in the ternary space. Then, combining the above two and based on the concept of phase change space, a simulation model of group polarization of online information in sudden public health incidents was constructed by reflecting the risk of group polarization with the number of network users who hold extreme views. The system dynamics simulation of the model is carried out by using the software Anylogic, and predict the evolution trend of the model from the perspective of simulation. The research results indicate that the model built in this study can effectively simulate the formation and dissemination of extreme opinions in the online public opinion of public health emergencies. The vital factors or constraints on the group polarization include emotional guidance, heat reduction, as well as and life pressure.

Continuous and Controllable Preparation of Sodium Alginate Hydrogel Tubes Guided by the Soft Cap Inspired by the Apical Growth of the Plant.

Hydrogel tubes made of sodium alginate (SA) have potential applications in drug delivery, soft robots, biomimetic blood vessels, tissue stents, and other fields. However, the continuous preparation of hollow SA hydrogel tubes with good stability and size control remains a huge challenge for chemists, material scientists, and medical practitioners. Inspired by the plant apical growth strategy, a new method named soft cap-guided growth was proposed to produce SA hydrogel tubes. Due to the introduction of inert low gravity substances, such as air and heptane, into the extrusion needle in front of calcium chloride solution to form a soft cap, the SA hydrogel tubes with controllable sizes were fabricated rapidly and continuously without using a template through a negative gravitropism mechanism. The SA hydrogel tubes had good tensile strength, high burst pressure, and good cell compatibility. In addition, hydrogel tubes with complex patterns were conveniently created by controlling the motion path of a soft cap, such as a rotating SA bath or magnetic force. Our research provided a simple innovative technique to steer the growth of hydrogel tubes, which made it possible to mass produce hydrogel tubes with controllable sizes and programmable patterns.

Thermochromic Hydrogels with Adjustable Transition Behavior for Smart Windows.

With the fast economic development and accelerating urbanization, more and more skyscrapers made entirely of concrete and glass are being constructed. To keep a comfortable indoor environment, massive energy for air conditioning or heating appliances is consumed. A huge amount of heat (>30%) is gained or released through glass windows. Using smart windows with the capability to modulate light is an effective way to reduce building energy consumption. Thermochromic hydrogel is one of the potential smart window materials due to its excellent thermal response, high radiation-blocking efficiency, cost-effectiveness, biocompatibility, and good uniformity. In this work, polyhydroxypropyl acrylate (PHPA) hydrogels with controllable lower critical solution temperature (LCST) were prepared by photopolymerization. The transition temperature and transition rate under "static transition" conditions were investigated. Unlike "static" conditions in which the transition temperature was not affected by the initial and final temperature and heating/cooling ramp, the transition temperature varied with the rate of temperature change under dynamic conditions. The "dynamic" transition temperature of the PHPA hydrogel gradually increased with the increase of the heating rate. It was the result of the movement of the molecular chains lagging behind the temperature change when the temperature change was too fast. The results of the solar irradiation experiment by filling PHPA hydrogels into double glazing windows showed that the indoor temperature was about 15 °C lower than that of ordinary glass windows, indicating that it can significantly reduce the energy consumption of air conditioning. In addition, a wide range of adjustable transition temperatures and fast optical response make PHPA hydrogels potentially applicable to smart windows.

Photocuring 3D Printing of Hydrogels: Techniques, Materials, and Applications in Tissue Engineering and Flexible Devices.

Photocuring 3D printing of hydrogels, with sophisticated, delicate structures and biocompatibility, attracts significant attention by researchers and possesses promising application in the fields of tissue engineering and flexible devices. After years of development, photocuring 3D printing technologies and hydrogel inks make great progress. Herein, the techniques of photocuring 3D printing of hydrogels, including direct ink writing (DIW), stereolithography (SLA), digital light processing (DLP), continuous liquid interface production (CLIP), volumetric additive manufacturing (VAM), and two photon polymerization (TPP) are reviewed. Further, the raw materials for hydrogel inks (photocurable polymers, monomers, photoinitiators, and additives) and applications in tissue engineering and flexible devices are also reviewed. At last, the current challenges and future perspectives of photocuring 3D printing of hydrogels are discussed.

