Recording the tactile P300 with the cEEGrid for potential use in a brain-computer interface.

Brain-computer interfaces (BCIs) are scientifically well established, but they rarely arrive in the daily lives of potential end-users. This could be in part because electroencephalography (EEG), a prevalent method to acquire brain activity for BCI operation, is considered too impractical to be applied in daily life of end-users with physical impairment as an assistive device. Hence, miniaturized EEG systems such as the cEEGrid have been developed. While they promise to be a step toward bridging the gap between BCI development, lab demonstrations, and home use, they still require further validation. Encouragingly, the cEEGrid has already demonstrated its ability to record visually and auditorily evoked event-related potentials (ERP), which are important as input signal for many BCIs. With this study, we aimed at evaluating the cEEGrid in the context of a BCI based on tactually evoked ERPs. To compare the cEEGrid with a conventional scalp EEG, we recorded brain activity with both systems simultaneously. Forty healthy participants were recruited to perform a P300 oddball task based on vibrotactile stimulation at four different positions. This tactile paradigm has been shown to be feasible for BCI repeatedly but has never been tested with the cEEGrid. We found distinct P300 deflections in the cEEGrid data, particularly at vertical bipolar channels. With an average of 63%, the cEEGrid classification accuracy was significantly above the chance level (25%) but significantly lower than the 81% reached with the EEG cap. Likewise, the P300 amplitude was significantly lower (cEEGrid R2-R7: 1.87 µV, Cap Cz: 3.53 µV). These results indicate that a tactile BCI using the cEEGrid could potentially be operated, albeit with lower efficiency. Additionally, participants' somatosensory sensitivity was assessed, but no correlation to the accuracy of either EEG system was shown. Our research contributes to the growing amount of literature comparing the cEEGrid to conventional EEG systems and provides first evidence that the tactile P300 can be recorded behind the ear. A BCI based on a thus simplified EEG system might be more readily accepted by potential end-users, provided the accuracy can be substantially increased, e.g., by training and improved classification.

The challenge of providing medical follow-up for sexual assault victims: can we predict who will attend? A retrospective cross-sectional study.

This study examined the impact of a pathway between a sexual assault service and a public sexual health service developed to improve rates of post-sexual assault medical follow-up. Follow-up attendances improved in the first 12months of the pathway (2014) compared with attendances in 2013 (17.8%vs 9.6%, P =0.01). Factors independently associated with attendance at follow-up were being prescribed HIV post-exposure prophylaxis and knowing the assailant. Those with physical injuries were less likely to attend. The prevalence of sexually transmissible infections in this cohort, 8% at the acute presentation and 5% at follow-up, suggests a need for alternatives to clinic-based follow-up.

[Immune reaction after penetrating keratoplasty depending on graft size and centration]. / Immunreaktion nach perforierender Keratoplastik in Abhängigkeit von der Transplantatgröße und -zentrierung.

BACKGROUND: Immune reaction (IR) after penetrating keratoplasty (PKP) is a serious complication with a high risk of graft failure. The aim of this study was to analyze and evaluate the risk factors for IR, in particular, the influence of graft size and centration. PATIENTS AND METHODS: A total of 2133 patients who underwent PKP between January 2009 and July 2019 were included in this retrospective study. The following endpoints were analyzed: frequency of IR, graft origin, donor and patient age, diagnosis, corneal diameter and ratio of the graft size to the recipient cornea size. In addition, the role of graft centration, with the help of distance measurements of the graft margins to the vascularized limbus at four locations, was investigated in detail. RESULTS: Overall, 8.25% of patients suffered from IR during the observational period. The frequency of IR was significantly correlated (p < 0.001) with the ratio of the graft size to the recipient cornea size. In addition, a statistically significant correlation was found between the occurrence of IR and a small distance to the limbal margins in the Y­axis (inferior and superior). In particular, the correlation coefficient was larger at the inferior limbus (p < 0.001). CONCLUSION: An IR after PKP is a not uncommon complication and is significantly related to graft size and centration. A large graft chosen in relation to the recipient cornea and the proximity of the graft to the vascularized limbus at the inferior and superior sites significantly correlate with the occurrence of IR. These are important risk factors for graft survival, which can be influenced by the corneal microsurgeon and could possibly be further optimized in the future.

Exponential Bhatnagar-Gross-Krook integrator for multiscale particle-based kinetic simulations.

