Multibarrier-penetrating drug delivery systems for deep tumor therapy based on synergistic penetration strategy.

Nanotherapies, valued for their high efficacy and low toxicity, frequently serve as antitumor treatments, but do not readily penetrate deep into tumor tissues and cells. Here we developed an improved tumor-penetrating peptide (TPP)-based drug delivery system. Briefly, the established TPP iNGR was modified to generate a linear NGR peptide capable of transporting nanotherapeutic drugs into tumors through a CendR pathway-dependent, neuropilin-1 receptor-mediated process. Although TPPs have been reported to reach intended tumor targets, they often fail to penetrate cell membranes to deliver tumoricidal drugs to intracellular targets. We addressed this issue by harnessing cell penetrating peptide technology to develop a liposome-based multibarrier-penetrating delivery system (mbPDS) with improved synergistic drug penetration into deep tumor tissues and cells. The system incorporated doxorubicin-loaded liposomes coated with nona-arginine (R9) CPP and cyclic iNGR (CRNGRGPDC) molecules, yielding Lip-mbPDS. Lip-mbPDS tumor-targeting, tumor cell/tissue-penetrating and antitumor capabilities were assessed using CD13-positive human fibrosarcoma-derived cell (HT1080)-based in vitro and in vivo tumor models. Lip-mbPDS evaluation included three-dimensional layer-by-layer confocal laser scanning microscopy, cell internalization/toxicity assays, three-dimensional tumor spheroid-based penetration assays and antitumor efficacy assays conducted in an animal model. Lip-mbPDS provided enhanced synergistic drug penetration of multiple biointerfaces for potentially deep tumor therapeutic outcomes.

Mechanistic evaluation of the initial burst release of leuprolide from spray-dried PLGA microspheres.

Spray-dried poly(lactic-co-glycolic acid) (PLGA) peptide-loaded microspheres have demonstrated similar long-term in vitro release kinetics compared to those produced by the solvent evaporation method and commercial products. However, the difficult-to-control initial burst release over the first 24 h after administration presents an obstacle to product development and establishing bioequivalence. Currently, detailed information about underlying mechanisms of the initial burst release from microspheres is limited. We investigated the mechanism and extent of initial burst release using 16 previously developed spray-dried microsphere formulations of the hormone drug, leuprolide acetate, with similar composition to the commercial 1-month Lupron Depot® (LD). The burst release kinetics was measured with a previously validated continuous monitoring system as well as traditional sample-and-separate methods. The changes in pore structure and polymer permeability were investigated by SEM imaging and the uptake of a bodipy-dextran probe. In vitro results were compared to pharmacokinetics in rats over the same interval. High-burst, spray-dried microspheres were differentiated in the well-mixed continuous monitoring system but reached an upper limit when measured by the sample-and-separate method. Pore-like occlusions observed by confocal microscopy in some formulations indicated that particle swelling may have contributed to probe diffusion through the polymer phase and showed the extensive internal pore structure of spray-dried particles. Continuous monitoring revealed a rapid primary (1°) phase followed by a constant-rate secondary (2°) release phase, which comprised ∼80% and 20% of the 24-hr release, respectively. The ratio of 1° phase duration (t1°) and the characteristic probe diffusion time (τ) was highly correlated to 1° phase release for spray dried particles. Of the four spray-dried formulations administered in vivo, three spray-dried microspheres with similar polymer density showed nearly ideal linear correlation between in vivo absorption and well-mixed in vitro release kinetics over the first 24 h. By contrast, the more structurally dense LD and a more-dense in-house formulation showed a slight lag phase in vivo relative to in vitro. Furthermore, in vitro dimensionless times (tburst/τ) were highly correlated with pharmacokinetic parameters for spray-dried microspheres but not for LD. While the correlation of increases in effective probe diffusion and 1° phase release strongly suggests diffusion through the polymer matrix as a major release mechanism both in vitro and in vivo, a fixed lower limit for this release fraction implies an alternative release mechanism. Overall, continuous monitoring release and probe diffusion appears to have potential in differentiating between leuprolide formulations and establishing relationships between in vitro release and in vivo absorption during the initial burst period.

Influence of encapsulation variables on formation of leuprolide-loaded PLGA microspheres.

