Application of spectrometric analysis to the identification of pollution sources causing cultural heritage damage.

Black crusts are recognized to have been, up to now, one of the major deterioration forms affecting the built heritage in urban areas. Their formation is demonstrated to occur mainly on carbonate building materials, whose interaction with an SO2-loaded atmosphere leads to the transformation of calcium carbonate (calcite) into calcium sulfate dihydrate (gypsum) which, together with embedded carbonaceous particles, consequently forms the black crusts on the stone surface. An analytical study was carried out on black crust samples collected from limestone monumental buildings and churches belonging to the European built Heritage, i.e., the Corner Palace in Venice (Italy), the Cathedral of St. Rombouts in Mechelen (Belgium), and the Church of St. Eustache in Paris (France). For a complete characterization of the black crusts, an approach integrating different and complementary techniques was used, including laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), Fourier transform infrared spectroscopy, optical and scanning electron microscopy. In particular, the application of LA-ICP-MS permitted to obtain a complete geochemical characterization in terms of trace elements of the black crusts from the inner parts to the external layers contributing to the identification of the major combustion sources responsible for the deterioration over time of the monuments under study. In addition, the obtained results revealed a relation between the height of sampling and the concentration of heavy metals and proved that the crust composition can be a marker to evaluate the variation of the fuels used over time.

An integrated approach to assess air pollution threats to cultural heritage in a semi-confined environment: the case study of Michelozzo's Courtyard in Florence (Italy).

An example of an integrated approach to assess air pollution threats to cultural heritage in a semi-confined environment is presented in this work, where the monitoring campaign carried out at the Michelozzo's Courtyard (in Palazzo Vecchio, Florence, Italy) is used as a case study. A wide research project was carried out, with the main aim of obtaining the first quantitative data on air quality and microclimate conditions inside the Courtyard, and, if possible, identifying the main causes of degradation and suggesting appropriate conservation strategies. The investigation adopted a holistic approach involving thermographic measurements on the wall paintings, microclimatic analysis, gaseous pollutant monitoring, atmospheric particles characterisation and dry deposition compositional analysis. Attention was focused on the wall painting depicting the city of Hall because of its anomalous and critical conservation conditions, which are visible at a glance, due to the contrast between a wide darker zone around the central subject of the painting and external lighter areas.

Vitamin C content and antioxidant activity of the fruit and of the Ayurvedic preparation of Emblica officinalis Gaertn.

Emblica officinalis Gaertn. is one of the most important plants of Ayurved, the traditional Indian medicine. In this ancient medicine, the fruit of Emblica officinalis is processed according to a method named "Svaras Bhavana", whereby the therapeutic potential of the plant is enhanced by treating the main herb with its own juice. For many years, the activity of the fruits was attributed to the high content of ascorbic acid; however, this has recently been questioned. The aim of the paper is to clarify this matter. A reliable and feasible HPLC method with diode array detection has been developed for the determination of ascorbic acid in Emblica fruit and particularly in Emblica fruit processed according to the Ayurvedic method. The antioxidant effects have also been evaluated in comparison to the real levels of Vitamin C by different antioxidant tests. The data obtained show that the Emblica fruit contains ascorbic acid (0.4%, w/w), and that the Ayurvedic method of processing increases the healthy characteristics of the fruit thanks to a higher antioxidant activity and a higher content of ascorbic acid (1.28%, w/w). It has also been found that Vitamin C accounts for approximately 45-70% of the antioxidant activity.

Analysis of reboxetine, a novel antidepressant drug, in pharmaceutical tablets by capillary electrophoresis and derivative spectrophotometry.

