RESUMO
HYPOTHESIS: Antimicrobial resistance (AMR) is a pressing global health concern. ESKAPEE pathogens, such as Methicillin-resistant Staphylococcus aureus (MRSA) are notable of concern in healthcare settings due to their resistance to critical antibiotics. To combat AMR, the development of alternatives such as bacterial membrane-active agents is crucial. Fatty acids (FAs) have emerged as a sustainable, antibiotic-free solution with inherent antibacterial activity. However, long chain saturated fatty acids (LCFAs) sodium soaps exhibit poorly antibacterial properties in comparison to short chain FAs, believed to be linked to limited solubility in aqueous media. EXPERIMENTS: We employed choline as a chaotropic organic counter-ion to enhance the solubility of LCFAs and investigated their antibacterial effects against MRSA. The optimal medium conditions for micelle formation for LCFAs was first investigated. Then, we determined the critical micelle concentration (CMC), micellar morphology, and aggregation number through surface tension measurements and small angle neutron scattering experiments. Antimicrobial activity was assessed using minimum bactericidal concentration (MBC) assays and time-kill experiments. FINDINGS: We have identified conditions where LCFAs are effective against MRSA for the first time, providing valuable insights for developing new antibacterial agents to fight AMR. LCFAs need to be used above their Krafft temperatures and CMC to exhibit antibacterial efficacy.
RESUMO
Proteins are adjustable units from which biomaterials with designed properties can be developed. However, non-native folded states with controlled topologies are hardly accessible in aqueous environments, limiting their prospects as building blocks. Here, we demonstrate the ability of a series of anhydrous deep eutectic solvents (DESs) to precisely control the conformational landscape of proteins. We reveal that systematic variations in the chemical composition of binary and ternary DESs dictate the stabilization of a wide range of conformations, that is, compact globular folds, intermediate folding states, or unfolded chains, as well as controlling their collective behavior. Besides, different conformational states can be visited by simply adjusting the composition of ternary DESs, allowing for the refolding of unfolded states and vice versa. Notably, we show that these intermediates can trigger the formation of supramolecular gels, also known as eutectogels, where their mechanical properties correlate to the folding state of the protein. Given the inherent vulnerability of proteins outside the native fold in aqueous environments, our findings highlight DESs as tailorable solvents capable of stabilizing various non-native conformations on demand through solvent design.
Assuntos
Géis , Dobramento de Proteína , Proteínas , Solventes , Solventes/química , Proteínas/química , Géis/química , Conformação ProteicaRESUMO
HYPOTHESIS: Organohydrogel emulsions display unique rheological properties and contain hydrophilic and lipophilic domains highly desirable for the loading of active compounds. They find utility in various applications from food to pharmaceuticals and cosmetic products. The current systems have limited applications due to complex expensive formulation and/or processing difficulties in scale-up. To solve these issues, a simple emulsification process coupled with unique compounds are required. EXPERIMENTS: Here, we report an organohydrogel emulsion based only on a low concentration of 12-hydroxystearic acid acting as a gelling agent for both oil and water phases but also as a surfactant. The emulsification process is based on in-situ surfactant transfer. We characterize the emulsification process occurring at the nanoscale by using tensiometry experiments. The emulsion structure was determined by coupling Small Angle X-ray and neutron scattering, and confocal Raman microscopy. FINDINGS: We demonstrate that the stability and unique rheological properties of these emulsions come from the presence of self-assembled crystalline structures of 12-hydroxystearic acid in both liquid phases. The emulsion properties can be tuned by varying the emulsion composition over a wide range. These gelled emulsions are prepared using a low energy method offering easy scale-up at an industrial level.
