Autologous rib grafts for craniocervical junction surgery in children: a clinical application.

OBJECTIVE: Autologous iliac bone is commonly used as a bone graft material to achieve solid fusion in craniocervical junction (CVJ) surgery. However, the developing iliac bone of children is less than ideal as a bone graft material. The matured rib bone of children presents a potential substitute material for iliac bone. The aim of this study was to evaluate the efficacy of autologous rib grafts for craniocervical junction surgery in children. METHODS: The outcomes of 10 children with abnormalities of the craniocervical junction who underwent craniocervical junction surgery between January 2020 and December 2022 were retrospectively reviewed. All patients underwent posterior fusion and internal fixation surgery with autologous rib grafts. Pre- and post-operative images were obtained and clinical follow-ups were conducted to evaluate neurological function, pain level, donor site complications, and bone fusion rates. RESULTS: All surgeries were successful. During the 8- to 24-month follow-up period, all patients achieved satisfactory clinical results. Computed tomography at 3-6 months confirmed successful bone fusion and regeneration of the rib defect in all patients with no neurological or donor site complications. CONCLUSION: Autologous rib bone is a safe and effective material for bone grafting in craniocervical junction fusion surgery for children that can reduce the risks of donor site complications and increase the amount of bone graft, thereby achieving a higher bone fusion rate.

The development of posterior reduction forceps for atlantoaxial dislocation and its preliminary application in irreducible atlantoaxial dislocation.

OBJECTIVE: To develop posterior reduction forceps for atlantoaxial dislocation and evaluate the preliminary clinical application of this forceps in assisting simple posterior screw-rod system reduction and fixation in the treatment of irreducible atlantoaxial dislocation. METHODS: Based on the posterior atlantoaxial screw-rod system, posterior reduction forceps was developed to assist simple posterior screw-rod system for the treatment of irreducible atlantoaxial dislocation. From January 2021 to October 2022, 10 cases with irreducible atlantoaxial dislocation were treated with this technique. The Japanese Orthopaedic Association (JOA) score was applied before and after surgery to evaluate the neurological status of the patient, and the Atlanto-dental interval (ADI) was measured before and after surgery to evaluate the atlantoaxial reduction. X-ray and CT were performed to evaluate internal fixation, atlantoaxial sequence and bone graft fusion during regular follow-up. MRI was performed to evaluate the status of atlantoaxial reduction and spinal cord compression after surgery. RESULTS: All 10 patients were successfully operated, and there were no complications such as spinal nerve and vascular injury. Postoperative clinical symptoms were significantly relieved in all patients, and postoperative JOA score and ADI were significantly improved compared with those before surgery (P < 0.05). CONCLUSIONS: The developed posterior reduction forceps for atlantoaxial dislocation can assist the simple posterior screw-rod system in the treatment of irreducible atlantoaxial dislocation to avoid the release in anterior or posterior approach and reduce the difficulty of surgery. The preliminary results of this technique are satisfactory and it has a good application prospect.

Evaluation of the Anatomical Reference Point in Posterior Minimally Invasive Atlantoaxial Spine Surgery: A Cadaveric Anatomical Study.

OBJECTIVE: Minimally invasive atlantoaxial surgery offers the benefits of reduced trauma and quicker recovery. Previous studies have focused on feasibility and technical aspects, but the lack of comprehensive safety information has limited its availability and widespread use. This study proposes to define the feasibility and range of surgical safety using the intersection of the greater occipital nerve and the inferior border of the inferior cephalic oblique as a reference point. METHODS: Dissection was performed on 10 fresh cadavers to define the anatomical reference point as the intersection of the greater occipital nerve and the inferior border of the inferior cephalic oblique muscle. The study aimed to analyze the safety range of minimally invasive atlantoaxial fusion surgery by measuring the distance between the anatomical reference point and the transverse foramen of the axis, the distance between the anatomical reference point and the superior border of the posterior arch of the atlas, and the distance between the anatomical reference point and the spinal canal. Measurements were compared using Student's t test. RESULTS: The point where the occipital greater nerve intersects with the inferior border of the inferior cephalic oblique muscle was defined as the anatomical marker for minimally invasive posterior atlantoaxial surgery. The distance between this anatomical marker and the transverse foramen of the axis was measured to be 9.32 ± 2.04 mm. Additionally, the distance to the superior border of the posterior arch of the atlas was found to be 21.29 ± 1.93 mm, and the distance to the spinal canal was measured to be 11.53 ± 2.18 mm. These measurement results can aid surgeons in protecting the vertebral artery and dura mater during minimally invasive posterior atlantoaxial surgery. CONCLUSIONS: The intersection of the greater occipital nerve with the inferior border of the inferior cephalic oblique muscle is a safe and reliable anatomical landmark in minimally invasive posterior atlantoaxial surgery.

