A novel home-based method for preparing suspensions of anti-TB drugs.

BACKGROUND: Tablets are the most widely available dosage form for the treatment of TB; however, adult tablets fail to meet the needs of young children who cannot swallow these tablets or require dose titration. We tested a new, simple device (XTEMP-R®) and the methodology for converting tablets of TB drugs into a homogeneous suspension for home use by children and caregivers.METHODS: XTEMP-R is a new device used for converting tablets into liquid preparations. Four TB drugs - pretomanid, delamanid, clofazimine and bedaquiline - were dispersed in the device utilizing water and simple syrup. The reproducibility of accurately delivering aliquots from the suspension upon preparation and upon redispersion after storing for 2 days was studied.RESULTS: Suspensions of each of the drugs tested were easily prepared in about 10 min and were visually uniform in consistency. Dosages in 2 and 5 mL were assessed in suspension, and those in 5 mL tested upon redispersion after 2 days. The observed range for these dosages spanned from 94.6% to 101.1% of the theoretical concentration for the suspensions under examination. The cleaned device had no detectable residual drug.CONCLUSION: XTEMP-R can be used at home by caregivers to prepare doses of suspensions accurately for children and patients who cannot swallow tablets.

Stable, compounded bedaquiline suspensions to support practical implementation of pediatric dosing in the field.

BACKGROUND: Bedaquiline (BDQ) tablets are indicated as part of a combination regimen for the treatment of multidrug-resistant TB in adults, adolescents and children. A dispersible tablet formulation is now approved but is not currently available in all settings. The aim of this study was to develop stable extemporaneous liquid formulations of BDQ that can be stored at room temperature or 30°C for several weeks, to support pragmatic pediatric dosing in the field and reduce wastage.METHODS: BDQ tablets were suspended in simple syrup and a sugar-free vehicle. Each 20 mg/mL formulation was stored at room temperature or 30°C for 30 days in amber dispensing bottles. Appearance, BDQ potency, pH and microbial counts were determined on Days 0, 15 and 30.RESULTS: The BDQ potency in both formulations remained at 98-101% of the theoretical concentration for 30 days. The appearance, pH and microbial count of sugar-free formulation did not change during the 30-day storage. The simple syrup formulation was stable for 15 days as microbial growth was observed on Day 30.CONCLUSIONS: BDQ may be prepared in syrup or sugar-free suspensions: syrup suspensions can be stored for 15 days at room temperature and 30C, whereas sugar-free suspensions can be stored for 30 days at room temperature and 30C. This information will support practical BDQ dosing for children in the field.

Extemporaneously compounded liquid formulations of clofazimine.

BACKGROUND: Clofazimine (CFZ) is routinely used worldwide for the treatment of leprosy and TB. However, no liquid or dispersible tablet formulations of CFZ are currently available commercially for patients with challenges ingesting soft gelatin capsules or solid formulations. The aim of this research was to develop stable extemporaneous liquid formulations of CFZ that can be stored at room temperature for several weeks to enable practical dosing in the field. METHODS: Two formulations were prepared in syrup and sugar-free vehicles with CFZ tablets using a simple method that can be used in a routine pharmacy. Suspensions were stored at room temperature and at 30°C for 30 days. Formulation aliquots were tested on Days 0, 15 and 30 for appearance, pH, potency and microbial counts. RESULTS: Appearance remained unchanged during storage. The pH of both formulations was between 4.0 and 6.0. Potency was between 90% and 110% for 30 days in the syrup formulation and for 15 days in the sugar-free formulation. Microbial counts met United States Pharmacopeia 1111 limits for oral aqueous liquids and specific organisms were absent. CONCLUSIONS: A simple field-friendly method was successfully developed for the preparation of CFZ liquid formulations using commonly available ingredients. This will permit practical dosing and titration for children and other patients with swallowing challenges.

Comparison of pharmacokinetics and bioavailability of bedaquiline fumarate, benzoate and maleate in dogs.

BACKGROUND: Bedaquiline (BDQ) as a fumarate salt is indicated as part of a regimen to treat multidrug-resistant TB (MDR-TB). BDQ benzoate and maleate have been identified as promising alternatives that will encourage generic pharmaceutical houses to manufacture this drug. Our study compared the pharmacokinetics (PK) of BDQ fumarate vs. the maleate and benzoate salts in dogs.METHODS: The PK of BDQ and its active N-desmethyl metabolite M2 following intravenous administration of 1 mg/kg BDQ (as fumarate) and oral administration of 10 mg/kg BDQ as fumarate, benzoate, or maleate salts in suspension to fasted male beagle dogs was evaluated in a parallel-group and crossover study with N = 4 per group. BDQ and M2 plasma concentrations were determined up to 168 h post-dose. T-tests were conducted to compare the area under the curve, AUC0-t among groups.RESULTS: Orally administered fumarate, benzoate, and maleate salts, in parallel-group design, resulted in mean BDQ AUC0-t of 9,267 ± SD 10,182, 19,258 ± SD 11,803, and 15,396 ± SD 9,170 ng.h/ml, respectively; and in a crossover design of 9,267 ± SD 10,182, 17,441 ± SD 24,049, and 18,087 ± SD 19,758 ng.h/ml, respectively. P values were >0.05.CONCLUSION: There was no statistically significant difference in BDQ and M2 AUC0-t following oral administration of fumarate, benzoate and maleate salts in dogs.

