RESUMO
Adiabatic decompression of paraquadrupolar materials has significant potential as a cryogenic cooling technology. We focus on TmVO[Formula: see text], an archetypal material that undergoes a continuous phase transition to a ferroquadrupole-ordered state at 2.15 K. Above the phase transition, each Tm ion contributes an entropy of [Formula: see text] due to the degeneracy of the crystal electric field groundstate. Owing to the large magnetoelastic coupling, which is a prerequisite for a material to undergo a phase transition via the cooperative Jahn-Teller effect, this level splitting, and hence the entropy, can be readily tuned by externally induced strain. Using a dynamic technique in which the strain is rapidly oscillated, we measure the adiabatic elastocaloric response of single-crystal TmVO[Formula: see text], and thus experimentally obtain the entropy landscape as a function of strain and temperature. The measurement confirms the suitability of this class of materials for cryogenic cooling applications and provides insight into the dynamic quadrupole strain susceptibility.
RESUMO
Resonant ultrasound spectroscopy (RUS) is a powerful technique for measuring the full elastic tensor of a given material in a single experiment. Previously, this technique was practically limited to regularly shaped samples such as rectangular parallelepipeds, spheres, and cylinders [W. M. Visscher et al. J. Acoust. Soc. Am. 90, 2154 (1991)JASMAN0001-496610.1121/1.401643]. We demonstrate a new method for determining the elastic moduli of irregularly shaped samples, extending the applicability of RUS to a much larger set of materials. We apply this new approach to the recently discovered unconventional superconductor UTe_{2} and provide its elastic tensor at both 300 and 4 kelvin.
RESUMO
Surface acoustic waves (SAWs) provide a contactless method for measuring wave-vector-dependent conductivity. This technique has been used to discover emergent length scales in the fractional quantum Hall regime of traditional, semiconductor-based heterostructures. SAWs would appear to be an ideal match for van der Waals heterostructures, but the right combination of substrate and experimental geometry to allow access to the quantum transport regime has not yet been found. We demonstrate that SAW resonant cavities fabricated on LiNbO_{3} substrates can be used to access the quantum Hall regime of high-mobility, hexagonal boron nitride encapsulated, graphene heterostructures. Our work establishes SAW resonant cavities as a viable platform for performing contactless conductivity measurements in the quantum transport regime of van der Waals materials.
Assuntos
Grafite , SomRESUMO
A solid object's geometry, density, and elastic moduli completely determine its spectrum of normal modes. Solving the inverse problem-determining a material's elastic moduli given a set of resonance frequencies and sample geometry-relies on the ability to compute resonance spectra accurately and efficiently. Established methods for calculating these spectra are either fast but limited to simple geometries, or are applicable to arbitrarily shaped samples at the cost of being prohibitively slow. Here, we describe a method to rapidly compute the normal modes of irregularly shaped objects using entirely open-source software. Our method's accuracy compares favorably with existing methods for simple geometries and shows a significant improvement in speed over existing methods for irregular geometries.
RESUMO
We present in situ calorimetry, thermal conductivity, and thermal diffusivity measurements of materials using temperature-sensing optical wireless integrated circuits (OWiCs). These microscopic and untethered optical sensors eliminate input wires and reduce parasitic effects. Each OWiC has a mass of â¼100 ng, a 100-µm-scale footprint, and a thermal response time of microseconds. We demonstrate that they can measure the thermal properties of nearly any material, from aerogels to metals, on samples as small as 100 ng and over thermal diffusivities covering four orders of magnitude. They also function over a broad temperature range, and we present proof-of-concept measurements of the thermodynamic phase transitions in both liquid crystal 5CB and gadolinium.
