Ring-Opening Polymerization of rac-ß-Butyrolactone Promoted by New Tetradentate Thioether-Amide Ligand-Type Zinc Complexes.

In this work, thioether-amide ligands featuring a combination of hard amide groups with soft donor groups have been employed to develop new zinc catalysts for the ring-opening polymerization of cyclic esters. All complexes were prepared in high yields through alkane elimination reactions with diethyl zinc and characterized using nuclear magnetic resonance (NMR) spectroscopy. Density functional theory (DFT) characterization provided insight into the parameters that influence catalytic activity, such as steric hindrance at the metal center, Lewis acidity and electronic density of thioether-amide ligands. In the presence of one equivalent of isopropanol, all complexes were active in the ring-opening polymerization of rac-ß-butyrolactone. Quantitative conversion of 100 monomer equivalents was achieved within 1 h at 80 °C in a toluene solution. Number-average molecular weights increased linearly with monomer conversion; the values were in optimal agreement with those expected, and polydispersity index values were narrow and relatively constant throughout the course of polymerization. The most active complex was also effective in the ring-opening polymerization of ε-caprolactone and L-lactide. To propose a reliable reaction path, DFT calculations were undertaken. In the first step of the reaction, the acidic proton of the alcohol is transferred to the basic nitrogen atom of the amide ligand coordinated to the zinc ion. This leads to the alcoholysis of the Zn-N bond and the formation of an alcoholate derivative that starts the polymerization. In subsequent steps, the reaction follows the classical coordination-insertion mechanism.

Carbon Dioxide Hydrogenation to Formate Catalyzed by a Neutral, Coordinatively Saturated Tris-Carbonyl Mn(I)-PNP Pincer-Type Complex.

CO2 catalytic hydrogenation to formate was achieved (TONmax =ca. 3800) in the presence of the neutral, halide-free, coordinatively saturated tris(carbonyl) manganese pincer-type complex [Mn(PNP)(CO)3 ], bearing a diarylamido pincer-type PNP ligand, using DBU as base and LiOTf as Lewis acid additive, under mild reaction conditions (60 bar, 80 °C). DFT calculations suggest that the precatalyst activation key step occurs by intermolecular, base assisted dihydrogen heterolytic splitting rather than by the expected ligand-assisted intramolecular MLC-type mechanism.

The Role of Inverted Ligand Field in the Electronic Structure and Reactivity of Octahedral Formal Platinum (IV) Complexes.

Platinum complexes are ubiquitous in chemistry and largely used as catalysts or as precursors in drug chemistry, thus a deep knowledge of their electronic properties may help in planning new synthetic strategies or exploring new potential applications. Herein, the electronic structure of many octahedral platinum complexes is drastically revised especially when they feature electronegative elements such as halogens and chalcogens. The investigation revealed that in most cases the five d platinum orbitals are invariably full, thus the empty antibonding orbitals, usually localized on the metal, are mainly centered on the ligands, suggesting a questionable assignment of formal oxidation state IV. The analysis supports the occurrence of the inverted ligand field theory in all cases with the only exceptions of the Pt-F and Pt-O bonding. The trends for the molecular complexes are mirrored also by the density of states plots of extended structures featuring octahedral platinum moieties in association with chalcogens atoms. Finally, the oxidative addition of a Se-Cl linkage to a square platinum complex to achieve an octahedral moiety has been revised in the framework of the inverted ligand field.

Halogen-Bonding-Mediated Radical Reactions: The Unexpected Behavior of Piperazine-Based Dithiooxamide Ligands in the Presence of Diiodine.

