Multilayer microparticles for programmed sequential release of phenolic compounds from Eugenia stipitata: Stability and bioavailability.

A co-delivery system based on multilayer microparticles was developed and characterized for the sequential release of phenolic compounds (PCs) using different encapsulation processes (spray drying: SD and drying-chilling spray: SDC) and wall materials to improve the stability and bioavailability of PCs. Samples were characterized in terms of process yield (PY%), phenolic retention efficiency (PRE%), chemical structure and crystallinity (NMR, FTIR, DXR), thermal stability (DSC and FT-IR), anti-radical capacity (ORAC and ABTS) and in vitro digestion. PRE% of samples by SD were higher (p < 0.05) than SDC due to the formation of PCs from CRF (cará-roxo flour). NMR, FTIR, DXR confirmed the presence of key components and interactions for the formation of the advanced co-delivery system. The SDC particles showed crystalline regions by XRD and were stable at ∼47 °C. All samples showed good release of PC in the intestinal phase, and antiradical capacity that reached 23.66 µmol TE g-1.

Correction: Freitas et al. Bacterial Cellulose/Tomato Puree Edible Films as Moisture Barrier Structures in Multicomponent Foods. Foods 2022, 11, 2336.

In the original publication [...].

Bacterial Cellulose/Tomato Puree Edible Films as Moisture Barrier Structures in Multicomponent Foods.

Edible films have been studied mainly as primary packaging materials, but they may be used as barrier layers between food components, e.g., by reducing the moisture migration between components with contrasting water activities. Since edible films are part of the food itself, components adding sensory appeal (e.g., fruit purees) are usually desirable. The objective of this study was to develop a film to be applied as a moisture barrier between nachos and guacamole. Ten film formulations were prepared according to a simplex centroid design with three components-a polysaccharide matrix (consisting of a 5:1 mixture of bacterial cellulose-BC-and carboxymethyl cellulose), tomato puree (for sensory appeal), and palm olein (to reduce hydrophilicity)-and produced by bench casting. The film with the highest palm olein content (20%) presented the lowest water vapor permeability, and its formulation was used to produce a film by continuous casting. The film was applied as a layer between nachos and guacamole, and presented to 80 panelists. The film-containing snack was preferred and considered as crispier when compared to the snack without the film, suggesting that the film was effective in reducing the moisture migration from the moist guacamole to the crispy nachos.

Evaluation of Vitek MS for Differentiation of Cryptococcus neoformans and Cryptococcus gattii Genotypes.

Cryptococcus neoformans and Cryptococcus gattii are the main pathogenic species of invasive cryptococcosis among the Cryptococcus species. Taxonomic studies have shown that these two taxa have different genotypes or molecular types with biological and ecoepidemiological peculiarities. Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has been proposed as an alternative method for labor-intensive methods for C. neoformans and C. gattii genotype differentiation. However, Vitek MS, one of the commercial MALDI-TOF MS instruments, has not been yet been evaluated for this purpose. Thus, we constructed an in-house database with reference strains belonging to the different C. neoformans (VNI, VNII, VNIII, and VNIV) and C. gattii (VGI, VGII, VGIII, and VGIV) major molecular types by using the software Saramis Premium (bioMérieux, Marcy-l'Etoile, France). Then, this new database was evaluated for discrimination of the different genotypes. Our in-house database provided correct identification for all C. neoformans and C. gattii genotypes; however, due to the intergenotypic mass spectral similarities, a careful postanalytic evaluation is necessary to provide correct genotype identification.

Sample transport validation: experience of a medium-sized laboratory / Validação do transporte de amostras: experiência de um laboratório de médio porte

