Resorcinol-formaldehyde semiconducting resins as precursors for carbon spheres toward electrocatalytic oxygen reduction.

The carbon spheres synthesized by pyrolysis of resorcinol-formaldehyde (RF) semiconducting resins exhibit enhanced activity for electrocatalytic oxygen reduction. The spheres consist of narrow reticulated carbon layers, which are derived from the donor-acceptor π-stacking interaction of the resins, and show high electron conductivity.

Isomerization, Protonation, and Hydrolysis Properties of Naphthalimide-Containing Spiropyran in Aqueous Media.

Synthesis of spiropyrans exhibiting ring-opening/closing isomerization driven by external stimuli is a challenging subject for the development of molecular sensors. A napthalimide-containing spiropyran (1) promotes rapid isomerization between the spirocyclic (SP) form and ring-opened merocyanine (MC) form by the change in solvent polarity even under the dark condition at room temperature. In this work, the effect of water on the isomerization behavior of 1 was studied. The addition of water caused an MC-water H-bonding interaction and shifted the resonance MC structure to the zwitterionic form with a lower ground-state energy. The stabilized MC form promoted spontaneous SP → MC isomerization and increased the equilibrium MC concentration. The effect of pH on the behavior of 1 was also studied. In acidic-neutral media, protonation/deprotonation of the naphthalimide moiety led to rapid and reversible changes in the absorption spectra. In contrast, strongly basic media (pH > 12) promoted irreversible base-catalyzed hydrolysis of the alkene moiety.

Sunlight-Driven Nitrate-to-Ammonia Reduction with Water by Iron Oxyhydroxide Photocatalysts.

The photocatalytic reduction of harmful nitrates (NO3-) in strongly acidic wastewater to ammonia (NH3) under sunlight is crucial for the recycling of limited nitrogen resources. This study reports that a naturally occurring Cl--containing iron oxyhydroxide (akaganeite) powder with surface oxygen vacancies (ß-FeOOH(Cl)-OVs) facilitates this transformation. Ultraviolet light irradiation of the catalyst suspended in a Cl--containing solution promoted quantitative NO3--to-NH3 reduction with water under ambient conditions. The photogenerated conduction band electrons promoted the reduction of NO3--to-NH3 over the OVs. The valence band holes promoted self-oxidation of Cl- as the direct electron donor and eliminated Cl- was compensated from the solution. Photodecomposition of the generated hypochlorous acid (HClO) produced O2, facilitating catalytic reduction of NO3--to-NH3 with water as the electron donor in the entire system. Simulated sunlight irradiation of the catalyst in a strongly acidic nitric acid (HNO3) solution (pH ∼ 1) containing Cl- stably generated NH3 with a solar-to-chemical conversion efficiency of ∼0.025%. This strategy paves the way for sustainable NH3 production from wastewater.

[A New Preoperative Simulation Using Magnetic Resonance Imaging Bone-Like Imaging with Zero-Echo-Time Sequence].

This study aimed to evaluate the clinical usefulness of zero-echo time(ZTE)-based magnetic resonance imaging(MRI)in planning an optimal surgical approach and applying ZTE for anatomical guidance during transcranial surgery. P atients who underwent transcranial surgery and carotid endarterectomy and for whom ZTE-based MRI and magnetic resonance angiography(MRA)data were obtained, were analyzed by creating ZTE/MRA fusion images and 3D-ZTE-based MRI models. We examined whether these images and models could be substituted for computed tomography imaging during neurosurgical procedures. Furthermore, the clinical usability of the 3D-ZTE-based MRI model was evaluated by comparing it with actual surgical views. ZTE/MRA fusion images and 3D-ZTE-based MRI models clearly illustrated the cranial and intracranial morphology without radiation exposure or the use of an iodinated contrast medium. The models allowed the determination of the optimum surgical approach for cerebral aneurysms, brain tumors near the brain surface, and cervical internal carotid artery stenosis by visualizing the relationship between the lesions and adjacent bone structures. However, ZTE-based MRI did not provide useful information for surgery for skull base lesions, such as vestibular schwannoma, because bone structures of the skull base often include air components, which cause signal disturbances in MRI. ZTE sequences on MRI allowed distinct visualization of not only the bone but also the vital structures around the lesion. This technology is minimally invasive and useful for preoperative planning and guidance of the optimum approach during surgery in a subset of neurosurgical diseases.