Comparison of Transoral Anterior Jefferson-Fracture Reduction Plate and Posterior Screw-Rod Fixation in C1-Ring Osteosynthesis for Unstable Atlas Fractures.

OBJECTIVE: To compare the clinical outcomes of transoral anterior Jefferson-fracture reduction plate (JeRP) and posterior screw rod (PSR) surgery for unstable atlas fractures via C1-ring osteosynthesis. METHODS: From June 2009 to June 2022, 49 consecutive patients with unstable atlas fractures were treated by transoral anterior JeRP fixation (JeRP group) or PSR fixation (PSR group) and followed up at General Hospital of Southern Theatre Command of PLA; 30 males and 19 females were included. The visual analogue scale (VAS) score, Neck Disability Index (NDI), distance to anterior arch fracture (DAAF), distance to posterior arch fracture (DPAF), lateral mass displacement (LMD), Redlund-Johnell value, postoperative complications, and fracture healing rate were retrospectively collected and statistically analyzed. RESULTS: Compared with that in the PSR group, the bleeding volume in the JeRP group was lower, and the length of hospital stay was longer. The VAS scores and NDIs of both groups were significantly improved after surgery. The postoperative DAAF and DPAF were significantly smaller after surgery in both groups. Compared with the significantly shorter DPAF in the PSR group, the JeRP group had a smaller DAAF, shorter LMDs and larger Redlund-Johnell value postoperatively and at the final follow-up. The fracture healing rate at 3 months after surgery was significantly greater in the JeRP group (p < 0.05). CONCLUSION: Both C1-ring osteosynthesis procedures for treating unstable atlas fractures yield satisfactory clinical outcomes. Transoral anterior JeRP fixation is more effective than PSR fixation for holistic fracture reduction and short-term fracture healing, but the hospital stay is longer.

Suppression of Randomness in Electrically Pumped Random Lasing from a ZnO Film-Based Light-Emitting Device on Silicon.

We report on the suppressed randomness in electrically pumped random lasing (RL) from a light-emitting device (LED) based on a metal-insulator-semiconductor (MIS) structure of Au/SiOx (x < 2)/ZnO on a silicon substrate, by means of patterning the light-emitting ZnO polycrystalline film into a number of square blocks separated by streets that are filled with the SiOx insulator. It is found that the RL modes can be remarkably reduced by shrinking the blocks in the absence of interblock optical coupling. Meanwhile, with the imposition of interblock optical coupling by shrinking the streets, the RL modes can be further reduced, and more importantly, the strongest mode wavelength is stabilized around 380 nm, where the ZnO film exhibits the largest optical gain.

Surgical Failure and Revision Strategy for Atlantoaxial Dislocation: A retrospective study of 109 Cases.

