Riboflavin modified carbon cloth enhances anaerobic digestion treating food waste in a pilot-scale system.

Previous laboratory-scale studies have consistently shown that carbon-based conductive materials can notably improve the anaerobic digestion of food waste, typically employing reactors with regular capacity of 1-20 L. Furthermore, incorporating riboflavin-loaded conductive materials can further address the imbalance between fermentation and methanogenesis in anaerobic systems. However, there have been few reports on pilot-scale investigation. In this study, a 10 m2 of riboflavin modified carbon cloth was incorporated into a pilot-scale (2 m3) food waste anaerobic reactor to improve its treatment efficiency. The study found that the addition of riboflavin-loaded carbon cloth can increase the maximum organic loading rate (OLR) by 40% of the pilot-scale reactor, compared to the system using carbon cloth without riboflavin loading, while ensuring efficient operation of the reaction system, effectively alleviating system acidification, sustaining methanogen activity, and increasing daily methane production by 25%. Analysis of the microbial community structure revealed that riboflavin-loaded carbon cloth enriched the methanogenic archaea in the genera of Methanothrix and Methanobacterium, which are capable of extracellular direct interspecies electron transfer (DIET). And metabolic pathway analysis identified the methane production pathway, highly enriched on the reduction of acetic acid and CO2 at riboflavin-loaded carbon cloth sample. The expression levels of genes related to methane production via DIET pathway were also significantly upregulated. These results can provide important guidance for the practical application of food waste anaerobic digestion engineering.

Genome sequence of Fusarium oxysporum strain ByF01, the causal agent of root rot of Knoxia roxburghii in China.

OBJECTIVES: Knoxia roxburghii is a member of the madder (Rubiaceae) family. This plant is cultivated in different areas of China and recognized for its medicinal properties, which leads to its use in traditional Chinese medicine. The incidence of root rot was 10-15%. In June 2023, the causal agent of root rot on K. roxburghii was identified as Fusarium oxysporum. To the best of our knowledge, this is the first report of the complete genome of F. oxysporum strain ByF01 that is the causal agent of root rot of K. roxburghii in China. The results will provide effective resources for pathogenesis on K. roxburghii and the prevention and control of root rot on this host in the future. DATA DESCRIPTION: To understand the molecular mechanisms used by F. oxysporum to cause root rot on K. roxburghii, strain ByF01 was isolated from diseased roots and identified by morphological and molecular methods. The complete genome of strain ByF01 was then sequenced using a combination of the PacBio Sequel IIe and Illumina sequencing platforms. We obtained 54,431,725 bp of nucleotides, 47.46% GC content, and 16,705 coding sequences.

Heterogeneous g-C3N4/polyaniline composites enhanced the conversion of organics into methane during anaerobic wastewater treatment.

In this study, g-C3N4/PANI was prepared by in situ oxidative polymerization. Graphite-phase carbon nitride (g-C3N4) with surface defects was deposited onto the surface of conductive polyaniline (PANI) to form a p-n heterojunction. This construction aimed to create an efficient heterogeneous catalyst, increasing the surface defect level and active sites of the composite, and augmenting its capability to capture and transfer extracellular electrons under anaerobic conditions. This addresses the challenge of low efficiency in direct interspecies electron transfer between bacteria and archaea during anaerobic digestion for methane production. The results showed that the prepared g-C3N4/PANI increased the CH4 yield and CH4 production rate by 82% and 96%, respectively. Notably, the conductivity and XPS test results showed that the ratio of g-C3N4 to PANI was 0.15, and the composite exhibited favorable conductivity, with a uniform distribution of pyrrolic nitrogen, pyridinic nitrogen, and graphitic nitrogen, each accounting for approximately 30%. Furthermore, g-C3N4/PANI effectively enhanced the metabolic efficiency of intermediate products such as acetate and butyrate. Analysis of the microbial community structure revealed that g-C3N4/PANI led to a significant increase in the abundance of hydrogenotrophic methanogen Methanolinea (from 48% to 64%) and enriched Clostridium (a rise of 1%) with direct interspecies electron transfer capability. Microbial community function analysis demonstrated that the addition of g-C3N4/PANI boosted the activities of key enzymes involved in anaerobic digestion, including phosphate transacetylase (PTA), phospho-butyryl transferase (PTB), and NAD-independent lactate dehydrogenase (NNLD), by 47%, 135%, and 153%, respectively. This acceleration in enzymatic activity promoted the metabolism of acetyl-CoA, butyryl-CoA, and pyruvate. Additionally, the function of ABC transporters was enhanced, thereby improving the efficiency of material and energy exchange among microorganisms.