N,N'-Dialkylpiperazine-2,3-dithiones (R2pipdt) were recognized as a class of hexa-atomic cyclic dithiooxamide ligands with peculiar charge-transfer donor properties toward soft electron-acceptors such as noble metal cations and diiodine. The latter interaction is nowadays better described as halogen bonding. In the reaction with diiodine, R2pipdt unexpectedly provides the corresponding triiodide salts, differently from the other dithiooxamides, which instead typically achieve ligand·nI2 halogen-bonded adducts. In this paper, we report a combined experimental and theoretical study that allows elucidation of the nature of the cited products and the reasons behind the unpredictable behavior of these ligands. Specifically, low-temperature single-crystal X-ray diffraction measurements on a series of synthetically obtained R2pipdt (R = Me, iPr, Bz)/I3 salts, complemented by neutron diffraction experiments, were able to experimentally highlight the formation of [R2pipdtH]+ cations with a -S-H bond on the dithionic moiety. Differently, with R = Ph, a benzothiazolylium cation, resulting from an intramolecular condensation reaction of the ligand, is obtained. Based on density functional theory (DFT) calculations, a reasonable reaction mechanism where diiodine plays the fundamental role of promoting a halogen-bonding-mediated radical reaction has been proposed. In addition, the comparison of combined experimental and computational results with the corresponding reactions of N,N'-dialkylperhydrodiazepine-2,3-dithione (R2dazdt, a hepta-atomic cyclic dithiooxamide), which provide neutral halogen-bonded adducts, pointed out that the difference in the torsion angle of the free ligands represents the structural key factor in determining the different reactivities of the two systems.

Protonated Porphyrins: Bifunctional Catalysts for the Metal-Free Synthesis of N-Alkyl-Oxazolidinones.

The protonation of commercially available porphyrin ligands yields a class of bifunctional catalysts able to promote the synthesis of N-alkyl oxazolidinones by CO2 cycloaddition to corresponding aziridines. The catalytic system does not require the presence of any Lewis base or additive, and shows interesting features both in terms of cost effectiveness and eco-compatibility. The metal-free methodology is active even with a low catalytic loading of 1 % mol, and the chemical stability of the protonated porphyrin allowed it to be recycled three times without any decrease in performance. In addition, a DFT study was performed in order to suggest how a simple protonated porphyrin can mediate CO2 cycloaddition to aziridines to yield oxazolidinones.

Computational, Mechanistic, and Experimental Insights into Regioselective Catalytic C-C Bond Activation in Linear 1-Aza-[3]triphenylene.

C-C bond activation by transition metal complexes in ring-strained compounds followed by annulation with unsaturated compounds is an efficient approach to generate structurally more complex compounds. However, the site of catalytic C-C bond activation is difficult to predict in unsymmetrically substituted polycyclic systems. Here, we report a study on the (regio)selective catalytic cleavage of selected C-C bonds in 1-aza-[3]triphenylene, followed by annulation with alkynes, forming products with extended π-conjugated frameworks. Based on density functional theory (DFT) calculations, we established the stability of possible transition metal intermediates formed by oxidative addition to the C-C bond and thus identified the likely site of C-C bond activation. The computationally predicted selectivity was confirmed by the following experimental tests for the corresponding Ir-catalyzed C-C cleavage reaction followed by an alkyne insertion that yielded mixtures of two mono-insertion products isolated with yields of 34-36%, due to the close reactivity of two bonds during the first C-C bond activation. Similar results were obtained for twofold Ir- or Rh-catalyzed insertion reactions, with higher yields of 72-77%. In a broader context, by combining DFT calculations, which provided insights into the relative reactivity of individual C-C bonds, with experimental results, our approach allows us to synthesize previously unknown pentacyclic azaaromatic compounds.

Inverted Ligand Field in a Pentanuclear Bow Tie Au/Fe Carbonyl Cluster.

Gold chemistry has experienced in the last decades exponential attention for a wide spectrum of chemical applications, but the +3 oxidation state, traditionally assigned to gold, remains somewhat questionable. Herein, we present a detailed analysis of the electronic structure of the pentanuclear bow tie Au/Fe carbonyl cluster [Au{η2-Fe2(CO)8}2]- together with its two one-electron reversible reductions. A new interpretation of the bonding pattern is provided with the help of inverted ligand field theory. The classical view of a central gold(III) interacting with two [Fe2(CO)8]2- units is replaced by Au(I), with a d10 gold configuration, with two interacting [Fe2(CO)8]- fragments. A d10 configuration for the gold center in the compound [Au{η2-Fe2(CO)8}2]- is confirmed by the LUMO orbital composition, which is mainly localized on the iron carbonyl fragments rather than on a d gold orbital, as expected for a d8 configuration. Upon one-electron stepwise reduction, the spectroelectrochemical measurements show a progressive red shift in the carbonyl stretching, in agreement with the increased population of the LUMO centered on the iron units. Such a trend is also confirmed by the X-ray structure of the direduced compound [Au{η1-Fe2(CO)8}{η2-Fe2(CO)6(µ-CO)2}]3-, featuring the cleavage of one Au-Fe bond.

