An economical preparation strategy of magnetic biochar with high specific surface area for efficient removal of methyl orange.

Magnetic biochar (MBC) was obtained from pepper straw by impregnation-microwave pyrolysis method. The pyrolysis temperature and FeCl3 impregnation concentration were investigated on the structural properties of MBC and the adsorption of methyl orange (MO) in water. Characterization results showed that pyrolysis temperature and iron species significantly increased the specific surface area of MBC, which could reach the maximum of 2038.61 m2/g, and also provided more active adsorption sites by promoting the generation of graphitized structures and surface polar functional groups. MBC0.2-900 was selected as the adsorbent for MO with the maximum adsorption capacity reached 437.18 mg·g-1, 3.4 times higher than the virgin biochar. The adsorption process was dominated by chemisorption as well as spontaneous and exothermic. The adsorption mechanisms included pore-filling interaction, π-π EDA interaction, electrostatic interaction, hydrogen bonding, and Lewis acid-base electron interaction. In addition, MBC also exhibited excellent separability and reusability as a low-cost adsorbent. This study provided some theoretical foundation and technological support for producing high-performance biochar and developing pollutant removal technology in wastewater.

Selection of pollution-safe head cabbage: Interaction of multiple heavy metals in soil on bioaccumulation and transfer.

Screening for pollution-safe cultivars (PSCs) is a cost-effective strategy for reducing health risks of crops in heavy metal (HM)-contaminated soils. In this study, 13 head cabbages were grown in multi-HMs contaminated soil, and their accumulation characteristics, interaction of HM types, and health risks assessment using Monte Carlo simulation were examined. Results showed that the edible part of head cabbage is susceptible to HM contamination, with 84.62% of varieties polluted. The average bio-concentration ability of HMs in head cabbage was Cd> > Hg > Cr > As>Pb. Among five HMs, Cd and As contributed more to potential health risks (accounting for 20.8%-48.5%). Significant positive correlations were observed between HM accumulation and co-occurring HMs in soil. Genotypic variations in HM accumulation suggested the potential for reducing health risks through crop screening. G7 is a recommended variety for head cabbage cultivation in areas with multiple HM contamination, while G3 could serve as a suitable alternative for heavily Hg-contaminated soils.

Mechanisms insights into Cd passivation in soil by lignin biochar: Transition from flooding to natural air-drying.

Biochar shows great potential in soil cadmium pollution treatment, however, the effect and mechanisms of biochar on cadmium passivation (CP) during the long-term process of soil from flooding to natural air-drying are not clear. In this study, a 300-day experiment was conducted to keep the flooded water level constant for the first 100 days and then dried naturally. Mechanisms of CP by lignin biochar (LBC) were analyzed through chemical analysis, FTIR-2D-COS, EEMs-PARAFAC, ultraviolet spectroscopy characterizations, and microbial community distribution of soil. Results showed that application of LBC results in rapid CP ratio in soil within 35 days, mainly in the residual and Fe-Mn bound states (total 72.80%). CP ratio further increased to 90.89% with water evaporation. The CP mechanisms include precipitation, electrostatic effect, humus complexation, and microbial remediation by promoting the propagation of fungi such as Penicillium and Trichoderma. Evaporation of water promoted the colonization of aerobic microorganisms and then increased the degree of soil humification and aromatization, thereby enhancing the cadmium passivation. Simultaneously, the biochar could reduce the relative abundance of plant pathogens in soil from 1.8% to 0.03% and the freshness index (ß/α) from 0.64 to 0.16, favoring crop growth and promoting carbon sequestration and emission reduction.

Risk factors and characteristics analysis of cognitive impairment in patients with cerebral infarction during recovery period.