STUDY DESIGN: Retrospective study. OBJECTIVE: To classify surgical failures following atlantoaxial dislocation, present strategies for revisions and evaluate the clinical results of revision surgery. SUMMARY OF BACKGROUND DATA: With the increase in atlantoaxial dislocation surgery, the number of surgical failures has gradually risen. However, current reports on atlantoaxial surgical revision are limited in scope. There remains a lack of summary regarding the causes of surgical failure, a detailed classification system, and no proposed strategy for revision surgery. METHODS: 109 cases of failed surgery following atlantoaxial dislocation were classified according to the reduction immediately after surgery and the fusion status before revision. The reduction, decompression, fusion status and outcomes following revision surgery were evaluated by X-ray, CT, MRI and JOA score. The data were analyzed statistically with a paired-samples t test and multivaraible logistic regression analysis. RESULTS: The 109 patients were classified into three categories of failure: non-reduction with non-fusion (NR-NF, 73 cases), non-reduction with fusion (NR-F, 19 cases), and reduction with non-fusion (R-NF, 17 cases). Sixty-four patients underwent anterior revision, 21 posterior revision, and 24 anteroposterior revision. Postoperative complications were the primary cause of early revisions. After revision, complete decompression was achieved in all cases, anatomical reduction in 89 cases, significant improvement of JOA score in 77 cases, and fusion achieved in 86 cases. Twelve cases experienced surgical complications and 3 underwent a second revision. CONCLUSIONS: We found that NR-NF was the most common type of failure following surgery for atlantoaxial dislocation. Revision strategies can be guided according to our descriptive classification of failure, and revision surgery should focus on achieving adequate reduction, appropriate fixation and reliable fusion to optimize post-surgical outcomes.

Calcium phosphate cement promotes the stability of osteoporotic lumbar pedicle screw by enhancer-injecters with different number of holes.

BACKGROUNDS: This study aimed to compare whether Calcium phosphate cement (CPC) promotes the stability of osteoporotic lumbar pedicle screw by enhancer-injecters with different number of holes. METHODS: Through a self-designed bone cement injection device, the pedicle screw canal was strengthened with calcium phosphate bone cement, and divided into 4-hole group, 6-hole group, 8-hole group, straight pore group and the control group. The screw was inserted into the mechanical test module, the Maximum insertion torque and Maximum axial pull-out strength were recorded, and the distribution of calcium phosphate bone cement was analyzed by CT and X-ray. The data results were analyzed using SPSS19.0 statistical software package. RESULTS: The distribution of bone cement in different reinforcement groups was different and showed regularity. The bone cement in the 4-hole group was roughly located in the head 1/3 of the screw, the 6-hole group was located in the middle 1/3 of the screw, and the 8-hole group was located in the caudal 1/3 of the screw. Compared with the control group, the maximum axial pull-out force of screws in the lateral hole and full screw tunnel reinforcement group was significantly increased. There was no significant difference between the 4-hole, 6-hole and straight pore groups. There was no difference in the screw-in torque between the reinforcement groups, and they all increased significantly compared with the control group, and the difference was statistically significant. After the screw was pulled out, the interface between the bone cement and the polyurethane material was fractured, and a tight package was formed with the screw. CONCLUSIONS: Enhancer syringes with different hole numbers combined with CPC bone cement injection can significantly increase the maximum screw pull-out force. The 8-hole group has a smaller pull-out force and is relatively prone to leakage of reinforcing material, which lacks safety in use. The local reinforcement of 4-hole and 6-hole sheath can play a similar role to that of total nail tunnel reinforcement.

Biomechanical Study of Horizontal Screw-screw Crosslink in C1-2 Pedicle Screw-rod Fixation.

STUDY DESIGN: This is a biomechanical study in vitro. OBJECTIVE: To investigate the biomechanical differences between horizontal rod-rod crosslink (hR-R CL) and the horizontal screw-screw crosslink (hS-S CL) implementation in C1-2 pedicle screw-rod (C1-2 PSR) fixation. SUMMARY OF BACKGROUND: To improve internal fixation stability, transverse connector (TC) is used in C1-2 PSR to increase torsional stiffness. The connection mode of horizontal connection includes hR-R CL and hS-S CL. hS-S CL adopted in C1-2 PSR was rarely reported and its biomechanics are still unclear. MATERIALS AND METHODS: Six fresh cadaveric cervical spine specimens were each tested as an Intact model, then modified and tested as an Instability model (unstable odontoid fractures), and then as 3 internal fixation models, including C1-2 PSR, C1-2 pedicle screw-rod+horizontal rod-rod crosslink (C1-2 PSR+ hR-R CL), C1-2 pedicle screw-rod+horizontal screw-screw crosslink (C1-2 PSR+ hS-S CL). The ROM of the C1-2 segments was measured by applying 1.5 nm load in 6 loading conditions, including flexion-extension (FE), left and right lateral bending (LB), and left and right axial rotation (AR). RESULTS: The C1-2 PSR+hR-R CL and C1-2 PSR+hS-S CL models, respectively, showed 60% and 75% lower ROM than the C1-2 PSR model in LB and AR conditions ( P <0.05). ROM was comparable between the C1-2 PSR+hR-R CL and the C1-2 PSR+hS-S CL models in all loading conditions ( P >0.05). CONCLUSION: Both types of crosslinks showed superior C1-2 stability under LB and AR conditions than PSR without crosslinks. The C1-2 segment stability was comparable between the 2 types of crosslinks themselves.

