Trends in Stage-Specific Kidney Cancer Incidence in Kazakhstan, 2005-2019.

OBJECTIVE: The aim is to analyze the incidence of kidney cancer over a 15-year period, considering factors such as stage, age, sex, and morphological verification in the regional context in Kazakhstan. METHODS: The retrospective study was done using descriptive and analytical methods of oncoepidemiology. The extensive, crude and age-specific incidence rates are determined according to the generally accepted methodology used in sanitary statistics. The data were used to calculate the average percentage change (APС) using the Joinpoint regression analysis to determine the trend over the study period. RESULTS: Among the meticulously documented 15,277 cases, a conspicuous male predominance was noted, comprising 53.7% of cases compared to 46.3% in females, with peak incidences observed within the 50-69 age cohorts. The average age at diagnosis exhibited a progressive rise over the study period, with discernible variations observed in age-specific incidence rates, particularly pronounced within the 60-84 age brackets. Noteworthy temporal trends indicated a consistent uptick in crude incidence rates, with distinct regional disparities manifesting higher rates in northern regions relative to their southern and western counterparts. Stratification by cancer stage unveiled a significant surge in stages I-II cases alongside a concomitant decrement in stage III incidences, complemented by reductions in stage IV occurrences and instances of unspecified disease stages. Morphological verification rates displayed regional variations, with an overarching ascending trajectory across most regions, albeit exceptions noted, notably in the Kyzylorda region. CONCLUSION: Our study identified a rise in kidney cancer incidence in Kazakhstan, likely reflecting global trends driven by increased risk factor exposure and incidental imaging findings. Regional disparities and varied stage distributions highlight the complexity of kidney cancer epidemiology. Despite advancements in early detection, delayed diagnosis persists, necessitating improved surveillance and diagnostic practices.

Liver Cancer Incidence in Kazakhstan: Fifteen-Year Retrospective Study.

OBJECTIVE: The aim is to study the trends of liver cancer (LC) incidence in the regional context in Kazakhstan. METHODS: The retrospective study was done using descriptive and analytical methods of oncoepidemiology. The extensive, crude and age-specific incidence rates are determined according to the generally accepted methodology used in sanitary statistics. The data were used to calculate the average percentage change (APС) using the Joinpoint regression analysis to determine the trend over the study period. RESULTS: Between 2005 and 2019, 13,510 cases of LC were documented, comprising 59.3% males and 40.7% females. Most diagnoses were seen in age groups 55-59 years (13.3%) to 75-79 years (11.7%). LC patients' average age increased from 63.6 to 64.5 years. Incidence rates per 100,000 peaked at ages 65-69 years (35.1±1.0) and 70-74 years (43.3±1.0). LC incidence notably rose in the 70-74 years age group (APC=+0.89), contrasting with declining trends in younger age groups. Regional incidence variations revealed diverse patterns, mostly demonstrating unimodal increases, and some regions displaying bimodal growth. The age-standardized incidence rate was 5.7±0.1 per 100,000, declining from 2005 to 2012 (APC: -3.93), then rising until 2019 (APC: +1.13). Gender-specific standardized rates showed varied trends. Analyses of standardized indicators indicated declining trends in most regions but increased values in specific areas. Thematic maps classified incidence rates based on standardized indicators: low (up to 5.22), average (5.22 to 7.11), high (above 7.11 per 100,000 for the entire population). CONCLUSION: The study on liver cancer in Kazakhstan reveals marked gender and age differences. The standardized incidence rate among men was twofold greater than that among women. A distinct rise in cases was noted among individuals aged 70-74 years. Regional variations in incidence were evident. These findings emphasize the necessity for focused research to comprehend the causes behind these differences, enabling customized interventions for Kazakhstan's population.

Photoinduced Transition from Quasi-Two-Dimensional Ruddlesden-Popper to Three-Dimensional Halide Perovskites for the Optical Writing of Multicolor and Light-Erasable Images.

