Asymmetrical Diketopyrrolopyrrole Derivatives with Improved Solubility and Balanced Charge Transport Properties.

The diketopyrrolopyrrole (DPP) unit represents one of the building blocks more widely employed in the field of organic electronics; in most of the reported DPP-based small molecules, this unit represents the electron acceptor core symmetrically coupled to donor moieties, and the solubility is guaranteed by functionalizing lactamic nitrogens with long and branched alkyl tails. In this paper, we explored the possibility of modulating the solubility by realizing asymmetric DPP derivatives, where the molecular structure is extended in just one direction. Four novel derivatives have been prepared, characterized by a common dithyenil-DPP fragment and functionalized on one side by a thiophene unit linked to different auxiliary electron acceptor groups. As compared to previously reported symmetric analogs, the novel dyes showed an increased solubility in chloroform and proved to be soluble in THF as well. The novel dyes underwent a thorough optical and electrochemical characterization. Electronic properties were studied at the DFT levels. All the dyes were used as active layers in organic field effect transistors, showing balanced charge transport properties.

Quinoid-Thiophene-Based Covalent Organic Polymers for High Iodine Uptake: When Rational Chemical Design Counterbalances the Low Surface Area and Pore Volume.

A novel 2D covalent organic polymer (COP), based on conjugated quinoid-oligothiophene (QOT) and tris(aminophenyl) benzene (TAPB) moieties, is designed and synthesized (TAPB-QOT COP). Some DFT calculations are made to clarify the equilibrium between different QOT isomers and how they could affect the COP formation. Once synthetized, the polymer has been thoroughly characterized by spectroscopic (i.e., Raman, UV-vis), SSNMR and surface (e.g., SEM, BET) techniques, showing a modest surface area (113 m2 g-1) and micropore volume (0.014 cm3 g-1 with an averaged pore size of 5.6-8 Å). Notwithstanding this, TAPB-QOT COP shows a remarkably high iodine (I2) uptake capacity (464 %wt) comparable to or even higher than state-of-the-art porous organic polymers (POPs). These auspicious values are due to the thoughtful design of the polymer with embedded sulfur sites and a conjugated scaffold with the ability to counterbalance the relatively low pore volumes. Indeed, both morphological and Raman data, supported by computational analyses, prove the very high affinity between the S atom in our COP and the I2. As a result, TAPB-QOT COP shows the highest volumetric I2 uptake (i.e., the amount of I2 uptaken per volume unit) up to 331 g cm-3 coupled with a remarkably high reversibility (>80% after five cycles).

Combination of Enzymes and Deep Eutectic Solvents as Powerful Toolbox for Organic Synthesis.

During the last decade, a wide spectrum of applications and advantages in the use of deep eutectic solvents for promoting organic reactions has been well established among the scientific community. Among these synthetic methodologies, in recent years, various examples of biocatalyzed processes have been reported, making use of eutectic mixtures as reaction media, as an improvement in terms of selectivity and sustainability. This review aims to show the newly reported protocols in the field, subdivided by reaction class as a 'toolbox' guide for organic synthesis.

An Integrated Characterization Strategy on Board for Recycling of poly(vinyl butyral) (PVB) from Laminated Glass Wastes.

Polyvinyl butyral (PVB) is widely used as an interlayer material in laminated glass applications, mainly in the automotive industry, but also for construction and photovoltaic applications. Post-consumed laminated glass is a waste that is mainly landfilled; nevertheless, it can be revalorized upon efficient separation and removal of adhered glass. PVB interlayers in laminated glass are always plasticized with a significant fraction in the 20-40% w/w range of plasticizer, and they are protected from the environment by two sheets of glass. In this work, the aim is to develop a thorough characterization strategy for PVB films. Neat reference PVB grades intended for interlayer use are compared with properly processed (delaminated) post-consumed PVB grades from the automotive and construction sectors. Methods are developed to open opportunities for recycling and reuse of the latter. The plasticizer content and chemical nature are determined by applying well-known analytical techniques, namely, FT-IR, TGA, NMR. The issue of potential aging during the life cycle of the original laminated material is also addressed through NMR. Based on the findings, a sensor capable of directly sorting PVB post-consumer materials will be developed and calibrated at a later stage.

Critical Assessment of the Sustainability of Deep Eutectic Solvents: A Case Study on Six Choline Chloride-Based Mixtures.

