Implications of polystyrene and polyamide microplastics in the adsorption of sulfonamide antibiotics and their metabolites in water matrices.

Microplastics (MP) and antibiotics coexist in the environment and their combined exposure represents a source of increasing concern. MP may act as carriers of antibiotics because of their sorption capacity. Knowledge of the interactions between them may help improve understanding of their migration and transformation. In this work, the adsorption behaviour of a group of sulfonamides and their acetylated metabolites on different sizes of polyamide (PA) and polystyrene (PS) MP were investigated and compared. Sulfonamides were adsorbed on both MP (qmax up to 0.699 and 0.184 mg/g, for PA and PS, respectively) fitting to a linear isotherm model (R2 > 0.835). A low particle size and an acidic and salinity medium significantly enhances the adsorption capacity of sulfonamides (i.e. removal of sulfamethoxazole increased from 8 % onto 3 mm PA pellets to 80 % onto 50 mm of PA pellets). According to characterization results, adsorption mechanism is explained by pore filling and hydrogen bonds (for PA) and hydrophobic interactions (for PS). After adsorption, surface area was increased in both MP as result of a potential ageing of the particles and the intensity of XRD peaks was higher denoting a MP structure more amorphized. Metabolites were adsorbed more efficiently than their parent compounds on PS while the opposite effect was observed on PA explained by the acetylation of the amine group and, subsequently the reduction of hydrogen bond interactions. Although the dissolved organic matter inhibits sulfonamides adsorption, removal up to 65.2 % in effluent wastewater and up to 72.1 % in surface water were observed in experiments using real matrices denoting the role of MP as vectors of sulfonamide antibiotics in aquatic media.

Adsorption of Macrolide Antibiotics and a Metabolite onto Polyethylene Terephthalate and Polyethylene Microplastics in Aquatic Environments.

Microplastics (MPs) and antibiotics are emerging pollutants widely found in aquatic environments, potentially causing environmental harm. MPs may act as carriers for antibiotics, affecting their environmental distribution. This study investigates the adsorption of four macrolide antibiotics and a metabolite onto two types of MPs: polyethylene terephthalate (PET) and polyethylene (PE). Results revealed a linear isotherm adsorption model, with higher adsorption to PET than to PE (R2 > 0.936 for PE and R2 > 0.910 for PET). Hydrophobic interactions and hydrogen bonding could be the main adsorption mechanisms, with pore filling potentially involved. Reduced particle size enhances adsorption due to the increase of active adsorption sites. This increasement is more pronounced in PE than in PET, leading to an 11.6% increase in the average adsorption of all macrolides to PE, compared to only 5.1% to PET. Dissolved organic matter inhibits adsorption (azithromycin adsorption to PE was reduced from 12% to 5.1%), while salinity enhances it just until 1% salinity. pH slightly influences adsorption, with maximal adsorption at neutral pH. Results in real samples showed that complexity of the matrix decreased adsorption. Overall, these findings indicate that PE and PET MPs can be a vector of macrolides in aquatic environments.

Influence of microplastic contamination on the dissipation of endocrine disrupting chemicals in soil environment.

Microplastic (MP) contamination is in the spotlight today, yet knowledge of their interaction with other organic contaminants in the soil environment is limited. Concerns extend to endocrine disrupting chemicals (EDCs), known for their potential to interfere with the hormonal systems of organisms and for their persistence and widespread presence in the environment. In this study, the most frequently occurring EDCs were monitored both in alluvial soil and in soil contaminated with different MPs commonly found in soil media, polyethylene, polyamide, and polystyrene. Bisphenol A and parabens were the most rapidly dissipating compounds, followed by triclosan and triclocarban, with the latter showing poor degradation. Per- and polyfluoroalkyl substances (PFAS) showed high persistence as concentrations remained nearly constant throughout the experiment. Although they fitted well with first-order dissipation kinetics, most showed biphasic behavior. The co-occurrence of MPs in the soil influenced the kinetic behavior in most cases although the differences were not very marked. MPs could impact sorption-desorption processes, affecting contaminant mobility and bioavailability to organisms in soil. These findings strengthen evidence for the influence of MPs on the behavior of soil contaminants such as EDCs, not only as vectors or sources of contaminants but by affecting dissipation kinetics.