A Reinterpretation of the Imidazolate Au(I) Cyclic Trinuclear Compounds Reactivity with Iodine and Methyl Iodide with the Perspective of the Inverted Ligand Field Theory.

Coinage metal cyclic trinuclear compounds (CTCs) are an emerging class of metal coordination compounds that are valuable for many fine optoelectronic applications, even though the reactivity dependence by the different bridging ligands remains somewhat unclear. In this work, to furnish some hints to unravel the effect of substituents on the chemistry of Au(I) CTCs made of a specific class of bridging ligand, we have considered two imidazolate Au(I) CTCs and the effect of different substituents on the pyrrolic N atoms relative to classic metal oxidations with I2 or by probing electrophilic additions. Experimental suggestions depict a thin borderline between the addition of MeI to the N-methyl or N-benzyl imidazolyl CTCs, which afford the oxidized CTC in the former and the ring opening of the CTC and the formation of carbene species in the latter. Moreover, the reactions with iodine yield to the oxidation of the metal centers for the former and just of a metal center in the latter, even in molar excess of iodine. The analysis of the bond distances in the X-ray crystal structures of the oxidized highlights that Au(III)-C and Au(III)-N bonds are longer than observed for Au(I)-C and Au(I)-N bonds, as formally not expected for Au(III) centers. Computational studies converge on the attribution of these discrepancies to an additional case of inverted ligand field (ILF), which solves the question with a new interpretation of the Au(I)-ligand bonding in the oxidized CTCs, which furnishes a new interpretation of the Au(I)-ligand bonding in the oxidized CTCs, opening a discussion about addition/oxidation reactions. Finally, the theoretical studies outputs depict energy profiles that are compatible with the experimental results obtained in the reaction of the two CTCs toward the addition of I2, MeI, and HCl.

Easy and fast in situ functionalization of exfoliated 2D black phosphorus with gold nanoparticles.

Heterostructures of single- and few-layer black phosphorus (2D bP) functionalized with gold nanoparticles (Au NPs) have been recently reported in the literature, exploiting their intriguing properties and biocompatibility for catalytic, therapeutical and diagnostic applications. However, a deeper insight on the structural and electronic properties at the interface of the 2D bP/Au NP heterostructure is still lacking. In this work, 2D bP is functionalized with Au nanoparticles (NPs) through in situ deposition-precipitation heterogeneous reaction. The smallest realized Au NPs have a diameter around 10 nm as revealed by atomic-force and scanning electron microscopy, and are partially positively charged as revealed by X-ray Photoelectron Spectroscopy (XPS). XPS, UV-vis and Raman spectroscopy, supported by density functional theory (DFT) calculations, confirmed that while the structural and electronic properties of 2D bP are overall preserved, a soft-pairing between P atoms at the surface of 2D bP and Au atoms at the surface of Au NPs occurs, leading to a partial charge transfer at the 2D bP/Au interface, with a positive charge being localized on the Au atoms directly bonded to 2D bP. DFT calculations also predicted a band gap lowering, by 0.8 eV, for phosphorene functionalized with a tetranuclear Au cluster. Larger effects are expected as the Au cluster nuclearity (and coverage) increases.

Interlayer Coordination of Pd-Pd Units in Exfoliated Black Phosphorus.

The chemical functionalization of 2D exfoliated black phosphorus (2D BP) continues to attract great interest, although a satisfactory structural characterization of the functionalized material has seldom been achieved. Herein, we provide the first complete structural characterization of 2D BP functionalized with rare discrete Pd2 units, obtained through a mild decomposition of the organometallic dimeric precursor [Pd(η3-C3H5)Cl]2. A multitechnique approach, including HAADF-STEM, solid-state NMR, XPS, and XAS, was used to study in detail the morphology of the palladated nanosheets (Pd2/BP) and to unravel the coordination of Pd2 units to phosphorus atoms of 2D BP. In particular, XAS, backed up by DFT modeling, revealed the existence of unprecedented interlayer Pd-Pd units, sandwiched between stacked BP layers. The preliminary application of Pd2/BP as a catalyst for the hydrogen evolution reaction (HER) in acidic medium highlighted an activity increase due to the presence of Pd2 units.