Optical data storage, information encryption, and security labeling technologies require materials that exhibit local, pronounced, and diverse modifications of their structure-dependent optical properties under external excitation. Herein, we propose and develop a novel platform relying on lead halide Ruddlesden-Popper phases that undergo a light-induced transition toward bulk perovskite and employ this phenomenon for the direct optical writing of multicolor patterns. This transition causes the weakening of quantum confinement and hence a reduction in the band gap. To extend the color gamut of photoluminescence, we use mixed-halide compositions that exhibit photoinduced halide segregation. The emission of the films can be tuned across the range of 450-600 nm. Laser irradiation provides high-resolution direct writing, whereas continuous-wave ultraviolet exposure is suitable for recording on larger scales. The luminescent images created on such films can be erased during the visualization process. This makes the proposed writing/erasing platform suitable for the manufacturing of optical data storage devices and light-erasable security labels.

Stokes and Anti-Stokes Luminescent Rare-Earth-Doped Tantalum Oxide Nanoparticles.

Doping of nano- and microparticles of oxides with rare earth elements (REEs) is used to fine-tune their structural, optical, and electrochemical properties. On the way to establish the structure-property relationship, we dope tantalum oxide (Ta2O5) particles with REEs to study their effect on the oxide structure and luminescence. Ta2O5 is highly perspective in medicine, catalysis, and optics, but its crystal structure is insufficiently studied. Two synthesis approaches (sol-gel and solvothermal) were used to obtain powders with different textures. Experimental and theoretical studies of amorphous and crystallized tantalum oxide NPs by means of X-ray powder diffraction, Rietveld analysis, EXAFS/XANES spectroscopy, and density functional theory calculations were performed. All samples (doped and undoped) crystallized in orthorhombic phase with no admixtures. It was demonstrated that Ta2O5 is a promising wide-spectrum luminescent material: by combining REEs, both Stokes and anti-Stokes luminescence in the visible region were obtained. By means of optical absorption spectroscopy, it was shown that the prepared samples could be classified as wide band gap semiconductors.

Elastic Gallium Phosphide Nanowire Optical Waveguides-Versatile Subwavelength Platform for Integrated Photonics.

Emerging technologies for integrated optical circuits demand novel approaches and materials. This includes a search for nanoscale waveguides that should satisfy criteria of high optical density, small cross-section, technological feasibility and structural perfection. All these criteria are met with self-assembled gallium phosphide (GaP) epitaxial nanowires. In this work, the effects of the nanowire geometry on their waveguiding properties are studied both experimentally and numerically. Cut-off wavelength dependence on the nanowire diameter is analyzed to demonstrate the pathways for fabrication of low-loss and subwavelength cross-section waveguides for visible and near-infrared (IR) ranges. Probing the waveguides with a supercontinuum laser unveils the filtering properties of the nanowires due to their resonant action. The nanowires exhibit perfect elasticity allowing fabrication of curved waveguides. It is demonstrated that for the nanowire diameters exceeding the cut-off value, the bending does not sufficiently reduce the field confinement promoting applicability of the approach for the development of nanoscale waveguides with a preassigned geometry. Optical X-coupler made of two GaP nanowires allowing for spectral separation of the signal is fabricated. The results of this work open new ways for the utilization of GaP nanowires as elements of advanced photonic logic circuits and nanoscale interferometers.

New Approach toward Dual-Emissive Organic-Inorganic Hybrids by Integrating Mn(II) and Cu(I) Emission Centers in Ionic Crystals.

Inorganic-organic hybrid luminescent materials have received great attention for their potential applications in a wide range of clean/renewable energy-related areas, including photovoltaics and solid-state lighting. Herein, we present a unique and general "Mn + Cu" approach by blending two earth-abundant luminogenic metals, manganese and copper, within a single ionic structure to construct a remarkable family of low-cost and multifunctional hybrid materials featuring dual emission, as well as triboluminescence and second-harmonic generation response. The novel hybrid materials are made of diphosphine dioxide-chelated [Mn(O∧O)3]2+ cations and various anionic [CuxIy](y-x)- clusters, ensuring manifestation of dual phosphorescence streamed from octahedral Mn2+ ions (605-648 nm) and iodocuprate anions (480-728 nm). Noteworthily, the relative ratio of the emission bands, and hence a resulting emission chromaticity, can be tuned in a wide range through modification of cluster [CuxIy](y-x)- modules. The structural diversity, enhanced robustness, and up to 100% luminescence quantum yield make the designed materials promising phosphors for lighting and sensing applications.