Role of amide proton transfer imaging in maximizing tumor resection in malignant glioma: a possibility to take the place of 11C-methionine positron emission tomography.

BACKGROUND: Amide proton transfer (APT) imaging has been proposed as a technique to assess tumor metabolism. However, the relationship between APT imaging and other quantitative modalities including positron emission tomography (PET) has not been investigated in detail. This study aimed to evaluate the clinical usefulness of APT imaging in determining the metabolic status of malignant glioma and to compare findings with those from 11C-methionine (Met)-PET. METHODS: This research analyzed APT imaging data from 20 consecutive patients with malignant glioma treated between January 2022 and July 2023. Patients underwent tumor resection and correlations between tumor activity and intensity of APT signal were investigated. We also compared 11C-Met-PET and APT imaging for the same regions of the perifocal tumor invasion area. RESULTS: Clear, diagnostic APT images were obtained from all 20 cases. Mean APT intensity (APTmean) was significantly higher in the glioblastoma (GBM), IDH wild type group (27.2 ± 12.8%) than in other gliomas (6.0 ± 4.7%; p < 0.001). The cut-off APTmean to optimally distinguish between GBM and other malignant gliomas was 12.8%, offering 100% sensitivity and 83.3% specificity. These values for APTmean broadly matched the tumor-to-contralateral normal brain tissue ratio from 11C-Met-PET analysis (r = 0.66). The APT signal was also observed in the gadolinium non-contrast region on T1-weighted imaging, appearing to reflect the surrounding tumor-infiltrated area. CONCLUSIONS: APT imaging can be used to evaluate the area of tumor invasion, similar to 11C-Met-PET. APT imaging revealed low invasiveness in patients and was useful in preoperative planning for tumor resection, facilitating maximum tumor resection including the tumor invasive area.

Nafion-Integrated Resorcinol-Formaldehyde Resin Photocatalysts for Solar Hydrogen Peroxide Production.

Photocatalytic generation of H2O2 from water and O2 is a promising strategy for liquid solar-fuel production. Previously reported powder photocatalysts promote a subsequent oxidative/reductive decomposition of the H2O2 generated, thereby producing low-H2O2-content solutions. This study reports that Nafion (Nf)-integrated resorcinol-formaldehyde (RF) semiconducting resin powders (RF@Nf), synthesized by polycondensation of resorcinol and formaldehyde with an Nf dispersion solution under high-temperature hydrothermal conditions, exhibit high photocatalytic activities and produce high-H2O2-content solutions. Nf acts as a surface stabilizer and suppresses the growth of RF resins. This generates small Nf-woven resin particles with large surface areas and efficiently catalyze water oxidation and O2 reduction. The Nf-woven resin surface, due to its hydrophobic nature, hinders the access of H2O2 and suppresses its subsequent decomposition. The simulated-sunlight irradiation of the resins in water under atmospheric pressure of O2 stably generates H2O2, producing high-H2O2-content solutions with more than 0.06 wt % H2O2 (16 mM).

Clinical utility of new bone imaging using zero-echo-time sequence in neurosurgical procedures: Can zero-echo-time be used in clinical practice in neurosurgery?

