Understanding the role of imidazolium-based ionic liquids in the electrochemical CO2 reduction reaction.

The development of efficient CO2 capture and utilization technologies driven by renewable energy sources is mandatory to reduce the impact of climate change. Herein, seven imidazolium-based ionic liquids (ILs) with different anions and cations were tested as catholytes for the CO2 electrocatalytic reduction to CO over Ag electrode. Relevant activity and stability, but different selectivities for CO2 reduction or the side H2 evolution were observed. Density functional theory results show that depending on the IL anions the CO2 is captured or converted. Acetate anions (being strong Lewis bases) enhance CO2 capture and H2 evolution, while fluorinated anions (being weaker Lewis bases) favour the CO2 electroreduction. Differently from the hydrolytically unstable 1-butyl-3-methylimidazolium tetrafluoroborate, 1-Butyl-3-Methylimidazolium Triflate was the most promising IL, showing the highest Faradaic efficiency to CO (>95%), and up to 8 h of stable operation at high current rates (-20 mA & -60 mA), which opens the way for a prospective process scale-up.

Investigation of a Fluorine-Free Phosphonium-Based Ionic Liquid Electrolyte and Its Compatibility with Lithium Metal.

A novel fluorine-free ionic liquid electrolyte comprising lithium dicyanamide (LiDCA) and trimethyl(isobutyl)phosphonium tricyanomethanide (P111i4TCM) in a 1:9 molar ratio is studied as an electrolyte for lithium metal batteries. At room temperature, it demonstrates high ionic conductivity and viscosity of about 4.5 mS cm-1 and 64.9 mPa s, respectively, as well as a 4 V electrochemical stability window (ESW). Li stripping/plating tests prove the excellent electrolyte compatibility with Li metal, evidenced by the remarkable cycling stability over 800 cycles. The evolution of the Li-electrolyte interface upon cycling was investigated via electrochemical impedance spectroscopy, displaying a relatively low impedance increase after the initial formation cycles. Finally, the solid electrolyte interphase (SEI) formed on Li metal appeared to have a bilayer structure mostly consisting of DCA and TCM reduction products. Additionally, decomposition products of the phosphonium cation were also detected, despite prior studies reporting its stability against Li metal.

Designing 3D Multihierarchical Heteronanostructures for High-Performance On-Chip Hybrid Supercapacitors: Poly(3,4-(ethylenedioxy)thiophene)-Coated Diamond/Silicon Nanowire Electrodes in an Aprotic Ionic Liquid.

A versatile and robust hierarchically multifunctionalized nanostructured material made of poly(3,4-(ethylenedioxy)thiophene) (PEDOT)-coated diamond@silicon nanowires has been demonstrated to be an excellent capacitive electrode for supercapacitor devices. Thus, the electrochemical deposition of nanometric PEDOT films on diamond-coated silicon nanowire (SiNW) electrodes using N-methyl-N-propylpyrrolidinium bis((trifluoromethyl)sulfonyl)imide ionic liquid displayed a specific capacitance value of 140 F g(-1) at a scan rate of 1 mV s(-1). The as-grown functionalized electrodes were evaluated in a symmetric planar microsupercapacitor using butyltrimethylammonium bis((trifluoromethyl)sulfonyl)imide aprotic ionic liquid as the electrolyte. The device exhibited extraordinary energy and power density values of 26 mJ cm(-2) and 1.3 mW cm(-2) within a large voltage cell of 2.5 V, respectively. In addition, the system was able to retain 80% of its initial capacitance after 15 000 galvanostatic charge-discharge cycles at a high current density of 1 mA cm(-2) while maintaining a Coulombic efficiency around 100%. Therefore, this multifunctionalized hybrid device represents one of the best electrochemical performances concerning coated SiNW electrodes for a high-energy advanced on-chip supercapacitor.

Aluminium Electrodeposition from Ionic Liquid: Effect of Deposition Temperature and Sonication †.

Since their discovery, ionic liquids (ILs) have attracted a wide interest for their potential use as a medium for many chemical processes, in particular electrochemistry. As electrochemical media they allow the electrodeposition of elements that are impossible to reduce in aqueous media. We have investigated the electrodeposition of aluminium from 1-butyl-3-methyl-imidazolium chloride ((Bmim)Cl)/AlCl3 (40/60 mol %) as concerns the effect of deposition parameters on the quality of the deposits. Thick (20 µm) aluminium coatings were electrodeposited on brass substrates at different temperatures and mixing conditions (mechanical stirring and sonication). These coatings were investigated by means of scanning electron microscope, roughness measurements, and X-ray diffraction to assess the morphology and the phase composition. Finally, electrochemical corrosion tests were carried out with the intent to correlate the deposition parameters to the anti-corrosion properties.