Green Assessment of Analytical Procedures for the Determination of Pharmaceuticals in Sewage Sludge and Soil.

The main difficulties when analyzing pharmaceutically active compounds (PhACs) in solid environmental samples is the complexity of the samples and the low concentration levels of such pollutants. Most efforts are focused in achieving good analytical performance parameters such as high recoveries or low detection limits without considering if the methods are environmentally friendly. In this work, the main tools proposed for assessing the greenness of analytical methodologies (Analytical Eco-scale, Green Analytical Procedure Index (GAPI), and Analytical GREEnness metric (AGREE)) have been applied to nine analytical procedures that include recent important analytical tendencies. The three metrics identified the paper spray ionization method as the greenest procedure since it used untreated samples for direct mass spectrometry analysis. Using Analytical Eco-scale, most of the evaluated procedures were rated as "acceptable green". However, the use of internal standards resulted key in the environmental impact of the method which provided contradictory results versus other metrics. GAPI found greenness similarities between most of selected methods, hindering a greenness classification. AGREE allowed the weighting of each evaluation criterion providing a greenness ranking. The application of each metric detecting their weaknesses and strengths was discussed. The incorporation of validation analytical features in greenness metrics was a gap revealed.

Multiresidue method for the determination of critically and highly important classes of antibiotics and their metabolites in agricultural soils and sewage sludge.

In this paper, a method is proposed for the determination of antibiotics classified by the World Health Organization as critically important (four macrolides and three quinolones) and highly important (one tetracycline, one diaminopyridine, and three sulfonamides) and eight of their metabolites. The method is based on ultrasound-assisted extraction, dispersive solid-phase extraction clean-up, and analytical determination by liquid chromatography-tandem mass spectrometry. Variables affecting each stage of the analytical method were thoroughly optimised. The method was validated for its application to sewage sludge from different treatment stages (non-treated sludge: primary and secondary sludge; and treated sludge: digested sludge and compost) and to agricultural soil. Limits of quantification were in the range of 0.03-7.50 ng g-1 dry weight (dw) for most of the compounds. Accuracy values were in the range of 70-102%. Precision was below 17%. The application of the method to real samples revealed that macrolides and fluoroquinolones were the antibiotic classes at the highest concentrations in all types of samples. The lowest concentrations of antibiotics were measured in compost (highest concentration: 27 ng g-1 dw, corresponding to norfloxacin) and soil samples (highest concentration: 93 ng g-1 dw, corresponding to a metabolite of clarithromycin). The proposed method is the first developed to date for the determination of multiclass antibiotics and their main metabolites in sludge from different treatment stages. The method can provide a useful tool for obtaining information about antibiotics in sewage sludge prior to its application to agricultural soils and in agricultural soils.

Adsorption of Fluoroquinolone Antibiotics from Water and Wastewater by Colemanite.

Pharmaceutical residues in water and wastewater have become a worldwide problem with environmental and public health consequences. Antibiotics are of special importance because of the emergence of antibiotic-resistant genes. This study evaluates the adsorptive removal of four common fluoroquinolone antibiotics by using natural colemanite as an alternative adsorbent for the first time. Batch adsorption experiments were conducted for the mixture of fluoroquinolones as well as for individual compounds during the isotherm studies. Adsorption kinetic results indicated that the process followed the pseudo-second-order (PSO) model, while the Langmuir model described the sorption isotherms. The effects of pH and temperature on adsorption performance were determined, and the results indicated that the adsorption was endothermic and spontaneous, with increasing randomness at the solid-liquid interface. The effects of real water and wastewater matrices were tested by using tap water, surface water, and wastewater samples. Reusability experiments based on five adsorption-desorption cycles indicated that the adsorption performance was mostly retained after five cycles. The adsorption mechanism was elucidated based the material characterization before and after adsorption. The results indicate that colemanite can be used as an effective and reusable adsorbent for fluoroquinolone antibiotics as well as for other pollutants with similar physicochemical properties.