PURPOSE: The purpose of this study was to evaluate the clinical usefulness of zero-echo-time (ZTE)-based magnetic resonance imaging (MRI) in planning the optimum surgical approach and applying ZTE for anatomical guidance during transcranial surgery. METHODS: Eleven of 26 patients who underwent transcranial surgery and carotid endarterectomy and in whom ZTE-based MRI and magnetic resonance angiography (MRA) data were obtained were analyzed by creating ZTE/MRA fusion images and 3D ZTE-based MRI models. We examined whether these images and models can be substituted for computed tomography imaging for neurosurgical procedures. Furthermore, the clinical usability of the 3D ZTE-based MRI models was evaluated by comparing them with actual surgical views. RESULTS: Zero-echo-time/MRA fusion images and 3D ZTE-based MRI models clearly illustrated the cranial and intracranial morphology without radiation exposure or the use of iodinated contrast medium. The models allowed determination of the optimum surgical approach to cerebral aneurysms, brain tumors near the brain surface, and cervical internal carotid artery stenosis by visualizing the relationship of lesions with adjacent bone structures. However, ZTE-based MRI did not provide useful information for surgery for skull base lesions such as vestibular schwannoma because bone structures of the skull base often include air components, which cause signal disturbance in MRI. CONCLUSIONS: Zero-echo-time sequences on MRI allowed distinct visualization of not only bone but also vital structures around the lesion. This technology has low invasiveness for patients and was useful for preoperative planning and guidance of the optimum approach during surgery in a subset of neurosurgical diseases.

Sunlight-Driven Generation of Hypochlorous Acid on Plasmonic Au/AgCl Catalysts in Aerated Chloride Solution.

HClO is typically manufactured from Cl2 gas generated by the electrochemical oxidation of Cl- using considerable electrical energy with a large concomitant emission of CO2. Therefore, renewable energy-driven HClO generation is desirable. In this study, we developed a strategy for stable HClO generation by sunlight irradiation of a plasmonic Au/AgCl photocatalyst in an aerated Cl- solution at ambient temperature. Plasmon-activated Au particles by visible light generate hot electrons, which are consumed by O2 reduction, and hot holes, which oxidize the lattice Cl- of AgCl adjacent to the Au particles. The formed Cl2 is disproportionated to afford HClO, and the removed lattice Cl- are compensated by the Cl- in the solution, thus promoting a catalytic HClO generation cycle. A solar-to-HClO conversion efficiency of ∼0.03% was achieved by simulated sunlight irradiation, where the resultant solution contained >38 ppm (>0.73 mM) of HClO and exhibited bactericidal and bleaching activities. The strategy based on the Cl- oxidation/compensation cycles will pave the way for sunlight-driven clean, sustainable HClO generation.

Polarity-Driven Isomerization of a Hydroxynaphthalimide-Containing Spiropyran at Room Temperature.

Design of spiropyrans showing spontaneous isomerization driven by the polarity of solvents is an important consideration for the synthesis of optical sensory materials. Although some spiropyrans undergo polarity-driven isomerization, they must be heated owing to the high activation energy required for isomerization. In this study, we describe that a spiropyran containing a hydroxynaphthalimide unit (1) exhibits a polarity-driven isomerization at room temperature. It exists as a colorless spirocyclic (SP) form in less polar solvents but is isomerized to a colored merocyanine (MC) form in polar solvents. The equilibrium amount of the MC form increases with an increase in the polarity of solvents. The MC form involves two resonance structures-the quinoidal and zwitterionic forms. In polar media, the zwitterionic form dominates mainly owing to solvation by polar molecules. Solvation stabilizes the negative charge of the zwitterionic form and decreases its ground state energy, thereby enhancing SP → MC isomerization. The SP ⇌ MC isomerization terminates within barely 30 s even at room temperature because the naphthol moiety with high π-electron density lowers the activation energy for the rate-determining rotational step.

Neural network-based fully automated cardiac resting phase detection algorithm compared with manual detection in patients.