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants.

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

Computational Insights into a CO2-Responsive Emulsion Prepared Using the Superamphiphile Assembled by Electrostatic Interactions.

The superamphiphiles exhibit broad prospects for fabricating stimuli-responsive emulsions. Because the superamphiphiles are assembled via noncovalent interactions, they have the advantage of fast response and high efficiency. Recently, a series of switchable emulsions using CO2-responsive superamphiphiles have been developed, which extends the applications of CO2-responsive materials in widespread field. However, there is still a lack of fundamental understanding on the switching mechanism related to the assembled structure of superamphiphiles at the oil-water interface. We employed molecular dynamics (MD) simulations to investigate the reversible emulsification/demulsification process of a responsive emulsion system stabilized by a recently developed responsive superamphiphile (BTOA), which consists of oleic acid (OA) and cationic amine (named 1,3-bis(aminopropyl)tetramethyldisiloxane, BT). The simulation results present the morphologies in both the emulsion and demulsification states. It is found that the ionized OA- and the protonated BT+ together form an adsorption layer at the oil-water interface. The hydrophobic parts of BT+ are inserted into the adsorption layer, and the two amine groups contact the water phase. This adsorption layer reduces the interfacial tension and stabilizes the emulsion. After the bubbling of CO2, the surfactants were fully protonated to OA and BT2+. Because of the changes in the molecular polarity, OA and BT2+ entered the oil and water phases, respectively, resulting in demulsification. The structural and dynamical properties were analyzed to reveal the different intermolecular interactions that were responsible for the reversible reversibility of the emulsion. The observations are considered to be complementary to experimental studies and are expected to provide deeper insights into studies on developing responsive materials via supramolecular assemblies.

Initiator-Free Photocuring 3D-Printable PVA-Based Hydrogel with Tunable Mechanical Properties and Cell Compatibility.

Poly(vinyl alcohol) (PVA)-based hydrogels have attracted great attention and been widely used in biological tissue engineering. With the development of modern medicine, precision medicine requires the customization of medical materials. However, lacking of photocurable functional groups or the performance of rapid phase transition makes PVA-based hydrogels difficult to be customizable molded through photocuring 3D printing technique. In this research, customizable PVA-based hydrogels with high performance through 3D photocurable printing and freezing-thawing (F-T) process are obtained. The ability of 3D-printable is endowed by the introduction of polyvinyl alcohol-styrylpyridine (PVA-SBQ), which can be photo-crosslinked quickly without photoinitiator. Meanwhile, the tunable mechanical properties are achieved by adjusting the mass ratio of PVA-SBQ to PVA, and PVA can offer the physical crosslinking points through freezing-thawing (F-T) process. The hydrogels with high resolution are prepared by digital light procession 3D printing with the mass ratio 1:1 of PVA-SBQ to PVA solution. Attributed to the absence of initiator, and no small molecule residues inside the hydrogels, the hydrogels have good biocompatibility and have the potential to be applicated in the field of biological tissue engineering.

Oxidized dextran-crosslinked ferrocene-chitosan-PEI composite porous material integrating adsorption and degradation to malachite green.

