Nanoparticle-mediated thermal Cancer therapies: Strategies to improve clinical translatability.

Despite significant advances, cancer remains a leading global cause of death. Current therapies often fail due to incomplete tumor removal and nonspecific targeting, spurring interest in alternative treatments. Hyperthermia, which uses elevated temperatures to kill cancer cells or boost their sensitivity to radio/chemotherapy, has emerged as a promising alternative. Recent advancements employ nanoparticles (NPs) as heat mediators for selective cancer cell destruction, minimizing damage to healthy tissues. This approach, known as NP hyperthermia, falls into two categories: photothermal therapies (PTT) and magnetothermal therapies (MTT). PTT utilizes NPs that convert light to heat, while MTT uses magnetic NPs activated by alternating magnetic fields (AMF), both achieving localized tumor damage. These methods offer advantages like precise targeting, minimal invasiveness, and reduced systemic toxicity. However, the efficacy of NP hyperthermia depends on many factors, in particular, the NP properties, the tumor microenvironment (TME), and TME-NP interactions. Optimizing this treatment requires accurate heat monitoring strategies, such as nanothermometry and biologically relevant screening models that can better mimic the physiological features of the tumor in the human body. This review explores the state-of-the-art in NP-mediated cancer hyperthermia, discussing available nanomaterials, their strengths and weaknesses, characterization methods, and future directions. Our particular focus lies in preclinical NP screening techniques, providing an updated perspective on their efficacy and relevance in the journey towards clinical trials.

Avalanching strain dynamics during the hydriding phase transformation in individual palladium nanoparticles.

Phase transitions in reactive environments are crucially important in energy and information storage, catalysis and sensors. Nanostructuring active particles can yield faster charging/discharging kinetics, increased lifespan and record catalytic activities. However, establishing the causal link between structure and function is challenging for nanoparticles, as ensemble measurements convolve intrinsic single-particle properties with sample diversity. Here we study the hydriding phase transformation in individual palladium nanocubes in situ using coherent X-ray diffractive imaging. The phase transformation dynamics, which involve the nucleation and propagation of a hydrogen-rich region, are dependent on absolute time (aging) and involve intermittent dynamics (avalanching). A hydrogen-rich surface layer dominates the crystal strain in the hydrogen-poor phase, while strain inversion occurs at the cube corners in the hydrogen-rich phase. A three-dimensional phase-field model is used to interpret the experimental results. Our experimental and theoretical approach provides a general framework for designing and optimizing phase transformations for single nanocrystals in reactive environments.

Quantum measurement and orientation tracking of fluorescent nanodiamonds inside living cells.

Fluorescent particles are routinely used to probe biological processes. The quantum properties of single spins within fluorescent particles have been explored in the field of nanoscale magnetometry, but not yet in biological environments. Here, we demonstrate optically detected magnetic resonance of individual fluorescent nanodiamond nitrogen-vacancy centres inside living human HeLa cells, and measure their location, orientation, spin levels and spin coherence times with nanoscale precision. Quantum coherence was measured through Rabi and spin-echo sequences over long (>10 h) periods, and orientation was tracked with effective 1° angular precision over acquisition times of 89 ms. The quantum spin levels served as fingerprints, allowing individual centres with identical fluorescence to be identified and tracked simultaneously. Furthermore, monitoring decoherence rates in response to changes in the local environment may provide new information about intracellular processes. The experiments reported here demonstrate the viability of controlled single spin probes for nanomagnetometry in biological systems, opening up a host of new possibilities for quantum-based imaging in the life sciences.

Surface plasmon mediated strong exciton-photon coupling in semiconductor nanocrystals.

We present an experimental demonstration of strong coupling between a surface plasmon propagating on a planar silver thin film and the lowest excited state of CdSe nanocrystals. Attenuated total reflection measurements demonstrate the formation of plasmon-exciton mixed states, characterized by a Rabi splitting of approximately 112 meV at room temperature. Such a coherent interaction has the potential for the development of nonlinear plasmonic devices, and furthermore, this system is akin to those studied in cavity quantum electrodynamics, thus offering the possibility to study the regime of strong light-matter coupling in semiconductor nanocrystals under easily accessible experimental conditions.