The recent antidepressant drug reboxetine was quantified in pharmaceutical tablets by derivative spectrophotometry and capillary zone electrophoresis. The feasible sample pretreatment consists of a single extraction with a pH 2.5 phosphate buffer, centrifugation and dilution. For the spectrophotometric assay, the fourth derivative of the absorbance was used which gave satisfactory results in terms of accuracy (mean recovery 99.7%) and precision (mean RSD 3.4%). The electrophoretic experiments were carried out using the shortest effective length of the capillary (8.5 cm) in order to obtain a very rapid separation of reboxetine and dibenzepine used as the internal standard. Using a pH 2.5, 50 mM phosphate buffer as the background electrolyte, each analysis lasted less than 2.5 min. Accuracy (101.3%) and precision (1.5%) were very good.

Simultaneous high-performance liquid chromatography determination of carbamazepine and five of its metabolites in plasma of epileptic patients.

A high-performance liquid chromatographic method with UV detection for the simultaneous analysis of the antiepileptic drug carbamazepine and five of its metabolites in human plasma has been developed. The analysis was carried out on a reversed-phase column (C8, 150x4.6 mm I.D., 5 microm) using acetonitrile, methanol and a pH 1.9 phosphate buffer as the mobile phase. Under these chromatographic conditions, carbamazepine and its metabolites 10,11-dihydro-10,11-epoxycarbamazepine, 10,11-dihydro-10,11-dihydroxycarbamazepine, 2-hydroxycarbamazepine, 3-hydroxycarbamazepine and 10,11-dihydro-10-hydroxycarbamazepine are baseline separated in less than 18 min. The extraction of the analytes from plasma samples was performed by means of an original solid-phase extraction procedure using Oasis HLB cartridges. The method requires only 250 microl of plasma for one complete analysis. The repeatability (RSD%<2.4), intermediate precision (RSD%<3.5) and extraction yield (84.8-103.0%) were very good for all analytes. The method is suitable for reliable therapeutic drug monitoring of patients undergoing chronic treatment with carbamazepine and for kinetic-metabolic studies of this drug.

Rapid capillary electrophoretic method for the determination of clozapine and desmethylclozapine in human plasma.

A rapid and sensitive high-performance capillary electrophoretic method for the determination of clozapine and its main metabolite desmethylclozapine in human plasma was developed. The separation of the two analytes was carried out in an untreated fused-silica capillary [33 cm (8.5 cm effective length) x 50 microm I.D.] filled with a background electrolyte at pH 2.5 containing beta-cyclodextrin. Baseline separation of clozapine and desmethylclozapine was recorded in less than 3 min. An accurate sample pretreatment by means of solid-phase extraction and subsequent concentration allows for reliable quantitation of clozapine in the plasma of schizophrenic patients under treatment with the drug. The method showed good precision (mean RSD = 4.0%) as well as satisfactory extraction yields (approximately 88%) and a good sensitivity (limit of quantitation = 0.075 microg ml(-1), limit of detection = 0.025 microg ml(-1)).

Quality control of benserazide-levodopa and carbidopa-levodopa tablets by capillary zone electrophoresis.

In modern practice, the treatment of Parkinson's disease and syndrome is carried out using pharmaceutical formulations containing a combination of levodopa and a decarboxylation inhibitor (carbidopa or benserazide). Two pharmaceutical formulations were quantified by capillary zone electrophoresis using two procedures which differed only in the kind of background electrolyte used. One procedure used a 25 mM phosphate buffer, pH 2.5, while the second one used a 25 mM borate buffer, pH 8.5. The electrophoretic analysis was carried out using an uncoated fused- silica capillary, a separation voltage of 20 kV with currents typically less than 60 microA, and spectrophotometric detection at 205 nm. Calibration curves were performed for levodopa (concentration range 1-100 microg/mL), for carbidopa and benserazide (1-50 microg/mL), and the plots of the peak area versus concentration were found to be linear with a correlation coefficient better than 0.9990. Satisfactory results were obtained when commercial tablets were analyzed in terms of accuracy (98-102%), repeatability (0.6-2.0%), and intermediate precision (1.1-2.6%).

A rapid LC method for the identification and determination of CNS drugs in pharmaceutical formulations.