Treating wastewater containing malachite green (MG) using porous materials with both adsorption and degradation functions have become a major challenge in achieving the carbon neutrality goal. Herein by incorporating the ferrocene (Fc) group as a Fenton active center, a novel composite porous material (DFc-CS-PEI) was prepared using chitosan (CS) and polyethyleneimine (PEI) as skeletons and oxidized dextran as a crosslinker. DFc-CS-PEI not only possesses satisfactory adsorption performance to MG but also excellent degradability in the presence of a minor amount of H2O2 (3.5 mmol/L) without any additional assistance, due to high specific surface area and active Fc group. The maximum adsorption capacity is ca. 177.73 ± 3.11 mg/g, outperforming most CS-based adsorbents. The removal efficiency of MG is significantly enhanced from 20 % to 90 % as DFc-CS-PEI and H2O2 coexist, due to ·OH-dominated Fenton reaction, and remained in a wide pH range (2.0-7.0). Cl- exhibits notable suppression on the degradation of MG because of quenching effects. Note that DFc-CS-PEI has a very small iron leaching (0.2 ± 0.015 mg/L), and can be rapidly recycled by simple water-washing, without any harmful chemicals and potential second pollution. Such versatility, high stability, and green recyclability make the as-prepared DFc-CS-PEI a promising porous material for the treatment of organic wastewater.

Patterned Magnetofluids via Magnetic Printing and Photopolymerization for Multifunctional Flexible Electronic Sensors.

Liquid conductor-based flexible sensors with high mechanical deformability and reliable electrical reversibility have aroused great interest in electronic skin, soft robotics, environmental monitoring, and other fields. Herein, we develop a novel strategy to fabricate liquid conductor-based flexible sensors by combining ionic liquid-based magnetofluids (IL-MFs), magnetic printing, and photopolymerization techniques. The as-prepared sensors exhibit excellent electromechanical properties, such as a wide detection range, low hysteresis, fast response time, good durability, etc. Moreover, the gauge factors (GFs) of the sensor could be easily adjusted by changing the modulators with different line widths or patterns, and the strain sensors can also be designed for anisotropic monitoring. Apart from serving as strain sensors, the magnetofluid-based flexible sensors can be used to detect external pressure, human activities, and changes in temperature, illumination, and magnetic field as well. This work provides a facile strategy to fabricate liquid conductor-based multifunctional sensors. Such a magnetofluid-based sensor has a great promising future.

Differentially expressed lncRNAs involved in immune responses of Haliotis diversicolor and H. discus hannai challenged with Vibrio parahaemolyticus.

Although many studies have shown that lncRNA, a non-coding RNA with a length of more than 200 bases, is involved in various biological functions, including the immune process, stress process, and cell development process. However, the function of lncRNA in abalone, especially in immunity, has been rarely studied. H. discus hannai and H. diversicolor are two main aquaculture abalone, and their growth is easily affected by the main pathogen Vibrio parahaemolyticus. Through rigorous screening procedures for transcripts in this study, we found that lncRNAs were 34,240, 23,022 in Haliotis diversicolor and H. discus hannai injected with V. parahaemolyticus, respectively. We also identified the unique and common lncRNAs and mRNAs of two abalone species for the first time; the shared lncRNAs and mRNAs in Haliotis diversicolor and H. discus hannai were 2352 and 13,165, respectively. Then gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis of the differentially expressed target genes of common and unique lncRNAs has shown that common lncRNAs could be widely involved in the biological processes of stress and cell development in both abalone species. In contrast, unique lncRNAs are linked to the Toll-like receptor, NF-kappaB signaling pathway of H. diversicolor, and pattern recognition receptors and lectins immune-related pathways of H. discus hannai. The co-expression network shows that some immune-related genes, such as INFK1, INFK2, CASP2, CASP8, IRAK1, lectin C, were closely related to lncRNAs. Further, we identified the targeted relationship between some immune-related genes and lncRNAs by qRT-PCR, through which we showed that the expression trend between targeted genes, such as INFK1 and Lnc7057, lectin C and Lnc6943, Lnc5637, and PLCG1 and Lnc1692, were consistent. In general, our results showed that lncRNA expression was induced in the two species of abalone after being infected with V. parahaemolyticus, and lncRNA was involved in the immune response of abalone by targeting coding genes.