Thermodynamic and Kinetic Investigation of the Adsorption and Desorption of Trimethoprim and Its Main Metabolites in Mediterranean Crop Soils.

The adsorption-desorption processes of organic pollutants into the soil are one of the main factors influencing their potential environmental risks and distribution in the environment. In the present work, the adsorption-desorption behavior of an antibiotic, trimethoprim (TMP), and two of its main metabolites, 3-desmethyltrimethoprim (DM-TMP) and 4-hydroxytrimethoprim (OH-TMP), were assessed in three Mediterranean agricultural soils with different physicochemical characteristics. Results showed that the adsorption kinetic is performed in two steps: external sorption and intraparticle diffusion. The adsorptions of the studied compounds in soils were similar and fitted to the three models but were better fitted to a linear model. In the case of DM-TMP and OH-TMP, their adsorptions were positively correlated with the soil organic matter. In addition, desorption was higher in less organic matter soil (from 1.3 to 30.9%). Furthermore, the desorptions measured for the TMP metabolites were lower than those measured in the case of TMP (from 2.0 and 4.0% for OH-TMP and DM-TMP, respectively, to 9.0% for TMP).

Adsorption of perfluoroalkyl substances on polyamide microplastics: Effect of sorbent and influence of environmental factors.

Microplastics (MPs) and perfluoroalkyl substances (PFASs) are two types of pollutants coexisting in the environment. Their co-exposure is a source of increasing concern. MPs present in the natural environment suppose an ideal surface for the sorption of hazardous contaminants. This study investigates the adsorption behaviour of six PFASs on polyamide (PA) MPs. Adsorption experiments under various internal (PA and PFASs dosage, PA particle size) and environmental (pH, ionic strength, dissolved organic matter) factors were carried out. Isotherm results (from 0.1 to 25 mg/L of PFASs) showed that the maximum adsorption capacity of the selected PFASs on the PA was as follows: perfluorooctanesulfonic acid (PFOS, 0.873 mg/g) > perfluorooctanoic acid (0.235 mg/g) > perfluoroheptanoic acid (0.231 mg/g) > perfluorohexanoic acid (0.201 mg/g) > perfluoropentanoic acid (0.192 mg/g) > perfluorobutanoic acid (0.188 mg/g) (pH 5.88, 0% salinity and 0% of dissolved organic matter). The PFOS has more tendency to be sorbed onto PA than perfluorocarboxilic acids. The MP characterization by scanning electron microscopy, X ray diffraction and Fourier transform infrared spectroscopy showed changes in the PA surface after adsorption assays. Pore filling, hydrophobic interactions and hydrogen bonds governed sorption process. The sorption capacity of PFASs was crucially affected by the PA size (from 19.6% to 99.9% for 3 mm and 50 µm particle size, respectively). The process was not significantly influenced by salinity while the dissolved organic matter exerted a negative effect (decrease from 100% to 26% for PFOS in presence of 25 mg/L of humic acid). Finally, adsorption rates of PFASs were quantified in real water matrices (influent and effluent wastewater, surface and tap water samples). The results revealed interactions between PA and PFASs and evidenced the role of PA as a vector to transport PFASs in the aquatic environment.

Antibiotic adsorption by natural and modified clay minerals as designer adsorbents for wastewater treatment: A comprehensive review.