Emulsion-based solvent evaporation microencapsulation methods for producing PLGA microspheres are complex often leading to empirical optimization. This study aimed to develop a more detailed understanding of the effects of process variables on the complex emulsification processes during encapsulation of leuprolide in PLGA microspheres using a high-shear rotor-stator mixer. Following extensive analysis of previously developed formulation conditions that yield microspheres of equivalent composition to the commercial 1-month Lupron Depot, multiple variables during the formation of primary and secondary emulsion were investigated with the aid of dimensional analysis, including: rotor speed (ω) and time (t), dispersed phase fraction (Φ) and continuous phase viscosity (µc). The dimensionless Sauter mean diameter (d3,2) of primary emulsion was observed to be proportional to the product of several key dimensionless groups (Φ1,We,Re,ω1t1) raised to the appropriate power indices. A new dimensionless group (Θ ) (surface energy/energy input) was used to rationalize insertion of a proportionate time dependence in the scaling of the d3,2. The dimensionless d3,2 of secondary emulsion was found proportional to the product of three dimensionless groups ( [Formula: see text] ) raised to the appropriate power indices. The increased viscosity of the primary emulsion, decreased secondary water phase volume and reduced second homogenization time each elevated encapsulation efficiency of peptide by reducing drug leakage to the outer water phase. These results could be useful for dimensional analysis and improving manufacturing of PLGA microspheres by the solvent evaporation method.

"Felodipine-indomethacin" co-amorphous supersaturating drug delivery systems: "Spring-parachute" process, stability, in vivo bioavailability, and underlying molecular mechanisms.

Amorphous solid dispersions (ASD) are one of most commonly used supersaturating drug delivery systems (SDDS) to formulate insoluble active pharmaceutical ingredients. However, the development of polymer-guided stabilization of ASD systems faces many obstacles. To overcome these shortcomings, co-amorphous supersaturable formulations have emerged as an alternative formulation strategy for poorly soluble compounds. Noteworthily, current researches around co-amorphous system (CAS) are mostly focused on preparation and characterization of these systems, but more detailed investigations of their supersaturation ("spring-parachute" process), stability, in vivo bioavailability and molecular mechanisms are inadequate and need to be clarified. In present study, we chose pharmacological relevant BCS II drugs to fabricate and characterize "felodipine-indomethacin" CAS. To enrich the current inadequate but key knowledge on CAS studies, we carried out following highlighted investigations including dissolution/solubility, semi-continuous "spring-parachute" process, long-term stability profile of amorphous state, in vivo bioavailability and underlying molecular mechanisms (molecular interaction, molecular miscibility and crystallization inhibition). Generally, the research provides some key information in the field of current "drug-drug" CAS supersaturable formulations.

Microencapsulation of luteinizing hormone-releasing hormone agonist in poly (lactic-co-glycolic acid) microspheres by spray-drying.

A spray drying technique was developed to prepare injectable and biodegradable poly(lactic-co-glycolic acid) (PLGA) microspheres encapsulating a model luteinizing hormone-releasing hormone agonist (LHRHa)-based peptide, leuprolide. Various spray drying parameters were evaluated to prepare 1-month controlled release formulations with a similar composition to the commercial Lupron Depot® (LD). A single water-in-oil emulsion of aqueous leuprolide/gelatin solution in PLGA 75/25 acid capped (13 kDa Mw) dissolved in methylene chloride (DCM) was spray-dried before washing the microspheres in cold ddH2O and freeze-drying. The spray-drying microencapsulation was characterized by: particle size/distribution (span), morphology, drug/gelatin loading, encapsulation efficiency, and residual DCM and water content. Long-term release was tested over 9 weeks in PBS + 0.02% Tween 80 + 0.02% sodium azide pH 7.4 (PBST) at 37 °C. Several physical-chemical parameters were monitored simultaneously for selected formulations, including: water uptake, mass loss, dry and hydrated glass transition temperature, to help understand the related long-term release profiles and explore the underlying controlled-release mechanisms. Compared with the commercial LD microspheres, some of the in-house spray-dried microspheres presented highly similar or even improved long-term release profiles, providing viable long-acting release (LAR) alternatives to the LD. The in vitro release mechanism of the peptide was shown to be controlled either by kinetics of polymer mass loss or by a second process, hypothesized to involve peptide desorption from the polymer. These data indicate spray drying can be optimized to prepare commercially relevant PLGA microsphere formulations for delivery of peptides, including the LHRHa, leuprolide.