Base-promoted Lewis acid catalyzed synthesis of quinazoline derivatives.

A one-pot protocol has been developed for the synthesis of quinazolinones from amide-oxazolines with TsCl via a cyclic 1,3-azaoxonium intermediate and 6π electron cyclization in the presence of a Lewis acid and base. The process is operationally simple and has a broad substrate scope. This method provides a unique strategy for the construction of quinazolinones.

Robust Physically Linked Double-Network Ionogel as a Flexible Bimodal Sensor.

To date, ionogel sensors have aroused the extensive interest as an alternative to hydrogel sensors, as they are promising materials to solve the problems of easy drying and easy freezing. However, the weak mechanical properties of ionogels have seriously hindered their large-scale application. Herein, a robust physically linked double-network ionogel (DN ionogel) was fabricated via interpenetrating a poly(hydroxyethyl acrylate) network into an agarose network in 1-ethyl-3-methylimidazolium chloride. The DN ionogel possessed good mechanical properties, high transparency, extreme temperature tolerance, and excellent self-adhesion. The superior electromechanical properties render the DN ionogel as a perfect candidate to be utilized as a strain sensor to monitor various human activities. In addition, the DN ionogel exhibited reasonably high sensitivity to temperature. Therefore, it is believed that this high performance strain-temperature bimodal sensor offers a promising prospect in flexible intelligent electronics.

Synthesis of quinazolin-4(1H)-ones via amination and annulation of amidines and benzamides.

Quinazolinones have broad applications in the biological, pharmaceutical and material fields. Studies on the synthesis of these compounds are therefore widely conducted. Herein, a novel and highly efficient copper-mediated tandem C(sp2)-H amination and annulation of benzamides and amidines for the synthesis of quinazolin-4(1H)-ones is proposed. This synthetic route can be useful for the construction of quinazolin-4(1H)-one frameworks.

EriB targeted inhibition of microglia activity attenuates MPP+ induced DA neuron injury through the NF-κB signaling pathway.

Accumulating evidence indicates that microglia activation is associated with an increased risk for developing Parkinson's disease (PD). With the progressive and selective degeneration of dopaminergic (DA) neurons, proinflammatory cytokines are elevated in the substantia nigra (SN) of PD patients. Thus, anti-inflammation has become one of the therapeutic strategies of PD. Eriocalyxin B (EriB), a diterpenoid isolated from Isodoneriocalyx, was previously reported to have anti-inflammatory effects. MPTP mouse model and MPP+ cell model were prepared to detect the role of EriB in regulating microglia activation and neuron protection. Midbrain tissue and primary cultured microglia and neuron were used to examine microglia activation and neuron damage by immunofluorescence, real-time PCR, western-blot and Elisa assay. Open field activity test was to evaluate the changes of behavioral activity in MPTP-induced PD mouse model. EriB was efficacious in protecting DA neurons by inhibiting microglia activation in PD mice model. Treatment with EriB led to amelioration of disordered sports of PD mice model, which correlated with reduced microglia-associated inflammation and damaged DA neurons. EriB treatment abolished MPP+ induced microglia activation damages to DA neurons in a microglia and DA neurons co-culture system. The underlying mechanism of EriB-induced protective effects involved inhibition of microglia associated proinflammatory cytokines production through the phenotypic shift of microglial cells as well as activator of transcription and nuclear factor-κB (NF-κB) signaling pathways. These findings demonstrate that EriB exerts potent anti-inflammatory effects through selective modulation of microglia activation by targeting NF-κB signaling pathways, thus exerting the protective effect against on MPP+-induced DA neurons injury. This study may provide insights into the promising therapeutic role of EriB for PD.

MicroRNA-34a induces transdifferentiation of glioma stem cells into vascular endothelial cells by targeting Notch pathway.