Assessing the biodiversity of rhizosphere and endophytic fungi in Knoxia valerianoides under continuous cropping conditions.

BACKGROUND: Rhizosphere and endophytic fungi play important roles in plant health and crop productivity. However, their community dynamics during the continuous cropping of Knoxia valerianoides have rarely been reported. K. valerianoides is a perennial herb of the family Rubiaceae and has been used in herbal medicines for ages. Here, we used high-throughput sequencing technology Illumina MiSeq to study the structural and functional dynamics of the rhizosphere and endophytic fungi of K. valerianoides. RESULTS: The findings indicate that continuous planting has led to an increase in the richness and diversity of rhizosphere fungi, while concomitantly resulting in a decrease in the richness and diversity of root fungi. The diversity of endophytic fungal communities in roots was lower than that of the rhizosphere fungi. Ascomycota and Basidiomycota were the dominant phyla detected during the continuous cropping of K. valerianoides. In addition, we found that root rot directly affected the structure and diversity of fungal communities in the rhizosphere and the roots of K. valerianoides. Consequently, both the rhizosphere and endophyte fungal communities of root rot-infected plants showed higher richness than the healthy plants. The relative abundance of Fusarium in two and three years old root rot-infected plants was significantly higher than the control, indicating that continuous planting negatively affected the health of K. valerianoides plants. Decision Curve Analysis showed that soil pH, organic matter (OM), available K, total K, soil sucrase (S_SC), soil catalase (S_CAT), and soil cellulase (S_CL) were significantly related (p < 0.05) to the fungal community dynamics. CONCLUSIONS: The diversity of fungal species in the rhizosphere and root of K. valerianoides was reported for the first time. The fungal diversity of rhizosphere soil was higher than that of root endophytic fungi. The fungal diversity of root rot plants was higher than that of healthy plants. Soil pH, OM, available K, total K, S_CAT, S_SC, and S_CL were significantly related to the fungal diversity. The occurrence of root rot had an effect on the community structure and diversity of rhizosphere and root endophytic fungi.

Simple and sensitive electrochemical sensing of amethopterin by using carbon nanobowl/cyclodextrin electrode.

Resulted from the severe side effects, the development of inexpensive, simple and sensitive method for amethopterin (ATP, an antineoplastic drug) is very important but it still remains a challenge. In this work, low cost nanohybrid composed of carbon nanobowl (CNB) and ß-cyclodextrins (ß-CD) (CNB-CD) was prepared with a simple autopolymerization way and applied as electrode material to develop a novel electrochemical sensor of ATP. Scanning-/transmission-electron microscopy, Fourier transform infrared spectrum, photographic image and electrochemical technologies were utilized to characterize morphologies and structure of the as-prepared CNB and CNB-CD materials. On the basic of the coordination advantages from CNB (prominent electrical property and surface area) and ß-CD (superior molecule-recognition and solubility capabilities), the CNB-CD nanohybrid modified electrode exhibits superior sensing performances toward ATP, and a low detection limit of 0.002 µM coupled with larger linearity of 0.005-12.0 µM are obtained. In addition, the as-prepared sensor offers desirable repeatability, stability, selectivity and practical application property, confirming that this proposal may have important applications in the determination of ATP.

Encapsulation of Lactobacillus plantarum in W1/O/W2 double emulsions stabilized with the high-intensity ultrasound-treated pea protein and pectin.