The effects of chemisorption on the luminescence of CdSe quantum dots.

We report on the effects of Lewis bases and other ligands on radiative recombination in CdSe quantum dots (QDs) in several solvents. Long-chain primary amines are found to be the most efficacious capping agents for CdSe QDs in nonpolar solvents. Primary alkylamines are superior to secondary and tertiary alkylamines. The kinetics of chemisorption and desorption in less polar solvents, such as hexane or chloroform, are temperature controlled and obey a Langmuir isotherm. Mercaptan adsorption also obeys a Langmuir isotherm, and alkylmercaptans rapidly displace amines, leading to luminescence quenching. In more polar solvents, such as toluene, ligands desorb, leading to luminescence quenching. It is proposed that surface Cd vacancies function as nonradiative recombination centers. The adsorption of a Lewis base to the QD raises the surface vacancy energy close to, or above, the conduction band edge and eliminates electron capture by the surface vacancies. Solvent polarity has a strong effect on luminescence since the solvent determines the extent of ligand adsorption to the QD surface.

Single adhesive nanofibers from a live diatom have the signature fingerprint of modular proteins.

The adhesive and mechanical properties of a cell-substratum adhesive secreted by live diatom cells were examined in situ using atomic force microscopy. The resulting force curves have a regular saw-tooth pattern, the characteristic fingerprint of modular proteins, and when bridged between tip and surface can repeatedly be stretched and relaxed resulting in precisely overlaying saw-tooth curves (up to approximately 600 successive cycles). The average rupture force of the peaks is 0.794 +/- 0.007 (mean +/- SE) nN at a loading rate of 0.8 microm/s and the average persistence length is 0.026 +/- <0.001 (mean +/- SE) nm (fit using the worm-like chain model). We propose that we are pulling on single adhesive nanofibers, each a cohesive unit composed of a set number of modular proteins aligned in register. Furthermore, we can observe and differentiate when up to three adhesive nanofibers are pulled based upon multimodal distributions of force and persistence length. The high force required for bond rupture, high extensibility (approximately 1.2 microm), and the accurate and rapid refolding upon relaxation, together provide strong and flexible properties ideally suited for the cell-substratum adhesion of this fouling diatom and allow us to understand the mechanism responsible for the strength of adhesion.

Scattering curves of ordered mesoscopic materials.

Analytical expressions for the scattering functions of ordered mesoscopic materials are derived and compared to experimentally determined scattering curves. Ordered structures comprising spheres (fcc, bcc, hcp, sc), cylinders (hex, sq), and lamellar structures are considered. The expressions take into account particle size distributions and lattice point deviations, domain size, core/shell structures, as well as peak shapes varying analytically between Lorentzian and Gaussian functions. The expressions allow one to quantitatively describe high-resolution synchrotron small-angle X-ray (SAXS) and neutron scattering (SANS) curves from lipid and block copolymer lyotropic phases, core/shell nanoparticle superstructures, ordered nanocomposites, and ordered mesoporous materials. In addition, the diffuse out-of-plane scattering of grazing incidence GISAXS and GISANS experiments of laterally ordered thin films can be quantitatively analyzed.

Drastic reduction of plasmon damping in gold nanorods.

The dephasing of particle plasmons is investigated using light-scattering spectroscopy on individual gold nanoparticles. We find a drastic reduction of the plasmon dephasing rate in nanorods as compared to small nanospheres due to a suppression of interband damping. The rods studied here also show very little radiation damping, due to their small volumes. These findings imply large local-field enhancement factors and relatively high light-scattering efficiencies, making metal nanorods extremely interesting for optical applications. Comparison with theory shows that pure dephasing and interface damping give negligible contributions to the total plasmon dephasing rate.

Characterisation of adhesional properties of lactose carriers using atomic force microscopy.