Despite the development of an extensive toolbox of multiscale rarefied flow simulators, such simulations remain challenging due to the significant disparity of collisional and macroscopic spatiotemporal scales. Our study offers a novel and consistent numerical scheme for a coupled treatment of particles advection and collision governed by the BGK evolution, honoring positivity of the velocity distribution. Our method shares its framework, in spirit, with the unified gas kinetic class of multiscale schemes. Yet it provides attractive features for particle-based stochastic simulations, readily implementable to existing direct simulation Monte Carlo codes. Two main innovations are integrated in the presented BGK particle method. The first ingredient is a high-order time integration that can be interpreted probabilistically, independent of the time step size. The next one is identifying modified particle distributions that remain invariant under the advection-relaxation evolution. We demonstrate accuracy and performance of the devised scheme for prototypic gas flows over a wide range of rarefaction parameters. Due to the resulting robustness and flexibility of the devised exponential BGK integrator, the scheme paves the way towards more affordable simulations of large-scale and multiscale rarefied gas phenomena.

Ultrafast optical ranging using microresonator soliton frequency combs.

Light detection and ranging is widely used in science and industry. Over the past decade, optical frequency combs were shown to offer advantages in optical ranging, enabling fast distance acquisition with high accuracy. Driven by emerging high-volume applications such as industrial sensing, drone navigation, or autonomous driving, there is now a growing demand for compact ranging systems. Here, we show that soliton Kerr comb generation in integrated silicon nitride microresonators provides a route to high-performance chip-scale ranging systems. We demonstrate dual-comb distance measurements with Allan deviations down to 12 nanometers at averaging times of 13 microseconds along with ultrafast ranging at acquisition rates of 100 megahertz, allowing for in-flight sampling of gun projectiles moving at 150 meters per second. Combining integrated soliton-comb ranging systems with chip-scale nanophotonic phased arrays could enable compact ultrafast ranging systems for emerging mass applications.

[DGP Interstitial Lung Disease Patient Questionnaire]. / Patientenfragebogen zur Erfassung der Ursachen interstitieller und seltener Lungenerkrankungen ­ klinische Sektion der DGP.

BACKGROUND: Interstitial lung diseases (ILD) encompass different heterogeneous, mainly chronic diseases of the pulmonary interstitium and/or alveoli with known and unknown reasons. The diagnostic of ILD is challenging and should be performed interdisciplinary. The medical history is of major importance and therefore, in German-speaking countries the Frankfurter Bogen (published in 1985) was utilised to scrutinise the medical history of the patient. This by now more than 30-years-old questionnaire requires a revision with regard to content and language. METHOD: Under the auspices of the clinical section of the DGP the new Interstitial Lung Disease Patient Questionnaire was developed in collaboration amongst pulmonologist, occupational medicine physicians and psychologists and supported by patient support groups. The questionnaire was finally optimised linguistically with the help of patients. RESULTS: The newly developed patient questionnaire for interstitial and rare lung diseases encompasses different domains: initial and current symptoms, medical history questions including prior drug treatments, previous pulmonary and extrapulmonary diseases, potential exposition at home, work and leisure time as well as family history and travelling. CONCLUSION: The newly developed questionnaire can facilitate the diagnosis in patients with suspicion on interstitial lung disease in clinical routine.

Indian Ocean corals reveal crucial role of World War II bias for twentieth century warming estimates.

The western Indian Ocean has been warming faster than any other tropical ocean during the 20th century, and is the largest contributor to the global mean sea surface temperature (SST) rise. However, the temporal pattern of Indian Ocean warming is poorly constrained and depends on the historical SST product. As all SST products are derived from the International Comprehensive Ocean-Atmosphere dataset (ICOADS), it is challenging to evaluate which product is superior. Here, we present a new, independent SST reconstruction from a set of Porites coral geochemical records from the western Indian Ocean. Our coral reconstruction shows that the World War II bias in the historical sea surface temperature record is the main reason for the differences between the SST products, and affects western Indian Ocean and global mean temperature trends. The 20th century Indian Ocean warming pattern portrayed by the corals is consistent with the SST product from the Hadley Centre (HadSST3), and suggests that the latter should be used in climate studies that include Indian Ocean SSTs. Our data shows that multi-core coral temperature reconstructions help to evaluate the SST products. Proxy records can provide estimates of 20th century SST that are truly independent from the ICOADS data base.