Structure-Guided Engineering of a Protease to Improve Its Activity under Cold Conditions.

Bacillus proteases commonly exhibit remarkably reduced activity under cold conditions. Herein, we employed a tailored combination of a loop engineering strategy and iterative saturation mutagenesis method to engineer two loops for substrate binding at the entrance of the substrate tunnel of a protease (bcPRO) from Bacillus clausii to improve its activity under cold conditions. The variant MT6 (G95P/A96D/S99W/S101T/P127S/S126T) exhibited an 18.3-fold greater catalytic efficiency than the wild-type (WT) variant at 10 °C. Molecular dynamics simulations and dynamic tunnel analysis indicated that the introduced mutations extended the substrate-binding pocket volume and facilitated extra interactions with the substrate, promoting catalysis through binding in a more favorable conformation. This study provides insights and strategies relevant to improving the activities of proteases and supplies a novel protease with enhanced activity under cold conditions for the food industry to maintain the initial flavor and color of food and reduce energy consumption.

Could extended laminectomy effectively prevent spinal cord injury due to spinal shortening after 3-column osteotomy?

OBJECTIVE: To explore whether the laminectomy extension can effectively prevent spinal cord injury (SCI) due to spinal shortening after 3-column osteotomy in goat models. METHODS: A total of twenty healthy goats were included and done with 3-column osteotomy of T13 and L1 under the somatosensory evoked potential (SSEP) monitoring. The samples were divided into two groups. The first group underwent regular laminectomy while the second group underwent an extended laminectomy with an extra 10 mm-lamina cranial to L2. The SSEP measured after 3-column osteotomy was set as the baseline, and the SSEP decreased by 50% from the baseline amplitude and/or delayed by 10% relative to the baseline peak latency was set as positive results, which indicated spinal cord injury. The vertebral column was gradually shortened until the SSEP monitoring just did not show a positive result. The height of the initial osteotomy gap (the distance from the lower endplate of T12 to the upper endplate of L2), the shortened distance (△H), the number of spinal cord angulated and the changed angle of the spinal cord (△α) were measured and recorded in each group. Neurological function was evaluated by the Tarlov scores on day 2 postoperatively. RESULTS: All the goats except one of the first group due to changes in the SSEP during the osteotomy were included and analyzed. In the first group, the height of the initial osteotomy segment and the safe shortening distances were 61.6 ± 2.6 mm and 35.2 ± 2.6 mm, respectively; the spinal cord of 5 goats was angulated (46.4 ± 6.6°), the other four goats were kinked and not angulated. In the second group, the height of the initial osteotomy segment and the safe shortening distances were 59.8 ± 1.5 mm and 43.3 ± 1.2 mm, respectively, and the spinal cord of ten goats were angulated (97.6 ± 7.2°). There was no significant difference in the height of the initial osteotomy segment between the two groups by using Independent-Samples T-Test, P = 0.095 (P > 0.05); there were significant difference in the safe shortening distance and the changed angle of the spinal cord between the two groups by using Independent-Samples T-Test (both [Formula: see text]H and [Formula: see text]α of P < 0.001), the difference between their mean were 8.1 mm and 51.2°. Significant difference was found in the number of spinal cord angulation between the two groups through Fisher's exact test (5/9 vs. 10/10, P = 0.033). CONCLUSIONS: An additional resection of 10 mm-lamina cranial to L2 showed the satisfactory effect in alleviating SCI after 3-column osteotomy. Timely and appropriate extend laminectomy could be a promising therapeutic strategy for SCI attributable to facilitating spinal cord angulation rather than spinal cord kinking and increasing the safe shortening distance.

