Electrochemical sensor for glutathione reductase based on screen-printed electrodes coated with 3,5-dinitrobenzoic acid-modified carbon nanotubes.

The preparation of a hybrid nanomaterial is reported by covalently attaching 3,5-dinitrobenzoic acid groups to the surface of oxidized multi-walled carbon nanotubes using 1,6-diaminohexane as cross-linking agent. This nanomaterial, modified with the redox mediator, was used as transduction element to construct an amperometric sensor for the efficient indirect determination of glutathione reductase at a low working potential of - 0.05 V, through the oxidation of unconsumed nicotinamide adenine dinucleotide phosphate (NADPH) in the enzymatic reaction. The sensor exhibited an excellent linear response in the range 1.6 to 174 µU/µL, with high reproducibility and selectivity. The developed device was successfully validated in real samples, accurately determining the active enzyme in diluted human serum, making it a promising alternative for the determination of glutathione reductase and other related NADPH-dependent enzymes with relevance in clinical analysis.

Sandwich-Type Electrochemical Aptasensor with Supramolecular Architecture for Prostate-Specific Antigen.

A novel sandwich-type electrochemical aptasensor based on supramolecularly immobilized affinity bioreceptor was prepared via host-guest interactions. This method utilizes an adamantane-modified, target-responsive hairpin DNA aptamer as a capture molecular receptor, along with a perthiolated ß-cyclodextrin (CD) covalently attached to a gold-modified electrode surface as the transduction element. The proposed sensing strategy employed an enzyme-modified aptamer as the signalling element to develop a sandwich-type aptasensor for detecting prostate-specific antigen (PSA). To achieve this, screen-printed carbon electrodes (SPCEs) with electrodeposited reduced graphene oxide (RGO) and gold nanoferns (AuNFs) were modified with the CD derivative to subsequently anchor the adamantane-modified anti-PSA aptamer via supramolecular associations. The sensing mechanism involves the affinity recognition of PSA molecules on the aptamer-enriched electrode surface, followed by the binding of an anti-PSA aptamer-horseradish peroxidase complex as a labelling element. This sandwich-type arrangement produces an analytical signal upon the addition of H2O2 and hydroquinone as enzyme substrates. The aptasensor successfully detected the biomarker within a concentration range of 0.5 ng/mL to 50 ng/mL, exhibiting high selectivity and a detection limit of 0.11 ng/mL in PBS.

Grafted-double walled carbon nanotubes as electrochemical platforms for immobilization of antibodies using a metallic-complex chelating polymer: Application to the determination of adiponectin cytokine in serum.

An electrochemical immunosensor for adiponectin (APN) using screen printed carbon electrodes (SPCEs) modified with functionalized double-walled carbon nanotubes (DWCNTs) as platforms for immobilization of the specific antibodies is reported. DWCNTs were functionalized by treatment with 4-aminobenzoic acid (HOOC-Phe) in the presence of isoamylnitrite resulting in the formation of 4-carboxyphenyl-DWCNTs. The oriented binding of specific antibodies toward adiponectin was accomplished by using the metallic-complex chelating polymer Mix&Go™. The HOOC-Phe-DWCNTs-modified SPCEs were characterized by cyclic voltammetry and compared with HOOC-Phe-SWCNTs/SPCE. The different variables affecting the performance of the developed immunosensor were optimized. Under the selected conditions, a calibration plot for APN was constructed showing a range of linearity extending between 0.05 and 10.0 µg/mL which is adequate for the determination of the cytokine in real samples. A detection limit of 14.5 ng/mL was achieved. The so prepared immunosensor exhibited a good reproducibility for the APN measurements, excellent storage stability and selectivity, and a much shorter assay time than the available ELISA kits. The usefulness of the immunosensor for the analysis of real samples was demonstrated by analyzing human serum from female or male healthy patients.

Carbon nanohorns as a scaffold for the construction of disposable electrochemical immunosensing platforms. Application to the determination of fibrinogen in human plasma and urine.

We describe in this work a novel electrochemical immunosensor design making use of carbon nanohorns (CNHs) as a scaffold for the preparation of disposable immunosensing platforms for the determination of fibrinogen (Fib). The approach involved the immobilization of Fib onto activated CNHs deposited on screen-printed carbon electrodes (SPCEs) and the implementation of an indirect competitive assay using anti-Fib labeled with horseradish peroxidase (HRP) and hydroquinone (HQ) as the redox mediator. Both CNHs and the Fib-CNHs covalent assembly were characterized by microscopic and electrochemical techniques. The different variables affecting the analytical performance of the amperometric immunosensing strategy were optimized. The calibration plot for Fib allowed a range of linearity between 0.1 and 100 µg/mL (r(2) = 0.994) and a detection limit of 58 ng/mL to be achieved. The Fib-CNHs/SPCEs exhibited an excellent storage stability of at least 42 days. The developed immunosensor provides, in general, an analytical performance better than that reported for other Fib immunosensors and commercial ELISA kits. This simple and relatively low cost immunosensor configuration permitted the sensitive and selective determination of Fib in human plasma and urine.