Hot melt extrusion technology for improved dissolution, solubility and "spring-parachute" processes of amorphous self-micellizing solid dispersions containing BCS II drugs indomethacin and fenofibrate: Profiles and mechanisms.

Many strategies have been employed to improve oral drug delivery. One such approach involves the use of supersaturable delivery systems such as amorphous self-micellizing solid dispersions (SmSDs). SmSDs have attracted more attention recently, but little is known regarding the impact of production methods on profiles and internal mechanisms of final SmSDs in spite of its importance. In this study, amorphous SmSDs containing self-micellizing Soluplus® and BCS II drug (either indomethacin (IND) or fenofibrate (FEN)) were generated using various methods: solvent evaporation (SOL), freeze-drying (FD), microwave radiation-quench cooling (MQC), and hot melt extrusion (HME). Microscopic morphology, amorphous state, thermal behavior, dissolution/solubility, and "spring-parachute" data were used to assemble physicochemical profiles for SmSD systems prepared using each method. Analysis of intermolecular interactions, solubilization, and crystallization inhibition further uncovered internal mechanisms explaining observed physicochemical properties. Generally, SmSD/IND and SmSD/FEN systems generated using HME exhibited superior dissolution, solubility, and spring-parachute profiles. The superior advantages of HME-generated SmSD/IND systems were attributed to relatively stronger intermolecular interactions than observed in SmSD/IND systems fabricated using other methods. Moreover, self-micellizing Soluplus® carrier was able to solubilize IND or FEN and suppress drug crystallization from a supersaturated state, which seemed to be an important mechanism for the properties enhancement caused by SmSD/FENHME. This knowledge should be useful for guiding further development of self-micellizing solid dispersions and for gaining deeper understanding of how HME technology can improve supersaturable drug delivery based on SmSDs strategy.

The Influence of Cellulosic Polymer's Variables on Dissolution/Solubility of Amorphous Felodipine and Crystallization Inhibition from a Supersaturated State.

The collective impact of cellulosic polymers on the dissolution, solubility, and crystallization inhibition of amorphous active pharmaceutical ingredients (APIs) is still far from being adequately understood. The goal of this research was to explore the influence of cellulosic polymers and incubation conditions on enhancement of solubility and dissolution of amorphous felodipine, while inhibiting crystallization of the drug from a supersaturated state. Variables, including cellulosic polymer type, amount, ionic strength, and viscosity, were evaluated for effects on API dissolution/solubility and crystallization processes. Water-soluble cellulosic polymers, including HPMC E15, HPMC E5, HPMC K100-LV, L-HPC, and MC, were studied. All cellulosic polymers could extend API dissolution and solubility to various extents by delaying crystallization and prolonging supersaturation duration, with their effectiveness ranked from greatest to least as HPMC E15 > HPMC E5 > HPMC K100-LV > L-HPC > MC. Decreased polymer amount, lower ionic strength, or higher polymer viscosity tended to decrease dissolution/solubility and promote crystal growth to accelerate crystallization. HPMC E15 achieved greatest extended API dissolution and maintenance of supersaturation from a supersaturated state; this polymer thus had the greatest potential for maintaining sustainable API absorption within biologically relevant time frames.

Deepened cellular/subcellular interface penetration and enhanced antitumor efficacy of cyclic peptidic ligand-decorated accelerating active targeted nanomedicines.