Induced membrane technique in the treatment of infected tibial bone defect: A retrospective study.

To investigate the effect of the induced membrane technique (IMT) in the treatment of infected tibial bone defect. IMT is a 2-stage procedure dedicated to reconstruction of bone defects of the limbs. Treating injuries of the tibia characterized by segmental bone loss, severe damage to the soft tissue, and a conjoining infection is a challenge using IMT. A retrospective study was performed among the patients treated using IMT for infected tibial bone defect between 2017 and 2020. The complications were recorded, and the bone defect union and the functional results were evaluated by Paley method. All patients were followed up for at least 1 year. We included 12 patients (11 males) with a mean age of 44.5 years (range 19-65). The mean length of bone defect was 26.7 mm (range 10-60). The mean interval between the stage 1 and the stage 2 of the procedure was 11.8 weeks (range 4-32). At a mean follow-up of 18.08 months (range 12-32), bone union was achieved in all cases in a mean time of 8 months (range 5-16) without infection recurrence, where 1 patient received additional bone grafting. The joint function recovered well for the patients and the rate of functionally excellent and good results was 9/12. IMT in the treatment of infected tibial bone defect offers the advantages of simple operation, use of a smaller amount of autograft bone, and low recurrence rate of infection.

Management of Unstable C1 Fractures Involving the Lateral Mass: Posterior C1-C2 Screw-Rod Fixation and Fusion.

BACKGROUND Although most unstable C1 fractures can be effectively treated either by conservative treatment with external immobilization or by surgical procedure of C1-ring osteosynthesis, those fractures involving the lateral mass are likely to lead to traumatic arthritis and persistent neck pain. Specific reports of treatment of unstable C1 fractures involving the lateral mass are still scarce. We therefore present this report to evaluate the effectiveness of posterior C1-C2 screw-rod fixation and fusion for unstable C1 fractures involving the lateral mass. MATERIAL AND METHODS From June 2009 to June 2016 in our hospital, 16 cases were diagnosed with C1 fractures involving the lateral mass and treated by posterior C1-C2 screw-rod fixation and fusion from June 2009 to June 2016. The patients' clinical data were retrospectively analyzed. Preoperative and postoperative images were taken to evaluate cervical sequence, location of screws, and bone fusion. Neurological status and neck pain levels were evaluated clinically on follow-up. RESULTS All patients underwent surgery successfully. The mean follow-up duration was 15.3±4.9 months (range 9-24 months). All patients obtained satisfying clinical outcomes with good neck pain alleviation, appropriate screw placement, and reliable bone fusion. None of the patients developed vascular or neurological complications during the operation or follow-up. CONCLUSIONS Posterior C1-C2 screw-rod fixation and fusion is an effective management for unstable C1 fractures involving the lateral mass. This operation can provide reliable stabilization and satisfactory bone fusion.

Incidences, causes and risk factors of unplanned reoperation within 30 days of craniovertebral junction surgery: a single-center experience.

PURPOSE: To investigate the incidences, causes, and risk factors for unplanned reoperation within 30 days of craniovertebral junction (CVJ) surgery. METHODS: From January 2002 to December 2018, a retrospective analysis of patients who underwent CVJ surgery at our institution was conducted. The demographics, history of the disease, medical diagnosis, approach and type of operation, surgery duration, blood loss, and complications were recorded. Patients were divided into the no-reoperation group and the unplanned reoperations group. Comparison between two groups in noted parameters was analyzed to identify the prevalence and risk factors of unplanned revision and a binary logistic regression was performed to confirm the risk factors. RESULTS: Of 2149 patients included, 34(1.58%) required unplanned reoperation after the initial surgery. The causes for unplanned reoperation contained wound infection, neurologic deficit, improper screw placement, internal fixation loosens, dysphagia, cerebrospinal fluid leakage, and posterior fossa epidural hematomas. No statistical difference was found in demographics between two groups (P > 0.05). The incidence of reoperation of OCF was significantly higher than that of posterior C1-2 fusion (P = 0.002). In terms of diagnosis, the reoperation rate of CVJ tumor patients was significantly higher than that of malformation patients, degenerative disease patients, trauma patients, and other patients (P = 0.043). The binary logistic regression confirmed that different disease, fusion segment (posterior) and surgery time were independent risk factors. CONCLUSIONS: The unplanned reoperation rate of CVJ surgery was 1.58% and the major causes were implant-related failures and wound infection. Patients with posterior occipitocervical fusion or diagnosed with CVJ tumors had an increased risk of unplanned reoperation.