3D hierarchical assembly of ultrathin MnO2 nanoflakes on silicon nanowires for high performance micro-supercapacitors in Li- doped ionic liquid.

Building of hierarchical core-shell hetero-structures is currently the subject of intensive research in the electrochemical field owing to its potential for making improved electrodes for high-performance micro-supercapacitors. Here we report a novel architecture design of hierarchical MnO2@silicon nanowires (MnO2@SiNWs) hetero-structures directly supported onto silicon wafer coupled with Li-ion doped 1-Methyl-1-propylpyrrolidinium bis(trifluromethylsulfonyl)imide (PMPyrrBTA) ionic liquids as electrolyte for micro-supercapacitors. A unique 3D mesoporous MnO2@SiNWs in Li-ion doped IL electrolyte can be cycled reversibly across a voltage of 2.2 V and exhibits a high areal capacitance of 13 mFcm(-2). The high conductivity of the SiNWs arrays combined with the large surface area of ultrathin MnO2 nanoflakes are responsible for the remarkable performance of these MnO2@SiNWs hetero-structures which exhibit high energy density and excellent cycling stability. This combination of hybrid electrode and hybrid electrolyte opens up a novel avenue to design electrode materials for high-performance micro-supercapacitors.

LiTFSI in 1-butyl-1-methylpyrrolidinium bis(fluorosulfonyl)amide: a possible electrolyte for ionic liquid based lithium ion batteries.

In this communication, we show that the combination of 1 M lithium bis(trifluoromethylsulfonyl)amide and 1-butyl-1-methylpyrrolidinium bis(fluorosulfonyl)amide (LiTFSI/[Py1,4]FSI) can be regarded as a possible stable electrolyte for IL based lithium ion batteries. We compare the charge-discharge results with the electrolyte 1 M LiTFSI in 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([Py1,4]TFSI) on an electrodeposited Ge electrode and show using a charge-discharge analysis and Raman spectroscopy that 1 M LiTFSI/[Py1,4]FSI is advantageous in maintaining the charge capacity as well as electrolyte stability at high current densities.

Importance of dispersion forces for prediction of thermodynamic and transport properties of some common ionic liquids.

An extensive study of interaction energies in ion pairs of pyrrolidinium and imidazolium ionic liquids is presented. The Cnmpyr and Cnmim cations with varying alkyl chains from Methyl, Ethyl, n-Propyl to n-Butyl were combined with a wide range of routinely used IL anions such as chloride, bromide, mesylate (CH3SO3 or Mes), tosylate (CH3PhSO3 or Tos), bis(trifluoromethanesulfonyl)amide (NTf2), dicyanamide (N(CN)2 or dca), tetrafluoroborate (BF4) and hexafluorophosphate (PF6). A number of energetically favourable conformations were studied for each cation-anion combination. The interaction energy and its dispersion component of the single ion pairs were calculated using a sophisticated state-of-the-art approach: a second-order of Symmetry Adapted Perturbation Theory (SAPT). A comparison of energetics depending on the cation-anion type, as well as the mode of interaction was performed. Dispersion forces were confirmed to be of importance for the overall stabilisation of ionic liquids contributing from 28 kJ mol(-1) in pyrrolidinium ion pairs to 59 kJ mol(-1) in imidazolium ion pairs. The previously proposed ratio of total interaction energy to dispersion components and melting points was assessed for this set of ionic liquids and was found to correlate with their melting points for the anionic series, producing separate trends for the Cnmim and Cmpyr series of cations. Chlorides, bromides and tetrafluoroborates formed close-to-ideal correlations when both types of cations, Cnmim and Cnmpyr, were combined in the same trend. Correlation of the dispersion component of the interaction energy with transport properties such as conductivity and viscosity was also considered. For imidazolium-based ionic liquids strong linear correlations were obtained, whereas pyrrolidinium ionic liquids appeared to be insensitive to this correlation.

Enhanced CO2 capture in binary mixtures of 1-alkyl-3-methylimidazolium tricyanomethanide ionic liquids with water.