The atomic force microscopy (AFM) colloid probe technique was investigated as a method for the characterisation of adhesional properties of pharmaceutical powder surfaces. Lactose carriers used in dry powder inhaler (DPI) formulations were chosen for investigation since adhesion between the carrier surface and drug particles has been proposed to affect the dispersion of drug particles. Individual adhesion forces were determined by measuring the detachment forces in air between the colloid probe and the lactose particle surface. The colloid probe consisted of a silica sphere (10 microm diameter) attached to a V-shaped silicon nitride cantilever (spring constant, k=0.42 N/m). Adhesion forces were calculated from individual force-distance curves using Hooke's Law. Individual forces measured at various adhesion sites were observed to be reproducible and stable over 10 min (coefficient of variation, CV below 5%). The adhesion force distribution determined from measurements at multiple sites (n>50) on each sample followed a log-normal relationship (regression coefficient, r(2) ranged between 0.95 and 0.99). This enabled characterisation in terms of the geometric mean adhesion force and a geometric standard deviation (GSD). Significant differences (P<0.001) in adhesion force were observed between samples, ranging from 37.47+/-1.95 to 117.48+/-2.20 nN. This study demonstrates the suitability of AFM as sensitive technique for the characterisation of adhesional properties of pharmaceutical particles.

Kinetics of perchlorate- and chlorate-respiring bacteria.

Ten chlorate-respiring bacteria were isolated from wastewater and a perchlorate-degrading bioreactor. Eight of the isolates were able to degrade perchlorate, and all isolates used oxygen and chlorate as terminal electron acceptors. The growth kinetics of two perchlorate-degrading isolates, designated "Dechlorosoma" sp. strains KJ and PDX, were examined with acetate as the electron donor in batch tests. The maximum observed aerobic growth rates of KJ and PDX (0.27 and 0.28 h(-1), respectively) were only slightly higher than the anoxic growth rates obtained by these isolates during growth with chlorate (0.26 and 0.21 h(-1), respectively). The maximum observed growth rates of the two non-perchlorate-utilizing isolates (PDA and PDB) were much higher under aerobic conditions (0.64 and 0.41 h(-1), respectively) than under anoxic (chlorate-reducing) conditions (0.18 and 0.21 h(-1), respectively). The maximum growth rates of PDX on perchlorate and chlorate were identical (0.21 h(-1)) and exceeded that of strain KJ on perchlorate (0.14 h(-1)). Growth of one isolate (PDX) was more rapid on acetate than on lactate. There were substantial differences in the half-saturation constants measured for anoxic growth of isolates on acetate with excess perchlorate (470 mg/liter for KJ and 45 mg/liter for PDX). Biomass yields (grams of cells per gram of acetate) for strain KJ were not statistically different in the presence of the electron acceptors oxygen (0.46 +/- 0.07 [n = 7]), chlorate (0.44 +/- 0.05 [n = 7]), and perchlorate (0.50 +/- 0.08 [n = 7]). These studies provide evidence that facultative microorganisms with the capability for perchlorate and chlorate respiration exist, that not all chlorate-respiring microorganisms are capable of anoxic growth on perchlorate, and that isolates have dissimilar growth kinetics using different electron donors and acceptors.

The application of atomic force microscopy to topographical studies and force measurements on the secreted adhesive of the green alga Enteromorpha.

Atomic force microscopy (AFM) enables the topographical structure of cells and biological materials to be resolved under natural (physiological) conditions, without fixation and dehydration artefacts associated with imaging methods in vacuo. It also provides a means of measuring interaction forces and the mechanical properties of biomaterials. In the present study, AFM has been applied for the first time to the study of the mechanical properties of a natural adhesive produced by a green plant cell. Swimming spores of the green alga Enteromorpha linza (L.) J. Ag. (7-10 microm) secrete an adhesive glycoprotein which provides firm anchorage to the substratum. Imaging of the adhesive in its hydrated state revealed a swollen gel-like pad, approximately 1 microm thick, surrounding the spore body. Force measurements revealed that freshly released adhesive has an adhesion strength of 173 +/- 1.7 mN m(-1) (mean +/- SE; n=90) with a maximum value for a single adhesion force curve of 458 mN m(-1). The adhesive had a compressibility (equivalent to Young's modulus) of 0.54 x 10(6) +/- 0.05 x 10(6) N m-2 (mean +/- SE; n=30). Within minutes of release the adhesive underwent a progressive 'curing' process with a 65% reduction in mean adhesive strength within an hour of settlement, which was also reflected in a reduction in the average length of the adhesive polymer strands (polymer extension) and a 10-fold increase in Young's modulus. Measurements on the spore surface itself revealed considerably lower adhesion-strength values but higher polymer-extension values than the adhesive pad, which may reflect the deposition of different polymers on this surface as a new cell wall is formed. The study demonstrates the value of AFM to the imaging of plant cells in the absence of fixation and dehydration artefacts and to the characterisation of the mechanical properties of plant glycoproteins that have potential utility as adhesives.