INTRODUCTION: Acceleration and improvement of penetration across cell-membrane interfaces of active targeted nanotherapeutics into tumor cells would improve tumor-therapy efficacy by overcoming the issue of poor drug penetration. Cell-penetrating peptides, especially synthetic polyarginine, have shown promise in facilitating cargo delivery. However, it is unknown whether polyarginine can work to overcome the membrane interface in an inserted pattern for cyclic peptide ligand-mediated active targeting drug delivery. Here, we conducted a study to test the hypothesis that tandem-insert nona-arginine (tiR9) can act as an accelerating component for intracellular internalization, enhance cellular penetration, and promote antitumor efficacy of active targeted cyclic asparagine-glycine-arginine (cNGR)-decorated nanoliposomes. METHODS: Polyarginine was coupled with the polyethylene glycol (PEG) chain and the cNGR moiety, yielding a cNGR-tiR9-PEG2,000-distearoylphosphatidylethanolamine conjugate. RESULTS: The accelerating active targeted liposome (Lip) nanocarrier (cNGR-tiR9-Lip-doxorubicin [Dox]) constructed in this study held suitable physiochemical features, such as appropriate particle size of ~150 nm and sustained-release profiles. Subsequently, tiR9 was shown to enhance cellular drug delivery of Dox-loaded active targeted systems (cNGR-Lip-Dox) significantly. Layer-by-layer confocal microscopy indicated that the tandem-insert polyarginine accelerated active targeted system entry into deeper intracellular regions based on observations at marginal and center locations. tiR9 enhanced the penetration depth of cNGR-Lip-coumarin 6 through subcellular membrane barriers and caused its specific accumulation in mitochondria, endoplasmic reticulum, and Golgi apparatus. It was also obvious that cNGR-tiR9-Lip-Dox induced enhanced apoptosis and activated caspase 3/7. Moreover, compared with cNGR-Lip-Dox, cNGR-tiR9-Lip-Dox induced a significantly higher antiproliferative effect and markedly suppressed tumor growth in HT1080-bearing nude mice. CONCLUSION: This active tumor-targeting nanocarrier incorporating a tandem-insert polyarginine (tiR9) as an accelerating motif shows promise as an effective drug-delivery system to accelerate translocation of drugs across tumor-cell/subcellular membrane barriers to achieve improved specific tumor therapy.

On the inherent properties of Soluplus and its application in ibuprofen solid dispersions generated by microwave-quench cooling technology.

Polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer, or Soluplus®, is a relatively new copolymer and a promising carrier of amorphous solid dispersions. Knowledge on the inherent properties of Soluplus® (e.g. cloud points, critical micelle concentrations, and viscosity) in different conditions is relatively inadequate, and the application characteristics of Soluplus®-based solid dispersions made by microwave methods still need to be clarified. In the present investigation, the inherent properties of a Soluplus® carrier, including cloud points, critical micelle concentrations, and viscosity, were explored in different media and in altered conditions. Ibuprofen, a BCS class II non-steroidal anti-inflammatory drug, was selected to develop Soluplus®-based amorphous solid dispersions using the microwave-quench cooling (MQC) method. Scanning electronic microscopy (SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Raman spectroscopy (RS), and Fourier transform infrared spectroscopy (FT-IR) were adopted to analyze amorphous properties and molecular interactions in ibuprofen/Soluplus® amorphous solid dispersions generated by MQC. Dissolution, dissolution extension, phase solubility, equilibrium solubility, and supersaturated crystallization inhibiting experiments were performed to elucidate the effects of Soluplus® on ibuprofen in solid dispersions. This research provides valuable information on the inherent properties of Soluplus® and presents a basic understanding of Soluplus® as a carrier of amorphous solid dispersions.

Intelligent "Peptide-Gathering Mechanical Arm" Tames Wild "Trojan-Horse" Peptides for the Controlled Delivery of Cancer Nanotherapeutics.