The use of a novel reduction plate in transoral anterior C1-ring osteosynthesis for unstable atlas fractures.

Background: Transoral anterior C1-ring osteosynthesis has been reported as an effective treatment for unstable atlas fracture, which aims to preserve important C1-C2 motion. However, previous studies have shown that the anterior fixation plates used in this technique were not suitable for the anterior anatomy of the atlas and lacked an intraoperative reduction mechanism. Objective: This study aims to evaluate the clinical effects of a novel reduction plate used in transoral anterior C1-ring osteosynthesis for unstable atlas fractures. Methods: 30 patients with unstable atlas fractures treated by this technique from June 2011 to June 2016 were included in this study. The patients' clinical data and radiographs were reviewed, and the reduction of the fracture, internal fixation placement, and bone fusion were assessed using pre- and postoperative images. The patients' neurological function, rotatory range of motion, and pain levels were evaluated clinically during follow-up. Results: All 30 surgeries were successfully performed, and the average follow-up duration was 23.5 ± 9.5 months (range 9-48 months). One patient suffered atlantoaxial instability during the follow-up and was treated with posterior atlantoaxial fusion. The remaining 29 patients had satisfactory clinical outcomes, with ideal fracture reduction, good screw and plate placement, well-preserved range of motion, neck pain alleviation and solid bone fusion. There were no vascular or neurological complications during the operation or follow-up. Conclusions: The use of this novel reduction plate in transoral anterior C1-ring osteosynthesis is a safe and effective surgical option in the treatment of unstable atlas fractures. This technique offers an immediate intraoperative reduction mechanism, which provides satisfactory fracture reduction, bone fusion, and preservation of C1-C2 motion.

A Novel Stepwise Technique for Safe and Effective Transoral Release of Irreducible Atlantoaxial Dislocation: A Retrospective Study of 201 Cases.

STUDY DESIGN: Retrospective cohort study. OBJECTIVE: To verify the clinical efficacy of a novel transoral stepwise release technique (TSRT) for the treatment of irreducible atlantoaxial dislocations (IAAD). SUMMARY OF BACKGROUND DATA: Anterior release for IAAD remains challenging, with a 3.2 times higher complication rate than posterior release. However, there are some patients who cannot achieve successful reduction from a posterior approach and require the higher-risk anterior release. Our work presents a novel anterior release technique that aims to minimize iatrogenic injury and associated complications from an anterior release. MATERIALS AND METHODS: IAAD cases who were treated with TSRT were retrospectively studied. Primary outcomes included fusion rate, complications, and neurological function over the course of a minimum 1-year follow-up. Radiographic differences between preoperative and postoperative imaging were also considered. A preoperative prediction model for the actual release grade was developed using multivariate logistic regression based on demographic factors and the craniovertebral abnormalities identified on preoperative images, evaluating the need for higher-grade TSRT release. RESULTS: We included 201 IAAD cases, with 42% (84/201) demonstrating degeneration of the atlantoaxial joint or anterior-hook-like dens. The reduction was achieved in all cases, with 80% (160/201) of cases only requiring relatively low-grade or grade I types TSRT release. Degeneration of the atlantoaxial joint was significantly associated with the need for higher-grade TSRT release (odds ratio:16.68, CI: 2.91-94.54, P = 0.002). The overall complication rate was 4.5% (9/201). Over the course of follow-up, the fusion rate reached 98.5%, and the American Spinal Injury Association and Japanese Orthopedic Association scores were significantly improved to 97.28 and 16.25 ( P < 0.01 and P < 0.01), respectively. CONCLUSION: This study demonstrated that our novel TSRT anterior release technique demonstrated complication rates similar to those published in the literature for posterior release. TSRT can be used as an alternative to posterior release techniques for refractory cases or when a posterior approach is not considered viable.

