Physicochemical and Emulsifying Properties of Melia azedarach Gum.

Naturally occurring hydrophilic colloids are versatile excipients in drug delivery systems. They are often used as coating materials, disintegrating agents, binders, emulsion stabilizers, and other applications. This study sought to investigate the physicochemical and emulsifying properties of gum extracted from Melia azedarach (MA). The gum was harvested, authenticated, and purified using ethanol precipitation. Physicochemical, microbial, and proximate analyses were performed on the purified gum. Oil of olive emulsions containing different amounts (5-15%w/v) of the gum as emulsifiers were prepared by homogenization. The zeta potential, creaming index, and average droplet size of products were assessed. The effects of pH changes, temperature, and monovalent and divalent electrolytes on the stability of the emulsions were also investigated. The yield of the gum after purification was 68.3%w/w. The gum has low moisture content and good swelling properties. Lead, copper, cadmium, and mercury were not detected. Emulsions containing 15%w/v of acacia or MA gum had the smallest average (Z-average) droplet size (acacia: 1.837 ± 0.420 µm; MA gum: 2.791 ± 0.694 µm) and the highest zeta potential (acacia: -30.45 mV; MA gum: -32.867 mV). Increasing the concentration of the gums increased the emulsion viscosity with MA gum emulsions being more viscous than corresponding acacia emulsions. MA gum emulsions had higher emulsion capacity and stability but lower creaming index relative to acacia gum emulsions of similar concentrations. Potassium chloride (KCl) reduced zeta potential but increased Z-average for emulsions prepared with either gum. Calcium chloride (CaCl2) produced a similar but more pronounced effect. When the pH was decreased from 10 to 2, the zeta potential of the droplets was reduced, but the droplet size of emulsions prepared from either gum was increased. Increasing temperature from 25 to 90°C produced no significant (p value >0.9999) change in droplet size. These findings suggest that MA gum is a capable emulsifying agent at 15%w/v.

Development of cashew-alginate microbeads and powdered dose forms: prospects for oral vaccine delivery in chickens.

Conventional oral vaccine delivery in poultry is challenging due to vaccine degradation in the gastrointestinal (GI) environment and the need for cold-chain storage. Microencapsulation offers a solution by protecting vaccines from GI degradation and improving stability. Natural polymers like alginate and cashew gum have mucoadhesive properties, making them promising candidates for oral vaccine delivery. This study developed cashew-alginate microbeads and a powdered dose form for oral vaccine delivery in chickens. The microbeads were created using ionotropic gelation, while the powdered form was obtained via freeze-drying. These formulations were characterized for size, shape, and stability using scanning electron microscopy (SEM), light microscopy, X-ray diffraction (XRD), and Energy Dispersive X-ray (EDX). Peak adhesion time (PAT) was determined using chicken intestinal and esophageal tissues, and antigenicity was assessed with in-vitro hemagglutination (HA) and hemagglutination inhibition (HI) assays. The microbeads exhibited a spherical shape with a porous structure, suggesting enhanced antigen accommodation. Hemagglutination Inhibition tests indicated that the experimental vaccine remained effective without cold-chain storage for three months. These findings suggest that cashew-alginate microbeads are promising for oral vaccine delivery in poultry.

Development of the RP-HPLC Method for Simultaneous Determination and Quantification of Artemether and Lumefantrine in Fixed-Dose Combination Pharmaceutical Dosage Forms.

Developing countries face enormous challenges with substandard and falsified antimalarial drugs. One specific issue is the lack of a simple, cost-effective, and robust HPLC method to simultaneously determine and quantify the active pharmaceutical ingredients (APIs) in fixed-dose artemether-lumefantrine pharmaceutical dosage forms. The current study developed a novel, simple, sensitive, precise, accurate, and cost-effective RP-HPLC method for the simultaneous determination and quantification of artemether and lumefantrine in pharmaceutical dosage forms. The HPLC analysis was carried out on an Agilent 1260 Infinity Series HPLC system equipped with an ODS Intersil-C8 (150 × 4.6 mm) 5.0 µm column, by isocratic elution. The mobile phase composition consisted of acetonitrile and 0.05% orthophosphoric acid buffer of pH 3.5 in the ratio of 70 : 30 v/v. The analysis was performed at a 1 mL/min flow rate and a column temperature of 25°C. The total run time was 6 minutes. The detection was done with a variable wavelength detector (VWD) at an isosbestic point wavelength (λ) of 210 nm. The developed method was validated according to the ICH guidelines concerning system suitability, specificity, linearity, accuracy, precision, and robustness. The system suitability of the developed method revealed satisfactory theoretical plates and symmetry factors. The method proved to be specific, with no interference of mobile phase or excipients. The calibration plot exhibited linearity over the concentration range of 275-1925 µg/mL with R2 = 0.9992 for artemether and a range of 150-1050 µg/mL with R2 = 0.9985 for lumefantrine. The accuracy of the method, determined by the recovery study, was 99.79-100.16% for artemether and 99.04-99.50% for lumefantrine. The % RSD values for intraday precision were 0.175 and 0.203, while interday precision values were 0.340 and 0.554 for artemether and lumefantrine, respectively. The method demonstrated robustness when subjected to slight modifications in the flow rate, column temperature, and mobile phase composition. The developed analytical method proved satisfactory as per ICH guidelines and hence can be used for the determination and quantification of artemether and lumefantrine in bulk drug and pharmaceutical dosage forms.