Cell-penetrating peptides (CPPs), also called "Trojan-Horse" peptides, have been used for facilitating intracellular delivery of numerous diverse cargoes and even nanocarriers. However, the lack of targeting specificity ("wildness" or nonselectivity) of CPP-nanocarriers remains an intractable challenge for many in vivo applications. In this work, we used an intelligent "peptide-gathering mechanical arm" (Int PMA) to curb CPPs' wildness and enhance the selectivity of R9-liposome-based cargo delivery for tumor targeting. The peptide NGR, serving as a cell-targeting peptide for anchoring, and peptide PLGLAG, serving as a substrate peptide for deanchoring, were embedded in the Int PMA motif. The Int PMA construct was designed to be sensitive to tumor microenvironmental stimuli, including aminopeptidase N (CD13) and matrix metalloproteinases (MMP-2/9). Moreover, Int PMA could be specifically recognized by tumor tissues via CD13-mediated anchoring and released for cell entry by MMP-2/9-mediated deanchoring. To test the Int PMA design, a series of experiments were conducted in vitro and in vivo. Functional conjugates Int PMA-R9-poly(ethylene glycol) (PEG)2000-distearoylphosphatidyl-ethanolamine (DSPE) and R9-PEG2000-DSPE were synthesized by Michael addition reaction and were characterized by thin-layer chromatography and matrix-assisted laser desorption ionization-time-of-flight mass spectrometry. The Int PMA-R9-modified doxorubicin-loaded liposomes (Int PMA-R9-Lip-DOX) exhibited a proper particle diameter (approximately 155 nm) with in vitro sustained release characteristics. Cleavage assay showed that Int PMA-R9 peptide molecules could be cleaved by MMP-2/9 for completion of deanchoring. Flow cytometry and confocal microscopy studies indicated that Int PMA-R9-Lip-DOX can respond to both endogenous and exogenous stimuli in the presence/absence of excess MMP-2/9 and MMP-2/9 inhibitor (GM6001) and effectively function under competitive receptor-binding conditions. Moreover, Int PMA-R9-Lip-DOX generated more significant subcellular dispersions that were especially evident within endoplasmic reticulum (ER) and Golgi apparatus. Notably, Int PMA-R9-Lip-DOX could induce enhanced apoptosis, during which caspase 3/7 might be activated. In addition, Int PMA-R9-Lip-DOX displayed enhanced in vitro and in vivo antitumor efficacy versus "wild" R9-Lip-DOX. On the basis of investigations at the molecular level, cellular level, and animals' level, the control of Int PMA was effective and promoted selective delivery of R9-liposome cargo to the target site and reduced nonspecific uptake. This Int PMA-controlled strategy based on aminopeptidase-guided anchoring and protease-triggered deanchoring effectively curbed the wildness of CPPs and bolstered their effectiveness for in vivo delivery of nanotherapeutics. The specific nanocarrier delivery system used here could be adapted using a variety of intelligent designs based on combinations of multifunctional peptides that would specifically and preferentially bind to tumors versus nontumor tissues for tumor-localized accumulation in vivo. Thus, CPPs have a strong advantage for the development of intelligent nanomedicines for targeted tumor therapy.

Self-micellizing solid dispersions enhance the properties and therapeutic potential of fenofibrate: Advantages, profiles and mechanisms.

The goal of this work was to compare fenofibrate (FEN)-containing self-micellizing solid dispersion (SmSD) and non-self-micellizing solid dispersion (NsSD) systems. Exploration of underlying mechanisms to improve FEN dissolution/solubility profiles was conducted to understand the enhanced therapeutic potential. SmSD and NsSD of FEN systems (SmSD/FEN and NsSD/FEN) were fabricated using a fuse-quench cooling method. The self-micellizing Soluplus® cloud point was then determined experimentally and FEN phase solubility was measured in solutions containing self-micellizing Soluplus® or non-self-micellizing polymers. Physicochemical characteristics of SmSD/FEN and NsSD/FEN were evaluated using microscopic morphology, amorphous state, thermal performance, dissolution and solubility profiles. FEN exhibited an amorphous state in SmSD/FEN but was not completely amorphous in NsSD/FEN. The dissolution and solubility profile of SmSD/FEN achieved about 1.2- to 2-fold improvement over that of NsSD/FEN. Consequently, relatively enhanced hypolipidemic efficacy in vivo was observed in SmSD/FEN vs NsSD/FEN, as measured by serum levels of total cholesterol (TC), total triglycerides (TG), low-density lipoprotein (LDL) and high-density lipoprotein (HDL). Compared with non-self-micellizing polymers, self-micellizing Soluplus® significantly inhibited FEN crystal growth from a supersaturated state. However, no obvious difference in intermolecular interactions was observed between SmSD/FEN and NsSD/FEN systems. Overall, the SmSD approach exhibited as trengthened dissolution effect, enhancing FEN hyperlipidemic disease therapy efficacy.

Taming the Wildness of "Trojan-Horse" Peptides by Charge-Guided Masking and Protease-Triggered Demasking for the Controlled Delivery of Antitumor Agents.