Assuntos
Cristais Líquidos , Condutividade Térmica , Temperatura , Calorimetria , TermodinâmicaRESUMO
One of the main developments in unconventional superconductivity in the past two decades has been the discovery that most unconventional superconductors form phase diagrams that also contain other strongly correlated states. Many systems of interest are therefore close to more than one instability, and tuning between the resultant ordered phases is the subject of intense research1. In recent years, uniaxial pressure applied using piezoelectric-based devices has been shown to be a particularly versatile new method of tuning2,3, leading to experiments that have advanced our understanding of the fascinating unconventional superconductor Sr2RuO4 (refs. 4-9). Here we map out its phase diagram using high-precision measurements of the elastocaloric effect in what we believe to be the first such study including both the normal and the superconducting states. We observe a strong entropy quench on entering the superconducting state, in excellent agreement with a model calculation for pairing at the Van Hove point, and obtain a quantitative estimate of the entropy change associated with entry to a magnetic state that is observed in proximity to the superconductivity. The phase diagram is intriguing both for its similarity to those seen in other families of unconventional superconductors and for extra features unique, so far, to Sr2RuO4.
RESUMO
Topological semimetals are predicted to exhibit unconventional electrodynamics, but a central experimental challenge is singling out the contributions from the topological bands. TaAs is the prototypical example, where 24 Weyl points and 8 trivial Fermi surfaces make the interpretation of any experiment in terms of band topology ambiguous. We report magneto-infrared reflection spectroscopy measurements on TaAs. We observed sharp inter-Landau level transitions from a single pocket of Weyl Fermions in magnetic fields as low as 0.4 tesla. We determine the W2 Weyl point to be 8.3 meV below the Fermi energy, corresponding to a quantum limitthe field required to reach the lowest LLof 0.8 teslaunprecedentedly low for Weyl Fermions. LL spectroscopy allows us to isolate these Weyl Fermions from all other carriers in TaAs, and our result provides a way for directly exploring the more exotic quantum phenomena in Weyl semimetals, such as the chiral anomaly.
RESUMO
PURPOSE: The use of hernia mesh is a common practice in abdominal wall reconstruction (AWR) operations. The high cost of biologic mesh has raised questions about the value of its use in AWR. Resorbable synthetic mesh may have the potential benefits of biologic mesh, minimizing the need for removal when infected, at a lower cost. METHODS: A hernia program has implemented the principles of clinical quality improvement (CQI) to improve patient outcomes. One process improvement attempt was implemented using a newly available resorbable synthetic scaffold. Long-term follow-up was obtained as a part of the CQI process. RESULTS: A total of 91 patients undergoing AWR were included between 8/11 and 9/15 (49 months). There were 58 female (64%) and 33 male (36%) patients. The average age was 57.2 years (28-80). The average BMI was 34.0 (17.6-53.4). There were 52 patients (57%) with recurrent hernias. Mean hernia defect size was 306.6 cm2 (24-720) and mean mesh size was 471.7 cm2 (112-600). Outcomes included a mean length of stay of 7.5 days (0-49), a recurrence rate of 12% (11/91) and a wound complication rate of 27% (25/91). The recurrence rate decreased to 4.5% (3/66) after several improvements, including adopting a transversus abdominus release (TAR) approach, were implemented. There were no mesh-related complications and no mesh removal (partial or total) was required. The mean follow-up length was 42.4 months (0-102). CONCLUSION: In this group of patients, an attempt at process improvement was implemented using a resorbable synthetic scaffold for AWR. With no mesh-related complications and no mesh removals required, there was an improvement in value due to the decrease in mesh cost and improved outcomes over time. Long-term follow-up demonstrated the durability of the repair.