RESUMO
Lamellarity and shape are important factors in the formation of vesicles and determine their role in biological systems and pharmaceutical applications. Cardiolipin (CL) is a major lipid in many biological membranes and exerts a great influence on their structural organization due to its particular structure and physico-chemical properties. Here, we used small-angle X-ray and neutron scattering to study the effects of CL with different acyl chain lengths and saturations (CL14:0, CL18:1, CL18:2) on vesicle morphology and lamellarity in membrane models containing mixtures of phosphatidylcholine and phosphatidylethanolamine with different acyl chain lengths and saturations (C14:0 and C 18:1). Measurements were performed in the presence of Phosphate Buffer Saline (PBS), at 37°C, to better reflect physiological conditions, which resulted in strong effects on vesicle morphology, depending on the type and amount of CL used. The presence of small quantities of CL (from 2.5%) reduced inter-membrane correlations and increased perturbation of the membrane, an effect which is enhanced in the presence of matched shorter saturated acyl chains, and mainly unilamellar vesicles (ULV) are formed. In extruded vesicles, employed for SANS experiments, flattened vesicles are observed partly due to the hypertonic effect of PBS, but also influenced by the type of CL added. Our experimental data from SAXS and SANS revealed a strong dependence on CL content in shaping the membrane microstructure, with an apparent optimum in the PC:CL mixture in terms of promoting reduced correlations, preferred curvature and elongation. However, the use of PBS caused distinct differences from previously published studies in water in terms of vesicle shape, and highlights the need to investigate vesicle formation under physiological conditions in order to be able to draw conclusions about membrane formation in biological systems.
Assuntos
Cardiolipinas , Lipossomos , Espalhamento a Baixo Ângulo , Cardiolipinas/química , Lipossomos/química , Fosfatidilcolinas/química , Fosfatidiletanolaminas/química , Difração de Raios X , Tamanho da Partícula , Difração de NêutronsRESUMO
We present the development of a platform of well-defined, dynamic covalent amphiphilic polymer conetworks (APCN) based on an α,ω-dibenzaldehyde end-functionalized linear amphiphilic poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEG-b-PPG-b-PEG, Pluronic) copolymer end-linked with a triacylhydrazide oligo(ethylene glycol) triarmed star cross-linker. The developed APCNs were characterized in terms of their rheological (increase in the storage modulus by a factor of 2 with increase in temperature from 10 to 50 °C), self-healing, self-assembling, and mechanical properties and evaluated as a matrix for gel polymer electrolytes (GPEs) in both the stretched and unstretched states. Our results show that water-loaded APCNs almost completely self-mend, self-organize at room temperature into a body-centered cubic structure with long-range order exhibiting an aggregation number of around 80, and display an exceptional room temperature stretchability of â¼2400%. Furthermore, ionic liquid-loaded APCNs could serve as gel polymer electrolytes (GPEs), displaying a substantial ion conductivity in the unstretched state, which was gradually reduced upon elongation up to a strain of 4, above which it gradually increased. Finally, it was found that recycled (dissolved and re-formed) ionic liquid-loaded APCNs could be reused as GPEs preserving 50-70% of their original ion conductivity.
RESUMO
Silica-based porous liquids (PLs) are innovative and versatile liquid materials with a high potential, although their application is often restricted to gas sorption. In this work, we propose to evaluate their potential to extract metals. For this goal, we have adapted their synthesis to provide PLs functionalized with thiols that are expected to chelate metallic contaminants, such as lead. As the accessibility of liquids and metals to the PL's porous network is one of the key points for their application, we developed an original small-angle neutron scattering experiment to verify that the PL is permeable to polar liquids. Then, preliminary extraction tests have successfully been carried out, with an extraction of lead cations by complexation on one-third of accessible thiol groups. This work demonstrates that the extraction of metal species by a PL is possible and opens many perspectives for optimization.
RESUMO
MOTIVATION: Surfactants like C8E8CH2COOH have such bulky headgroups that they cannot show the common sphere-to-cylinder transition, while surfactants like C18:1E2CH2COOH are mimicking lipids and form only bilayers. Mixing these two types of surfactants allows one to investigate the competition between intramicellar segregation leading to disc-like bicelles and the temperature dependent curvature constraints imposed by the mismatch between heads and tails. EXPERIMENTS: We establish phase diagrams as a function of temperature, surfactant mole ratio, and active matter content. We locate the isotropic liquid-isotropic liquid phase separation common to all nonionic surfactant systems, as well as nematic and lamellar phases. The stability and rheology of the nematic phase is investigated. Texture determination by polarizing microscopy allows us to distinguish between the different phases. Finally, SANS and SAXS give intermicellar distances as well as micellar sizes and shapes present for different compositions in the phase diagrams. FINDINGS: In a defined mole ratio between the two components, intramicellar segregation wins and a viscoelastic discotic nematic phase is present at low temperature. Partial intramicellar mixing upon heating leads to disc growth and eventually to a pseudo-lamellar phase. Further heating leads to complete random mixing and an isotropic phase, showing the common liquid-liquid miscibility gap. This uncommon phase sequence, bicelles, lamellar phase, micelles, and water-poor packed micelles, is due to temperature induced mixing combined with dehydration of the headgroups. This general molecular mechanism explains also why a metastable water-poor lamellar phase quenched by cooling can be easily and reproducibly transformed into a nematic phase by gentle hand shaking at room temperature, as well as the entrapment of air bubbles of any size without encapsulation by bilayers or polymers.