The function of microRNA-34a (miR-34a) in transdifferentiation of glioma stem cells (GSCs) into vascular endothelial cells (VECs) was explored by focusing on Notch ligand Delta-like 1 (Dll1). MiR-34a mimics was transfected into CD133 + glioma cell U251. The angiogenesis feature of miR-34a transfected U251 cells was investigated and the expressions of CD31, CD34, Vwf, Notch 1, and Dll1 were quantified. Length of branching vessel-like structures in the miR-34a transfected U251 cells was significantly higher than control cells. The VEC feature of miR-34a overexpressed U251 cells was further confirmed by the expressions of CD31, CD34, and vWF. Transfection of miR-34a decreased the expression of Notch 1 and Dll1. Furthermore, the miR-34a overexpression-enhanced tube formation of GSCs was suppressed when the decreased expression of Dll1 was restored. The current study highlighted the potential of miR-34a as an inducer in GSCs' transdifferentiation into VECs by targeting Dll1.

Chip-based dual-molecularly imprinted monolithic capillary array columns coated Ag/GO for selective extraction and simultaneous determination of bisphenol A and nonyl phenol in fish samples.

An analytical technique for selective, simultaneous determination of bisphenol A (BPA) and nonyl phenol (NP) in fish samples was established by a solid-phase extraction chip integrated with array columns of dual-molecularly imprinted polymer-coated silver-modified graphene oxide (Ag/GO-dual-MISPE-chip). Ag/GO dual-molecularly imprinted polymers (Ag/GO-dual-MIPs) were synthesized by in situ polymerization using Ag/GO as the supporting matrix which extracted templates easily. The affinity and specificity on the Ag/GO-dual-MISPE monolithic column were also investigated. The array extraction chip showed high binding capacity and selectivity to BPA and NP, with the imprinting factors of BPA and NP reaching 2.6 and 2.9, respectively. Ag/GO-dual-MIPs were characterized by scanning electron microscopy and Fourier transform-infrared (FT-IR) spectroscopy. As Low as 2.4ngL-1 BPA and 4.7ngL-1 NP were detected by high performance liquid chromatography coupled with fluorescence detection. The enrichment factor was 113-fold for BPA and 92-fold for NP. Therefore, the chip-based array columns are feasibly applicable to facile extraction of BPA and NP and effective clean-up of impurities in fish samples.

[Surgical treatment of acetabular type C1 acetabular fracture by posteroproximal-posteroanterior sequential reduction and internal fixation].

OBJECTIVE: To investigate the operative reduction techniques and clinical results of surgical treatment of type C1 (AO/ASIF) acetabular fracture by posteroproximal-posteroanterior sequential reduction and internal fixation. METHODS: From August 2004 to January 2012, 13 patients with type C1 (AO/ASIF) acetabular fracture were treated by posteroproximal-posteroanterior sequential reduction and internal fixation. Of them, 8 cases were male and 5 cases were female with an average age of 42 years years old (ranged, 18 to 64). Pelvis 3-dimentional CT reconstruction were used to confirmed the classification of fracture, and the operation were performed during from 5 to 20 days with an average of 9.5 days. Operation time, blood loss, complications and reduction were recorded and evaluated. The function of hip joint were accessed at the final follow-up. RESULTS: The operation time ranged from 190 to 290 min with an average of 240 min. The mean blood loss was 1 800 ml (ranged, 1 300 to 3 000 ml). One case had superficial infection and healed after 3 weeks. According to Matta reduction criteria, 8 cases obtained anatomical reduction, 4 cases got satisfied results and 1 cases got unsatisfied results. Eleven cases were followed up with an average of (24.0 +/- 8.0) months, and 2 cases were lost to follow-up. According to revised Mede d'Aubingne and Postel evaluation system, 7 cases got excellent results, 2 good, 1 moderate and 1 poor. CONCLUSION: Posteroproximal-posteroanterior sequential reduction and internal fixation for the treatment of type C1 (AO/ASIF) acetabular fracture can achieve satisfied surgical proces and operation quality.