OBJECTIVE: To analyze the risk factors and characteristics of cognitive impairment in patients with cerebral infarction during the recovery period. METHODS: This retrospective case-control study included 183 patients with cerebral infarction in the recovery period. According to the MMSE score, they were divided into a cognitive impairment group of 79 cases and a cognitive normal group of 104 cases. Collect clinical data from all patients, including age, gender, body mass index, laboratory test results, past medical history, National Institute of Health Stroke Scale (NIHSS) score, modified Barthel index, Oxfordshire Community Stroke Project (OCSP) classification, and number of infarcted lesions. Multiple logistic regression analysis was used to identify risk factors related to cognitive impairment in patients with cerebral infarction. RESULT: There were significant differences (p < 0.05) between the cognitive impairment group and the cognitive normal group in terms of age, body mass index, low-density lipoprotein level, NIHSS score, modified Barthel index, and number of infarcted lesions. Multivariate logistic regression analysis showed that age ≥ 65 years, stroke, carotid artery plaques, NIHSS score ≥ 5, anterior circulation infarction type, and multiple infarcted lesions were important risk factors for cognitive impairment. CONCLUSION: Elderly age, presence of carotid artery plaques, high NIHSS score, multiple infarct lesions, and specific infarct types are important risk factors for cognitive dysfunction in patients during the recovery period of cerebral infarction.

Highly efficient Ni(II) adsorption by industrial lignin-based biochar: a pivotal role of dissolved substances within biochar.

In the context of carbon neutrality, promoting resource utilization of industrial alkali lignin addressing heavy metal pollution is crucial for China's pollution alleviation and carbon reduction. Microwave pyrolysis produced functionalized biochar from industrial alkali lignin for Ni(II) adsorption. LB400 achieved 343.15 mg g-1 saturated adsorption capacity in 30 min. Pseudo-second-order kinetic and Temkin isotherm models accurately described the adsorption, which was endothermic and spontaneous (ΔGÏ´ < 0, ΔHÏ´ > 0). Quantitative analysis revealed that both dissolved substances and carbon skeleton from biochar contributed to adsorption, with the former predominates (93.76%), including mineral precipitation NiCO3 (Qp) and adsorption of dissolved organic matter (QDOM). Surface complexation (Qc) and ion exchange (Qi) on the carbon skeleton accounted for 6.3%. Higher biochar preparation temperature reduced Ni(II) adsorption by dissolved substances. Overall, biochar which comes from the advantageous disposal of industrial lignin effectively removes Ni(II) contamination, encouraging ecologically sound treatment of heavy metal pollution and sustainable resource utilization.

Functionalized biochars with highly-efficient malachite green adsorption property produced from banana peels via microwave-assisted pyrolysis.

In this study, functionalized banana peel biochar (BPB) was prepared by microwave-assisted pyrolysis for the first time to investigate its adsorption to malachite green (MG) dye. Adsorption experiments showed that the maximum adsorption capacity of BPB500 and BPB900 to malachite green reached 1790.30 and 2297.83 mg·g-1 within 120 min. The adsorption behaviour was well-fitted by the pseudo-second-order kinetic model and Langmuir isotherm model, and ΔG0 < 0, ΔH0 > 0, indicated that the adsorption process was endothermic and spontaneous, dominated by chemisorption. The adsorption mechanism of MG dye on BPB included hydrophobic interaction, hydrogen bonding, π-π interaction, n-π interaction, and ion exchange. Meanwhile, through regeneration tests, simulated wastewater treatment experiments, and cost calculations, it was found that BPB has great potential for practical applications. This work demonstrated that microwave-assisted pyrolysis is a viable low-cost approach for producing excellent sorbents from biomass, and banana peel is a promising feedstock to prepare biochar for dye removal.

Integrated analysis of multi-omics and fine-mapping reveals a candidate gene regulating pericarp color and flavonoids accumulation in wax gourd (Benincasa hispida).

