Surface Engineering Enhances Vanadium Carbide MXene-Based Nanoplatform Triggered by NIR-II for Cancer Theranostics.

Despite the advantages of high tissue penetration depth, selectivity, and non-invasiveness of photothermal therapy for cancer treatment, developing NIR-II photothermal agents with desirable photothermal performance and advanced theranostics ability remains a key challenge. Herein, a universal surface modification strategy is proposed to effectively improve the photothermal performance of vanadium carbide MXene nanosheets (L-V2C) with the removal of surface impurity ions and generation of mesopores. Subsequently, MnOx coating capable of T1-weighted magnetic resonance imaging can be in situ formed through surface redox reaction on L-V2C, and then, stable nanoplatforms (LVM-PEG) under physiological conditions can be obtained after further PEGylation. In the tumor microenvironment irradiated by NIR-II laser, multivalent Mn ions released from LVM-PEG, as a reversible electronic station, can consume the overexpression of glutathione and catalyze a Fenton-like reaction to produce ·OH, resulting in synchronous cellular oxidative damage. Efficient synergistic therapy promotes immunogenic cell death, improving tumor-related immune microenvironment and immunomodulation, and thus, LVM-PEG can demonstrate high accuracy and excellent anticancer efficiency guided by multimodal imaging. As a result, this study provides a new approach for the customization of 2D surface strategies and the study of synergistic therapy mechanisms, highlighting the application of MXene-based materials in the biomedical field.

Enhanced drug resistance suppression by serum-stable micelles from multi-arm amphiphilic block copolymers and tocopheryl polyethylene glycol 1000 succinate.

Aim: To develop a robust drug-delivery system using multi-arm amphiphilic block copolymers for enhanced efficacy in cancer therapy. Materials & methods: Two series of amphiphilic polymer micelles, PEG-b-PCLm and PEG-b-PCLm/TPGS, were synthesized. Doxorubicin (DOX) loading into the micelles was achieved via solvent dialysis. Results: The micelles displayed excellent biocompatibility, narrow size distribution, and uniform morphology. DOX-loaded micelles exhibited enhanced antitumor efficacy and increased drug accumulation at tumor sites compared with free DOX. Additionally, 4A-PEG47-b-PCL21/TPGS micelles effectively suppressed drug-resistant MCF-7/ADR cells. Conclusion: This study introduces a novel micelle formulation with exceptional serum stability and efficacy against drug resistance, promising for cancer therapy. It highlights innovative strategies for refining clinical translation and ensuring sustained efficacy and safety in vivo.

[Box: see text].

A Soldering Flux Tackles Complex Defects Chemistry in Sn-Pb Perovskite Solar Cells.

Developing tin-lead (Sn-Pb) narrow-bandgap perovskites is crucial for the deployment of all-perovskite tandem solar cells, which can help to exceed the limits of single-junction photovoltaics. However, the Sn-Pb perovskite suffers from a large number of bulk traps and interfacial nonradiative recombination centers, with unsatisfactory open-circuit voltage and the consequent device efficiency. Herein, for the first time, it is shown that abietic acid (AA), a commonly used flux for metal soldering, effectively tackles complex defects chemistry in Sn-Pb perovskites. The conjugated double bond within AA molecule plays a key role for self-elimination of Sn4+-Pb0 defects pair, via a redox process. In addition, C═O group is able to coordinate with Sn2+, leading to the improved antioxidative stability of Sn-Pb perovskites. Consequently, a ten-times longer carrier lifetime is observed, and the defects-associated dual-peak emission feature at low temperature is significantly inhibited. The resultant device achieves a power conversion efficiency improvement from 22.28% (Ref) to 23.42% with respectable stability under operational and illumination situations.

Promoting Intratumoral Drug Accumulation by Bio-Membrane Regulated Active Targeting for Tumor Photothermal Therapy.