RESUMO
This study examines the structures of soft surfactant-based biomaterials which can be tuned by temperature. More precisely, investigated here is the behavior of stearic acid (SA) and 12-hydroxystearic acid (12-HSA) aqueous mixtures as a function of temperature and the 12-HSA/SA molar ratio (R). Whatever R is, the system exhibits a morphological transition at a given threshold temperature, from multilamellar self-assemblies at low temperature to small micelles at high temperature, as shown by a combination of transmittance measurements, Wide Angle X-ray diffraction (WAXS), small angle neutron scattering (SANS), and differential scanning calorimetry (DSC) experiments. The precise determination of the threshold temperature, which ranges between 20 °C and 50 °C depending on R, allows for the construction of the whole phase diagram of the system as a function of R. At high temperature, the micelles that are formed are oblate for pure SA solutions (R = 0) and prolate for pure 12-HSA solutions (R = 1). In the case of mixtures, there is a progressive continuous transition from oblate to prolate shapes when increasing R, with micelles that are almost purely spherical for R = 0.33.
RESUMO
We have studied the microemulsion and lamellar phases of two of the most commonly described systems based on nonionic C12E5 and ionic AOT surfactants. We show that C12E5 is best described by the symmetric disordered open connected lamellar model (DOC-lamellar), contrary to the more commonly employed standard flexible model. In the case of AOT, the bicontinuous microemulsion structure is best described by the standard flexible model at high temperatures. Around room temperature, connected cylinders in a molten cubic crystal phase are the only description which corresponds to the data. In the lamellar phase, around one third of the available surface area is lost in fluctuations and defects. Comparing structurally predictive models with results from conductivity measurements show that salt adsorption in the hydrated ethoxy groups is dominant for C12E5 (nonionic). For AOT, our conductivity measurements clarify the role of tortuosity versus cation absorption.
RESUMO
The cell-penetrating peptide penetratin and its analogues shuffle and penetramax have been used as carrier peptides for oral delivery of therapeutic peptides such as insulin. Their mechanism of action for this purpose is not fully understood but is believed to depend on the interactions of the peptide with the cell membrane. In the present study, peptide-liposome interactions were investigated using advanced biophysical techniques including small-angle neutron scattering and fluorescence lifetime imaging microscopy. Liposomes were used as a model system for the cell membrane. All the investigated carrier peptides induced liposome clustering at a specific peptide/lipid ratio. However, distinctively different types of membrane interactions were observed, as the liposome clustering was irreversible for penetratin, but fully or partly reversible for shuffle and penetramax, respectively. All three peptides were found to adsorb to the surface of the lipid bilayers, while only shuffle and penetramax led to shape deformation of the liposomes. Importantly, the peptide interactions did not disrupt the liposomes under any of the investigated conditions, which is advantageous for their application in drug delivery. This detailed insight on peptide-membrane interactions is important for understanding the mechanism of peptide-based excipients and the influence of peptide sequence modifications.
Assuntos
Peptídeos Penetradores de Células , Lipossomos , Lipossomos/metabolismo , Adsorção , Excipientes , Proteínas de Transporte/metabolismo , Bicamadas LipídicasRESUMO
Here, we describe the behavior of mixtures of stearic acid (SA) and its hydroxylated counterpart 12-hydroxystearic acid (12-HSA) in aqueous mixtures at room temperature as a function of the 12-HSA/SA mole ratio R. The morphologies of the self-assembled aggregates are obtained through a multi-structural approach that combines confocal and cryo-TEM microscopies with small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS) measurements, coupled with rheology measurements. Fatty acids are solubilized by an excess of ethanolamine counterions, so that their heads are negatively charged. A clear trend towards partitioning between the two types of fatty acids is observed, presumably driven by the favorable formation of a H-bond network between hydroxyl OH function on the 12th carbon. For all R, the self-assembled structures are locally lamellar, with bilayers composed of crystallized and strongly interdigitated fatty acids. At high R, multilamellar tubes are formed. The doping via a low amount of SA molecules slightly modifies the dimensions of the tubes and decreases the bilayer rigidity. The solutions have a gel-like behavior. At intermediate R, tubes coexist in solution with helical ribbons. At low R, local partitioning also occurs, and the architecture of the self-assemblies associates the two morphologies of the pure fatty acids systems: they are faceted objects with planar domains enriched in SA molecules, capped with curved domains enriched in 12-HSA molecules. The rigidity of the bilayers is strongly increased, as well their storage modulus. The solutions remain, however, viscous fluids in this regime.