Sugar and sugar-free liquid formulations of delamanid for patients with rifampicin-resistant TB.

BACKGROUND: Delamanid (DLM) tablets are recommended for the treatment of rifampicin-resistant TB. However, no liquid or dispersible tablet formulation of DLM is currently commercially available for patients with challenges ingesting these tablets. The aim of this study was to develop stable extemporaneous liquid formulations of DLM that can be stored at room temperature for several weeks.METHODS: DLM tablets were suspended in 1) simple syrup and 2) a specially formulated sugar-free vehicle. These suspensions containing DLM 5 mg/mL were stored in plastic prescription bottles at room temperature or 30°C for 30 days. These suspensions were evaluated for appearance, potency, pH, and microbial counts at Days 0, 15, and 30.RESULTS: The potency of DLM in each formulation remained at 98-104% of the theoretical concentration for 30 days. The appearance, pH, and microbial count did not change for the sugar-free formulation during the 30-day storage period. Microbial growth, however, was observed in the simple syrup formulation on Day 30 but not on Day 15.CONCLUSION: DLM can be formulated in sugar or sugar-free suspensions and stored at room temperature or 30°C for at least 15 and 30 days, respectively.

Stable sugar and sugar-free suspensions of pretomanid.

BACKGROUND: Pretomanid (PMD) tablets are indicated as part of a combination regimen for the treatment of adults with pulmonary extensively drug-resistant, treatment-intolerant or non-responsive multidrug-resistant TB. No commercial liquid formulation is currently available for patients unable to swallow these tablets.OBJECTIVE: To develop stable extemporaneous liquid formulations of PMD that can be stored at room temperature or 30°C for at least 4 weeks.METHODS: Crushed PMD tablets were formulated into 20 mg/mL suspensions in a simple syrup and sugar-free formulation. The PMD formulations were stored at room temperature and at 30°C for 30 days in dispensing bottles. Appearance, pH, potency and microbial counts of the suspensions were determined on Days 0, 15 and 30.RESULTS: The potency of PMD remained at 99.7-103.4% of the theoretical concentration in each formulation. The appearance, pH and microbial count did not change during the 30-day storage period. Simple syrup formulations did not require preservatives for microbial stability.CONCLUSIONS: PMD oral suspension formulations in simple syrup or in sugar-free vehicle were easily prepared by utilising commonly available equipment and ingredients and were stable for 30 days. These formulations are appropriate alternatives for patients with swallowing difficulties.

Evaluation of biodegradable microspheres as vaccine adjuvant for hepatitis B surface antigen.

Biodegradable microspheres were evaluated as vaccine adjuvants based on their ability to provide prolonged release of incorporated agents. Hepatitis B surface antigen (HBSA) prepared by recombinant DNA technology was chosen as a model antigen and encapsulated into polyglycolic acid (PGA) by solvent extraction and solvent evaporation techniques. Five microsphere formulations were prepared to evaluate effect of microsphere size and the presence of immunostimulants such as muramyl dipeptide (MDP) or aluminum hydroxide. The microspheres were characterized for size distribution, surface morphology and antigenicity. Guinea pigs were chosen as the animal model for evaluation of antigenicity of the formulations. The animals were divided into seven groups of four animals each and the microsphere formulations were injected intraperitoneally, using alum adsorbed HBSA as positive control and placebo microspheres as negative control. Blood samples were withdrawn from the animals by toe clipping at two, four, six and sixteen weeks and plasma was analyzed for antibodies against hepatitis B by an enzyme linked immunoassay. At sixteen weeks, the animals were reinjected and evaluated for antibody response at two, four and six weeks post second injection. Antibody response to the microspheres was higher than control. Smaller size microspheres elicited earlier antibody response while the larger size microspheres provided delayed and longer duration of antibody production. Microspheres with MDP potentiated the antibody response. The results demonstrate the applicability of biodegradable microspheres for immunization against hepatitis B.

Optimization and validation of analytical conditions for bovine serum albumin using capillary electrophoresis.

A quick and reproducible capillary electrophoresis method was optimized and validated for the assay of bovine serum albumin (BSA). The effects of various parameters such as pH of buffer, concentration of buffer, capillary dimensions, use of coated capillaries, and additives such as surfactants and protein solubilizers were evaluated. The capillary coatings or additives did not give any advantage in reducing the surface adsorption of BSA on the capillary walls. The optimized conditions include use of borate buffer, pH 8.5 having a concentration of 150 mM in a 27 cm capillary with an aperture window of 100 x 200 microns for detection. The optimized method for the detection of BSA was validated. The interday and intraday coefficient of variation was not greater than 7.59% at BSA concentrations of 25-1000 micrograms/ml. The method developed was reproducible and accurate.