Introduction: Insufficient tumor permeability and inadequate nanoparticle retention continue to be significant limitations in the efficacy of anti-tumor drug therapy. Numerous studies have focused on enhancing tumor perfusion by improvement of tumor-induced endothelial leakage, often known as the enhanced permeability and retention (EPR) effect. However, these approaches have produced suboptimal therapeutic outcomes and have been associated with significant side effects. Therefore, in this study, we prepared tumor cell membrane-coated gold nanorods (GNR@TM) to enhance drug delivery in tumors through homogeneous targeting of tumor cell membranes and in situ real-time photo-controlled therapy. Methods: Here, we fabricated GNR@TM, and characterized it using various techniques including Ultraviolet-Visible (UV-Vis) spectrophotometer, particle size analysis, potential measurement, and transmission electron microscopy (TEM). The cellular uptake and cytotoxicity of GNR@TM were analyzed by flow cytometry, confocal laser scanning microscopy (CLSM), TEM, CCK8 assay and live/dead staining. Tissue drug distribution was determined by inductively coupled plasma mass spectrometry (ICP-MS) and immunofluorescence staining. Furthermore, to evaluate the therapeutic effect, mice bearing MB49 tumors were intravenously administered with GNR@TM. Subsequently, near-infrared (NIR) laser therapy was performed, and the mice's tumor growth and body weight were monitored. Results: The tumor cell membrane coating endowed GNR@TM with extended circulation time in vivo and homotypic targeting to tumor, thereby enhancing the accumulation of GNR@TM within tumors. Upon 780 nm laser, GNR@TM exhibited excellent photothermal conversion capability, leading to increased tumor vascular leakage. This magnification of the EPR effect induced by NIR laser further increased the accumulation of GNR@TM at the tumor site, demonstrating strong antitumor effects in vivo. Conclusion: In this study, we successfully developed a NIR-triggered nanomedicine that increased drug accumulation in tumor through photo-controlled therapy and homotypic targeting of the tumor cell membrane. GNR@TM has been demonstrated effective suppression of tumor growth, excellent biocompatibility, and significant potential for clinical applications.

Effects of polymer terminal group inside micelle core on paclitaxel loading promoting and burst release suppressing.

Background: Paclitaxel (PTX) is widely used in the treatment of advanced esophageal and gastric cancer. Polymeric micelles can improve the drug-loading efficiency of PTX. However, the end groups on the amphiphilic blocks affect the drug-loading efficiency and the release kinetics of polymeric micelles. Therefore, there is an urgent need to disclose the tailoring of the core-/shell-forming terminal groups. Methods: Different from the conventional block copolymer synthesis in the reversible addition-fragmentation chain-transfer polymerization, which has a hydrophilic end group on the core-forming blocks, an alternative monomer addition method was applied to tune and obtain two block copolymers with symmetrical and similar block length PBMAn-b-PNAMm [PNAM, poly(N-acryloylmorpholine); PBMA, poly(n-butyl methacrylate)] but distinct end groups on the hydrophobic core-forming blocks, that is, HOOC-PBMA-PNAM-Phen and HOOC-PNAM-PBMA-Phen. The chemical structure of the resulting copolymers was elucidated by proton nuclear magnetic resonance spectroscopy and differential scanning calorimetry. The spherical morphology revealed by transmission electron microscopy and the uniform particle size revealed by dynamic light scattering analysis clearly confirmed the successful preparation of a PTX-polymeric micelle complex. Results: The particle sizes of HOOC-PBMA-PNAM-Phen and HOOC-PNAM-PBMA-Phen were about 40 and 235 nm respectively. The PTX loading efficiency of HOOC-PBMA-PNAM-Phen was much lower than that of HOOC-PNAM-PBMA-Phen. The PTX release from HOOC-PBMA-PNAM-Phen was much slower than that of HOOC-PNAM-PBMA-Phen. The polymers had glass transition temperature (Tg) values of 70.24 and 74.22 ℃, which was from the HOOC-PBMA-PNAM-Phen and HOOC-PNAM-PBMA-Phen micelles, respectively. The systematic study on the PTX loading and releasing profile disclosed that, compared with the HOOC-PBMA-PNAM-Phen, the micelles with Phen group on the hydrophobic block (HOOC-PNAM-PBMA-Phen) enhanced drug loading and prolonged drug release but with a larger particle size. Conclusions: The results indicated that the hydrophobic end group Phen on the core-forming blocks can promote hydrophobic drug loading and suppress burst release.