This study focuses on developing a water-in-oil-in-water (W1/O/W2) double emulsion system using high-intensity ultrasound (HIU)-treated pea protein isolate (HIU-PPI) and pectin to encapsulate Lactobacillus plantarum (L. plantarum). The effects of ultrasound treatment on pea protein isolate (PPI) characteristics such as solubility, particle size, emulsification, surface hydrophobicity, and surface free sulfhydryl group were examined, determining optimal HIU processing conditions was 400 W for 10 min. The developed W1/O/W2 double emulsion system based on HIU-PPI demonstrated effective encapsulation and protection of L. plantarum, especially at the HIU-PPI concentration of 4 %, achieving an encapsulation efficiency of 52.65 %. Incorporating both HIU-PPI and pectin as emulsifiers increased the particle size and significantly enhanced the emulsion's viscosity. The highest bacterial encapsulation efficiency of the emulsion, 59.94 %, was attained at a HIU to pectin concentration ratio of 3:1. These emulsions effectively encapsulate and protect L. plantarum, with the concentration of HIU-PPI being a critical factor in enhancing probiotic survival under simulated gastrointestinal digestion. However, the concurrent utilization of pectin and HIU-PPI as emulsifiers did not provide a notable advantage compared to the exclusive use of HIU-PPI in enhancing probiotic viability during in vitro simulated digestion. This research offers valuable perspectives for the food industry on harnessing environmentally friendly, plant-based proteins as emulsifiers in probiotic delivery systems. It underscores the potential of HIU-modified pea protein and pectin in developing functional food products that promote the health benefits of probiotics.

The prevalence and genotype distribution of high-risk human papillomaviruses among women in Xianning, China.

BACKGROUND: The persistent infection of high-risk Human papillomavirus(HPV) is considered the main cause of cervical intraepithelial neoplasia and cervical cancer. But various cervical lesions caused by HPV infection can be properly prevented by timely vaccination. However, the distribution of HPV genotypes varies geographically. METHODS: Retrospective analysis of high-risk HPV prevalence of 16,150 women from 2020 to 2022 in xianning of China. HPV genotyping was performed using a PCR-RDB Kit that can detect 18 high-risk HPV genotypes recommended by China's National Medical Products Administration. The prevalence of 18 high-risk HPV genotypes and their relationship with cervical lesions as well as vaccine efficacy were analyzed. RESULTS: A total of 2431 women were confirmed to have different types of high-risk HPV infections. The overall positive rate reached 15.05%(2431/16,150). The most prevalent high-risk HPV genotypes were HPV52, 16, 58, 53, and 51. The prevalence of high-risk HPV reached peak at age ≤ 20(20.95%) and age ≥ 61(20.56%). The most prevalent high-risk HPV genotypes were HPV16, 58, 18, 33 and 52 in cervical cancer cases, HPV16, 52, 58, 33 and 18 in CIN2/3 cases, and HPV52, 58, 16, 53 and 18 in CIN1 cases, respectively. CONCLUSION: HPV16, 58 and 18 are the most dangerous and carcinogenic genotypes in xianning, China. Conducting epidemiological investigations on high-risk HPV has significant clinical value in guiding HPV vaccination work.

Three-Dimensional-Printed Template-Guided Radioactive Seed Brachytherapy via a Submental Approach for Recurrent Base of Tongue and Floor of Mouth Cancer.

Background: This study assessed clinical outcomes of three-dimensional-printed template (3DPT)-guided radioactive seed brachytherapy (RSBT) via a submental approach for recurrent base of tongue and floor of mouth cancer. Methods: Thirty-one patients with recurrent lingual and floor of mouth squamous cell carcinoma after surgery and radiotherapy were treated with 3DPT-guided RSBT from 2015 to 2022. Seeds were implanted through a submental approach guided by 3DPTs. Local control (LC), overall survival (OS), disease control (DC) and quality of life (QOL) were evaluated. Results: The median follow-up was 13.7 months. The 1-, 3- and 5-year LC rates were 66.1%, 66.1%, and 55.1% respectively. The 1-, 3- and 5-year OS rates were 63.4%, 33.4%, and 8.3%. The 1-, 3- and 5-year DC rates were 37.8%, 26.5%, and 21.2%. Univariate analysis showed tumor size significantly affected LC (P = 0.031). The presence of extraterritorial lesions affected DC and OS on multivariate analysis (P < 0.01). QOL improved significantly in domains of pain, swallowing, chewing, taste, and emotion after treatment compared to baseline. Four patients (13%) developed necrosis and osteoradionecrosis. Conclusions: 3DPT-guided submental RSBT provided favorable LC and QOL for recurrent tongue/floor of mouth cancer with minimal toxicity; moreover, severe toxicity should be noted.

