Identification of MAGI1 as a tumor-suppressor protein induced by cyclooxygenase-2 inhibitors in colorectal cancer cells.

Cyclooxyganase-2 (COX-2), a rate-limiting enzyme in the prostaglandin synthesis pathway, is overexpressed in many cancers and contributes to cancer progression through tumor cell-autonomous and paracrine effects. Regular use of non-steroidal anti-inflammatory drugs or selective COX-2 inhibitors (COXIBs) reduces the risk of cancer development and progression, in particular of the colon. The COXIB celecoxib is approved for adjunct therapy in patients with Familial adenomatous polyposis at high risk for colorectal cancer (CRC) formation. Long-term use of COXIBs, however, is associated with potentially severe cardiovascular complications, which hampers their broader use as preventive anticancer agents. In an effort to better understand the tumor-suppressive mechanisms of COXIBs, we identified MAGUK with Inverted domain structure-1 (MAGI1), a scaffolding protein implicated in the stabilization of adherens junctions, as a gene upregulated by COXIB in CRC cells and acting as tumor suppressor. Overexpression of MAGI1 in CRC cell lines SW480 and HCT116 induced an epithelial-like morphology; stabilized E-cadherin and ß-catenin localization at cell-cell junctions; enhanced actin stress fiber and focal adhesion formation; increased cell adhesion to matrix proteins and suppressed Wnt signaling, anchorage-independent growth, migration and invasion in vitro. Conversely, MAGI1 silencing decreased E-cadherin and ß-catenin localization at cell-cell junctions; disrupted actin stress fiber and focal adhesion formation; and enhanced Wnt signaling, anchorage-independent growth, migration and invasion in vitro. MAGI1 overexpression suppressed SW480 and HCT116 subcutaneous primary tumor growth, attenuated primary tumor growth and spontaneous lung metastasis in an orthotopic model of CRC, and decreased the number and size of metastatic nodules in an experimental model of lung metastasis. Collectively, these results identify MAG1 as a COXIB-induced inhibitor of the Wnt/ß-catenin signaling pathway, with tumor-suppressive and anti-metastatic activity in experimental colon cancer.

Response of fibroblast activity and polyelectrolyte multilayer films coating titanium.

OBJECTIVES: The study of surface properties is a recent and crucial issue in the biomaterial fields applied to Odontology. The reference biomaterial in dental implantology is titanium. The principal objective is a perfect bio-integration in the oral ecosystem, both in terms of mucosal and bone tissues. The aim of this work was to optimize the tissue-titanium interface by applying polyelectrolyte multilayer films on the surface of titanium. METHODS: The experimental study was undertaken on pure titanium samples. Two types of film ending with polycations or polyanions were selected. Both film types were built with a first poly(ethyleneimine) (PEI) base layer and composed either of poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH) or of hyaluronic acid (HA) and poly(l-lysine) (PLL) layers. Final architectures were as follows: PEI-(PSS/PAH)(10), or PEI-(PSS/PAH)(10)-PSS, or chemically cross-linked PEI-(HA/PLL)(10) or PEI-(HA/PLL)(10)-HA. An analysis of the physicochemical characteristics of the surfaces was carried out by tensiometry measurements (dynamic contact angle, wettability, contact angle hysteresis) and atomic force microscopy. A biological study with human fibroblasts was followed over a 7-day culture period at days 0, 2, 4 and 7 to observe the cellular response in terms of morphology (scanning electron microscopy) and viability (Mosmann's test). RESULTS: The results showed that polyelectrolyte multilayer films could be successfully deposited onto titanium as previously described for glass or composite. Fibroblast adhesion and proliferation was strongly dependent on film type. SEM observations of cells on the different films agreed with the viability cell test. Furthermore, films containing PSS/PAH generated a better cellular response than films containing cross-linked HA/PLL. CONCLUSION: PSS/PAH polyelectrolyte films coating titanium could represent a new approach for oral bio-integration with great potential for clinical application in the fields of dental implantology. More particularly, the specific biofunctionalization of PSS/PAH films coating titanium could be envisioned by introducing layers of molecules that encourage the bio-integration process between the films.

Immobilization of E. coli bacteria in three-dimensional matrices for ISFET biosensor design.

In recent years, cell-based biosensors (CBBs) have been very useful in biomedicine, food industry, environmental monitoring and pharmaceutical screening. They constitute an economical substitute for enzymatic biosensors, but cell immobilization remains a limitation in this technology. To investigate into the potential applications of cell-based biosensors, we describe an electrochemical system based on a microbial biosensor using an Escherichia coli K-12 derivative as a primary transducer to detect biologically active agents. pH variations were recorded by an ion-sensitive field effect transistor (ISFET) sensor on bacteria immobilized in agarose gels. The ISFET device was directly introduced in 100 ml of this mixture or in a miniaturized system using a dialysis membrane that contains 1 ml of the same mixture. The bacterial activity could be detected for several days. The extracellular acidification rate (ECAR) was analyzed with or without the addition of a culture medium or an antibiotic solution. At first, the microorganisms acidified their micro-environment and then they alkalinized it. These two phases were attributed to an apparent substrate preference of bacteria. Cell treatment with an inhibitor or an activator of their metabolism was then monitored and streptomycin effect was tested.

Distinctive role of integrin-mediated adhesion in TNF-induced PKB/Akt and NF-kappaB activation and endothelial cell survival.