Assuntos
Ácidos Graxos , Ácidos Esteáricos , Temperatura , Ácidos Esteáricos/química , Ácidos Graxos/química , Microscopia , MicelasRESUMO
HYPOTHESIS: The internal organization of polyelectrolyte layers deposited on colloidal templates plays a very important role for the potential applications of these systems as capsules for drug delivery purposes. EXPERIMENTS: The mutual arrangement of oppositely charged polyelectrolyte layers upon their deposition on positively charged liposomes has been studied by combining up three different scattering techniques and Electronic Spin Resonance, which has provided information about the inter-layer interactions and their effect on the final structure of the capsules. FINDINGS: The sequential deposition of oppositely charged polyelectrolytes on the external leaflet of positively charged liposomes allows modulating the organization of the obtained supramolecular structures, impacting the packing and rigidity of the obtained capsules due to the change of the ionic cross-linking of the multi-layered film as a result of the specific charge of the last deposited layer. The possibility to modulate the properties of the LbL capsules by tuning the characteristics of the last deposited layers offers a very interesting route for the design of materials for encapsulation purposes with their properties controlled almost at will by changing the number of deposited layers and their chemistry.
RESUMO
Oil-in-water (O/W) microemulsions (ME) typically feature a low viscosity and exhibit ordinary viscosity reduction as a function of temperature. However, for certain applications, avoiding or even reverting the temperature trend might be required. This can be conceived by adding thermoresponsive (TR) block copolymers that induce network formation as the temperature increases. Accordingly, various ME-polymer mixtures were studied for which three different block copolymer architectures of BAB*-, B2AB*-, and B(AB*)2-types were employed. Here, "B" represents a permanently hydrophobic, "A" a permanently hydrophilic, and "B*" a TR block. For the TR-block, three different poly(acrylamide)s, namely poly(N-n-propylacrylamide) (pNPAm), poly(N,N-diethylacrylamide) (pDEAm), and poly(N-isopropylacrylamide) (pNiPAm), were used, which all exhibit a lower critical solution temperature. For a well-selected ME concentration, these block copolymers lead to a viscosity enhancement with increasing temperature. At a polymer concentration of about 22 g L-1, the most pronounced enhancement was observed for the pNPAm-based systems with factors up to 3, 5, and 8 for BAB*, B2AB*, and B(AB*)2, respectively. This phenomenon is caused by the formation of a transitory network mediated by TR-blocks, as evidenced by the direct correlation between the attraction strength and the viscosity enhancement. For applications requiring a high hydrophobic payload, which is attained via ME droplets, this kind of tailored temperature-dependent viscosity control of surfactant systems should therefore be advantageous.
RESUMO
MOTIVATION: The monoammonium salt of glycyrrhizic acid (AGA) is known to form fibrillar hydrogels and few studies regarding self-assembly of AGA have been published. Yet, the understanding of the fibrillar microstructures and the gelation remains vague. Thus, we attempt to achieve a deeper understanding of the microstructures and the gelation process of binary solutions of AGA in water. Further, we examine the effect of ethanol on the microstructures to pave the way for potential enhancement of drug loading in AGA hydrogels. EXPERIMENTS: A partial room temperature phase map of the ternary system AGA/ethanol/water was recorded. Small-angle X-ray and neutron scattering experiments were performed over wide ranges of compositions in both binary AGA/water and ternary AGA/ethanol/water mixtures to get access to the micro-structuring. FINDINGS: Binary aqueous solutions of AGA form birefringent gels consisting of a network of long helical fibrils. 'Infinitely' long negatively charged fibrils are in equilibrium with shorter fibrils (≈25 nm), both of which have a diameter of about 3 nm and are made of around 30 stacks of AGA per helical period (≈9nm), with each stack consisting of two AGA molecules. The interaxial distance (order of magnitude ≈20 nm) varies with an almost two-dimensional swelling law. Addition of ethanol reduces electrostatic repulsion and favors the formation of fibrillar end caps, reducing the average length of shorter fibrils, as well as the formation of small, swollen aggregates. While the gel network built by the long fibrils is resilient to a significant amount of ethanol, all fibrils are finally dissolved into small aggregates above a certain threshold concentration of ethanol (≈30 wt%).
