Sunlight-mediated removal of endocrine disruptors from Wastewater using trimetallic core-shell Ag-TeO2@ZnO nanocomposites.

The current work emphasizes the synthesis of a trimetallic core-shell Ag-TeO2@ZnO nanocomposites by thermo-mechanical method for the efficient photocatalytic degradation of 2,4-Dichlorophenol and ß-naphthol pollutants. The phase, crystallite size and morphological studies of the prepared Ag-TeO2@ZnO nanocomposites were studied by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. FE-SEM shows that Ag and TeO2 nanoparticles are deposited on the surface of ZnO nanotubes. The synthesized nanocomposite exhibited remarkable photocatalytic performance for the degradation of beta-naphthol (95.6%) in 40 min at the concentration of (0.6 mg/mL) and 2,4-DCP (99.6%) in 180 min (0.4 mg/mL) under natural sunlight. The electrochemical measurements were carried out using cyclic voltammetry and electrochemical impedance spectroscopy. Determination of reactive oxygen species (ROS) confirmed that the degradation of the pollutants by 5wt% Ag-TeO2@ZnO NCs was due to the formation of superoxide radicals. Electron paramagnetic resonance revealed the presence of sharp signals in pure ZnO nanoparticles at g ~1.9530 and oxygen vacancy peak at g~2.01 in 5 wt% Ag-TeO2@ZnO NCs. The reduction in the intensity of oxygen vacancy peak in 5 wt% Ag-TeO2@ZnO NCs resulted in higher ROS generation and, finally enhanced photocatalytic activity. To study the mechanism behind the degradation of pollutants, a scavenger test using histidine and ascorbic acid (ROS scavengers) was performed. The synthesized nanocomposites are highly stable and showed enhanced efficiency up to three cycles, confirming their reusability as a photocatalyst. We believe the synthesis method and the nanocomposite's high photocatalytic activity could be utilized extensively in wastewater treatment under natural sunlight.

Soluble natural sweetener from date palm (Phoenix dactylifera L.) extract using colloidal gas aphrons generated with a food-grade non-ionic surfactant.

Date palm (Phoenix dactylifera L.) is the most commonly cultivated fruit tree in the Middle East and North Africa. Date fruits are an excellent source of nutrition due to their high sugar content and high levels of phenols, minerals, and antioxidants. This work aimed to prepare a soluble natural sweetener from date fruit extract using colloidal gas aprons (CGAs) generated with a food-grade non-ionic surfactant (Tween 20). Various process parameters, such as the flow rate of the CGAs, the volume of the feed, the temperature of the CGAs, and the feed solution, were varied to obtain the optimal parameters. In the foam phase, the maximum soluble sugar enrichment of 92% was obtained at a flow rate of 50 mL/min of CGA and a solution temperature of 23 °C. The formation of intermolecular hydrogen bonding between the glucose molecules and the surfactant Tween 20 was confirmed by molecular modeling studies. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05907-9.

Optimization of desorption parameters using response surface methodology for enhanced recovery of arsenic from spent reclaimable activated carbon: Eco-friendly and sorbent sustainability approach.

Desorption and adsorbent regeneration are imperative factors that are required to be taken into account when designing the adsorption system. From the environmental, economic, and practical points of view, regeneration is necessary for evaluating the efficiency and sustainability of synthesized adsorbents. However, no study has investigated the optimization of arsenic species desorption from spent adsorbents and their regeneration ability for reuse as well as safe disposal. This study aims to investigate the desorption ability of arsenic ions adsorbed on hybrid granular activated carbon and the optimization of the independent factors influencing the efficient recovery of arsenic species from the spent activated carbon using central composite design of the response surface methodology. The activated carbon before the sorption process and after the adsorption-desorption of arsenic ions have been characterized using SEM-EDX, FTIR, and TEM. The study found that all the investigated independent desorption variables greatly influence the retrievability of arsenic ions from the spent activated carbon. Using the desirability function for the optimization of the independent factors as a function of desorption efficiency, the optimum experimental conditions were solution pH of 2.00, eluent concentration of 0.10 M, and temperature of 26.63 ℃, which gave maximum arsenic ions recovery efficiency of 91 %. The validation of the quadratic model using laboratory confirmatory experiments gave an optimum arsenic ions desorption efficiency of 97 %. Therefore, the study reveals that the application of the central composite design of the response surface methodology led to the development of an accurate and valid quadratic model, which was utilized in the enhanced optimization of arsenic ions recovery from the spent reclaimable activated carbon. More so, the desorption isotherm and kinetic data of arsenic were well correlated with the Langmuir and the pseudo-second-order models, while the thermodynamics studies indicated that arsenic ions desorption process was feasible, endothermic, and spontaneous.