Tumor necrosis factor (TNF) is a pro-inflammatory cytokine exerting pleiotropic effects on endothelial cells. Depending on the vascular context it can induce endothelial cell activation and survival or death. The microenvironmental cues determining whether endothelial cells will survive or die, however, have remained elusive. Here we report that integrin ligation acts permissive for TNF-induced protein kinase B (PKB/Akt) but not nuclear factor (NF)-kappaB activation. Concomitant activation of PKB/Akt and NF-kappaB is essential for the survival of endothelial cells exposed to TNF. Active PKB/Akt strengthens integrin-dependent endothelial cell adhesion, whereas disruption of actin stress fibers abolishes the protective effect of PKB/Akt. Integrin-mediated adhesion also represses TNF-induced JNK activation, but JNK activity is not required for cell death. The alphaVbeta3/alphaVbeta5 integrin inhibitor EMD121974 sensitizes endothelial cells to TNF-dependent cytotoxicity and active PKB/Akt attenuates this effect. Interferon gamma synergistically enhanced TNF-induced endothelial cell death in all conditions tested. Taken together, these observations reveal a novel permissive role for integrins in TNF-induced PKB/Akt activation and prevention of TNF-induced death distinct of NF-kappaB, and implicate the actin cytoskeleton in PKB/Akt-mediated cell survival. The sensitizing effect of EMD121974 on TNF cytotoxicity may open new perspectives to the therapeutic use of TNF as anticancer agent.

Influence of autoclave sterilization on the surface parameters and mechanical properties of six orthodontic wires.

Orthodontic wires are frequently packaged in individual sealed bags in order to avoid cross-contamination. The instructions on the wrapper generally advise autoclave sterilization of the package and its contents if additional protection is desired. However, sterilization can modify the surface parameters and the mechanical properties of many types of material. The aim of this research was to determine the influence of one of the most widely used sterilization processes, autoclaving (18 minutes at 134 degrees C, as recommended by the French Ministry of Health), on the surface parameters and mechanical properties of six wires currently used in orthodontics (one stainless steel alloy: Tru-Chrome RMO; two nickel-titanium shape memory alloys: Neo Sentalloy and Neo Sentalloy with Ionguard GAC; and three titanium-molybdenum alloys: TMA(R) and Low Friction TMA Ormco and Resolve GAC). The alloys were analysed on receipt and after sterilization, using surface structure observation techniques, including optical, scanning electron and atomic force microscopy and profilometry. The mechanical properties were assessed by three-point bending tests. The results showed that autoclave sterilization had no adverse effects on the surface parameters or on the selected mechanical properties. This supports the possibility for practitioners to systematically sterilize wires before placing them in the oral environment.

[Evaluation of orthodontic friction using a tribometer with alternating movement]. / Evaluation du frottement orthodontique par un tribomètre a mouvement alternatif.

It is essential for orthodontists to control the complex phenomenon of friction. The in vitro techniques, usually dynamometers or tensile testing machines, used to measure the frictional resistance between arch wires and brackets are linear and unidirectional and can be criticised because tooth movements, such as tipping and uprighting, as well everyday oral activities, primarily chewing, are not uni-dimensional but more closely resemble the small amplitude oscillatory phenomena known as fretting. We therefore decided to develop a fretting machine not with linear but with alternating movements better suited to evaluate the frictional behaviour of orthodontic bracket-wire combinations. Once we had completed construction of this device, we proceeded to measure the frictional resistance between one stainless steel bracket (MicroArch GAC) and five wires currently used in orthodontics (Two nickel-titanium shape memory alloys: Neo Sentalloy and Neo Sentalloy with Ionguard GAC--Three titanium-molybdenum alloys: TMA and Low Friction TMA Ormco and Resolve GAC). We were able to set up a classification of the wires according to their coefficient of friction, demonstrating the inefficacy of ion implantation and quantifying the increase in the coefficient of friction which occurs when Resolve wires are placed in the oral environment for approximately one year.

Characterization of nanophase Al-oxide/Al powders by electron energy-loss spectroscopy.

Al nanoparticles were prepared by the inert gas condensation method. After passivation with oxygen and air exposure we obtained a powdered sample of an Al-oxide/Al nanocomposite material. In the present paper we describe the use of the electron energy-loss spectroscopy (EELS) technique in a transmission electron microscope to characterize such nanostructured powders compared with a microcrystalline commercial aluminium foil. Energy-filtered images showed the presence of an alumina overlayer of approximately 4 nm covering the aluminium nanoparticles (23 nm in diameter). EELS analysis enabled us to determine the total amount of Al2O3 and metallic Al and the structure of the alumina passivation overlayer in the sample. In particular, the extended energy-loss fine structure analysis of the data showed a major presence of Al tetrahedrally coordinated with oxygen in the alumina passivation layer of Al nanoparticles instead of the octahedral coordination found for a conventional Al foil. This surprising effect has been attributed to the nanoscopic character of the grains. The analysis of the electron-loss near-edge structure also determines the presence of a certain degree of aggregation in this kind of powdered sample as result of the coalescence of the nanocrystalline grains. The procedure presented here may have the potential to solve other problems during characterization of nanostructured materials.

Adhesion-related glycocalyx study: quantitative approach with imaging-spectrum in the energy filtering transmission electron microscope (EFTEM).

Large polysaccharide molecules composing the glycocalyx have been shown to prevent cell adhesion. However, this process was not observed microscopically. Terbium labeling, combined with a new quantitative imaging method based on electron energy loss spectroscopy, allowed specific glycocalyx staining with excellent contrast. Image analysis enabled us to compare glycocalyx structure in free membrane areas and contacts between monocytic cells and bound erythrocytes. Apparent glycocalyx thickness, in contact areas, was half of the sum of glycocalyx thicknesses in free areas without label density increase. Ultrastructural immunogold localization of CD43 molecules, a major component of glycocalyx, was also demonstrated to be excluded from contact areas during adhesion. Thus, both approaches strongly suggest that some glycocalyx elements must exit from contact to allow binding of adhesion molecules.