Femtosecond Laser-Assisted Formation of Hybrid Nanoparticles from Bi-Layer Gold-Silicon Films for Microscale White-Light Source.

It is very natural to use silicon as a primary material for microelectronics. However, silicon application in nanophotonics is limited due to the indirect gap of its energy band structure. To improve the silicon emission properties, it can be combined with a plasmonic part. The resulting metal-dielectric (hybrid) nanostructures have shown their excellence compared to simple metallic dielectric nanostructures. Still, in many cases, the fabrication of such structures is time consuming and quite difficult. Here, for the first time, we demonstrate a single-step and lithography-free laser-induced dewetting of bi-layer nanoscale-thickness gold-silicon films supported by a glass substrate to produce hybrid nanoparticles. For obtaining hybrid nanoparticles, we study nonlinear photoluminescence by mapping their optical response and morphology by scanning electron microscopy. This method can be used for the fabrication of arrays of hybrid nanoparticles providing white-light photoluminescence with a good control of their microscopic sizes and position. The developed approach can be useful for a wide range of photonic applications including the all-optical data processing and storage where miniaturization down to micro- and nanoscale together with an efficiency increase is of high demand.

Single GaP nanowire nonlinear characterization with the aid of an optical trap.

Semiconductor nanowires exhibit numerous capabilities to advance the development of future optoelectronic devices. Among the III-V material family, gallium phosphide (GaP) is an attractive platform with low optical absorption and high nonlinear susceptibility, making it especially promising for nanophotonic applications. However, investigation of single nanostructures and their waveguiding properties remains challenging owing to typically planar experimental arrangements. Here we study the linear and nonlinear waveguiding optical properties of a single GaP nanowire in a special experimental layout, where an optically trapped structure is aligned along its major axis. We demonstrate efficient second harmonic generation in individual nanowires and unravel phase matching conditions, linking between linear guiding properties of the structure and its nonlinear tensorial susceptibility. The capability to pick up single nanowires, sort them with the aid of optomechanical manipulation and accurately position pre-tested structures opens a new avenue for the generation of optoelectronic origami-type devices.

Multicolor Phenylenediamine Carbon Dots for Metal-Ion Detection with Picomolar Sensitivity.

Carbon dots keep attracting attention in multidisciplinary fields, motivating the development of new compounds. Phenylenediamine C6H4(NH2)2 dots are known to exhibit colorful emission, which depends on size, composition, and the functional surface groups, forming those structures. While quite a few fabrication protocols have been developed, the quantum yield of phenylenediamine dots still does not exceed 50% owing to undesired fragment formation during carbonization. Here, we demonstrate that an ethylene glycol-based environment allows obtaining multicolor high-quantum-yield phenylenediamine carbon dots. In particular, a kinetic realization of solvothermal synthesis in acidic environments enhances carbonization reaction yield for meta phenylenediamine compounds and leads to quantum yields, exciting 60%. Reaction yield after the product's purification approaches 90%. Furthermore, proximity of metal ions (Nd3+, Co3+, La3+) can either enhance or quench the emission, depending on the concentration. Optical monitoring of the solution allows performing an accurate detection of ions at picomolar concentrations. An atomistic model of carbon dots was developed to confirm that the functional surface group positioning within the molecular structure has a major impact on dots' physicochemical properties. The high performance of new carbon dots paves the way toward their integration in numerous applications, including imaging, sensing, and therapeutics.

Amplified spontaneous emission and gain in highly concentrated Rhodamine-doped peptide derivative.