Strain Modulation for Light-Stable n-i-p Perovskite/Silicon Tandem Solar Cells.

Perovskite/silicon tandem solar cells are promising to penetrate photovoltaic market. However, the wide-bandgap perovskite absorbers used in top-cell often suffer severe phase segregation under illumination, which restricts the operation lifetime of tandem solar cells. Here, a strain modulation strategy to fabricate light-stable perovskite/silicon tandem solar cells is reported. By employing adenosine triphosphate, the residual tensile strain in the wide-bandgap perovskite absorber is successfully converted to compressive strain, which mitigates light-induced ion migration and phase segregation. Based on the wide-bandgap perovskite with compressive strain, single-junction solar cells with the n-i-p layout yield a power conversion efficiency (PCE) of 20.53% with the smallest voltage deficits of 440 mV. These cells also maintain 83.60% of initial PCE after 2500 h operation at the maximum power point. Finally, these top cells are integrated with silicon bottom cells in a monolithic tandem device, which achieves a PCE of 26.95% and improved light stability at open-circuit.

Temperature-Insensitive Efficient Inorganic Perovskite Photovoltaics by Bulk Heterojunctions.

Inorganic perovskite solar cells (IPSCs) emerge as an ideal candidate for applications beyond terrestrial implementation due to their robustness. However, underlying mechanisms regarding their photovoltaic process at different temperatures remain unclear. Based on a stable absorber of CsPbI2.85 (BrCl)0.15 , considerable variation of corresponding device performance is revealed over temperature and further demonstrates a simple approach to an effective reduction of such variation. Interestingly, this absorber is found to be excitonic with poor carrier transport even at an ambient temperature of 285 K and below. With a novel device configuration of a PTB7-th/perovskite bulk heterojunction, exciton dissociation and carrier extraction is facilitated. The resultant solar cell attains a best power conversion efficiency (PCE) of 17.2% with the fill factor of ≈84%, which represents the highest-efficiency γ-phase IPSCs reported to date. Importantly, this device is less sensitive to operation temperature, wherein the PCE variation over the temperature range from 210 to 360 K is 60% suppressed compared with the reference. The approach is effectively extended to other IPSCs with different photoactive phases, which may shed light on realizing highly efficient IPSCs for specific scenarios such as polar regions, near-space, and exoplanet exploration.

Promoting Energy Transfer via Manipulation of Crystallization Kinetics of Quasi-2D Perovskites for Efficient Green Light-Emitting Diodes.

Quasi-2D (Q-2D) perovskites are promising materials applied in light-emitting diodes (LEDs) due to their high exciton binding energy and quantum confinement effects. However, Q-2D perovskites feature a multiphase structure with abundant grain boundaries and interfaces, leading to nonradiative loss during the energy-transfer process. Here, a more efficient energy transfer in Q-2D perovskites is achieved by manipulating the crystallization kinetics of different-n phases. A series of alkali-metal bromides is utilized to manipulate the nucleation and growth of Q-2D perovskites, which is likely associated with the Coulomb interaction between alkali-metal ions and the negatively charged PbBr6 4- frames. The incorporation of K+ is found to restrict the nucleation of high-n phases and allows the subsequent growth of low-n phases, contributing to a spatially more homogeneous distribution of different-n phases and promoted energy transfer. As a result, highly efficient green Q-2D perovskites LEDs with a champion EQE of 18.15% and a maximum brightness of 25 800 cd m-2 are achieved. The findings affirm a novel method to optimize the performance of Q-2D perovskite LEDs.