Absorption of carbon dioxide and water in 1-butyl-3-methylimidazoliun tricyanomethanide ([C4C1im][TCM]) and 1-octyl-3-methylimidazolium tricyanomethanide ([C8C1im][TCM]) ionic liquids (ILs) was systematically investigated for the first time as a function of the H2O content by means of a gravimetric system together with in-situ Raman spectroscopy, excess molar volume (V(E)), and viscosity deviation measurements. Although CO2 absorption was marginally affected by water at low H2O molar fractions for both ILs, an increase of the H2O content resulted in a marked enhancement of both the CO2 solubility (ca. 4-fold) and diffusivity (ca. 10-fold) in the binary [C(n)C1im][TCM]/H2O systems, in contrast to the weak and/or detrimental influence of water in most physically and chemically CO2-absorbing ILs. In-situ Raman spectroscopy on the IL/CO2 systems verified that CO2 is physically absorbed in the dry ILs with no significant effect on their structural organization. A pronounced variation of distinct tricyanomethanide Raman modes was disclosed in the [C(n)C1im][TCM]/H2O mixtures, attesting to the gradual disruption of the anion-cation coupling by the hydrogen-bonded water molecules to the [TCM](-) anions, in accordance with the positive excess molar volumes and negative viscosity deviations for the binary systems. Most importantly, CO2 absorption in the ILs/H2O mixtures at high water concentrations revealed that the [TCM](-) Raman modes tend to restore their original state for the heavily hydrated ILs, in qualitative agreement with the intriguing nonmonotonous transients of CO2 absorption kinetics unveiled by the gravimetric measurements for the hybrid solvents. A molecular exchange mechanism between CO2 in the gas phase and H2O in the liquid phase was thereby proposed to explain the enhanced CO2 absorption in the hybrid [C(n)C1im][TCM]//H2O solvents based on the subtle competition between the TCM-H2O and TCM-CO2 interactions, which renders these ILs very promising for CO2 separation applications.

Temperature dependence of the viscosity and conductivity of mildly functionalized and non-functionalized [Tf2N](-) ionic liquids.

A series of bis(trifluoromethylsulfonyl)imide ionic liquids (ILs) with classical as well as mildly functionalized cations was prepared and their viscosities and conductivities were determined as a function of the temperature. Both were analyzed with respect to Arrhenius, Litovitz and Vogel-Fulcher-Tammann (VFT) behaviors, as well as in the context of their molecular volume (V(m)). Their viscosity and conductivity are highly correlated with V(m)/T or related expressions (R(2) ≥0.94). With the knowledge of V(m) of new cations, these correlations allow the temperature-dependent prediction of the viscosity and conductivity of hitherto unknown, non- or mildly functionalized ILs with low error bars (0.05 and 0.04 log units, respectively). The influence of the cation structure and mild functionalization on the physical properties was studied with systematically altered cations, in which V(m) remained similar. The T(o) parameter obtained from the VFT fits was compared to the experimental glass temperature (T(g)) and the T(g)/T(o) ratio for each IL was calculated using both experimental values and Angell's relationship. With Walden plots we investigated the IL ionicity and interpreted it in relation to the cation effects on the physical IL properties. We checked the validity of these V(m)/T relations by also including the recently published variable temperature viscosity and conductivity data of the [Al(OR(F))(4)](-) ILs with R(F) =C(H)(CF(3))(2) (error bars for the prediction: 0.09 and 0.10 log units, respectively).

Hydrogenation without a transition-metal catalyst: on the mechanism of the base-catalyzed hydrogenation of ketones.

The hydrogenation of unsaturated organic substrates such as olefins and ketones is usually effected by homogeneous or heterogeneous transition-metal catalysts. On the other hand, a single case of a transition-metal-free and purely base-catalyzed hydrogenation of ketones was reported by Walling and Bollyky some 40 years ago. Unfortunately, the harsh reaction conditions (ca. 200 degrees C, >100 bar H(2), potassium tert-butoxide as base) limit the substrate spectrum of this reaction to robust, nonenolizable ketones such as benzophenone. We herein present a mechanistic study of this process as a basis for future rational improvement. The base-catalyzed hydrogenation of ketones was found to be irreversible, and it shows first-order kinetics with respect to the substrate ketone, hydrogen, and catalytic base. The rate of the reaction depends on the type of alkali ion present (Cs > Rb - K >> Na >> Li). Using D(2) instead of H(2) revealed a rapid base-catalyzed isotope exchange/equilibration between the gas phase and the solvent as a concomitant reaction. The degree of deuteration of the product alcohols did not indicate a significant kinetic isotope effect. It is proposed that both ketone reduction and isotope exchange proceed via similar six-membered cyclic transition states involving the H(2)(D(2))-molecule, the alkoxide base, and the ketone (solvent alcohol in the case of isotope exchange). Mechanistic analogies are pointed out which apparently exist between the base-catalyzed hydrogenation of ketones studied here and the Ru-catalyzed asymmetric ketone hydrogenation developed by Noyori. In both cases, heterolysis of the hydrogen molecule appears to be assisted by a Brønsted-base (i.e., alkoxide), the latter being bound to the substrate ketone or the catalyst ligand, respectively, by a bridging Lewis-acidic alkali ion.