Experimental validation of the accuracy of robotic-assisted radioactive seed implantation for tumor treatment.

An experimental validation of a robotic system for radioactive iodine-125 seed implantation (RISI) in tumor treatment was conducted using customized phantom models and animal models simulating liver and lung lesions. The robotic system, consisting of planning, navigation, and implantation modules, was employed to implant dummy radioactive seeds into the models. Fiducial markers were used for target localization. In phantom experiments across 40 cases, the mean errors between planned and actual seed positions were 0.98 ± 1.05 mm, 1.14 ± 0.62 mm, and 0.90 ± 1.05 mm in the x, y, and z directions, respectively. The x, y, and z directions correspond to the left-right, anterior-posterior, and superior-inferior anatomical planes. Silicone phantoms exhibiting significantly smaller x-axis errors compared to liver and lung phantoms (p < 0.05). Template assistance significantly reduced errors in all axes (p < 0.05). No significant dosimetric deviations were observed in parameters such as D90, V100, and V150 between plans and post-implant doses (p > 0.05). In animal experiments across 23 liver and lung cases, the mean implantation errors were 1.28 ± 0.77 mm, 1.66 ± 0.69 mm, and 1.86 ± 0.93 mm in the x, y, and z directions, slightly higher than in phantoms (p < 0.05), with no significant differences between liver and lung models. The dosimetric results closely matched planned values, confirming the accuracy of the robotic system for RISI, offering new possibilities in clinical tumor treatment.

Detection of fucosylated extracellular vesicles miR-4732-5p related to diagnosis of early lung adenocarcinoma by the electrochemical biosensor.

Our preliminary investigation has identified the potential of serum fucosylated extracellular vesicles (EVs) miR-4732-5p in the early diagnosis of lung adenocarcinoma (LUAD) by a fucose-captured strategy utilizing lentil lectin (LCA)-magnetic beads and subsequent screening of high throughput sequencing and validation of real-time quantitative polymerase chain reaction (RT-qPCR). Considering the relatively complicated procedure, expensive equipment, and stringent laboratory condition, we have constructed an electrochemical biosensor assay for the detection of miR-4732-5p. miR-4732-5p is extremely low in serum, down to the fM level, so it needs to be detected by highly sensitive electrochemical methods based on the Mg2+-dependent DNAzyme splitting nucleic acid lock (NAL) cycle and hybridization chain reaction (HCR) signal amplification. In this study, signal amplification is achieved through the dual amplification reactions using NAL cycle in combination with HCR. In addition, hybridized DNA strands bind to a large number of methylene blue (MB) molecules to enhance signaling. Based on the above strategy, we further enhance our signal amplification strategies to improve detection sensitivity and accuracy. The implementation of this assay proceeded as follows: initially, miR-4732-5p was combined with NAL, and then Mg2+-dependent DNAzyme splitted NAL to release auxiliary DNA (S1) strands, which were subsequently captured by the immobilized capture probe DNA (C1) strands on the electrode surface. Following this, abundant quantities of DNA1 (H1) and DNA2 (H2) tandems were generated by HCR, and S1 strands then hybridized with the H1 and H2 tandems through base complementary pairing. Finally, MB was bonded to the H1 and H2 tandems through π-π stacking interaction, leading to the generation of a signal current upon the detection of a potential capable of inducing a redox change of MB by the electrode. Furthermore, we evaluated the performance of our developed electrochemical biosensor assay. The results demonstrated that our assay is a reliable approach, characterized by its high sensitivity (with a detection limit of 2.6 × 10-17 M), excellent specificity, good accuracy, reproducibility, and stability. Additionally, it is cost-effective, requires simple operation, and is portable, making it suitable for the detection of serum fucosylated extracellular vesicles miR-4732-5p. Ultimately, this development has the potential to enhance the diagnostic efficiency for patients with early-stage LUAD.

Recovery of organic matters by activated sludge from municipal wastewater: Performance and characterization.