Assuntos
Parede Abdominal , Hérnia Ventral , Parede Abdominal/cirurgia , Feminino , Hérnia Ventral/etiologia , Hérnia Ventral/cirurgia , Herniorrafia/efeitos adversos , Humanos , Masculino , Pessoa de Meia-Idade , Melhoria de Qualidade , Recidiva , Estudos Retrospectivos , Telas Cirúrgicas/efeitos adversos , Resultado do TratamentoRESUMO
A variety of 'strange metals' exhibit resistivity that decreases linearly with temperature as the temperature decreases to zero1-3, in contrast to conventional metals where resistivity decreases quadratically with temperature. This linear-in-temperature resistivity has been attributed to charge carriers scattering at a rate given by h/τ = αkBT, where α is a constant of order unity, h is the Planck constant and kB is the Boltzmann constant. This simple relationship between the scattering rate and temperature is observed across a wide variety of materials, suggesting a fundamental upper limit on scattering-the 'Planckian limit'4,5-but little is known about the underlying origins of this limit. Here we report a measurement of the angle-dependent magnetoresistance of La1.6-xNd0.4SrxCuO4-a hole-doped cuprate that shows linear-in-temperature resistivity down to the lowest measured temperatures6. The angle-dependent magnetoresistance shows a well defined Fermi surface that agrees quantitatively with angle-resolved photoemission spectroscopy measurements7 and reveals a linear-in-temperature scattering rate that saturates at the Planckian limit, namely α = 1.2 ± 0.4. Remarkably, we find that this Planckian scattering rate is isotropic, that is, it is independent of direction, in contrast to expectations from 'hotspot' models8,9. Our findings suggest that linear-in-temperature resistivity in strange metals emerges from a momentum-independent inelastic scattering rate that reaches the Planckian limit.
RESUMO
Two-dimensional (2D) hybrid organic-inorganic perovskites consisting of alternating organic and inorganic layers are a new class of layered structures. They have attracted increasing interest for photovoltaic, optoelectronic, and thermoelectric applications, where knowing their thermal transport properties is critical. We carry out both experimental and computational studies on thermal transport properties of 2D butylammonium lead iodide crystals and find their thermal conductivity is ultralow (below 0.3 W m-1 K-1) with very weak anisotropy (around 1.5) among layered crystals. Further analysis reveals that the unique structure with the preferential alignment of organic chains and complicated energy landscape leads to moderately smaller phonon lifetimes in the out-of-plane direction and comparable phonon group velocities in in-plane and out-of-plane directions. These new findings may guide the future design of novel hybrid materials with desired thermal conductivity for various applications.
RESUMO
High magnetic fields have revealed a surprisingly small Fermi surface in underdoped cuprates, possibly resulting from Fermi-surface reconstruction due to an order parameter that breaks translational symmetry of the crystal lattice. A crucial issue concerns the doping extent of such a state and its relationship to the principal pseudogap and superconducting phases. We employ pulsed magnetic-field measurements on the cuprate [Formula: see text]Cu[Formula: see text] to identify signatures of Fermi-surface reconstruction from a sign change of the Hall effect and a peak in the temperature-dependent planar resistivity. We trace the termination of Fermi-surface reconstruction to two hole concentrations where the superconducting upper critical fields are found to be enhanced. One of these points is associated with the pseudogap endpoint near optimal doping. These results connect the Fermi-surface reconstruction to both superconductivity and the pseudogap phenomena.
RESUMO
The unusual correlated state that emerges in URu2Si2 below T HO = 17.5 K is known as "hidden order" because even basic characteristics of the order parameter, such as its dimensionality (whether it has one component or two), are "hidden." We use resonant ultrasound spectroscopy to measure the symmetry-resolved elastic anomalies across T HO. We observe no anomalies in the shear elastic moduli, providing strong thermodynamic evidence for a one-component order parameter. We develop a machine learning framework that reaches this conclusion directly from the raw data, even in a crystal that is too small for traditional resonant ultrasound. Our result rules out a broad class of theories of hidden order based on two-component order parameters, and constrains the nature of the fluctuations from which unconventional superconductivity emerges at lower temperature. Our machine learning framework is a powerful new tool for classifying the ubiquitous competing orders in correlated electron systems.
RESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
Although crystals of strongly correlated metals exhibit a diverse set of electronic ground states, few approaches exist for spatially modulating their properties. In this study, we demonstrate disorder-free control, on the micrometer scale, over the superconducting state in samples of the heavy-fermion superconductor CeIrIn5 We pattern crystals by focused ion beam milling to tailor the boundary conditions for the elastic deformation upon thermal contraction during cooling. The resulting nonuniform strain fields induce complex patterns of superconductivity, owing to the strong dependence of the transition temperature on the strength and direction of strain. These results showcase a generic approach to manipulating electronic order on micrometer length scales in strongly correlated matter without compromising the cleanliness, stoichiometry, or mean free path.