Background: A cardiac resting phase is used when performing free-breathing cardiac magnetic resonance examinations. Purpose: The purpose of this study was to test a cardiac resting phase detection system based on neural networks in clinical practice. Material and Methods: Four chamber-view cine images were obtained from 32 patients and analyzed. The rest duration, start point, and end point were compared between that determined by the experts and general operators, and a similar comparison was done between that determined by the experts and neural networks: the normalized root-mean-square error (RMSE) was also calculated. Results: Unlike manual detection, the neural network was able to determine the resting phase almost simultaneously as the image was obtained. The rest duration and start point were not significantly different between the neural network and expert (p = .30, .90, respectively), whereas the end point was significantly different between the two groups (p < .05). The start point was not significantly different between the general operator and expert (p = .09), whereas the rest duration and end point were significantly different between the two groups (p < .05). The normalized RMSEs of the rest duration, start point, and end point of the neural network were 0.88, 0.64, and 0.33 ms, respectively, which were lower than those of the general operator (normalized RMSE values were 0.98, 0.68, and 0.51 ms, respectively). Conclusions: The neural network can determine the resting phase instantly with better accuracy than the manual detection of general operators.

Photocatalytic Dinitrogen Fixation with Water on High-Phosphorus-Doped Carbon Nitride with Surface Nitrogen Vacancies.

Sunlight-driven photocatalytic dinitrogen (N2) fixation with water at ambient conditions is of vital importance for a sustainable energy society. The efficiency of this reaction, however, is still low because of the difficulty in promoting both water oxidation and N2 reduction reactions. Herein, we report that a high-phosphorus-doped carbon nitride with surface nitrogen vacancies (PCN(V)) synthesized by thermal condensation under a hydrogen (H2) atmosphere using phosphorus oxide (P2O5) as a phosphorus source efficiently promotes N2 fixation. The large numbers of the doped P atoms on the PCN(V)-P2O5 catalysts enhance the oxidation of water, while the N vacancies reduce N2, facilitating efficient ammonia (NH3) generation with an apparent quantum yield at 420 nm of 3.4%. Simulated sunlight illumination of the catalyst in water under N2 bubbling produces NH3 with a solar-to-chemical conversion efficiency of 0.16%, which is the highest efficiency among the previously reported powder photocatalysts.

Solar-Driven Generation of Hydrogen Peroxide on Phenol-Resorcinol-Formaldehyde Resin Photocatalysts.

Photocatalytic generation of H2O2 from water and O2 under sunlight is a promising artificial photosynthesis reaction to generate renewable fuel. We previously found that resorcinol-formaldehyde resin powders prepared with a high-temperature hydrothermal method become semiconductors comprising π-conjugated/π-stacked benzenoid-quinoid donor-acceptor resorcinol units and are active for photocatalytic H2O2 generation. Here, we have prepared phenol-resorcinol-formaldehyde resins with small amounts of phenol (∼5 mol % relative to resorcinol), which show enhanced photocatalytic activity. Incorporating phenol bearing a single -OH group in the resin matrices relaxes the restriction on the arrangement of the aromatic rings originating from the H-bonding interactions between the resorcinol -OH groups. This creates stronger donor-acceptor π-stacking and increases the electron conductivity of the resins. We have demonstrated that simulated sunlight illumination of the resins in water under an atmospheric pressure of O2 stably generated H2O2 with more than 0.9% solar-to-chemical conversion efficiency.

Comparison of the Signal Intensity of Vestibular Schwannoma Between Growing and Nongrowing Tumors.