Municipal wastewater treatment processes consume a significant amount of energy and generate substantial carbon emissions. However, organic matters existing in municipal wastewater hold the potential as a valuable carbon source. Activated sludge has the potential to capture and recover the organic matters, thereby enriching carbon sources and facilitating subsequent sludge anaerobic digestion as well as in line with the concept of sustainable development. Based on above, this study investigated the enrichment and recovery characteristics and mechanisms of activated sludge adsorption on carbon sources in municipal wastewater, while optimizing the recovery conditions. The results indicated that insoluble organic matters, as well as a fraction of dissolved organic matters, can be effective recovered within approximately 40 min. Specifically, 74.1% of insoluble organic matters and 25.8% of soluble organic matters were successfully captured by the activated sludge, resulting in a 5.0% increase in sludge organic matter content. Moreover, activated sludge demonstrated remarkable recovery of particulate organic matters across various particle sizes, particularly larger particles (>5 µm) with high protein content. Notably, the dissolved biodegradable organics such as tryptophan and tyrosine protein-like substances according to 3D-EEM and lipids, proteins/amino sugars, and carbohydrates according to FT-ICR MS can be effectively recovered. Finally, the study revealed that the recovery of organic matters from the wastewater by activated sludge followed the pseudo-second-order kinetics model, with surface binding, hydrogen bonding and interparticle diffusion in sludge flocs as the primary adsorption mechanisms. This approach had abroad application prospects for improving the profitability of wastewater treatment plants.

Endoscopic lithotripsy combined with drug lithotripsy vs. drug lithotripsy for the treatment of phytobezoars: analysis of 165 cases.

AIM: To analyze efficacy of endoscopic lithotripsy combined with drug lithotripsy as compared with drug lithotripsy for the treatment of phytobezoars. METHODS: We collected and evaluated case records of 165 patients with phytobezoars from 2014 to 2023. And we analyzed demographic and clinical characteristics, imaging features, endoscopic features, complications of phytobezoars, and compared efficacy between endoscopic lithotripsy combined with drug lithotripsy (Group A) and drug lithotripsy (sodium bicarbonate combined with proton pump inhibitor) (Group B). RESULTS: The median age of patients with phytobezoars was 67.84 ± 4.286 years old. Abdominal pain was the most common symptom and peptic ulcers (67.5%) were the most common complication. Bezoar-induced ulcers were more frequent in the gastric angle. The success rate of phytobezoars vanishing in Group A and Group B were similar (92.3% vs. 85.1% within 48 h, 98.7% vs. 97.7% within a week), while the average hospitalization period, average hospitalization cost, second endoscopy rate, and average endoscopic operation time were significantly lower in patients in Group B than in Group A. CONCLUSION: Drug lithotripsy is the preferred effective and safe treatment option for phytobezoars. We advise that an endoscopy should be completed after 48 h for drug lithotripsy.

The complete plastome genome sequence of Cynanchum otophyllum (Asclepiadaceae), a unique medicinal species in China.

Cynanchum otophyllum Schneid is an important medicinal plant in China. In this paper, the chloroplast genome of C. otophyllum was sequenced based on high-throughput technology, and the chloroplast genome structure characteristics and phylogenetic relationship of C. otophyllum were analyzed. The results showed the complete plastome genome size of C. otophyllumis 160,874bp, including one small single copy (SSC, 19,851bp) and one large single copy (LSC, 92,009bp) regions isolated by a pair of inverted repeat regions (IRs, 24,507bp). The whole plastome genome including 84 protein encoding genes, 8 rRNA and 37 tRNA. Based on the phylogenetic topologies, C. otophyllum shows close association with additional Gomphocarpus and Asclepias genus. This study contributes to an enhanced understanding of the genetic information of C. otophyllum and provides a theoretical basis for the development of molecular markers and phylogeographic of the species, as well as for constructing the phylogenetic tree of Asclepiadaceae.

Photoelectrochemical Sensor for H2S Based on a Lead-Free Perovskite/Metal-Organic Framework Composite.