Composites of sodium alginate based - Functional materials towards sustainable adsorption of benzene phenol derivatives - Bisphenol A/Triclosan.

The present study evaluates the adsorption efficiency of low-cost carbonaceous adsorbents as fly ash (FA), saw dust biochar (SDB) (untreated and alkali - treated), live/dead pulverized white rot fungus Hypocrea lixii biomass encapsulated in sodium alginate (SA) against the commercially available activated carbon (AC) and graphene oxide (GO) SA beads for removal of benzene phenol derivatives - Bisphenol A (BPA)/triclosan (TCS). Amongst bi - and tri - composites SA beads, tri-composite beads comprising of untreated flyash - dead fungal biomass - sodium alginate (UFA - DB - SA) showed at par results with commercial composite beads. The tri - composite beads with point zero charge (Ppzc) of 6.2 was characterized using FTIR, XRD, surface area BET and SEM-EDX. The batch adsorption using tri - composite beads revealed removal of 93% BPA with adsorption capacity of 16.6 mg/g (pH 6) and 83.72% TCS with adsorption capacity of 14.23 mg/g (pH 5), respectively at 50 ppm initial concentration with 6 % adsorbent dose in 5 h. Freundlich isotherm favoring multilayered adsorption provided a better fit with r2 of 0.9674 for BPA and 0.9605 for TCS respectively. Intraparticle diffusion model showed adsorption of BPA/TCS molecules to follow pseudo - second order kinetics with boundary layer diffusion governed by first step of fast adsorption and intraparticle diffusion within pores by second slow adsorption step. Thermodynamic parameters (ΔH°, ΔS°, ΔG°) revealed adsorption process as exothermic, orderly and spontaneous. Methanol showed better desorbing efficiency leading to five cycles reusability. The phytotoxicity assay revealed increased germination rate of mung bean (Vigna radiata) seeds, sprinkled with post adsorbed treated water (0 h, 5 h and 7 h) initially spiked with 50 ppm BPA/TCS. Overall, UFA - DB - SA tri - composite beads provides a cost effective and eco - friendly matrix for effective removal of hydrophobic recalcitrant compounds.

Adsorption and desorption processes of toxic heavy metals, regeneration and reusability of spent adsorbents: Economic and environmental sustainability approach.

A growing number of variables, including rising population, water scarcity, growth in the economy, and the existence of harmful heavy metals in the water supply, are contributing to the increased demand for wastewater treatment on a global scale. One of the innovative water treatment technologies is the adsorptive removal of heavy metals through the application of natural and engineered adsorbents. However, adsorption currently has setbacks that prevent its wider application for heavy metals sequestration from aquatic environments using various adsorbents, including difficulty in selecting suitable desorption eluent to recover adsorbed heavy metals and regeneration techniques to recycle the spent adsorbents for further use and safe disposal. Therefore, the recovery of adsorbed heavy metal ions and the ability to reuse the spent adsorbents is one of the economic and environmental sustainability approaches. This study presents a state-of-the-art critical review of different desorption agents that could be used to retrieve heavy metals and regenerate the spent adsorbents for further adsorption-desorption processes. Additionally, an attempt was made to discuss and summarize some of the independent factors influencing heavy metals desorption, recovery, and adsorbent regeneration. Furthermore, isotherm and kinetic modeling have been summarized to provide insights into the adsorption-desorption mechanisms of heavy metals. Finally, the review provided future perspectives to provide room for researchers and industry players who are interested in heavy metals desorption, recovery, and spent adsorbents recycling to reduce the high cost of adsorbents reproduction, minimize secondary waste generation, and thereby provide substantial economic and environmental benefits.

Sequestration of cyanide ions from aqueous medium by physio-chemically fabricated biochar of peels of banana and grape fruit in ecofriendly way.