Cell-penetrating peptide (CPP), also called "Trojan Horse" peptide, has become a successful approach to deliver various payloads into cells for achieving the intracellular access. However, the "Trojan Horse" peptide is too wild, not just to "Troy", but rather widely distributed in the body. Thus, there is an urgent need to tame the wildness of "Trojan Horse" peptide for targeted delivery of antineoplastic agents to the tumor site. To achieve this goal, we exploit a masked CPP-doxorubicin conjugate platform for targeted delivery of chemotherapeutic drugs using charge-guided masking and protease-triggered demasking strategies. In this platform, the cell-penetrating function of the positively CPP (d-form nonaarginine) is abrogated by a negatively shielding peptide (masked CPP), and between them is a cleavable substrate peptide by the protease (MMP-2/9). Protease-triggered demasking would occur when the masked CPP reached the MMP-2/9-riched tumor. The CPP-doxorubicin conjugate (CPP-Dox) and the masked CPP-Dox conjugate (mCPP-Dox) were used as models for the evaluation of masking and demasking processes. It was found that exogenous MMP-2/9 could effectively trigger the reversion of CPP-cargo in this conjugate, and this trigger adhered to the Michaelis-Menten kinetics profile. This conjugate was sensitive to the trigger of endogenous MMP-2/9 and could induce enhanced cytotoxicity toward MMP-2/9-rich tumor cells. In vivo antitumor efficacy revealed that this masked conjugate had considerable antitumor activity and could inhibit the tumor growth at a higher level relative to CPP-cargo. Low toxicity in vivo showed the noticeably decreased wildness of this conjugate toward normal tissues and more controllable entry of antitumor agents into "Troy". On the basis of analyses in vitro and in vivo, this mCPP-cargo conjugate delivery system held an improved selectivity toward MMP-2/9-rich tumors and would be a promising strategy for tumor-targeted treatment.

[Rules and characteristics of crystallization inhibition of cellulose polymers against drugs in supersaturated states].

This study aims to explore the characteristics of crystallization inhibition by cellulose polymers at the supersaturated states of drugs. The study was performed by simulating supersaturated process and preparing supersaturated drug solid, and was carried out by measuring the content of drugs at different time points using dissolution apparatus. The types, amounts, ionic intensity and viscosity of cellulose polymers were examined to assess the crystallization inhibition effect on BCS II class drug indomethacin. HPMC E15 exhibited the strongest crystallization inhibition effect. The more added, more obvious crystallization suppression was observed against indomethacin. The decrease in viscosity and increase in ionic intensity led to an enhanced inhibition. The research provides a scientific guide for the crystallization inhibition of supersaturated drug by cellulose polymers.

Deoxycholic acid-grafted PEGylated chitosan micelles for the delivery of mitomycin C.

Mitomycin C (MTC) was incorporated to a micelle system preparing from a polymer named deoxycholic acid chitosan-grafted poly(ethylene glycol) methyl ether (mPEG-CS-DA). mPEG-CS-DA was synthesized and characterized by (1)H nuclear magnetic resonance ((1)H-NMR) and Fourier transform infrared spectroscopy. mPEG-CS-DA formed a core-shell micellar structure with a critical micelle concentration of 6.57 µg/mL. The mPEG-CS-DA micelles were spherical with a hydrodynamic diameter of about 231 nm. After poly(ethylene glycol)ylation of deoxycholic acid chitosan (CS-DA), the encapsulation efficiency and drug loading efficiency increased from 50.62% to 56.42% and from 20.51% to 24.13%, respectively. The mPEG-CS-DA micelles possessed a higher drug release rate than the CS-DA micelles. For pharmacokinetics, the area under the curve (AUC) of the mPEG-CS-DA micelles was 1.5 times higher than that of MTC injection, and these micelles can enhance the bioavailability of MTC. mPEG-CS-DA micelles reduced the distribution of MTC in almost all normal tissues and had the potential to improve the kidney toxicity caused by MTC injection.

A survey on "Trojan Horse" peptides: opportunities, issues and controlled entry to "Troy".