RESUMO
In 2014 the International Endohernia Society (IEHS) published the first international "Guidelines for laparoscopic treatment of ventral and incisional abdominal wall hernias". Guidelines reflect the currently best available evidence in diagnostics and therapy and give recommendations to help surgeons to standardize their techniques and to improve their results. However, science is a dynamic field which is continuously developing. Therefore, guidelines require regular updates to keep pace with the evolving literature. METHODS: For the development of the original guidelines all relevant literature published up to year 2012 was analyzed using the ranking of the Oxford Centre for Evidence-Based-Medicine. For the present update all of the previous authors were asked to evaluate the literature published during the recent years from 2012 to 2017 and revise their statements and recommendations given in the initial guidelines accordingly. In two Consensus Conferences (October 2017 Beijing, March 2018 Cologne) the updates were presented, discussed, and confirmed. To avoid redundancy, only new statements or recommendations are included in this paper. Therefore, for full understanding both of the guidelines, the original and the current, must be read. In addition, the new developments in repair of abdominal wall hernias like surgical techniques within the abdominal wall, release operations (transversus muscle release, component separation), Botox application, and robot-assisted repair methods were included. RESULTS: Due to an increase of the number of patients and further development of surgical techniques, repair of primary and secondary abdominal wall hernias attracts increasing interests of many surgeons. Whereas up to three decades ago hernia-related publications did not exceed 20 per year, currently this number is about 10-fold higher. Recent years are characterized by the advent of new techniques-minimal invasive techniques using robotics and laparoscopy, totally extraperitoneal repairs, novel myofascial release techniques for optimal closure of large defects, and Botox for relaxing the abdominal wall. Furthermore, a concomitant rectus diastasis was recognized as a significant risk factor for recurrence. Despite still insufficient evidence with respect to these new techniques it seemed to us necessary to include them in the update to stimulate surgeons to do research in these fields. CONCLUSION: Guidelines are recommendations based on best available evidence intended to help the surgeon to improve the quality of his daily work. However, science is a continuously evolving process, and as such guidelines should be updated about every 3 years. For a comprehensive reference, however, it is suggested to read both the initially guidelines published in 2014 together with the update. Moreover, the presented update includes also techniques which were not known 3 years before.
Assuntos
Parede Abdominal/cirurgia , Hérnia Ventral/cirurgia , Herniorrafia/normas , Laparoscopia/normas , Medicina Baseada em Evidências , Herniorrafia/métodos , Humanos , Laparoscopia/métodos , Sociedades MédicasRESUMO
This article was updated to include the middle initial of author L. N. Jorgensen's name.
RESUMO
In 2014, the International Endohernia Society (IEHS) published the first international "Guidelines for laparoscopic treatment of ventral and incisional abdominal wall hernias." Guidelines reflect the currently best available evidence in diagnostics and therapy and give recommendations to help surgeons to standardize their techniques and to improve their results. However, science is a dynamic field which is continuously developing. Therefore, guidelines require regular updates to keep pace with the evolving literature. METHODS: For the development of the original guidelines, all relevant literature published up to year 2012 was analyzed using the ranking of the Oxford Centre for Evidence-Based Medicine. For the present update, all of the previous authors were asked to evaluate the literature published during the recent years from 2012 to 2017 and revise their statements and recommendations given in the initial guidelines accordingly. In two Consensus Conferences (October 2017 Beijing, March 2018 Cologne), the updates were presented, discussed, and confirmed. To avoid redundancy, only new statements or recommendations are included in this paper. Therefore, for full understanding both of the guidelines, the original and the current, must be read. In addition, the new developments in repair of abdominal wall hernias like surgical techniques within the abdominal wall, release operations (transversus muscle release, component separation), Botox application, and robot-assisted repair methods were included. RESULTS: Due to an increase of the number of patients and further development of surgical techniques, repair of primary and secondary abdominal wall hernias attracts increasing interests of many surgeons. Whereas up to three decades ago hernia-related publications did not exceed 20 per year, currently this number is about 10-fold higher. Recent years are characterized by the advent of new techniques-minimal invasive techniques using robotics and laparoscopy, totally extraperitoneal repairs, novel myofascial release techniques for optimal closure of large defects, and Botox for relaxing the abdominal wall. Furthermore, a concomitant rectus diastasis was recognized as a significant risk factor for recurrence. Despite insufficient evidence with respect to these new techniques, it seemed to us necessary to include them in the update to stimulate surgeons to do research in these fields. CONCLUSION: Guidelines are recommendations based on best available evidence intended to help the surgeon to improve the quality of his daily work. However, science is a continuously evolving process, and as such guidelines should be updated about every 3 years. For a comprehensive reference, however, it is suggested to read both the initial guidelines published in 2014 together with the update. Moreover, the presented update includes also techniques which were not known 3 years before.