Pakistan is an agricultural country producing plenty of fruits, like: mango, banana, apple, peaches, grapes, plums, variety of citrus fruits including lemon, grapefruit, and oranges. So far the peels of most of the fruits are usually wasted and not properly utilized anywhere. In this work, the peels of banana and grapefruit are converted into biochar by slow pyrolysis under controlled supply of air and used for sequestering cyanide ions from aqueous medium after chemical modification with ZnCl2 and sodium dodecyl sulfate (SDS). The modified biochar was characterized by various instrumental techniques, like: SEM, FTIR, TGA, and CHNS. Different parameters, like: time, temperature, pH, and dose of adsorbent affecting the adsorption of cyanide ions, onto prepared biochar were optimized and to understand the adsorption phenomenon, kinetic and thermodynamic studies were performed. Concentration of cyanide ions was estimated by employing standard ion selective electrode system and it is found that Sodium Dodecyl Sulfate treated biochar of banana peels shown more adsorption capacity, i.e.,: 17.080 mg/g as compared to all samples. Present work revealed that the biochar produced from the fruit waste has sufficient potential to eliminate trace quantities of cyanide from water, especially after treatment with sodium dodecyl sulfate.

An industrial area in Asian and African countries where mining is done using traditional techniques is the major cause of cyanide toxicity in wastewater streams. So, here chemically fabricated biochar made by peels of banana and grape fruit is employed for removal of cyanide ion for controlling aquatic pollution using local resources in green way. Favorable results indicated the feasibility of this process, which is cost effective, convenient, ecofriendly, and sustainable.

An overview on the key advantages and limitations of batch and dynamic modes of biosorption of metal ions.

Water purification using adsorption is a crucial process for maintaining human life and preserving the environment. Batch and dynamic adsorption modes are two types of water purification processes that are commonly used in various countries due to their simplicity and feasibility on an industrial scale. However, it is important to understand the advantages and limitations of these two adsorption modes in industrial applications. Also, the possibility of using batch mode in industrial scale was scrutinized, along with the necessity of using dynamic mode in such applications. In addition, the reasons for the necessity of performing batch adsorption studies before starting the treatment on an industrial scale were mentioned and discussed. In fact, this review article attempts to throw light on these subjects by comparing the biosorption efficiency of some metals on utilized biosorbents, using both batch and fixed-bed (column) adsorption modes. The comparison is based on the effectiveness of the two processes and the mechanisms involved in the treatment. Parameters such as biosorption capacity, percentage removal, and isotherm models for both batch and column (fixed bed) studies are compared. The article also explains thermodynamic and kinetic models for batch adsorption and discusses breakthrough evaluations in adsorptive column systems. The review highlights the benefits of using convenient batch-wise biosorption in lab-scale studies and the key advantages of column biosorption in industrial applications.

Microwave-assisted synthesis, characterization and in vitro biomedical applications of Hibiscus rosa-sinensis Linn.-mediated carbon quantum dots.

In recent years, carbon quantum dots (CQDs) have garnered considerable attention as a promising material for biomedical applications because of their unique optical and biological properties. In this study, CQDs were derived from the leaves of Hibiscus rosa-sinensis Linn. via microwave-assisted technique and characterized using different techniques such as ultraviolet-visible, Fourier transform infrared, fluorescence spectrometry, X-ray diffraction, dynamic light scattering, transmission electron microscopy and energy-dispersive X-ray spectroscopy. Subsequently, their potential for biomedical applications was investigated through in vitro assays assessing scratch healing, anti-inflammatory, antibacterial, and cytotoxicity properties. It was found that the CQDs were fluorescent, polycrystalline, quasi-spherical, ~ 12 nm in size with presence of -OH and -COOH groups on their negatively charged surfaces, and demonstrated good anti-inflammatory by inhibiting protein denaturation, cyclooxygenase-2 and regulating inflammatory cytokines. The CQDs also exhibited antimicrobial activity against Klebsiella pneumoniae and Bacillus cereus, good biocompatibility, along with excellent promotion of cell proliferation in vitro, indicating their potential as a anti-inflammatory and wound healing material. The properties were more enhanced than their precursor, H. rosa-sinensis leaf extract. Hence, the CQDs synthesized from the leaves of H. rosa-sinensis can serve as a potential biomedical agent.

Residual phosphorus availability after soil application of different organic waste in varying soil P status soils.