Cell-penetrating peptides (CPPs), often vividly termed as the "Trojan Horse" peptides, have attracted considerable interest for the intracellular delivery of a wide range of cargoes, such as small molecules, peptides, proteins, nucleic acids, contrast agents, nanocarriers and so on. Some preclinical and clinical developments of CPP conjugates demonstrate their promise as therapeutic agents for drug discovery. There is increasing evidence to suggest that CPPs have the potential to cross several bio-barriers (e.g., blood-brain barriers, intestinal mucosa, nasal mucosa and skin barriers). Despite revolutionary process in many aspects, there are a lot of basic issues unclear for these entities, such as internalization mechanisms, translocation efficiency, translocation kinetics, metabolic degradation, toxicity, side effect, distribution and non-specificity. Among them, non-specificity remains a major drawback for the in vivo application of CPPs in the targeted delivery of cargoes. So far, diverse organelle-specific CPPs or controlled delivery strategies have emerged and improved their specificity. In this review, we will look at the opportunities of CPPs in clinical development, bio-barriers penetration and nanocarriers delivery. Then, a series of basic problems of CPPs will be discussed. Finally, this paper will highlight the use of various controlled strategies in the organelle-specific delivery and targeted delivery of CPPs. The purpose of this review will be to emphasize most influential advance in this field and present a fundamental understanding for challenges and utilizations of CPPs. This will accelerate their translation as efficient vectors from the in vitro setting into the clinic arena, and retrieve the entry art to "Troy".

[Application of microwave irradiation technology to the field of pharmaceutics].

Microwaves can be directly transformed into heat inside materials because of their ability of penetrating into any substance. The degree that materials are heated depends on their dielectric properties. Materials with high dielectric loss are more easily to reach a resonant state by microwaves field, then microwaves can be absorbed efficiently. Microwave irradiation technique with the unique heating mechanisms could induce drug-polymer interaction and change the properties of dissolution. Many benefits such as improving product quality, increasing energy efficiency and reducing times can be obtained by microwaves. This paper summarized characteristics of the microwave irradiation technique, new preparation techniques and formulation process in pharmaceutical industry by microwave irradiation technology. The microwave technology provides a new clue for heating and drying in the field of pharmaceutics.

Effect of polymers and media type on extending the dissolution of amorphous pioglitazone and inhibiting the recrystallization from a supersaturated state.

Amorphous forms of crystalline drug are widely utilized for bioavailability enhancement of low solubility drugs in the pharmaceutical industry. Polymers have been found to be effective crystallization inhibitors for amorphous forms in solid states during storage or in liquid states during dissolution process. The dissolution and crystallization behaviors of these amorphous forms in the presence or absence of polymers are still far from adequately understood especially in different dissolution environments. The objective of this study was to investigate the effects of polymers and media type on extending the dissolution of amorphous pioglitazone and inhibiting the recrystallization from a supersaturated state. Polyvinylpyrrolidone K30 (PVPK30), polyvinylpyrrolidone K90 (PVPK90), polyethylene glycol 6000 (PEG6000), polyethylene-polypropylene glycol 188 (F-68), hydroxypropylmethylcellulose (HPMC) and beta-cyclodextrin (ß-CD) were employed to understand these behaviors changes because these polymers were used widely. Three solutions including neutral water and phosphate buffer solutions (PBS, pH6.8 and pH7.4) were adopted as dissolution media to determine the behaviors changes comprehensively. In the presence of polymers, dissolution and solubility were extended to different degrees in three media. Polymers can delay the crystallization routes dependently of the medium type. Buffer salts in media reduced the dissolution and accelerated the crystallization process. Crystallization inhibition of these polymers was strongly dependent on the type and pH of media. HPMC displayed the strongest crystallization inhibition effects, resulting in the greatest degree of maintaining a supersaturated state that can sustain most effectively for biologically relevant timeframes.

[The development of co-amorphous drug systems].

Converting two poorly water-soluble crystalline drugs to co-amorphous drug systems by ball milling, quench-cooling, or cryo-milling method can improve stability of the drug, enhance dissolution rates, and reduce adverse reactions of the single drug. Co-amorphous system has been used to solve problems of co-administration of medicines. Formation and intermolecular interactions of co-amorphous drug systems may be verified by differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), Raman spectroscopy (RS) and Fourier transform infrared spectroscopy (FT-IR). Stability of co-amorphous drug systems is influenced by their glass transition temperature (Tg) and intermolecular interactions. The theoretical Tg values and the interaction parameter x are calculated by Gordon-Taylor equation and the Flory-Huggins equation, respectively. Thus, co-amorphous drug systems are analyzed theoretically at molecular level. Co-amorphous drug systems provide a new sight for the co-administration of medicines.