Odorant Monitoring in Natural Gas Pipelines Using Ultraviolet-Visible Spectroscopy.

The remote, timely and in-field detection of sulfured additives in natural gas pipelines is a challenge for environmental, commercial and safety reasons. Moreover, the constant control of the level of odorants in a pipeline is required by law to prevent explosions and accidents. Currently, the detection of the most common odorants (THT = tetrahydrothiophane; TBM = tertiary butyl mercaptan) added to natural gas streams in pipelines is made in situ by using portable gas chromatography apparatuses. In this study, we report the analysis of the ultraviolet spectra obtained by a customized ultraviolet spectrophotometer, named Spectra, for the in-field detection of thiophane and tertiary butyl mercaptan. Spectra were conceived to accomplish the remote analysis of odorants in the pipelines of the natural gas stream through the adoption of technical solutions aimed to adapt a basic bench ultraviolet spectrophotometer to the in-field analysis of gases. The remotely controlled system acquires spectra continuously, performing the quantitative determination of odorants and catching systemic or accidental variations of the gaseous mixture in different sites of the pipeline. The analysis of the experimental spectra was carried out also through theoretical quantum mechanical approaches aimed to detect and to correctly assign the nature of the intrinsic electronic transitions of the two odorants, thiophane and tertiary butyl mercaptan, that cause the ultraviolet absorptions. So far, these theoretical aspects have never been studied before. The absorption maxima of thiophane and tertiary butyl mercaptan spectra were computationally simulated through the usage of selected molecular models with satisfactory results. The good matches between the experimental and theoretical datasets corroborate the reliability of the collected data. During the tests, unexpected pollutants and accidental malfunctions have been detected and also identified by Spectra, making this instrument suitable for many purposes.

On the comparison of oxygen and sulfur transfer reactivities in phosphine and phosphorene: the case of R3Sb(X) carriers (X = O or S).

Functionalization is one of the most powerful tools in materials science for the development of new and innovative materials with tailored properties purposefully designed to enhance the overall stability of the system. This is particularly true for exfoliated black phosphorus, which suffers from easy decomposition by air and moisture, hampering its highly desirable applications, especially in electronics. The present work suggests an innovative approach to the functionalization process of this 2D-material based on the selective introduction of chalcogen atoms on the material surface through a reaction with suitable molecular precursors such as stibine chalcogenides (R3Sb(X), X = O or S; R = organyl group). These molecules may readily act as chalcogen-transfer agents and, upon releasing the chalcogen atom atop the bP surface, leave stable stibines (R3Sb) as byproducts, which may be easily removed from the functionalized bP surface. The work provides an overview of all the possible structural, electronic and energy aspects associated with the chalcogen-atom transfer from the stibine to phosphorus based compounds, exemplified by trialkyl phosphines and single layer exfoliated black phosphorus, i.e. phosphorene, Pn. In both cases the oxygen transfer is more exergonic than the sulfur transfer, with the associated free energy barrier for the phosphine process being higher. Although the sulfur transfer for the Pn is found to be endergonic (ca. +3.6 kcal mol-1), the process may surely occur at high temperature. The evolution of the band structure upon the chalcogen transfer has been depicted in detail.

Indoles from Alkynes and Aryl Azides: Scope and Theoretical Assessment of Ruthenium Porphyrin-Catalyzed Reactions.

A symbiotic experimental/computational study analyzed the Ru(TPP)(NAr)2 -catalyzed one-pot formation of indoles from alkynes and aryl azides. Thirty different C3 -substituted indoles were synthesized and the best performance, in term of yields and regioselectivities, was observed when reacting ArC≡CH alkynes with 3,5-(EWG)2 C6 H3 N3 azides, whereas the reaction was less efficient when using electron-rich aryl azides. A DFT analysis describes the reaction mechanism in terms of the energy costs and orbital/electronic evolutions; the limited reactivity of electron-rich azides was also justified. In summary, PhC≡CH alkyne interacts with one NAr imido ligand of Ru(TPP)(NAr)2 to give a residually dangling C(Ph) group, which, by coupling with a C(H) unit of the N-aryl substituent, forms a 5+6 bicyclic molecule. In the process, two subsequent spin changes allow inverting the conformation of the sp2 C(Ph) atom and its consequent electrophilic-like attack to the aromatic ring. The bicycle isomerizes to indole via a two-step outer sphere H-migration. Eventually, a 'Ru(TPP)(NAr)' mono-imido active catalyst is reformed after each azide/alkyne reaction.