National Beef Quality Audit - 2016: Survey of carcass characteristics through instrument grading assessments.

The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.

National Beef Quality Audit-2016: In-plant survey of carcass characteristics related to quality, quantity, and value of fed steers and heifers.

The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.

Making Graphene Nanoribbons Photoluminescent.

We demonstrate the alignment-preserving transfer of parallel graphene nanoribbons (GNRs) onto insulating substrates. The photophysics of such samples is characterized by polarized Raman and photoluminescence (PL) spectroscopies. The Raman scattered light and the PL are polarized along the GNR axis. The Raman cross section as a function of excitation energy has distinct excitonic peaks associated with transitions between the one-dimensional parabolic subbands. We find that the PL of GNRs is intrinsically low but can be strongly enhanced by blue laser irradiation in ambient conditions or hydrogenation in ultrahigh vacuum. These functionalization routes cause the formation of sp3 defects in GNRs. We demonstrate the laser writing of luminescent patterns in GNR films for maskless lithography by the controlled generation of defects. Our findings set the stage for further exploration of the optical properties of GNRs on insulating substrates and in device geometries.

Acute effects of psychological relaxation techniques between two physical tasks.

The concept of recovery strategies includes various ways to achieve a state of well-being, prevent underrecovery syndromes from occurring and re-establish pre-performance states. A systematic application of individualised relaxation techniques is one of those. Following a counterbalanced cross-over design, 27 sport science students (age 25.22 ± 1.08 years; sports participation 8.08 ± 3.92 h/week) were randomly assigned to series of progressive muscle relaxation, systematic breathing, power nap, yoga, and a control condition. Once a week, over the course of five weeks, their repeated sprint ability was tested. Tests (6 sprints of 4 s each with 20 s breaks between them) were executed on a non-motorised treadmill twice during that day intermitted by 25 min breaks. RM-ANOVA revealed significant interaction effects between the relaxation conditions and the two sprint sessions with regard to average maximum speed over all six sprints, F(4,96) = 4.06, P = 0.004, [Formula: see text] = 0.15. Post-hoc tests indicated that after systematic breathing interventions, F(1,24) = 5.02, P = 0.033, [Formula: see text] = 0.18, participants performed significantly better compared to control sessions. As the focus of this study lied on basic mechanisms of relaxation techniques in sports, this randomised controlled trial provides us with distinct knowledge on their effects, i.e., systematic breathing led to better performances, and therefore, seems to be a suited relaxation method during high-intensity training.

National Beef Quality Audit-2016: Transportation, mobility, and harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and by-products.

The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.

National Beef Quality Audit-2016: Transportation, mobility, live cattle, and carcass assessments of targeted producer-related characteristics that affect value of market cows and bulls, their carcasses, and associated by-products.

The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.

A change in coral extension rates and stable isotopes after El Niño-induced coral bleaching and regional stress events.

Coral reefs are biologically diverse ecosystems threatened with effective collapse under rapid climate change, in particular by recent increases in ocean temperatures. Coral bleaching has occurred during major El Niño warming events, at times leading to the die-off of entire coral reefs. Here we present records of stable isotopic composition, Sr/Ca ratios and extension rate (1940-2004) in coral aragonite from a northern Venezuelan site, where reefs were strongly impacted by bleaching following the 1997-98 El Niño. We assess the impact of past warming events on coral extension rates and geochemical proxies. A marked decrease in coral (Pseudodiploria strigosa) extension rates coincides with a baseline shift to more negative values in oxygen and carbon isotopic composition after 1997-98, while a neighboring coral (Siderastrea siderea) recovered to pre-bleaching extension rates simultaneously. However, other stressors, besides high temperature, might also have influenced coral physiology and geochemistry. Coastal Venezuelan reefs were exposed to a series of extreme environmental fluctuations since the mid-1990s, i.e. upwelling, extreme rainfall and sediment input from landslides. This work provides important new data on the potential impacts of multiple regional stress events on coral isotopic compositions and raises questions about the long-term influence on coral-based paleoclimate reconstructions.

Higher order mode suppression in high-Q anomalous dispersion SiN microresonators for temporal dissipative Kerr soliton formation.