A comprehensive analysis and literature review of vertebral artery variation in craniovertebral junction using three-dimensional computed tomography angiography.

PURPOSE: To describe vertebral artery (VA) variation in patients with or without osseous anomalies at congenital craniovertebral junction (CVJ). METHODS: In the present study, we retrospectively analyzed 258 patients with VA variation who underwent three-dimensional computed tomography angiography (3D CTA) in our hospital from March 2017 to October 2019. RESULTS: Among 258 patients, 180 were accompanied by skeleton structural malformation, including 105 cases of occipital ossification of the atlas, 8 cases of the bipartite atlas, 7 cases of hypoplasia of the posterior arch of the atlas, 45 cases of C2/3 congenital fusion, 2 cases of C2/3/4 congenital fusion, and 13 cases of congenital os odontoid. VA variation was divided into type A (VA variation in the CVJ area without osseous anomalies) and type B (VA variation in the CVJ area with osseous anomalies). There are totally 10 subtypes, including type A1 (atlas occipitalization with VA entrance approach close to middle line, 20.2%); type A2 (atlas occipitalization with VA entrance approach far from middle line, 30.2%); type A3 (first intersegmental VA in C1-C2, 1.9%); type A4 (fenestration of the VA, 2.3%); type A5 (VA bulging type, 6.6%); type A6 (VA exposures with the absence of the posterior atlas arch, 2.3%); type A7 (C2 inner wall type, 0.4%); type A8 (single vertebral artery, 2.3%); type B1 (posterior ponticuli, 2.7%); and type B2 (high-riding VA, 31.4%). CONCLUSION: This study is expected to take the lead in the most comprehensive classification of VA variation.

Research on the identification and detection of field pests in the complex background based on the rotation detection algorithm.

As a large agricultural and population country, China's annual demand for food is significant. The crop yield will be affected by various natural disasters every year, and one of the most important factors affecting crops is the impact of insect pests. The key to solving the problem is to detect, identify and provide feedback in time at the initial stage of the pest. In this paper, according to the pest picture data obtained through the pest detection lamp in the complex natural background and the marking categories of agricultural experts, the pest data set pest rotation detection (PRD21) in different natural environments is constructed. A comparative study of image recognition is carried out through different target detection algorithms. The final experiment proves that the best algorithm for rotation detection improves mean Average Precision by 18.5% compared to the best algorithm for horizontal detection, reaching 78.5%. Regarding Recall, the best rotation detection algorithm runs 94.7%, which is 7.4% higher than horizontal detection. In terms of detection speed, the rotation detection time of a picture is only 0.163s, and the model size is 66.54MB, which can be embedded in mobile devices for fast detection. This experiment proves that rotation detection has a good effect on pests' detection and recognition rate, which can bring new application value and ideas, provide new methods for plant protection, and improve grain yield.

Extreme lateral interbody fusion (XLIF) approach for L5-S1: Preliminary experience.

Study Design: Technical report. Objective: Evaluate technical feasibility of extreme lateral interbody fusion (XLIF) at the L5-S1 level and provide an elaborate description of the surgical technique. Summary of Background Data: With the development of surgical techniques, the indications for oblique lumbar interbody fusion (OLIF) surgery have been broadened to the L5/S1 segment. However, this technique also has limitations. Different from OLIF, the L5/S1 segment used to be considered the main contraindication for XLIF. To date, no authors have reported the application of XLIF at the L5/S1 level. Methods: Only patients whose preoperative lumbar MRI showed the position of the psoas major muscles and blood vessels at the L5/S1 level were similar to those seen at supra-L5 levels were seleted. By folding the operating table, the iliac crest was moved downward to expose the L5/S1 intervertebral space during the operation. The remaining surgical procedures were consistent with routine XLIF surgery. Results: 8 patients successfully underwent XLIF at the L5/S1 level. The L5/S1 disk spaces were always exposed sufficiently for disk preparation and cage insertion. The post operative radiographs showed a satisfactory L5/S1 reconstruction with good cage position. Only 1 patient (12.5%) felt thigh numbness, and the symptoms gradually resolved after surgery and were no longer present in a month. There were no cases of psoas hematoma, retrograde ejaculation or vascular injury. The postoperative VAS score showed that all the patients achieved satisfactory results. Conclusions: XLIF at L5-S1 is feasible in strictly selected cases after thorough preoperative preparation and careful intraoperative procedures. However, we did not recommend XLIF as a routine surgical option at the L5/S1 level.