OBJECTIVES/HYPOTHESIS: To determine the relationship between signal intensity on gadolinium (Gd)-enhanced magnetic resonance images and growth of vestibular schwannomas (VSs). STUDY DESIGN: Cross-sectional study. METHODS: In this cross-sectional study, we retrospectively reviewed the data of 31 patients with VSs who underwent magnetic resonance imaging (MRI). The mean signal intensities within the regions of interest in the tumor, pons, and temporal muscles were measured on Gd-enhanced T1-weighted MRI. Relative intensity ratios were calculated as follows: T/N pons ratio (T/Np) is the tumor signal intensity/pons signal intensity and T/N muscle ratio (T/Nm) is the tumor signal intensity/temporal muscle signal intensity. Volume measurements were used to assess the tumor size. Growth rate was determined by assessing previous imaging studies. Growing VS was defined as a tumor with a growth rate >100 mm3 /year. RESULTS: The mean (standard deviation) T/Np and T/Nm were 1.47 (0.27) and 1.50 (0.24), respectively, in nongrowing tumors and 1.78 (0.17) and 1.90 (0.12), respectively, in growing tumors. The T/Np and T/Nm differed significantly between the two groups (T/Np, P < .001; T/Nm, P < .001). Receiver operating characteristic curve analysis showed that cutoffs of 1.56 and 1.76 for T/Np (93.33% sensitivity, 75.00% specificity) and T/Nm (100.00% sensitivity, 93.75% specificity), respectively, could be used to diagnose a growth rate of >100 mm3 /year. The area under the curve was 0.85 (95% confidence interval, 0.70-1.00) for T/Np and 0.94 (0.82-1.00) for T/Nm. CONCLUSION: Growing VSs show higher signal intensities on Gd-enhanced MRI. Thus, measuring the signal intensity of VS on Gd-enhanced MRI may aid in predicting VS growth. LEVEL OF EVIDENCE: 3 Laryngoscope, 132:198-203, 2022.

Polythiophene-Doped Resorcinol-Formaldehyde Resin Photocatalysts for Solar-to-Hydrogen Peroxide Energy Conversion.

The generation of hydrogen peroxide (H2O2) from water and dioxygen by sunlight-driven heterogeneous photocatalysis is a promising method for the artificial photosynthesis of a liquid solar fuel. We previously found that resorcinol-formaldehyde (RF) resin powders prepared by high-temperature hydrothermal synthesis act as highly active semiconductor photocatalysts for H2O2 generation. Herein, we report that RF resin powders doped with poly(3-hexylthiophene-2,5-diyl) (RF/P3HT) exhibit enhanced photocatalytic activities. The highly dispersed P3HT within the resin particles created charge transfer complexes with the conduction band of the resin via electron donation, facilitating efficient transfer of the photogenerated conduction band electrons through P3HT. This enhanced charge separation promoted efficient water oxidation and O2 reduction. The solar-to-chemical conversion efficiency for H2O2 generation on the RF/P3HT resin in water under simulated sunlight irradiation with atmospheric pressure of O2 was ∼1.0%, which is the highest efficiency reported for powder catalysts in artificial photosynthesis.

Triple-negative breast cancer on contrast-enhanced MRI and synthetic MRI: A comparison with non-triple-negative breast carcinoma.

PURPOSE: This study aimed to compare the characteristics of triple-negative breast cancer (TNBC) with non-TNBC on dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) and synthetic MRI. METHOD: This retrospective study included 79 patients with histopathologically proven breast cancer (TNBC: 16, non-TNBC: 63) who underwent synthetic MRI. Using synthetic MR images, we obtained T1 and T2 relaxation times in breast lesions before (Pre-T1, Pre-T2, Pre-PD) and after (Gd-T1, Gd-T2, Gd-PD) contrast agent injection. Subsequently, we calculated the ΔT1 (Pre-T1 - Gd-T1), ΔT2 (Pre-T2 - Gd-T2), Pre-T1/T2, and Gd-T1/T2. We compared the aforementioned quantitative values, as well as several morphologic features between TNBCs and non-TNBCs that were identified on DCE-MRI. RESULTS: The multivariate analyses revealed that the Pre-T2 (P = 0.037) and the presence of rim enhancement (P-RIM) (P = 0.034) were significant and independent predictors of TNBC. The area under the receiver operating characteristics curve for all breast cancers was greater when a combination of Pre-T2 and P-RIM (Pre-T2＋P-RIM; Method 3, AUC (area under the curve) = 0.858) was used to distinguish between TNBCs and non-TNBCs versus the use of either Pre-T2 alone (Method 1, AUC = 0.786) or P-RIM alone (Method 2, AUC = 0.747). CONCLUSIONS: Pre-T2 obtained using synthetic MRI and P-RIM identified on DCE-MRI allowed the differentiation between TNBCs and non-TNBCs. However, these results are preliminary and need to be verified by further studies.