ABSTRACT INTRODUCTION: The adequacy of biological samples is a critical and important item in the clinical laboratory, so that reliable results can be obtained for patients. OBJECTIVE: To ensure integrity and stability of biological samples during the transport process. METHOD: Concurrent validation was carried out - in parallel with the production process and distribution of the product, from January to March 2017. The blood samples were packaged primarily in tube racks, and those of urine, feces and microbiological materials were packed in plastic bags. Materials were wrapped in a blanket of absorbent material to ensure temperature integrity and to avoid possible material losses. Thermal bags were the containers used to carry the samples. There were five transport routes, with two daily routes for each collection unit. A recommendation of the number of ice packs, predefined by the laboratory, was followed. RESULTS AND CONCLUSION: In the first month, the pre-established temperatures (blood: 10°C to 22°C/urine-feces: 2°C to 8°C) were not reached until arrival at the central laboratory, and the amount of ice in each bag was gradually increased, daily, until reaching the ideal temperature, in all collection units and the central. Transport routes were changed three times in the most distant units. Materials that arrived outside specifications were processed with restrictions, and results were evaluated by the professional responsible for the release. After these modifications, the temperature records of the biological materials were in accordance with the current legislation and the defined specifications, thus validating the process.

RESUMO INTRODUÇÃO: A adequação das amostras biológicas é um item crítico e importante no laboratório clínico, para que possamos oferecer resultados confiáveis aos pacientes. OBJETIVO: Garantir a integridade e a estabilidade das amostras biológicas durante o processo de transporte. MÉTODO: Foi realizada validação concorrente - concomitantemente ao processo produtivo e à distribuição do produto, no período de janeiro a março de 2017. As amostras de sangue foram acondicionadas primariamente em galerias; as de urina, fezes e materiais microbiológicos, em sacos plásticos. Os materiais foram envoltos por uma manta de material absorvente para garantir a integridade da temperatura e evitar possíveis perdas de material. Maletas térmicas foram os recipientes utilizados para transportar as amostras. Havia cinco rotas de transporte, com dois percursos diários para cada unidade de coleta. Foi seguida a recomendação da quantidade de barras de gelo predefinida pelo laboratório. RESULTADOS E CONCLUSÃO: No primeiro mês, as temperaturas preestabelecidas (sangue: 10°C a 22°C/urina e fezes: 2°C a 8°C) não foram atingidas até a chegada à matriz, e aumentou-se gradativamente a quantidade de gelo em cada maleta, com avaliações diárias, até se atingir a temperatura ideal, em todas as unidades de coleta e na matriz. Foi realizada mudança nas rotas de transporte com frequência de três vezes nas unidades mais distantes. Os materiais que chegaram fora das especificações foram processados com restrição; e os resultados, avaliados pelo profissional responsável pela liberação. Após essas modificações, os registros de temperatura dos materiais biológicos estavam de acordo com a legislação vigente e as especificações definidas, validando, portanto, o processo.

Use of lutein and zeaxanthin alone or combined with Brilliant Blue to identify intraocular structures intraoperatively.

PURPOSE: To determine whether a natural dye solution based on lutein and zeaxanthin alone or combined with Brilliant Blue stains and facilitates peeling of intraocular membranes in human eyes. METHODS: In this study of 60 cadaveric eyes, open-sky vitrectomy including posterior hyaloid detachment was performed. Different lutein and zeaxanthin concentrations (0.01-20%) were tested alone or combined with different Brilliant Blue concentrations (0.0125-0.025%) in the corneal endothelium, corneal epithelium, anterior and posterior capsule, vitreous cavity through the macula including the posterior hyaloid, and internal limiting membrane. The various dye solutions were in contact with the intraocular membranes for <1 minute and then were removed by mechanical aspiration or membrane peeling initiated and completed with intraocular forceps. The specimens were examined by light and electron transmission microscopy. RESULTS: Contact between lutein and zeaxanthin and the retinal, lens, and vitreous surface resulted in orange and greenish staining of the intraocular membranes, which facilitated surgical steps in all eyes. Lutein and zeaxanthin alone was useful for vitreous identification and lutein and zeaxanthin combined with Brilliant Blue had strong affinity for internal limiting membrane and anterior capsule. Light microscopy confirmed internal limiting membrane removal in all eyes tested. No dye solutions remained in the eyes after the membrane removal. CONCLUSION: A natural dye solution based on lutein and zeaxanthin alone or combined with Brilliant Blue efficiently stained the anterior capsule, vitreous, and internal limiting membrane in human cadaveric eyes and may be a useful tool for vitreoretinal or cataract surgery.