PSA-responsive and PSMA-mediated multifunctional liposomes for targeted therapy of prostate cancer.

In the hormone-refractory stage of prostate cancer (PC), the expression of prostate-specific antigen (PSA) and prostate-specific membrane antigen (PSMA) often remains highly active. Accumulating studies have demonstrated that these two proteins are attractive targets for specific delivery of functional molecules to advanced PC, not merely as potential sensitive markers for PC detection. In this study, we constructed a dual-modified liposome that incorporated PSA-responsive and PSMA-mediated liposomes and potentially offers double selectivity for PC. The folate moiety binds quickly to PSMA-positive tumors, and the PSA-responsive moiety is cleaved by PSA that was enriched in tumor tissues. The activated liposomes (folate and cell-penetrating peptides dual-modifications) are subsequently taken up by the tumor cells via polyarginine's penetrating effects and receptor-mediated endocytosis. To corroborate these assumptions, a series of experiments were conducted, including PSA-responsive peptide hydrolysis kinetics, cellular uptake, internalization mechanism and escape from endosomes in PC-3 and/or 22Rv1 cells, biodistribution and antitumor activity of siRNA-loaded liposomes after systemic administration, gene silencing and cell apoptosis in vitro and in vivo. The results reveal that multivalent interactions play a key role in enhancing PC cell recognition and uptake while reducing nonspecific uptake. The dual-modified liposomes carrying small interfering RNA (siRNA) have significant advantages over the control liposomes, including single-modified (folate, CPP, PSA-responsive only) and non-modified liposomes. The dual-modified liposomes elevated cellular uptake, downregulated expression of polo-like kinase 1 (PLK-1) and augmented cell apoptosis in prostate tumor cells. The entry of the dual-modified liposomes into 22Rv1 cells occurred via multiple endocytic pathways, including clathrin-mediated endocytosis and macropinocytosis, followed by an effective endosomal escape of the entrapped siRNA into the cytoplasm. In vivo studies conducted on a 22Rv1 xenograft murine model demonstrated that the dual-modified liposomes demonstrated the maximized accumulation, retention and knockdown of PLK-1 in tumor cells, as well as the strongest inhibition of tumor growth and induction of tumor cell apoptosis. In terms of targeting capacity and therapeutic potency, the combination of a PSA-responsive and PSMA-mediated liposome presents a promising platform for therapy and diagnosis of PSMA/PSA-positive PC.

Enhancing cellular uptake of activable cell-penetrating peptide-doxorubicin conjugate by enzymatic cleavage.

The use of activable cell-penetrating peptides (ACPPs) as molecular imaging probes is a promising new approach for the visualization of enzymes. The cell-penetrating function of a polycationic cell-penetrating peptide (CPP) is efficiently blocked by intramolecular electrostatic interactions with a polyanionic peptide. Proteolysis of a proteinase-sensitive substrate present between the CPP and polyanionic peptide affords dissociation of both domains and enables the activated CPP to enter cells. This ACPP strategy could also be used to modify antitumor agents for tumor-targeting therapy. Here, we aimed to develop a conjugate of ACPP with antitumor drug doxorubicin (DOX) sensitive to matrix metalloproteinase-2 and -9 (MMP-2/9) for tumor-targeting therapy purposes. The ACPP-DOX conjugate was successfully synthesized. Enzymatic cleavage of ACPP-DOX conjugate by matrix metalloproteinase (MMP)-2/9 indicated that the activation of ACPP-DOX occurred in an enzyme concentration-dependent manner. Flow cytometry and laser confocal microscope studies revealed that the cellular uptake of ACPP-DOX was enhanced after enzymatic-triggered activation and was higher in HT-1080 cells (overexpressed MMPs) than in MCF-7 cells (under-expressed MMPs). The antiproliferative assay showed that ACPP had little toxicity and that ACPP-DOX effectively inhibited HT-1080 cell proliferation. These experiments revealed that the ACPP-DOX conjugate could be triggered by MMP-2/9, which enabled the activated CPP-DOX to enter cells. ACPP-DOX conjugate may be a potential prodrug delivery system used to carry antitumor drugs for MMP-related tumor therapy.