Halide perovskites have emerged as a highly promising class of photoelectric materials. However, the application of lead-based perovskites has been hindered by their toxicity and relatively weak stability. In this work, a composite material comprising a lead-free perovskite cesium copper iodide (CsCu2I3) nanocrystal and a metal-organic framework (MOF-801) has been synthesized through an in situ growth approach. The resulting composite material, denoted as CsCu2I3/MOF-801, demonstrates outstanding stability and exceptional optoelectronic characteristics. MOF-801 may serve a dual role by acting as a protective barrier between CsCu2I3 nanocrystals and the external environment, as well as promoting the efficient transfer of photogenerated charge carriers, thereby mitigating their recombination. Consequently, CsCu2I3/MOF-801 demonstrates its utility by providing both stability and a notably high initial photocurrent. Leveraging the inherent reactivity between H2S and the composite material, which results in the formation of Cu2S and structural alteration, an exceptionally sensitive photoelectrochemical sensor for H2S detection has been designed. This sensor exhibits a linear detection range spanning from 0.005 to 100 µM with a remarkable detection limit of 1.67 nM, rendering it highly suitable for precise quantification of H2S in rat brains. This eco-friendly sensor significantly broadens the application horizon of perovskite materials and lays a robust foundation for their future commercialization.

Review: The application of source analysis methods in tracing urban non-point source pollution: categorization, hotspots, and future prospects.

The contribution of urban non-point source (NPS) pollution to surface water pollution has gradually increased, analyzing the sources of urban NPS pollution is of great significance for precisely controlling surface water pollution. A bibliometric analysis of relevant research literature from 2000 to 2021 reveals that the main methods used in the source analysis research of urban NPS pollution include the emission inventory approach, entry-exit mass balance approach, principal component analysis (PCA), positive matrix factorization (PMF) model, etc. These methods are primarily applied in three aspects: source analysis of rainfall-runoff pollution, source analysis of wet weather flow (WWF) pollution in combined sewers, and analysis of the contribution of urban NPS to the surface water pollution load. The application of source analysis methods in urban NPS pollution research has demonstrated an evolution from qualitative to quantitative, and further towards precise quantification. This progression has transitioned from predominantly relying on on-site monitoring to incorporating model simulations and employing mathematical statistical analyses for traceability. This paper reviews the principles, advantages, disadvantages, and the scope of application of these methods. It also aims to address existing problems and analyze potential future development directions, providing valuable references for subsequent related research.

Charge Density-Regulated Microchannel-Based Electrochemiluminescence Sensor for Hydrogen Sulfide Detection with a Highly Efficient Accumulation Strategy.

The electrochemiluminescence (ECL) intensity can be regulated by ionic current passing through the microchannel, which broadened the regulation of the ECL sensors. But in the early reported sensors, the electrostatic repulsion and steric hindrance caused few targets to approach the interface of the microchannel driven by concentration difference, which reduced the detection efficiency and prolonged the detection period. In this study, different accumulation strategies, such as a positive electric field and different polarity electric fields, were designed to accumulate targets in the microchannel. The interaction of azide groups and hydrogen sulfide served as a research model. Hydrogen sulfide can react with the negatively charged azide groups in the microchannel surface to produce positively charged amino groups, decreasing the negative charge density of the microchannel and thus altering the ionic current and ECL intensity. The accumulation of hydrogen sulfide at the microchannel tip can increase the collision probability with azide groups to improve the detection efficiency, and the integration of accumulation and reaction can shorten the detection period to 28 min. The hydrogen sulfide concentration on the microchannel tip accumulated by applying different polarity electric fields was 22.3-fold higher than that accumulated by applying a positive electric field. The selected research model broadened the application range of a microchannel-based ECL sensor and confirmed the universality of the microchannel-based ECL sensor.

The presence of micropapillary and/or solid subtypes is an independent prognostic factor for patients undergoing curative resection for stage I lung adenocarcinoma with ground-glass opacity.