Research on pharyngeal bacterial flora in transoral atlantoaxial operation and the postoperative follow-up study.

OBJECTIVES: To study the changes of bacterial flora after a series of preoperative oral disinfection and the postoperative recovery of nerve function of patients with craniovertebral junction disorders who were treated with transoral approach operations. METHODS: This research analyzed 20 cases collected from October 2009 to May 2010. All these patients were with CVJ disorders, including 8 males and 12 females, aged 2 to 66 (38.1 on average), and they were all treated with transoral approach operations. The mucosa samples of the posterior pharyngeal wall were sent for bacteria culture. These samples were collected by sterile cotton swabs at four crucial points, including 3 days before operation/before gargling, 3 days after continuous gargling/after anesthesia intubation on the day of operation, after intraoperative cleaning and washing of the mouth, and after intraoperative iodophor immersion. The microflora was stained by means of smear and further counted after an investigation by microscope. The neural function of patients was evaluated by the ASIA classification and the JOA scores. All patients but two with posterior stabilization performed respectively underwent transoral atlantoaxial reduction plate (TARP) fixation consecutively in the same sitting. A regular reexamination of cervical vertebra with lateral and open mouth X-ray, CT and MRI was conducted after operation to evaluate the reduction of atlantoaxial dislocation, internal fixation position, bone graft fusion, inflammatory lesions and tumor recurrence. RESULTS: This bacteriological research showed that the mucosa of the posterior pharyngeal wall of all the patients was in a sterile state after a series of oral preoperative preparations and intraoperative iodophor disinfection, which was considered as type I incision. The bacterial culture results of the mucosa samples of the posterior pharyngeal wall collected at different time points showed significant differences (χ2 = 42.762, P = 0.000). All the patients had improvement in ASIA, and their neural functions were improved to different levels after operation. There was a significant difference in JOA scores before and after operation (t = 8.677, P = 0.000). Postoperative imaging examination showed that the atlantoaxial screw position was good and firm, and the CVJ disorders were treated appropriately. CONCLUSION: It is safe and effective to cut the posterior pharyngeal muscle layer and implant internal fixation by means of transoral approach.

Electroluminescence from Silicon-Based Light-Emitting Devices with Erbium-Doped ZnO Films: Strong Enhancement Effect of Titanium Codoping.

We report on the visible and near-infrared electroluminescence (EL) from the light-emitting device (LED) based on the erbium (Er)-doped ZnO (ZnO:Er)/SiO2/n+-Si heterostructure, wherein an ∼10 nm thick SiO2 intermediate layer serves as the energy plateau for producing hot electrons, which come from n+-Si via the trap-assisted tunneling mechanism. These hot electrons excite the doped Er3+ ions by inelastic collision, enabling the Er-related EL from the aforementioned LED. More importantly, by means of codoping the appropriate content of titanium (Ti) into the ZnO:Er film, the aforementioned Er-related emissions can be significantly enhanced. The density functional theory calculations indicate that the Ti-codoping improves rather than degrades the symmetry of the crystal field around the optically active Er3+ ions, hence not increasing the intra-4f transition probabilities of Er3+ ions. However, it is found that Ti-codoping nearly eliminates the segregation of Er3+ ions near the ZnO/SiO2 interface. Moreover, Ti-codoping is derived to result in a number of Zn vacancies, which provide the sites for incorporating Er3+ ions in the ZnO matrix. For the above two reasons, the Ti-codoping promotes the incorporation of optically active Er3+ ions into the ZnO matrix, thus enhancing the EL from the aforementioned LED.