Assuntos
Etanol , Hidrogéis , Hidrogéis/química , Etanol/química , Ácido Glicirrízico , Água/química , Cloreto de SódioRESUMO
The preservation of labile biomolecules presents a major challenge in chemistry, and deep eutectic solvents (DESs) have emerged as suitable environments for this purpose. However, how the hydration of DESs impacts the behavior of proteins is often neglected. Here, we demonstrate that the amino acid environment and secondary structure of two proteins (bovine serum albumin and lysozyme) and an antibody (immunoglobulin G) in 1:2 choline chloride:glycerol and 1:2 choline chloride:urea follow a re-entrant behavior with solvent hydration. A dome-shaped transition is observed with a folded or partially folded structure at very low (<10 wt % H2O) and high (>40 wt % H2O) DES hydration, while protein unfolding increases between those regimes. Hydration also affects protein conformation and stability, as demonstrated for bovine serum albumin in hydrated 1:2 choline chloride:glycerol. In the neat DES, bovine serum albumin remains partially folded and unexpectedly undergoes unfolding and oligomerization at low water content. At intermediate hydration, the protein begins to refold and gradually retrieves the native monomer-dimer equilibrium. However, ca. 36 wt % H2O is required to recover the native folding fully. The half-denaturation temperature of the protein increases with decreasing hydration, but even the dilute DESs significantly enhance the thermal stability of bovine serum albumin. Also, protein unfolding can be reversed by rehydrating the sample to the high hydration regime, also recovering protein function. This correlation provides a new perspective to understanding protein behavior in hydrated DESs, where quantifying the DES hydration becomes imperative to identifying the folding and stability of proteins.
Assuntos
Solventes Eutéticos Profundos , Glicerol , Soroalbumina Bovina/química , Solventes/química , ColinaRESUMO
When in contact with a biological medium, the surfaces of nanoparticles are usually covered by proteins. In this regard, it was found that poly(ethylene glycol) (PEG) promotes the "stealth effect". This implies a reduction of unspecific protein adsorption and cellular uptake. Although information about the PEG-protein interaction was reported, more accurate and sophisticated structure and dynamics analyses are needed to understand the interaction processes in detail. This work studies the PEG-protein interaction using model nanoparticles stabilized either by the PEG-based surfactant Lutensol AT50 or sodium dodecyl sulfate. The interaction with human serum albumin was studied using neutron scattering techniques. The parameters obtained by small-angle neutron scattering yielded information about the adsorbed protein layer thickness. Protein structure changes were detected via differential scanning fluorimetry and elastic neutron scattering. This combination gives a better insight into the PEG-protein interaction, contributing to the design of nanomaterials for medical applications.
Assuntos
Nanopartículas , Polietilenoglicóis , Adsorção , Excipientes , Humanos , Nanopartículas/química , Polietilenoglicóis/química , Proteínas/química , Albumina Sérica Humana , Dodecilsulfato de Sódio/química , Tensoativos/químicaRESUMO
Modern syntheses of colloidal nanocrystals yield extraordinarily narrow size distributions that are believed to result from a rapid "burst of nucleation" (La Mer, JACS, 1950, 72(11), 4847-4854) followed by diffusion limited growth and size distribution focusing (Reiss, J. Chem. Phys., 1951, 19, 482). Using a combination of in situ X-ray scattering, optical absorption, and 13C nuclear magnetic resonance (NMR) spectroscopy, we monitor the kinetics of PbS solute generation, nucleation, and crystal growth from three thiourea precursors whose conversion reactivity spans a 2-fold range. In all three cases, nucleation is found to be slow and continues during >50% of the precipitation. A population balance model based on a size dependent growth law (1/r) fits the data with a single growth rate constant (k G) across all three precursors. However, the magnitude of the k G and the lack of solvent viscosity dependence indicates that the rate limiting step is not diffusion from solution to the nanoparticle surface. Several surface reaction limited mechanisms and a ligand penetration model that fits data our experiments using a single fit parameter are proposed to explain the results.