Noncovalent Functionalization of 2D Black Phosphorus with Fluorescent Boronic Derivatives of Pyrene for Probing and Modulating the Interaction with Molecular Oxygen.

We studied the chemical-physical nature of interactions involved in the formation of adducts of two-dimensional black phosphorus (2D BP) with organoboron derivatives of a conjugated fluorescent molecule (pyrene). Time-resolved fluorescence spectroscopy showed a stabilization effect of 2D BP on all derivatives, in particular for the adducts endowed with the boronic functionalities. Also, a stronger modulation of the fluorescence decay with oxygen was registered for one of the adducts compared to the corresponding organoboron derivative alone. Nuclear magnetic resonance experiments in suspension and density functional theory simulations confirmed that only noncovalent interactions were involved in the formation of the adducts. The energetic gain in their formation arises from the interaction of P atoms with both C atoms of the pyrene core and the B atom of the boronic functionalities, with a stronger contribution from the ester with respect to the acid one. The interaction results in the lowering of the band gap of 2D BP by around 0.10 eV. Furthermore, we demonstrated through Raman spectroscopy an increased stability toward oxidation in air of 2D BP in the adducts in the solid state (more than 6 months). The modification of the electronic structure at the interface between 2D BP and a conjugated organic molecule through noncovalent stabilizing interactions mediated by the B atom is particularly appealing in view of creating heterojunctions for optoelectronic, photonic, and chemical sensing applications.

A Perspective on Recent Advances in Phosphorene Functionalization and Its Applications in Devices.

Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in materials science. The physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in the preparation, functionalization, and use of phosphorene and its decorated derivatives. We discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behavior of black phosphorus, as well as its decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and the new results collected in our laboratories.

Metal-Assisted Opening of Intact P4 Tetrahedra.

The reactivity of ruthenium and manganese complexes bearing intact white phosphorus in the coordination sphere was investigated towards the low-valent transition-metal species [Cp'''Co] (Cp'''=η5 -C5 H2 -1,2,4-tBu3 ) and [L0 M] (L0 =CH[CHN(2,6-Me2 C6 H3 )]2 ; M=Fe, Co). Remarkably, and irrespective of the metal species, the reaction proceeds by the selective cleavage of two P-P edges and the formation of a square-planar cyclo-P4 ligand. The reaction products [{CpRu(PPh3 )2 }{CoCp'''}(µ,η1:4 -P4 )][CF3 SO3 ] (5), [{CpBIG Mn(CO)2 }2 {CoCp'''}(µ,η1:1:4 -P4 )] (6) and [{CpBIG Mn(CO)2 }2 {ML0 }(µ,η1:1:4 -P4 )] (CpBIG =C5 (C6 H4 nBu)5 ; L0 =CH[CHN(2,6-Me2 C6 H3 )]2 ; M=Fe (7 a), Co (7 b)), respectively, were fully characterized by single-crystal X-ray diffraction and spectroscopic methods. The electronic structure of the cyclo-P4 ligand in the complexes 5-7 is best described as a π-delocalized P4 2- system, which is further stabilized by two and three metal moieties, respectively. DFT calculations envisaged a potential intermediate in the reaction to form 5, in which a quasi-butterfly-shaped P4 moiety bridges the two metals and behaves as an η3 -coordinated ligand towards the cobalt center.

Modelling strategies for the covalent functionalization of 2D phosphorene.