Wax gourd (Benincasa hispida), a popular fruit of the Cucurbitaceae (cucurbits) family, contains many nutrients with health benefits and is widely grown in China and other tropical areas. In this study, a wax gourd mutant hfc12 with light-color pericarp was obtained through ethane methylsulfonate (EMS) mutagenesis. Integrative analysis of the metabolome and transcriptome identified 31 differentially accumulated flavonoids (DAFs; flavonoids or flavonoid glycosides) and 828 differentially expressed genes (DEGs) between the hfc12 mutant and wild-type 'BWT'. Furthermore, BSA-seq and kompetitive allele specific PCR (KASP) analysis suggested that the light-color pericarp and higher flavonoid content was controlled by a single gene BhiPRR6 (Bhi12M000742), a typical two-component system (TCS) pseudo-response regulator (PRR). Genetic analysis detected only one nonsynonymous mutation (C-T) in the second exon region of the BhiPRR6. Weighted correlation network analysis (WGCNA) identified the downstream target genes of BhiPRR6, probably regulated by light and were intermediated in the regulatory enzyme reaction of flavonoid biosynthetic pathway. Thus, these results speculated that the transcription factor BhiPRR6, interacting with multiple genes, regulates the absorption of light signals and thereby changes the pericarp color and synthesis of flavonoids in wax gourd.

Industrial alkali lignin-derived biochar as highly efficient and low-cost adsorption material for Pb(II) from aquatic environment.

Developing a cost-effective and high-efficiency biochar is critical in various environmental applications. Lignin-based materials are natural and abundant adsorbents to heavy metals benefited from their special polyphenol structure and physicochemical properties. In this study, adsorption capacities to Pb(II) by alkali lignin (AL) and its biochar derivative (ALB) were comparatively discussed, and the latter exhibited superior adsorption performance, with a maximum adsorption capacity almost twice that of the former, and a much faster absorption rate. The qm value of ALB was significantly superior to that of other reported biochar materials. Pb(II) was mainly adsorbed into ALB in three forms: mineral precipitation, ion exchange, and surface complexation, with complexation and mineral precipitation being the dominant mechanisms of adsorption. This study demonstrates that alkali-lignin derived biochar is a promising material for the remediation of polluted by Pb(II).

Isoliquiritigenin Inhibits Atherosclerosis by Blocking TRPC5 Channel Expression.

Isoliquiritigenin (ISL) is a flavonoid isolated mainly from the licorice plant, a traditional Chinese herb. ISL has shown anticancer, anti-inflammatory, antioxidant, and antidiabetic activities. However, the pharmaceutical effects of ISL on atherosclerosis are seldom explored. In this study, we used apolipoprotein E (ApoE) knockout mouse model and angiotensin II- (Ang II-) stimulated vascular smooth muscle cells (VSMCs) to elucidate the pharmacological mechanism of ISL to inhibit atherosclerosis. We found that in ApoE-/- mice ISL could attenuate atherosclerotic lesion, reduce serum lipid levels, and inhibit TRPC5 expression. In vitro, ISL inhibited Ang II-stimulated proliferation of VSMCs and suppressed Ang II-induced TRPC5 and PCNA expressions in a dose-dependent fashion. In conclusion, our findings provide novel insight into the pharmacological effects of ISL on atherosclerosis and suggest that ISL is beneficial for cardiovascular protection.

Evaluation of the uptake capacities of heavy metals in Chinese cabbage.

Heavy metal (HM) contamination in soil result in second pollution damage to Chinese cabbage, leading to deleterious health impacts. To elucidate the common transfer and accumulation characteristics of HMs in Chinese cabbage cultivar is important for safety breeding and consumption. In this case, concentrations and transfer capacities of HMs (Cd, Cr, Hg, Pb and As) in 35 common Chinese cabbage genotypes and their genotypic difference were investigated in this work. Results indicate that Chinese cabbage cultivar was more susceptible to Cd pollution, Hg was easily sifted from underground part to aerial part, Cr and Pb have similar enrichment and translocation characteristics, and Chinese cabbage cultivar had tolerance to As toxicity to some extent. Moreover, genotypic difference in HM accumulation in different parts of Chinese cabbage cultivar was also observed, and for edible part, followed by Hg>As>Cd>Pb>Cr. Referring to overall HM pollution level and biomass yield of edible part of 35 tested Chinese cabbages, B18, B6, B2 and B3 could be considered as the potential HMs pollution-safe Chinese cabbage cultivars. Information founded in this work may be used to provide referential strategies and methods to minimize the influx of HMs pollutants to human being through consumption and cultivation of Chinese cabbages.