ß-N-methylamino-l-alanine causes neurological and pathological phenotypes mimicking Amyotrophic Lateral Sclerosis (ALS): the first step towards an experimental model for sporadic ALS.

ß-N-methylamino-l-alanine (L-BMAA) is a neurotoxic amino acid that has been related to various neurodegenerative diseases. The aim of this work was to analyze the biotoxicity produced by L-BMAA in vivo in rats, trying to elucidate its physiopathological mechanisms and to search for analogies between the found effects and pathologies like Amyotrophic Lateral Sclerosis (ALS). Our data demonstrated that the neurotoxic effects in vivo were dosage-dependent. For evaluating the state of the animals, a neurological evaluation scale was developed as well as a set of functional tests. Ultrastructural cell analysis of spinal motoneurons has revealed alterations both in endoplasmic reticulum and mitochondria. Since GSK3ß could play a role in some neuropathological processes, we analyzed the alterations occurring in GSK3ß levels in L-BMAA treated rats, we have observed an increase in the active form of GSK3ß levels in lumbar spinal cord and motor cerebral cortex. On the other hand, (TAR)-DNA-binding protein 43 (TDP-43) increased in L-BMAA treated animals. Our results indicated that N-acetylaspartate (NAA) declined in animals treated with L-BMAA, and the ratio of N-acetylaspartate/choline (NAA/Cho), N-acetylaspartate/creatine (NAA/Cr) and N-acetylaspartate/choline+creatine (NAA/Cho+Cr) tended to decrease in lumbar spinal cord and motor cortex. This project offers some encouraging results that could help establishing the progress in the development of an animal model of sporadic ALS and L-BMAA could be a useful tool for this purpose.

A disposable electrochemical immunosensor for the determination of leptin in serum and breast milk.

The preparation of a disposable electrochemical immunosensor for the quantification of the hormone leptin is described in this work. The preparation approach involved immobilization of a specific biotinylated anti-leptin antibody on the surface of streptavidin-functionalized magnetic beads (Strept-MBs) and a sandwich-type immunoassay involving the target analyte, monoclonal anti-leptin, and IgG labeled with alkaline phosphatase (AP-IgG). The electrochemical transduction step was accomplished by trapping the MBs bearing the immunoconjugates onto screen-printed carbon electrodes (SPCEs) by means of an Nd magnet and measuring the electrochemical oxidation of the 1-naphthol generated in the AP enzyme reaction upon 1-naphthyl phosphate (1-NPP) additions by differential pulse voltammetry (DPV). A calibration plot with a linear range between 5 and 100 pg mL(-1) as well as a detection limit of 0.5 pg mL(-1) (3sb/m) were achieved. This value is more than 27 times lower than that reported in the only voltammetric immunosensor for leptin described in the literature until now. The usefulness of the immunosensor was demonstrated by analyzing different types of real samples: human serum, infant powdered milk, and breast milk from a nursing mother with two months of breastfeeding.

Ultrasensitive detection of adrenocorticotropin hormone (ACTH) using disposable phenylboronic-modified electrochemical immunosensors.

This work reports for the first time an electrochemical immunosensor for the determination of adrenocorticotropin hormone (ACTH). The immunoelectrode design involves the use of amino phenylboronic acid for the oriented immobilization of anti-ACTH antibodies onto screen-printed carbon modified electrode surfaces. A competitive immunoassay between the antigen and the biotinylated hormone for the binding sites of the immobilized antibody was performed. The electroanalytical response was generated by using alkaline phosphatase-labelled streptavidin and 1-naphtyl phosphate as the enzyme substrate. The electrochemical oxidation of the enzyme reaction product, 1-naphtol, measured by differential pulse voltammetry was employed to monitor the affinity reaction. Under the optimized working conditions, an extremely low detection limit of 18 pg/L was obtained. Cross-reactivity was evaluated against other hormones (cortisol, estradiol, testosterone, progesterone, hGH and prolactin) and the obtained results demonstrated an excellent selectivity. The developed immunosensor was applied to a human serum sample containing a certified amount of ACTH with good results.