This paper is a comparative outline of the potential acid-base adducts formed by an unsaturated main group or transition metal species and P atoms of phosphorene (Pn), which derives from black phosphorus exfoliation. Various possibilities of attaining a realistic covalent functionalization of the 2D material have been examined via DFT solid state calculations. The distribution of neighbor P atoms at one side of the sheet and the reciprocal directionalities of their lone pairs must be clearly understood to foreshadow the best possible acceptor reactants. Amongst the latter, the main group BH3 or I2 species have been examined for their intrinsic acidity, which favors the periodic mono-hapto anchoring at Pn atoms. The corresponding adducts are systematically compared with other molecular P donors from a phosphine to white phosphorus, P4. Significant variations emerge from the comparison of the band gaps in the adducts and the naked phosphorene with a possible electronic interpretation being offered. Then, the Pn covalent functionalization has been analyzed in relation to unsaturated metal fragments, which, by carrying one, two or three vacant σ hybrids, may interact with a different number of adjacent P atoms. For the modelling, the concept of isolobal analogy is important for predicting the possible sets of external coligands at the metal, which may allow the anchoring at phosphorene with a variety of hapticities. Structural, electronic, spectroscopic and energy parameters underline the most relevant pros and cons of some new products at the 2D framework, which have never been experimentally characterized but appear to be reasonably stable.

Catalytic Phosphite Hydrolysis under Neutral Reaction Conditions.

Cationic phosphametallocene-based platinum(II) aqua complexes were used as efficient precatalysts for the hydrolysis of aromatic and aliphatic tertiary phosphites under neutral reaction conditions at room temperature, leading to the selective cleavage of one P-O bond of the phosphite. NMR labeling experiments combined with stoichiometric model reactions and theoretical density functional theory calculations, performed with the appropriate model compounds, shed light on the operative catalytic cycle, which comprises intramolecular water molecule transfer to the cis-coordinated phosphite molecule.

The atomic level mechanism of white phosphorous demolition by di-iodine.

A detailed mechanism of the I2-induced transformation of white phosphorus into PI3 emerges from a DFT analysis. This multi-step process implies that at any stage one P-P and two I-I bonds cleavages, associated with the formation of two P-I bonds plus an in situ generated brand new I2 molecule. Significant electron transfer between the atoms is observed at any step, but the reactions are better defined as concerted rather than redox. Along the steepest descent to the product, no significant barrier is encountered except for the very first P4 activation, which costs +14.6 kcal mol-1. At the atomic level, one first I2 molecule, a typical mild oxidant, is first involved in a linear halogen bonding interaction (XB) with one P donor, while its terminal I atom is engaged in an additional XB adduct with a second I2. Significant electron transfer through the combined diatomics allows the external I atom of the dangling I3 grouping to convey electrons into the σ* level of one P-P bond with its consequent cleavage. This implies at some point the appearance of a six-membered ring, which alternatively switches its bonding and no-bonding interactions. The final transformation of the P2I4 diphosphine into two PI3 phosphines is enlightening also for the specific role of the I substituents. In fact, it is proved that an organo-diphosphine analogue hardly undergoes the separation of two phosphines, as reported in the literature. This is attributable to the particularly high donor power of the carbo-substituted P atoms, which prevents the concertedness of the reaction but favors charge separation in an unreactive ion pair.

Hierarchy of Supramolecular Arrangements and Building Blocks: Inverted Paradigm of Crystal Engineering in the Unprecedented Metal Coordination of Methylene Blue.

The aromatic methylene blue cation (MB+) shows unprecedented ligand behavior in the X-ray structures of the trigonal-planar (TP) complexes MBMCl2 (M = CuI, AgI). The two isostructural compounds were exclusively synthesized by grinding together methylene blue chloride and MCl solids. Only in the case of AuCl did the technique lead to a different, yet isoformular, AuI derivative with separated MB+ and AuCl2- counterions and no direct N-Au linkage. While the density functional theory (DFT) molecular modeling failed in reproducing the isolated Cu and Ag complexes, the solid-state program CRYSTAL satisfactorily provided for Cu the correct TP building block associated with a highly compact π stacking of the MB+ ligands. In this respect, the dispersion interactions, evaluated with the DFT functional, provide to the system an extra energy, which likely supports the unprecedented metal coordination of the MB+ cation. The feature seems governed by subtle chemical factors, such as, for instance, the selected metal ion of the coinage triad. Thus, the electronically consistent AuI ion does not form the analogous TP building block because of a looser supramolecular arrangement. In conclusion, while a given crystalline design is generally fixed by the nature of the building block, a peculiarly efficient supramolecular packing may stabilize an otherwise unattainable metal complex.