Antidepressant, neuroleptic and antiepileptic drugs were identified and determined in pharmaceutical formulations (tablets, capsules and oral solutions) by a rapid high-performance liquid chromatography method. The sample pretreatment consisted of a one-step extraction, filtration and dilution. The chromatographic conditions were: reversed-phase C8 column (150 x 4.6 mm i.d., 5 microm); acetonitrile-tetramethylammonium perchlorate aqueous solution (pH 2.8; 12.6 mM) (45:55, v/v) as the mobile phase; detection wavelength, 230 nm. Calibration curves were linear in the 100-1000 ng ml(-1) range for all tested drugs except for phenobarbital. The repeatability (or intra-day precision), expressed by the relative standard deviation, was better than 2.0%. The accuracy, resulting from recovery studies, was between 98.1 and 101.3%. The amount of drug found agreed with the declared content within the limits specified by United States Pharmacopeia and British Pharmacopeia.

Extractive analysis of aluminum traces in dialysis solutions.

A very sensitive procedure for the fluorimetric determination of aluminum traces in dialysis solutions by means of Mordant Red 19 dyestuff is described with the extraction of the Al complex in isobutylmethylketone. The experimental conditions were studied, in order to obtain the best extraction yield. The emission intensity of the metal chelate, extracted in the organic layer, was measured at 549 nm, exciting at 485 nm. Linearity between emission intensity and Al concentration was found in the 1-30 ng/ml range. The limit of detection was 0.25 ng/ml. The method resulted to be suitable for the determination of Al traces in commercial dialysis solutions for toxicological purposes.

Determination of catecholamines in human plasma by high-performance liquid chromatography with electrochemical detection.

In the present study, assays were improved for the determination of catecholamines in human plasma. High-performance liquid chromatography with electrochemical detection was employed for quantitative analysis. The influence of various parameters on chromatographic performance, such as the composition and the pH of the mobile phase, and the detection potential, was investigated. An accurate solid-phase extraction procedure, after catecholamine complexation with diphenylborate, was developed. The efficiency yield for all catecholamines was in the range 92-98%. Relative standard deviation values for repeatability and for intermediate precision were less than 2% and 3%, respectively, for all three analytes.

Fluorimetric determination of aluminum traces in hemodialysis solutions using Mordant Red 19.

A sensitive and accurate method for the spectrofluorimetric determination of trace levels of aluminum in hemodialysis solutions using Mordant Red 19 as the complexation reagent has been developed. The optimal experimental conditions for the concentration of fluorimetric reagent, pH, temperature, and the specific type of matrix are reported. The emission of the fluorescent metal chelate was measured at 555 nm, excitation at 478 nm. Linearity between emission intensity and aluminum concentration was found in the 2-20 ppb range in standard aluminum solutions. Limit of detection was 0.4 ppb. The aluminum amounts in some commercial hemodialysis solutions were determined by means of the extrapolation method. The proposed method proved to be suitable in terms of sensitivity and accuracy for the determination of aluminum in dialysis fluids.

Spectrophotometric determination of silicate traces in hemodialysis solutions.

Reliable methods for the analysis of silicon are of great importance, because it seems that the silicate anion can reduce aluminum bioavailability in patients undergoing dialysis. Thus, a simple and sensitive spectrophotometric method is described for the determination of silicate traces in dialysis solutions. The method is based on the reaction between silicate ions and excess ammonium molybdate reagent to give a yellow silico-molybdic complex. This complex is then reduced to the heteropoly blue compound by means of ascorbic acid. Absorbance values are measured at 830 nm, and are stable for more than 2 h. A good linearity was obtained up to 300 ng ml(-1) of silicon concentration. The accuracy and the precision of the method were good; relative standard deviation values of 2% intraday and of 3.9% interday for six replicates on 40 ng ml(-1) standard silicate solutions were found. Results of the analysis of some commercial hemodialysis solution samples, obtained by means of the 'standard additions' method, are provided.