Spontaneous Isomerization of a Hydroxynaphthalene-Containing Spiropyran in Polar Solvents Enhanced by Hydrogen Bonding Interactions.

The synthesis of spiropyran dyes exhibiting solvent-driven isomerization even in the dark condition is an important subject for the design of optical materials. A conventional synthesis strategy involves the conjugation of indoline moieties with electron-deficient aromatic moieties. Herein, we report that a spiropyran conjugated with a hydroxynaphthalene moiety (1) is a new member exhibiting solvent-driven isomerization, even bearing an electron-donating -OH moiety. The dye exists as a colorless spirocyclic (SP) form in nonpolar media. It, however, shows a blue color in polar media, especially in aqueous media, due to the formation of ring-opened merocyanine (MC) forms, where the isomerization terminates in 10 s even at room temperature. The spontaneous SP → MC isomerization originates from the MC forms stabilized by the highly delocalized π-electrons on the hydroxynaphthalene moiety. The solvation in polar media and the hydrogen bonding interaction with water molecules decrease the ground-state energy of the MC forms, triggering spontaneous isomerization. The dye exhibits two MC absorption bands assigned to the trans-trans-cis (TTC) and cis-trans-cis (CTC) isomers. The absorbance of the CTC band increases more significantly with an increase in the water content, and the increase exhibits a linear relationship with a hydrogen-bond donor acidity of solvents. The phenolate oxygen of the CTC form has larger hydrogen-bond acceptor basicity, resulting in stronger stabilization by the water molecule.

Enhanced Masses on Contrast-Enhanced Breast: Differentiation Using a Combination of Dynamic Contrast-Enhanced MRI and Quantitative Evaluation with Synthetic MRI.

BACKGROUND: The addition of synthetic MRI might improve the diagnostic performance of dynamic contrast-enhanced MRI (DCE-MRI) in patients with breast cancer. PURPOSE: To evaluate the diagnostic value of a combination of DCE-MRI and quantitative evaluation using synthetic MRI for differentiation between benign and malignant breast masses. STUDY TYPE: Retrospective, observational. POPULATION: In all, 121 patients with 131 breast masses who underwent DCE-MRI with additional synthetic MRI were enrolled. FIELD STRENGTH/SEQUENCE: 3.0 Tesla, T1 -weighted DCE-MRI and synthetic MRI acquired by a multiple-dynamic, multiple-echo sequence. ASSESSMENT: All lesions were differentiated as benign or malignant using the following three diagnostic methods: DCE-MRI type based on the Breast Imaging-Reporting and Data System; synthetic MRI type using quantitative evaluation values calculated by synthetic MRI; and a combination of the DCE-MRI + Synthetic MRI types. The diagnostic performance of the three methods were compared. STATISTICAL TESTS: Univariate (Mann-Whitney U-test) and multivariate (binomial logistic regression) analyses were performed, followed by receiver-operating characteristic curve (AUC) analysis. RESULTS: Univariate and multivariate analyses showed that the mean T1 relaxation time in a breast mass obtained by synthetic MRI prior to injection of contrast agent (pre-T1 ) was the only significant quantitative value acquired by synthetic MRI that could independently differentiate between malignant and benign breast masses. The AUC for all enrolled breast masses assessed by DCE-MRI + Synthetic MRI type (0.83) was significantly greater than that for the DCE-MRI type (0.70, P < 0.05) or synthetic MRI type (0.73, P < 0.05). The AUC for category 4 masses assessed by the DCE-MRI + Synthetic MRI type was significantly greater than that for those assessed by the DCE-MRI type (0.74 vs. 0.50, P < 0.05). DATA CONCLUSION: A combination of synthetic MRI and DCE-MRI improves the accuracy of diagnosis of benign and malignant breast masses, especially category 4 masses. Level of Evidence 4 Technical Efficacy Stage 2 J. MAGN. RESON. IMAGING 2021;53:381-391.