[Treatment of acromion base fractures with double plates internal fixation].

OBJECTIVE: To study clinical effects of double plates fixation for the treatment of acromion base fracutres. METHODS: From January 2010 to May 2012, 7 patients with acromion base fractures were treated with double plates ORIF surgical treatment. There were 5 males and 2 females, with an average age of 36.3 years old (ranged, 24 to 62 years old). All fractures were acuted and closed injuries. The duration from injury to surgery was 4.6 days (ranged, 2 to 10 days). Hardegger functional criterion, Visual Analogue Scale (VAS) and complications of the patients were documented analysis. RESULTS: All the patients were followed up,and the duration ranged from 4 to 13 months (averaged 8.9 months). The healing duration of fractures ranged from 8 to 14 weeks without any infection, shoulder instability, subacromial impingement syndrome, nonunion and failure of internal fixation. At the latest follow-up, the VAS ranged from 0 to 5. According to Hardegger criterion, 2 patients got an excellent result, 4 good and 1 poor. CONCLUSION: Double plates ORIF plays a positive role in the treatment of acromion base fractures, which reduces complications and maximally restore the function of shoulder.

CD200-CD200R dysfunction exacerbates microglial activation and dopaminergic neurodegeneration in a rat model of Parkinson's disease.

BACKGROUND: Increasing evidence suggests that microglial activation may participate in the aetiology and pathogenesis of Parkinson's disease (PD). CD200-CD200R signalling has been shown to be critical for restraining microglial activation. We have previously shown that expression of CD200R in monocyte-derived macrophages, induced by various stimuli, is impaired in PD patients, implying an intrinsic abnormality of CD200-CD200R signalling in PD brain. Thus, further in vivo evidence is needed to elucidate the role of malfunction of CD200-CD200R signalling in the pathogenesis of PD. METHODS: 6-hydroxydopamine (6-OHDA)-lesioned rats were used as an animal model of PD. CD200R-blocking antibody (BAb) was injected into striatum to block the engagement of CD200 and CD200R. The animals were divided into three groups, which were treated with 6-OHDA/Veh (PBS), 6-OHDA/CAb (isotype control antibody) or 6-OHDA/BAb, respectively. Rotational tests and immunohistochemistry were employed to evaluate motor deficits and dopaminergic neurodegeneration in animals from each group. HPLC analysis was used to measure monoamine levels in striatum. Morphological analysis and quantification of CD11b- (or MHC II-) immunoreactive cells were performed to investigate microglial activation and possible neuroinflammation in the substantia nigra (SN). Finally, ELISA was employed to assay protein levels of proinflammatory cytokines. RESULTS: Compared with 6-OHDA/CAb or 6-OHDA/Veh groups, rats treated with 6-OHDA/BAb showed a significant increase in counts of contralateral rotation and a significant decrease in TH-immunoreactive (TH-ir) neurons in SN. A marked decrease in monoamine levels was also detected in 6-OHDA/BAb-treated rats, in comparison to 6-OHDA/Veh-treated ones. Furthermore, remarkably increased activation of microglia as well as up-regulation of proinflammatory cytokines was found concomitant with dopaminergic neurodegeneration in 6-OHDA/BAb-treated rats. CONCLUSIONS: This study shows that deficits in the CD200-CD200R system exacerbate microglial activation and dopaminergic neurodegeneration in a 6-OHDA-induced rat model of PD. Our results suggest that dysfunction of CD200-CD200R signalling may be involved in the aetiopathogenesis of PD.

Draft genome sequence of the novel agar-digesting marine bacterium HQM9.

Strain HQM9, an aerobic, rod-shaped marine bacterium from red algae, can produce agarases and liquefy solid plating media efficiently when agar is used as a coagulant. Here we report the draft genome sequence and the initial findings from a preliminary analysis of strain HQM9, which should be a novel species of Flavobacteriaceae.