Physicochemical and Microbiological Characteristics of Stem Bark Exudate Gum of Cordia millenii Tree in Conventional Release Tablets.

The development of a raw material into an acceptable pharmaceutical excipient involves evaluation of the physicochemical and formulation properties of the potential raw material. Results from these evaluations may serve as a guide to subsequent use of the substance. The objective of the study was to evaluate the physicochemical and microbiological properties of the stem bark gum of Cordia millenii tree in conventional release paracetamol tablets. From the physicochemical evaluations, the gum was slightly acidic and soluble in all the aqueous-based solvents, except 0.1 N HCl in which it was sparingly soluble. All the absorptive properties of the gum indicated tablet disintegrating potential for tablet formulation. The total ash of the gum was higher than that of the international standard gum arabic. Micromeritic properties of the gum indicated the need for a flow aid to improve its flowability. There were no harmful microorganisms detected in the gum. Aerobic organisms and moulds and yeast were detected within permissible limits. Tablets formulated using six different concentrations of gum dispersions as a binder were generally soft and failed the USP T80 standard of dissolution, indicating poor binding and drug releasing properties. Quality control properties of three different batches of tablets containing varying concentrations of the dry gum as a disintegrating agent were comparable to tablets containing equal concentrations of corn starch. The in vitro drug releases were similar at all-time points of drug evaluation. The gum can therefore be considered as a good disintegrant in the formulation of conventional release tablets.

Physicochemical Equivalence and Quality Assessment of Various Brands of Gastro-Resistant Omeprazole Capsules in the Kumasi Metropolis.

The proliferation of counterfeit and poor-quality drugs is a major public health problem, especially in developing countries such as Ghana where there are inadequate resources to effectively monitor their prevalence. Most of these drugs, which are counterfeited, are drugs, which are in high demand and will reap huge profits for the unscrupulous people who engage in such activities. The introduction of Omeprazole as one of the first-line therapies in the management of peptic and duodenal ulcers in the treatment guidelines of Ghana has resulted in many generics being introduced onto the market. The pharmaceutical quality of fifteen randomly sampled Omeprazole capsule brands in the Kumasi metropolis was assessed using the innovator brand as a comparator to confirm their suitability for patient use and to provide data for drug regulatory agencies in Ghana concerning poor quality omeprazole brands. All the sampled brands complied with the official specifications for identification with good primary and secondary packaging characteristics. Ninety-four (94%) of the sampled brands passed the uniformity of weight test. All the brands (n = 16) representing 100% passed the disintegration tests. Sixty percent (60%) of the sampled brands passed the drug content test. Ten brands (66.7%) met the specification for in vitro dissolution test. From f2 analysis, the dissolution profiles of only five brands (31%) were similar to that of the reference brand which indicated that they could be used interchangeably in clinical practice. Conclusively, ten out of the fifteen sampled brands were of good quality and only five could be used as a substitute for the innovator. Thus, regulatory agencies will need to strengthen their postmarket surveillance to ensure that generic brands of good quality are allowed onto the market.

Pharmaceutical Assessment of Watermelon Rind Pectin as a Suspending Agent in Oral Liquid Dosage Forms.

Pectin is a high molecular weight polymer which is present in virtually all plants where it contributes to the cell structure. Pectin is a high valuable food ingredient widely used as a gelling agent and thickening agent with limited use in the pharmaceutical industry. The objective of this study is to evaluate the suspending properties of pectin from watermelon rind. Tragacanth was used as a standard suspending agent to which the suspending properties of pectin from watermelon rinds were compared with. The extracted pectin was subjected to phytochemical and physiochemical characterization for its safety and suitability to use as a suspending agent. Paracetamol suspensions were formulated using tragacanth concentrations of 0.5% w/v, 1% w/v, and 2% w/v and compared with paracetamol suspensions containing the same concentrations of watermelon pectin. The suspensions were all tested for their pH, sedimentation rate, sedimentation volume, flow rate, and ease of redispersibility over a period of 4 weeks. At the end of the 4-week period, all formulated suspensions had no changes in their pH values. Suspensions containing the extracted pectin had a lower rate of sedimentation and ease of redispersibility compared to that of tragacanth. In addition, their sedimentation volumes as well as flow rates were comparable to that of the tragacanth formulations. Ultimately, pectin from watermelon rind can serve as a suitable alternative to tragacanth in formulation of pharmaceutical suspensions.