Cyclocreatine inhibits stimulated motility in tumor cells possessing creatine kinase.

Cyclocreatine (1-carboxymethyl-2-iminoimidazolidine), an analog of creatine and a substrate for creatine kinase (EC 2.7.3.2), inhibits the stimulated motility of tumor cells which possess creatine kinase. A2058-055 human melanoma cells, transfected with a creatine kinase gene, showed an 80-90% reduction in chemotactic response to type IV collagen when incubated overnight in the presence of 10 mM cyclocreatine (p < 0.0001 for n = 8 experiments). This inhibitory effect of cyclocreatine can be partially reversed by addition of creatine to the overnight cell treatment. Non-transfected cells, with very low levels of creatine kinase, were not significantly inhibited. Further experiments utilizing type IV collagen as attractant demonstrated that cyclocreatine inhibited the chemokinetic (91%) and the haptotactic (73%) responses and the in vitro invasion of A2058-055 cells through Matrigel-coated membranes (88%). In addition, motility stimulation of A2058-055 cells by either autotaxin or fibronectin was markedly inhibited by cyclocreatine. DU-145 prostatic tumor cells, which express endogenous creatine kinase, also have a reduced motility response to either autotaxin or epidermal growth factor induced motility in the presence of cyclocreatine.

The Direct Measurement of the Forces of Interaction between a Colloid Particle and an Oil Droplet

An atomic force microscope was used to measure the forces between a silica sphere (diameter 10 μm) and a n-decane droplet (diameter 0.3 mm) in water. Force-distance profiles showed a weak attraction and adhesion due to van der Waals forces. When the anionic surfactant sodium dodecyl sulfate was added, there was electrostatic repulsion at all separations due to the adsorption of the anionic surfactant at the oil-water interface, and no adhesion of the sphere to the oil droplet was observed upon retraction. Fitting the repulsive curves to the nonlinear Poisson-Boltzmann equation for heterogeneous surfaces yielded surface potentials on the oil surface which were consistently lower than those values found from electrokinetic experiments on oil drops under similar conditions. The measured Debye lengths were also found to be significantly different from those calculated from the surfactant and electrolyte conditions employed. Possible reasons for the discrepancies are outlined.

Stimulation of tumor cell motility linked to phosphodiesterase catalytic site of autotaxin.

A family of extracellular type I phosphodiesterases has recently been isolated by cDNA cloning, but a physiological function linked to the phosphodiesterase active site has remained unknown. We now present evidence that the phosphodiesterase catalytic site, 201YMRPVYPTKTFPN213, is essential for the motility stimulating activity of autotaxin (ATX), one member of the exophosphodiesterase family. Native ATX possesses phosphodiesterase activity at neutral and alkaline pH, binds ATP noncovalently, and undergoes threonine phosphorylation. Homogeneously purified recombinant ATX, based on the teratocarcinoma sequence, retains these same activities. A single amino acid in the phosphodiesterase catalytic site, Thr210, is found to be necessary for motility stimulation, phosphodiesterase activity, and phosphorylation. Two mutant recombinant proteins, Ala210- and Asp210-ATX, lack motility stimulation and lack both enzymatic activities; Ser210-ATX possesses intermediate activities. Another mutation, with the adjacent lysine (Lys209) changed to Leu209-ATX, possesses normal motility stimulation with sustained phosphodiesterase activity but exhibits no detectable phosphorylation. This mutation eliminates the phosphorylation reaction and indicates that the dephosphorylated state is an active motility-stimulating form of the ATX molecule. By demonstrating that the phosphodiesterase enzymatic site is linked to motility stimulation, these data reveal a novel role for this family of exo/ecto-enzymes and open up the possibility of extracellular enzymatic cascades as a regulatory mechanism for cellular motility.