Detecting a subendocardial infarction in a child with coronary anomaly by three-dimensional late gadolinium enhancement MRI using compressed sensing.

Three-dimensional high-resolution late gadolinium enhancement (3D HR LGE) magnetic resonance imaging (MRI) using compressed sensing can help detect small myocardial infarcts. We discuss the case of an 11-year-old child with an anomalous aortic origin of the left coronary artery. Since he was suspected to have coronary stenosis due to anomalous aortic origin of the left coronary artery, cardiovascular MRI, including conventional two-dimensional (2D) LGE MRI and HR 3D LGE MRI, was conducted. Myocardial scars were not clearly observed via 2D LGE MRI; however, 3D HR MRI revealed subendocardial infarction of the anteroseptal wall, which corresponded to the left coronary artery. By applying the compressed sensing technique, 3D HR LGE, MRI enables a detailed assessment of small myocardial infarcts in a clinically feasible scan time.

Photocatalytic hydrogen peroxide splitting on metal-free powders assisted by phosphoric acid as a stabilizer.

Hydrogen peroxide (H2O2) has received increasing attention as an energy carrier. To achieve a sustainable energy society, photocatalytic H2O2 splitting (H2O2 (l) → H2 (g) + O2 (g); ΔG° = + 131 kJ mol-1) is a desirable reaction for on-site H2 generation. However, this reaction has not been reported because conventional photocatalysis decomposes H2O2 by disproportionation (H2O2 (l) → H2O (l) + 1/2O2 (g); ΔG° = -117 kJ mol-1) and by promoting H2O2 reduction instead of H+ reduction. Here we report the successful example of H2O2 splitting. Visible light irradiation of a graphitic carbon nitride loaded with graphene quantum dots as co-catalysts (GQDs/g-C3N4) in a H2O2 solution containing phosphoric acid (H3PO4) produces H2. H3PO4 associates with H2O2 via hydrogen bonding, and this stabilization of H2O2 suppresses its reduction, thus promoting H+ reduction. The all-organic photosystem with H3PO4 as a stabilizer may provide a basis of photocatalytic H2O2 splitting.

Photocatalytic Dinitrogen Fixation with Water on Bismuth Oxychloride in Chloride Solutions for Solar-to-Chemical Energy Conversion.

Ammonia is an indispensable chemical. Photocatalytic NH3 production via dinitrogen fixation using water by sunlight illumination under ambient conditions is a promising strategy, although previously reported catalysts show insufficient activity. Herein, we showed that ultraviolet light irradiation of a semiconductor, bismuth oxychloride with surface oxygen vacancies (BiOCl-OVs), in water containing chloride anions (Cl-) under N2 flow efficiently produces NH3. The surface OVs behave as the N2 reduction sites by the photoformed conduction band electrons. The valence band holes are consumed by self-oxidation of interlayer Cl- on the catalyst. The hypochloric acid (HClO) formed absorbs ultraviolet light and undergoes photodecomposition into O2 and Cl-. These consecutive photoreactions produce NH3 with water as the electron donor. The Cl- in solution compensates for the removed interlayer Cl- and inhibits catalyst deactivation. Simulated sunlight illumination of the catalyst in seawater stably generates NH3 with 0.05% solar-to-chemical conversion efficiency, thus exhibiting significant potential of the seawater system for artificial photosynthesis.