Bioinspired fluorescence, being widely explored for imaging purposes, faces challenges in delivering bright biocompatible sources. While quite a few techniques have been developed to reach this goal, encapsulation of high-quantum yield fluorescent dyes in natural biological forms suggest achieving superior light-emitting characteristics, approaching amplified spontaneous emission and even lasing. Here we compare gain capabilities of highly concentrated Rhodamine B solutions with a newly synthesized biocompatible peptide derivative hybrid polymer/peptide material, RhoB-PEG1300-F6, which contains the fluorescent covalently bound dye. While concentration quenching effects limit the maximal achievable gain of dissolved Rhodamine B, biocompatible conjugation allows elevating amplification coefficients towards moderately high values. In particular, Rhodamine B, anchored to the peptide derivative material, demonstrates gain of 22-23 cm-1 for a 10-2 M solution, while a pure dye solution possesses 25% smaller values at the same concentration. New biocompatible fluorescent agents pave ways to demonstrate lasing in living organisms and can be further introduced to therapeutic applications, if proper solvents are found.

Golden Vaterite as a Mesoscopic Metamaterial for Biophotonic Applications.

Mesoscopic photonic systems with tailored optical responses have great potential to open new frontiers in implantable biomedical devices. However, biocompatibility is typically a problem, as engineering of optical properties often calls for using toxic compounds and chemicals, unsuitable for in vivo applications. Here, a unique approach to biofriendly delivery of optical resonances is demonstrated. It is shown that the controllable infusion of gold nanoseeds into polycrystalline sub-micrometer vaterite spherulites gives rise to a variety of electric and magnetic Mie resonances, producing a tuneable mesoscopic optical metamaterial. The 3D reconstruction of the spherulites demonstrates the capability of controllable gold loading with volumetric filling factors exceeding 28%. Owing to the biocompatibility of the constitutive elements, "golden vaterite" paves the way to introduce designer-made Mie resonances to cutting-edge biophotonic applications. This concept is exemplified by showing efficient laser heating of gold-filled vaterite spherulites at red and near-infrared wavelengths, highly desirable in photothermal therapy, and photoacoustic tomography.

Luminescent Erbium-Doped Silicon Thin Films for Advanced Anti-Counterfeit Labels.

The never-ending struggle against counterfeit demands the constant development of security labels and their fabrication methods. This study demonstrates a novel type of security label based on downconversion photoluminescence from erbium-doped silicon. For fabrication of these labels, a femtosecond laser is applied to selectively irradiate a double-layered Er/Si thin film, which is accomplished by Er incorporation into a silicon matrix and silicon-layer crystallization. The study of laser-induced heating demonstrates that it creates optically active erbium centers in silicon, providing stable and enhanced photoluminescence at 1530 nm. Such a technique is utilized to create two types of anti-counterfeiting labels. The first type is realized by the single-step direct laser writing of luminescent areas and detected by optical microscopy as holes in the film forming the desired image. The second type, with a higher degree of security, is realized by adding other fabrication steps, including the chemical etching of the Er layer and laser writing of additional non-luminescent holes over an initially recorded image. During laser excitation at 525 nm of luminescent holes of the labels, a photoluminescent picture repeating desired data can be seen. The proposed labels are easily scalable and perspective for labeling of goods, securities, and luxury items.

Auxiliary Optomechanical Tools for 3D Cell Manipulation.

Advances in laser and optoelectronic technologies have brought the general concept of optomechanical manipulation to the level of standard biophysical tools, paving the way towards controlled experiments and measurements of tiny mechanical forces. Recent developments in direct laser writing (DLW) have enabled the realization of new types of micron-scale optomechanical tools, capable of performing designated functions. Here we further develop the concept of DLW-fabricated optomechanically-driven tools and demonstrate full-3D manipulation capabilities over biological objects. In particular, we resolved the long-standing problem of out-of-plane rotation in a pure liquid, which was demonstrated on a living cell, clamped between a pair of forks, designed for efficient manipulation with holographic optical tweezers. The demonstrated concept paves the way for the realization of flexible tools for performing on-demand functions over biological objects, such as cell tomography and surgery to name just few.