Pharmaceutical Assessment of Melia azedarach Gum as a Binder and Disintegrant in Immediate-Release Tablets.

Excipients are components other than active ingredients that are added to pharmaceutical formulations. Naturally sourced excipients are gradually gaining preeminence over synthetically sourced excipients due to local availability and continuous supply. This study aimed to investigate the binding and disintegrating characteristics of gum extracted from the bark of Melia azedarach tree. The bark of Melia azedarach was harvested from Kwahu Asasraka in Ghana. The gum was extracted with ethanol (96%), and the percentage yield, phytochemical constituents, and flow characteristics were assessed. As a disintegrant, the gum was utilized to formulate granules at varying concentrations of 5% w/w and 10% w/w using starch as the standard. The gum was also utilized to prepare granules at varying concentrations of 10% w/v and 20% w/v as a binder, with tragacanth gum serving as the reference. Eight batches of tablets were produced from the granules. The formulated tablets from each batch were then subjected to quality control testing, which included uniformity of weight, friability, disintegration, hardness, drug content, and dissolution tests, respectively. Tannins, saponins, alkaloids, and glycosides were identified in the Melia azedarach gum. The gum had a percentage yield of 67.75% and also exhibited good flow properties. All tablets passed the uniformity of weight, friability, disintegration, hardness, dissolution, and drug content tests, respectively. According to the findings of the study, Melia azedarach gum can be utilized as an excipient in place of tragacanth and starch as a binder and disintegrant, respectively, in immediate-release tablets.

Quality Assessment of Some Essential Children's Medicines Sold in Licensed Outlets in Ashanti Region, Ghana.

The quality of 68 samples of 15 different essential children's medicines sold in licensed medicine outlets in the Ashanti Region, Ghana, was evaluated. Thirty-two (47.1%) of the medicines were imported, mainly from India (65.6%) and the United Kingdom (28.1%), while 36 (52.9%) were locally manufactured. The quality of the medicines was assessed using content of active pharmaceutical ingredient (API), pH, and microbial limit tests, and the results were compared with pharmacopoeial standards. Twenty-six (38.2%) of the samples studied passed the official content of API test while 42 (61.8%) failed. Forty-nine (72.1%) of the samples were compliant with official specifications for pH while 19 (27.9%) were noncompliant. Sixty-six (97.1%) samples passed the microbial load and content test while 2 (2.9%) failed. Eighteen (26.5%) samples passed all the three quality evaluation tests, while one (1.5%) sample (CFX1) failed all the tests. All the amoxicillin suspensions tested passed the three evaluation tests. All the ciprofloxacin, cotrimoxazole, flucloxacillin, artemether-lumefantrine, multivitamin, and folic acid samples failed the content of API test and are substandard. The overall API failure rate for imported products (59.4%) was comparable to locally manufactured (63.9%) samples. The results highlight the poor quality of the children's medicines studied and underscore the need for regular pharmacovigilance and surveillance systems to fight this menace.

Evaluation of the Disintegrant Properties of Native Starches of Five New Cassava Varieties in Paracetamol Tablet Formulations.

The disintegrant potential of native starches of five new cassava (Manihot esculenta Crantz.) varieties developed by the Crops Research Institute of Ghana (CRIG) was studied in paracetamol tablet formulations. The yield of the starches ranged from 8.0 to 26.7%. The starches were basic (pH: 8.1-9.9), with satisfactory moisture content (≤15%), swelling capacity (≥20%), ash values (<1%), flow properties, and negligible toxic metal ion content, and compatible with the drug. The tensile strength (Ts ), crushing strength (Cs ), and friability (Ft ) of tablets containing 5-10% w/w of the cassava starches were similar (p > 0.05) to those containing maize starch BP. The disintegration times of the tablets decreased with increase in concentration of the cassava starches. The tablets passed the disintegration test (DT ≤ 15 min) and exhibited faster disintegration times (p > 0.05) than those containing maize starch BP. The disintegration efficiency ratio (DER) and the disintegration parameter DER c of the tablets showed that cassava starches V20, V40, and V50 had better disintegrant activity than maize starch BP. The tablets passed the dissolution test for immediate release tablets (≥70% release in 45 min) with dissolution rates similar to those containing maize starch BP.