An outline of the advantages, in terms of sustainability, of Deep Eutectic Solvents (DESs) is provided, by analyzing some of the most popular DESs, obtained by the combination of choline chloride, as a hydrogen bond acceptor, and six hydrogen bond donors. The analysis is articulated into four main issues related to sustainability, which are recurrently mentioned in the literature, but are often taken for granted without any further critical elaboration, as the prominent green features of DESs: their low toxicity, good biodegradability, renewable sourcing, and low cost. This contribution is intended to provide a more tangible, evidence-based evaluation of the actual green credentials of the considered DESs, to reinforce or question their supposed sustainability, also in mutual comparison with one another.

Gold(I)-Catalyzed Reactivity of Furan-ynes with N-Oxides: Synthesis of Substituted Dihydropyridinones and Pyranones.

The reactivity of "furan-ynes" in combination with pyridine and quinoline N-oxides in the presence of a Au(I) catalyst, has been studied, enabling the synthesis of three different heterocyclic scaffolds. Selective access to two out of the three possible products, a dihydropyridinone and a furan enone, has been achieved through the fine-tuning of the reaction conditions. The reactions proceed smoothly at room temperature and open-air, and were further extended to a broad substrate scope, thus affording functionalized dihydropyridinones and pyranones.

Silver-Free Au(I) Catalysis Enabled by Bifunctional Urea- and Squaramide-Phosphine Ligands via H-Bonding.

A library of gold(I) chloride complexes with phosphine ligands incorporating pendant (thio)urea and squaramide H-bond donors was prepared with the aim of promoting chloride abstraction from Au(I) via H-bonding. In the absence of silver additives, complexes bearing squaramides and trifluoromethylated aromatic ureas displayed good catalytic activity in the cyclization of N-propargyl benzamides, as well as in a 1,6-enyne cycloisomerization, a tandem cyclization-indole addition reaction and the hydrohydrazination of phenylacetylene. Kinetic studies and DFT calculations indicate that the energetic span of the reaction is accounted by both the chloride abstraction step, facilitated by the bidentate H-bond donor via an associative mechanism, and the subsequent cyclization step.

Optimization of Nazarov Cyclization of 2,4-Dimethyl-1,5-diphenylpenta-1,4-dien-3-one in Deep Eutectic Solvents by a Design of Experiments Approach.

The unprecedented Nazarov cyclization of a model divinyl ketone using phosphonium-based Deep Eutectic Solvents as sustainable non-innocent reaction media is described. A two-level full factorial Design of Experiments was conducted for elucidating the effect of the components of the eutectic mixture and optimizing the reaction conditions in terms of temperature, time, and substrate concentration. In the presence of the Deep Eutectic Solvent (DES) triphenylmethylphosphonium bromide/ethylene glycol, it was possible to convert more than 80% of the 2,4-dimethyl-1,5-diphenylpenta-1,4-dien-3-one, with a specific conversion, into the cyclopentenone Nazarov derivative of 62% (16 h, 60 °C). For the reactions conducted in the DES triphenylmethylphosphonium bromide/acetic acid, quantitative conversions were obtained with percentages of the Nazarov product above 95% even at 25 °C. Surface Responding Analysis of the optimized data furnished a useful tool to determine the best operating conditions leading to quantitative conversion of the starting material, with complete suppression of undesired side-reactions, high yields and selectivity. After optimization, it was possible to convert more than 90% of the model substrate into the desired cyclopentenone with cis percentages up to 77%. Experimental validation of the implemented model confirmed the robustness and the suitability of the procedure, leading to possible further extension to this specific combination of experimental designs to other substrates or even to other synthetic processes of industrial interest.

Lateral lithiation in deep eutectic solvents: regioselective functionalization of substituted toluene derivatives.

The heteroatom-directed lateral lithiation of functionalized toluenes in a choline chloride-based eutectic mixture is reported. The metalations proceed within ultrafast reaction times, with a broad substrate and electrophile scope. The directing groups provide a rapid and high regioselective access to functionalized aromatic derivatives of remarkable synthetic value.

Domino Ring Expansion: Regioselective Access to 9-Membered Lactones with a Fused Indole Unit from 2-Nitrophenyl-1,3-cyclohexanediones.

The domino anionic fragmentation of 2-nitrophenyl-1,3-cyclohexanediones containing an electrophilic appendage such as aldehyde and epoxide is disclosed. This reaction, initiated by a series of nucleophiles, involves the generation of an intermediate hydroxylate followed by the regioselective formation and fragmentation of an intermediate lactolate into enolate. This strategy, devoid of any protecting group, enlarges the initial ring and provides an original access to decorated 9-membered lactones with a fused indole unit.