Biological Kerker Effect Boosts Light Collection Efficiency in Plants.

Being the polymorphs of calcium carbonate (CaCO3), vaterite and calcite have attracted a great deal of attention as promising biomaterials for drug delivery and tissue engineering applications. Furthermore, they are important biogenic minerals, enabling living organisms to reach specific functions. In nature, vaterite and calcite monocrystals typically form self-assembled polycrystal micro- and nanoparticles, also referred to as spherulites. Here, we demonstrate that alpine plants belonging to the Saxifraga genus can tailor light scattering channels and utilize multipole interference effect to improve light collection efficiency via producing CaCO3 polycrystal nanoparticles on the margins of their leaves. To provide a clear physical background behind this concept, we study optical properties of artificially synthesized vaterite nanospherulites and reveal the phenomenon of directional light scattering. Dark-field spectroscopy measurements are supported by a comprehensive numerical analysis, accounting for the complex microstructure of particles. We demonstrate the appearance of generalized Kerker condition, where several higher order multipoles interfere constructively in the forward direction, governing the interaction phenomenon. As a result, highly directive forward light scattering from vaterite nanospherulites is observed in the entire visible range. Furthermore, ex vivo studies of microstructure and optical properties of leaves for the alpine plants Saxifraga "Southside Seedling" and Saxifraga Paniculata Ria are performed and underline the importance of the Kerker effect for these living organisms. Our results pave the way for a bioinspired strategy of efficient light collection by self-assembled polycrystal CaCO3 nanoparticles via tailoring light propagation directly to the photosynthetic tissue with minimal losses to undesired scattering channels.

Single-Mode Lasing from Imprinted Halide-Perovskite Microdisks.

Halide-perovskite microlasers have demonstrated fascinating performance owing to their low-threshold lasing at room temperature and low-cost fabrication. However, being synthesized chemically, controllable fabrication of such microlasers remains challenging, and it requires template-assisted growth or complicated nanolithography. Here, we suggest and implement an approach for the fabrication of microlasers by direct laser ablation of a thin film on glass with donut-shaped femtosecond laser beams. The fabricated microlasers represent MAPbBr xI y microdisks with 760 nm thickness and diameters ranging from 2 to 9 µm that are controlled by a topological charge of the vortex beam. As a result, this method allows one to fabricate single-mode perovskite microlasers operating at room temperature in a broad spectral range (550-800 nm) with Q-factors up to 5500. High-speed fabrication and reproducibility of microdisk parameters, as well as a precise control of their location on a surface, make it possible to fabricate centimeter-sized arrays of such microlasers. Our finding is important for direct writing of fully integrated coherent light sources for advanced photonic and optoelectronic circuitry.

Non-Mie optical resonances in anisotropic biomineral nanoparticles.

The optical properties of nanoparticles have attracted continuous attention owing to their high fundamental and applied importance across many disciplines. A recently emerged field of all-dielectric nanophotonics employs optically induced electric and magnetic Mie resonances in dielectric nanoparticles with a high refractive index. This property allows obtaining additional valuable degrees of freedom to control the optical responses of nanophotonic structures. Here we propose a conceptually distinct approach towards reaching optical resonances in dielectric nanoparticles. We show that, lacking conventional Mie resonances, low-index nanoparticles can exhibit a novel anisotropy-induced family of non-Mie eigenmodes. Specifically, we investigate light interactions with calcite and vaterite nanospheres and compare them with the Mie scattering by a fused silica sphere. Having close permittivities and the same dimensions, these particles exhibit significantly different scattering behavior owing to their internal structure. While a fused silica sphere does not demonstrate any spectral features, the uniaxial structure of the permittivity tensor for calcite and the non-diagonal permittivity tensor for vaterite result in a set of distinguishable peaks in scattering spectra. Multipole decomposition and eigenmode analysis reveal that these peaks are associated with a new family of electric and magnetic resonances. We identify magnetic dipole modes of ordinary, extraordinary and hybrid polarization as well as complex electric dipole resonances, featuring a significant toroidal electric dipole moment. As both vaterite and calcite are biominerals, naturally synthesized and exploited by a variety of living organisms, our results provide an indispensable toolbox for understanding and elucidating the mechanisms behind the optical functionalities of true biological systems.