Background: Non-predominant or even minimal micropapillary and/or solid (MP/S) subtypes have been reported to exert an unfavorable prognostic influence on surgically resected lung adenocarcinoma (ADC). Currently, there is a lack of evidence to demonstrate that high-grade pathological subtypes, including MP/S components, impact the prognosis of patients with surgically resected lung ADCs with ground-glass opacity (GGO). In this investigation, we explored the prognostic implications of minimal MP/S components in lung ADCs with GGO. Methods: A retrospective cohort study was conducted on 1,004 consecutive patients undergoing curative resection for pathologic stage (p-stage) I lung ADCs featuring GGO on computed tomography (CT) scans between January 2014 and December 2016. Tumors were categorized into MP/S positive (MP/S+) group and MP/S negative (MP/S-) group. MP/S+ tumors were defined when MP/S subtypes constituted ≥1% of the entire tumor. The prognostic impact of MP/S subtypes was evaluated using Kaplan-Meier analysis, Cox proportional hazard model and restricted cubic spine (RCS) model. Results: A total of 86 (8.6%) cases with MP/S+ tumors and 918 (91.4%) cases with MP/S- tumors were identified. The solid component tumor diameter and pathological invasive tumor size of MP/S+ tumors were both significantly larger than that of MP/S- tumors (13.0 vs. 4.0 mm, P<0.001, and 18.0 vs. 10.0 mm, P<0.001, respectively). After a median follow-up of 7.3 years, the presence of MP/S components was significantly associated with decreased RFS (5-year RFS, MP/S+ 88.3% vs. MP/S- 97.4%; P<0.001; HR =1.02). The presence of a histologic lepidic (Lep) component demonstrated a prognostic advantage in both MP/S- (5-year RFS, MP/S-Lep+ 98.0% vs. MP/S-Lep- 95.3%; P=0.01; HR =0.89) and MP/S+ subgroups (5-year RFS, MP/S+Lep+ 93.4% vs. MP/S+Lep- 83.2%; P=0.10; HR =0.84). MP/S+ components ≥5% were the only tumor-related factor that independently affected RFS [hazard ratio (HR) =1.77; 95% confidence interval (CI): 1.07-2.94] according to multivariate analysis. There was a progressively negative impact of the proportion of MP/S subtypes on RFS as illustrated by RCS model. Conclusions: The presence of MP/S patterns in stage I GGO-featured lung ADCs exhibit significant prognostic value and may have implications for tailored postoperative treatment and surveillance strategies, especially when the proportion exceeds 5% of the entire tumor.

Experimental Investigation of Reflectarray Antennas for High-Power Microwave Applications.

The power capacity of reflectarray antennas (RAs) is investigated through full-wave simulations and high-power microwave (HPM) experiments in this paper. In order to illustrate the results in detail, two RA elements are designed. The simulated power handling capacity of two RA elements are 7.17 MW/m2 and 2.3 GW/m2, respectively. To further study the HPM RA, two RA prototypes operating at 2.8 GHz are constructed with the aperture size of 1 m × 1 m. Simulations and experimental measurements are conducted for the two prototypes. The experimental results demonstrate that, even when subjected to 1 GW of power, the radiation beam of the RA with the second elements can still propagate in the intended direction. This research will establish a basis for advancing the practicality of RAs in HPM applications.

3D Aligned Nanofiber Scaffold Fabrication with Trench-Guided Electrospinning for Cardiac Tissue Engineering.

Constructing three-dimensional (3D) aligned nanofiber scaffolds is significant for the development of cardiac tissue engineering, which is promising in the field of drug discovery and disease mechanism study. However, the current nanofiber scaffold preparation strategy, which mainly includes manual assembly and hybrid 3D printing, faces the challenge of integrated fabrication of morphology-controllable nanofibers due to its cross-scale structural feature. In this research, a trench-guided electrospinning (ES) strategy was proposed to directly fabricate 3D aligned nanofiber scaffolds with alternative ES and a direct ink writing (DIW) process. The electric field effect of DIW poly(dimethylsiloxane) (PDMS) side walls on guiding whipping ES nanofibers was investigated to construct trench design rules. It was found that the width/height ratio of trenches greatly affected the nanofiber alignment, and the trench width/height ratio of 1.5 provided the nanofiber alignment degree over 60%. As a proof of principle, 3D nanofiber scaffolds with controllable porosity (60-80%) and alignment (30-60%) were fabricated. The effect of the scaffolds was verified by culturing human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs), which resulted in the uniform 3D distribution of aligned hiPSC-CMs with ∼1000 µm thickness. Therefore, this printing strategy shows great potential for the efficient engineered tissue construction.

Corrigendum: Biosynthesis, characterization, and antifungal activity of plant-mediated silver nanoparticles using Cnidium monnieri fruit extract.

[This corrects the article DOI: 10.3389/fmicb.2023.1291030.].