High-Q silicon nitride (SiN) microresonators enable optical Kerr frequency comb generation on a photonic chip and have recently been shown to support fully coherent combs based on temporal dissipative Kerr soliton formation. For bright soliton formation, it is necessary to operate SiN waveguides in the multimode regime in order to produce waveguide induced anomalous group velocity dispersion. However, this regime can lead to local disturbances of the dispersion due to avoided crossings caused by coupling between different mode families and, therefore, prevent the soliton formation. Here, we demonstrate that a single-mode "filtering" section inside high-Q resonators enables efficiently suppression of avoided crossings, while preserving high quality factors (Q∼10(6)). We verify the approach by demonstrating single soliton formation in SiN resonators with a filtering section.

Photonic chip-based optical frequency comb using soliton Cherenkov radiation.

Optical solitons are propagating pulses of light that retain their shape because nonlinearity and dispersion balance each other. In the presence of higher-order dispersion, optical solitons can emit dispersive waves via the process of soliton Cherenkov radiation. This process underlies supercontinuum generation and is of critical importance in frequency metrology. Using a continuous wave-pumped, dispersion-engineered, integrated silicon nitride microresonator, we generated continuously circulating temporal dissipative Kerr solitons. The presence of higher-order dispersion led to the emission of red-shifted soliton Cherenkov radiation. The output corresponds to a fully coherent optical frequency comb that spans two-thirds of an octave and whose phase we were able to stabilize to the sub-Hertz level. By preserving coherence over a broad spectral bandwidth, our device offers the opportunity to develop compact on-chip frequency combs for frequency metrology or spectroscopy.

[Surgical Treatment of Medial Epicanthus by Skin Replacement]. / Chirurgische Behandlung des medialen Epikanthus durch Hautersatz.

Epicanthus is a skin fold covering the inner angle of the eyelid. This fold is typical in the Asian population. It can be observed in a great variety of degrees. In the Caucasian population, epicanthus is associated with some syndromes, such as blepharophimosis syndrome and Down's syndrome. The epicanthal fold originates from excessive tension in the skin and is caused by skin deficit and/or by bridging subcutaneous tissue. The epicanthal fold can be surgically corrected by reducing tension and fully replacing the skin defect by skin redraping or skin grafting.

[Perioperative risk and mortality after major surgery]. / Perioperatives Risiko und Letalität nach großen chirurgischen Eingriffen.

Although anesthesia-associated mortality has been significantly reduced down to 0.00068-0.00082% over the last decades, recent studies have revealed a high perioperative mortality of 0.8- 4%. Apart from anesthesia and surgery-induced major complications, perioperative mortality is primarily negatively influenced by individual patient comorbidities. These risk factors predispose for acute critical incidents (e.g., myocardial infarction); however, the majority of fatal complications are a result of slowly progressing conditions, particularly infections or the sequelae of systemic inflammation. This implicates a broad window of opportunity for the detection and treatment of slow-onset complications to improve the perioperative outcome. The term "failure to rescue" (FTR), i.e., the proportion of patients who die from major complications compared to the number of all patients with complications, has been introduced as a valid indicator for the quality of perioperative care. Growing evidence has already shown that FTR is an underestimated factor in perioperative medicine accounting for or at least being involved in the development of postoperative mortality. While the incidence of severe postoperative complications amazingly does not show much variation between hospitals, FTR shows significant differences implying a major potential for improvement. With 14 million surgical procedures per year in Germany, a postoperative mortality of approximately 1% and an avoidable FTR rate of 40% mean that there are an estimated 60,000 preventable deaths per year. Hence, in the future it will be imperative to (1) identify patients at risk, (2) to prevent the development of postoperative complications with the use of adequate adjunctive therapeutic strategies, (3) to establish surveillance and monitoring systems for the early detection of postoperative complications and (4) to treat postoperative complications efficiently and in time when they arise.

All-optical stabilization of a soliton frequency comb in a crystalline microresonator.

We demonstrate the all-optical stabilization of a low-noise temporal soliton based microresonator based optical frequency comb in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser coupled to an auxiliary optical resonator mode. The carrier-envelope offset frequency is controlled by stabilizing the pump laser frequency to a reference optical frequency comb. We analyze the stabilization by performing an out-of-loop comparison and measure the overlapping Allan deviation. This all-optical stabilization technique can prove useful as an actuator for self-referenced microresonator frequency combs.