RESUMO
We report the real-time response of Escherichia coli to lactoferricin-derived antimicrobial peptides (AMPs) on length scales bridging microscopic cell sizes to nanoscopic lipid packing using millisecond time-resolved synchrotron small-angle X-ray scattering. Coupling a multiscale scattering data analysis to biophysical assays for peptide partitioning revealed that the AMPs rapidly permeabilize the cytosolic membrane within less than 3 s-much faster than previously considered. Final intracellular AMP concentrations of â¼80-100 mM suggest an efficient obstruction of physiologically important processes as the primary cause of bacterial killing. On the other hand, damage of the cell envelope and leakage occurred also at sublethal peptide concentrations, thus emerging as a collateral effect of AMP activity that does not kill the bacteria. This implies that the impairment of the membrane barrier is a necessary but not sufficient condition for microbial killing by lactoferricins. The most efficient AMP studied exceeds others in both speed of permeabilizing membranes and lowest intracellular peptide concentration needed to inhibit bacterial growth.
Assuntos
Antibacterianos , Peptídeos Catiônicos Antimicrobianos , Membrana Celular , Escherichia coli , Lactoferrina , Antibacterianos/farmacologia , Peptídeos Catiônicos Antimicrobianos/metabolismo , Peptídeos Catiônicos Antimicrobianos/farmacologia , Bactérias/efeitos dos fármacos , Bactérias/metabolismo , Membrana Celular/efeitos dos fármacos , Membrana Celular/metabolismo , Escherichia coli/efeitos dos fármacos , Escherichia coli/metabolismo , Espaço Intracelular/química , Espaço Intracelular/microbiologia , Lactoferrina/metabolismo , Lactoferrina/farmacologia , Fatores de TempoRESUMO
HYPOTHESIS: In a recent paper, we determined the phase behavior of an aqueous solution of octyl ether octaethylene oxide carboxylic acid ([H+][C8E8c-], Akypo™ LF2) and with partial replacement of H+ by Na+ and Ca2+. It was found that even the neat surfactants are liquid at room temperature and that they form only direct micelles for any aqueous content and over large temperature ranges. The aim of the present work was to find an explanation for the clouding in these systems as well as for the coacervation observed at very low surfactant content. We expected that very similar phase diagrams would be found for a full replacement of H+ by the mentioned ions. EXPERIMENTS: We established the respective phase diagrams of the above-mentioned salts in water and determined the structures of the occurring phases in detail with small-and wide-angle X-ray scattering, small-angle neutron scattering, dynamic light scattering, heat flux differential scanning calorimetry, as well as surface tension, ESI-MS, and NMR experiments. FINDINGS: To our surprise, we discovered a new type of nematic phase between an isotropic and a hexagonal phase. Based on the complete description of all occurring phases both in the acidic and the charged surfactant systems, we were able to design a coherent and unified picture of all these phases, including the auto-coacervation at low surfactant concentration, the non-conventional clouding at high temperatures, the unusual liquid crystalline phases in a small domain at high surfactant concentrations, and the Lß phase at low temperatures and at very low water content. It turned out that all phenomena are a consequence of the subtle interplay between a) the packing constraint due to the very large head-group, b) the relatively small hydrocarbon chain and c) the tunable electrostatic interactions versus entropy.
Assuntos
Micelas , Tensoativos , Ácidos Carboxílicos , Óxido de Etileno , Íons , Tensoativos/química , Água/químicaRESUMO
Surfactants aggregate in water into micelles, and these micelles incorporate organic substances to solubilize them. Hydrotropes are compounds that increase the solubility of hydrophobic substances in water without this form of aggregation. Decreasing the chain length of the classical surfactant Aerosol OT (AOT) from C8 to C5 results in a molecule with intermediate properties. Molecular dynamics simulations and surface tension measurements are performed on this short chain derivative of AOT. This compound shows high solubility and at the same time progressive weak aggregation. The hydration of head groups hinders significant plunging into a hydrophobic core, which leads to well defined liquid chain nanodomains. The transition to bicontinuous aggregates is in the concentration range of 1 mol L-1. The sulfonate group of the head groups (placed at the water interface of worm-like aggregates) rather than the aggregate-aggregate interaction is responsible for the unusual small angle X-ray scattering pattern.