Increased antibiotic use worldwide has become a major concern because of their health and environmental impacts. Since most antibiotic residues can hardly be removed from wastewater using conventional treatments, alternative methods receive great attention. Adsorption is one of the most efficient and cost-effective treatment methods for antibiotics. Among the adsorbents, clay minerals have garnered increasing attention due to their unique properties including availability, high specific surface area, low cost, cation exchange capacity, and good removal efficiency. This paper reviews the recent progress made in the use of natural and modified clay minerals for the removal of antibiotics from water. First, the sources, occurrence, removal and health effects of the antibiotics commonly encountered in water bodies are described. Antibiotic concentration levels and average removal efficiencies measured in conventional activated sludge treatment systems worldwide are also provided to better address the problem. Second, the review explores the characteristics of clay minerals as adsorbent of antibiotics and the factors affecting the adsorption. The review identifies and discusses the future trends and strategies used to increase the adsorption capacity of clay minerals by modification and combination techniques (intercalation of novel functional groups such as organocations, biopolymers and metal pillared-clay minerals, combination with biochar or thermal activation). The quantitative comparisons of clay minerals' ability for antibiotic removal are given. Some natural clay minerals have good removal potential for antibiotics, with maximum adsorption capacities over 100 mg/g. For most other adsorbents, surface modifications and combination techniques resulted in improved adsorption properties (including higher surface area, enhanced adsorption capacity, increased stability and mechanical strength). Finally, the application of these adsorbents at pilot scale, using real wastewater samples, their reuse, economic analysis and life cycle assessment are other issues that have been considered.

Development and validation of a highly effective analytical method for the evaluation of the exposure of migratory birds to antibiotics and their metabolites by faeces analysis.

The widespread occurrence of antibiotics in the environment may exert a negative impact on wild organisms. In addition, they can become environmental reservoirs, through the ingestion of food or contaminated water, and vectors for antibiotic-resistant bacteria. This fact is even more important in migratory birds that can promote their dissemination across continents. In this work, a multiresidue analytical method suitable for the determination of five families of antibiotics and their main metabolites in waterbird faeces has been developed and validated. The target compounds include environmentally significant sulfonamides, macrolides, fluoroquinolones, tetracyclines and antifolates. Sample treatment involves ultrasound-assisted extraction with methanol and dispersive solid-phase extraction clean-up with C18. Analytical determination was carried out by liquid chromatography-tandem mass spectrometry. The most significant parameters affecting sample extraction and extract clean-up were optimised by means of experimental designs. Good linearity (R2 > 0.994), accuracy (from 41 to 127%), precision (relative standard deviation lower than 24%) and limits of quantification (lower than 2 ng g-1 (dry weight, dw)) were obtained for most of the compounds. The method was applied to the determination of the selected compounds in 27 faeces samples from three common migratory waterbird species. Nine antibiotics and three of their metabolites were detected in the analysed samples. Fluoroquinolones and macrolides were the antibiotics most frequently detected. The highest concentrations corresponded to norfloxacin (up to 199 ng g-1 dw).

Pharmaceuticals and Their Main Metabolites in Treated Sewage Sludge and Sludge-Amended Soil: Availability and Sorption Behaviour.

This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g-1 dm), ibuprofen (45 ng g-1 dm) and carbamazepine (9.3 ng g-1 dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge-soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log Kd ranged from -1.55 to 1.71 in sludge samples and from -0.29 to 1.18 in soil-sludge mixtures. The log Kd values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.

Evaluation of the neurorestorative effects of the murine beta-nerve growth factor infusions in old rat with cognitive deficit.

The nerve growth factor (NGF) is known to participate in the regulation of the expression levels and activity of the choline acetyltransferase (ChAT) in the nervous system. This enzyme is sensitive to the degenerative changes found in Alzheimer's disease (AD). We compared the effectiveness of intraparenchymal (ip) and intracerebroventricular (icv) administration of the murine beta-NGF (beta-NGFm) produced in our laboratories, through the determination of the expression levels and activity of the ChAT, and the evaluation of behavioral recovery in aged rat with cognitive deficit. Our results indicated that icv infusion of beta-NGFm stimulates the expression levels of ChAT gene in the striatum of old rats. Remarkable losses in the ChAT activity were observed in the septum and striatum of old rats. Exogenous administration of beta-NGFm produced a significant increase of ChAT activity in these brain regions differentially according to the administration pathway. The behavioral studies demonstrated that the administration pathway is an important factor in order to obtain the best results for a neurorestorative treatment.