Optical Manipulation along an Optical Axis with a Polarization Sensitive Meta-Lens.

The ability to manipulate small objects with focused laser beams opens a broad spectrum of opportunities in fundamental and applied studies, for which precise control over mechanical path and stability is required. Although conventional optical tweezers are based on refractive optics, the development of compact trapping devices that could be integrated within fluid cells is in high demand. Here, a plasmonic polarization-sensitive metasurface-based lens, embedded within a fluid, is demonstrated to provide several stable trapping centers along the optical axis. The position of a particle is controlled with the polarization of the incident light, interacting with plasmonic nanoscale patch antennas, organized within overlapping Fresnel zones of the lens. While standard diffractive optical elements face challenges in trapping objects in the axial direction outside the depth of focus, bifocal Fresnel meta-lens demonstrates the capability to manipulate a bead along a 4 µm line. An additional fluorescent module, incorporated within the optical trapping setup, was implemented and enabled the accurate mapping of optical potentials via a particle-tracking algorithm. Auxiliary micro- and nanostructures, integrated within fluidic devices, provide numerous opportunities to achieve flexible optomechanical manipulation, including transport, trapping, and sorting, which are in high demand for lab-on-a-chip applications and many others.

Plasmon-assisted optical trapping and anti-trapping.

The ability to manipulate small objects with focused laser beams has opened a venue for investigating dynamical phenomena relevant to both fundamental and applied science. Nanophotonic and plasmonic structures enable superior performance in optical trapping via highly confined near-fields. In this case, the interplay between the excitation field, re-scattered fields and the eigenmodes of a structure can lead to remarkable effects; one such effect, as reported here, is particle trapping by laser light in a vicinity of metal surface. Surface plasmon excitation at the metal substrate plays a key role in tailoring the optical forces acting on a nearby particle. Depending on whether the illuminating Gaussian beam is focused above or below the metal-dielectric interface, an order-of-magnitude enhancement or reduction of the trap stiffness is achieved compared with that of standard glass substrates. Furthermore, a novel plasmon-assisted anti-trapping effect (particle repulsion from the beam axis) is predicted and studied. A highly accurate particle sorting scheme based on the new anti-trapping effect is analyzed. The ability to distinguish and configure various electromagnetic channels through the developed analytical theory provides guidelines for designing auxiliary nanostructures and achieving ultimate control over mechanical motion at the micro- and nano-scales.

Microwave platform as a valuable tool for characterization of nanophotonic devices.

The rich potential of the microwave experiments for characterization and optimization of optical devices is discussed. While the control of the light fields together with their spatial mapping at the nanoscale is still laborious and not always clear, the microwave setup allows to measure both amplitude and phase of initially determined magnetic and electric field components without significant perturbation of the near-field. As an example, the electromagnetic properties of an add-drop filter, which became a well-known workhorse of the photonics, is experimentally studied with the aid of transmission spectroscopy measurements in optical and microwave ranges and through direct mapping of the near fields at microwave frequencies. We demonstrate that the microwave experiments provide a unique platform for the comprehensive studies of electromagnetic properties of micro- and nanophotonic devices, and allow to obtain data which are hardly acquirable by conventional optical methods.

Fabrication of Hybrid Nanostructures via Nanoscale Laser-Induced Reshaping for Advanced Light Manipulation.

Ordered hybrid nanostructures for nanophotonics applications are fabricated by a novel approach via femtosecond laser melting of asymmetric metal-dielectric (Au/Si) nanoparticles created by lithographical methods. The approach allows selective reshaping of the metal components of the hybrid nanoparticles without affecting the dielectric ones and is applied for tuning of the scattering properties of the hybrid nanostructures in the visible range.