RESUMO
We report a full experimental comparison study on the injection of a Ti:Sa multi-terawatt amplifier chain with a standard 15 fs Ti:Sa oscillator and 35 fs frequency-doubled fiber oscillator. The study highlights that the Ti:Sa oscillator, with high performance in terms of pulse duration and spectral width, can be replaced by the frequency-doubled fiber oscillator to seed Ti:Sa amplifier chains almost without any compromise on the output pulse duration and picosecond contrast. Finally, we demonstrate for the first time to our knowledge a 30 TW and 33 fs Ti:Sa amplifier injected by a fiber oscillator.
RESUMO
We demonstrate the impact of the optics roughness in Öffner stretchers used in chirped pulse amplification laser chains and how it is possible to improve the temporal contrast ratio in the temporal range of 10-100 ps by adequately choosing the optical quality of the key components. Experimental demonstration has been realized in the front-end source of the multi-petawatt (PW) laser facility Apollon, resulting in an enhancement of the contrast ratio by two to three orders of magnitude.
RESUMO
We present a diode-pumped regenerative amplifier based on an Yb:CaF(2) crystal optimized to produce short pulses for various repetition rates ranging from 100 Hz to 10 kHz. The shortest pulse duration generated is 178 fs, and the corresponding energy is 1.4 mJ before compression (620 microJ after), at a repetition rate of 500 Hz for 16 W of pump power. The bandwidth is 10 nm centered at 1040 nm. Higher repetition rate regimes have also been explored, allowing an optical-to-optical efficiency up to 10% at a high repetition rate.