Assuntos
Hérnia Abdominal/cirurgia , Hérnia Ventral/cirurgia , Hérnia Incisional/cirurgia , Laparoscopia , Hérnia Abdominal/diagnóstico por imagem , Hérnia Ventral/diagnóstico por imagem , Herniorrafia/métodos , Herniorrafia/normas , Humanos , Hérnia Incisional/diagnóstico por imagem , Complicações Intraoperatórias , Imageamento por Ressonância Magnética , Obesidade/complicações , Posicionamento do Paciente , Complicações Pós-Operatórias , Recidiva , Procedimentos Cirúrgicos Robóticos , Telas Cirúrgicas , Tomografia Computadorizada por Raios XRESUMO
We present a high magnetic field study of NbP-a member of the monopnictide Weyl semimetal (WSM) family. While the monoarsenides (NbAs and TaAs) have topologically distinct left and right-handed Weyl fermi surfaces, NbP is argued to be "topologically trivial" due to the fact that all pairs of Weyl nodes are encompassed by a single Fermi surface. We use torque magnetometry to measure the magnetic response of NbP up to 60 tesla and uncover a Berry paramagnetic response, characteristic of the topological Weyl nodes, across the entire field range. At the quantum limit B* (≈32 T), τ/B experiences a change in slope when the chemical potential enters the last Landau level. Our calculations confirm that this magnetic response arises from band topology of the Weyl pocket, even though the Fermi surface encompasses both Weyl nodes at zero magnetic field. We also find that the magnetic field pulls the chemical potential to the chiral n = 0 Landau level in the quantum limit, providing a disorder-free way of accessing chiral Weyl fermions in systems that are "not quite" WSMs in zero magnetic field.
RESUMO
The phenomenon of T-linear resistivity commonly observed in a number of strange metals has been widely seen as evidence for the breakdown of the quasiparticle picture of metals. This study shows that a recently discovered H/T scaling relationship in the magnetoresistance of the strange metal BaFe_{2}(As_{1-x}P_{x})_{2} is independent of the relative orientations of current and magnetic field. Rather, its magnitude and form depend only on the orientation of the magnetic field with respect to a single crystallographic axis: the direction perpendicular to the magnetic iron layers. This finding suggests that the magnetotransport scaling does not originate from the conventional averaging or orbital velocity of quasiparticles as they traverse a Fermi surface, but rather from dissipation arising from two-dimensional correlations.
RESUMO
Unusual behavior in quantum materials commonly arises from their effective low-dimensional physics, reflecting the underlying anisotropy in the spin and charge degrees of freedom. Here we introduce the magnetotropic coefficient k = ∂2F/∂θ2, the second derivative of the free energy F with respect to the magnetic field orientation θ in the crystal. We show that the magnetotropic coefficient can be quantitatively determined from a shift in the resonant frequency of a commercially available atomic force microscopy cantilever under magnetic field. This detection method enables part per 100 million sensitivity and the ability to measure magnetic anisotropy in nanogram-scale samples, as demonstrated on the Weyl semimetal NbP. Measurement of the magnetotropic coefficient in the spin-liquid candidate RuCl3 highlights its sensitivity to anisotropic phase transitions and allows a quantitative comparison to other thermodynamic coefficients via the Ehrenfest relations.