Synergistic Effects of Eu-MOF on Perovskite Solar Cells with Improved Stability.

Enhancing device lifetime is one of the essential challenges in perovskite solar cells. The ultrathin Eu-MOF layer is introduced at the interface between the electron-transport layer and the perovskite absorber to improve the device stability. Both Eu ions and organic ligands in the MOF can reduce the defect concentration and improve carrier transport. Moreover, due to the Förster resonance energy transfer effect, Eu-MOF in perovskite films can improve light utilization and reduce the decomposition under ultraviolet light. Meanwhile, Eu-MOF also turns tensile strain to compressive strain in the perovskite films. As a result, the corresponding devices achieve a champion power conversion efficiency (PCE) of 22.16%. In addition, the devices retain 96% of their original PCE after 2000 h under the relative humidity of 30% and 91% of their original PCE after 1200 h after continuous 85 °C aging condition in N2 .

High-Quality Perovskite Films Grown with a Fast Solvent-Assisted Molecule Inserting Strategy for Highly Efficient and Stable Solar Cells.

The performance of organolead halide perovskites based solar cells has been enhanced dramatically due to the morphology control of the perovskite films. In this paper, we present a fast solvent-assisted molecule inserting (S-AMI) strategy to grow high-quality perovskite film, in which the methylammonium iodide/2-propanol (MAI/IPA) solution is spin-coated onto a dimethylformamide (DMF) wetted mixed lead halide (PbX2) precursor film. The DMF can help the inserting of MAI molecules into the PbX2 precursor film and provide a solvent environment to help the grain growth of the perovskite film. The perovskite film grown by the S-AMI approach shows large and well-oriented grains and long carrier lifetime due to the reduced grain boundary. Solar cells constructed with these perovskite films yield an average efficiency over 17% along with a high average fill factor of 80%. Moreover, these unsealed solar cell devices exhibit good stability in an ambient atmosphere.

Smooth and solid WS2 submicrospheres grown by a new laser fragmentation and reshaping process with enhanced tribological properties.

Smooth and solid WS2 submicrospheres were prepared by a laser irradiation induced fragmentation and morphological reshaping process using bulk-slice WS2 particles as targets in solution. Such submicrospheres as additives in paraffin liquid show remarkably enhanced friction reduction and anti-wear properties in comparison with raw WS2 slices.

Near Room Temperature, Fast-Response, and Highly Sensitive Triethylamine Sensor Assembled with Au-Loaded ZnO/SnO2 Core-Shell Nanorods on Flat Alumina Substrates.

Chemiresistive gas sensors with low power consumption, fast response, and reliable fabrication process for a specific target gas have been now created for many applications. They require both sensitive nanomaterials and an efficient substrate chip for heating and electrical addressing. Herein, a near room working temperature and fast response triethylamine (TEA) gas sensor has been fabricated successfully by designing gold (Au)-loaded ZnO/SnO2 core-shell nanorods. ZnO nanorods grew directly on Al2O3 flat electrodes with a cost-effective hydrothermal process. By employing pulsed laser deposition (PLD) and DC-sputtering methods, the construction of Au nanoparticle-loaded ZnO/SnO2 core/shell nanorod heterostructure is highly controllable and reproducible. In comparison with pristine ZnO, SnO2, and Au-loaded ZnO, SnO2 sensors, Au-ZnO/SnO2 nanorod sensors exhibit a remarkably high and fast response to TEA gas at working temperatures as low as 40 °C. The enhanced sensing property of the Au-ZnO/SnO2 sensor is also discussed with the semiconductor depletion layer model introduced by Au-SnO2 Schottky contact and ZnO/SnO2 N-N heterojunction.