Transformations of applied phosphorus (P) fertilizer to inaccessible residual soil P is the main cause of inadequate P availability to plants in the majority of the cultivated soils. This study investigated the effect of organic wastes (rice-residue biochar, farmyard manure (FYM), poultry manure (PM), green manure (GM), and wheat straw (WS) on residual-P mobilization and its bioavailability in maize crops under different P status soils. Surface soil samples of 'medium-P' (12.5-22.5 kg P ha-1) and 'high-P' (22.5-50.0 kg P ha-1) status soils were collected from a long-term differential P fertilization experiment on maize-wheat rotation and were subjected to examine P adsorption/desorption, phosphatase activity and microbial biomass P (MBP) after incubation with organic amendments of varying elemental composition. The incorporation of organic manures decreases P sorption with maximum decrease in FYM-treated soils, indicating increased P concentration in soil solution. In contrast, WS due to its wider C/P ratio increased P sorption and did not produce any significant impact on the bioavailability of P. High-P status soils witnessed lower P sorption than medium-P soils. The MBP increased in the order of PM > FYM > GM > WS > biochar irrespective of soil P status. The availability and mobility of residual-P with FYM and PM was significantly higher than that of residual-P from biochar, GM and WS. Organics with wider C/P ratio immobilize bioavailable P in the short term regardless of soil P status.

Acid etching post-treatment enhanced fungal sterilization performance of copper-manganese-cerium oxide in liquid and aerosol: Materials and molecular biological mechanisms.

Bioaerosol is one of the main ways to spread respiratory infectious diseases. In order to further improve the sterilization efficiency of copper-manganese-cerium oxide (CuMnCeOx), the post-treatment method based on acid etching was adopted. The results showed that sterilization efficiency of the treated CuMnCeOx could reach 99% in aerosol with space velocity of 1400 h-1. L(+)-ascorbic acid successfully promoted the formation of Cu+, oxygen vacancies and the generation of reactive oxygen species (ROS) on the surface of the treated CuMnCeOx. During sterilization in liquid system, the transcriptome identified 316 differentially expressed genes, including 270 up-regulated genes and 46 down-regulated genes. Differentially expressed genes were significantly enriched in cell wall (GO:0005618) and external encapsulating structure (GO:0030312). Up-regulated genes were shown in regulation of reactive oxygen species biosynthetic processes (GO:1903409, GO:1903426, GO:1903428) and positive regulation all of reactive oxygen species metabolic process (GO:2000379), indicating that ROS induced cell death by destroying cell wall.

Multifaceted Anticancer Potential of Gnidia glauca (Fresen.) Gilg Leaf Alkaloids: Impact on Multiple Cellular Targets.

Gnidia glauca (Fresen.) Gilg has demonstrated significant anticancer potential through multiple mechanisms, including apoptosis induction, as shown by the TUNEL assay against MCF-7 cells, modulation of tubulin polymerization, preservation of mitochondrial function indicated by the JC-1 assay, and inhibition of DNA polymerase α and ß activities. Rationale for the present study is to investigate the potential anticancer properties of G. glauca leaf alkaloid extract. Fresh and healthy G. glauca leaves were cleaned, shade-dried, and the powder was defatted, extracted with 10% acetic acid in ethanol, and subjected for alkaloid extraction. The partially purified G. glauca leaf alkaloid extract was evaluated for its effects on tubulin polymerization, DNA polymerase activity, mitochondrial membrane potential, and apoptosis studies using human breast cancer (MCF-7) cells by flow cytometry. The extract was found to affect microtubule assembly in a concentration-dependent manner (15.125-250 µg/mL), indicating presence of alkaloids that function as spindle poison agents. Leaf alkaloid extract of G. glauca was also found to affect the mitochondrial membrane potential with IC50 value 144.51 µg/mL, and inhibited DNA polymerase α and ß activities dose dependently, thus potentially interfering with DNA replication and repair processes. Leaf alkaloid extract also showed the potential to induce DNA damage of 53.6%, albeit somewhat less than the standard drug camptothecin (64.94%) as confirmed by the TUNEL assay. Additionally, the GgLAE (IC50 144.51 µg/mL) showed significant inhibition of MCF-7 cells proliferation after 24 h, revealing phase arrests in sub G0/G1, S, and G2/M. These findings suggest that G. glauca leaf alkaloid extract contains alkaloids that possess anticancer properties with multiple targets, making the plant a natural source for a promising phytochemical drug candidates for further evaluation in pre-clinical and clinical studies. Further investigations are warranted to determine the efficacy, safety, identification and characterization of the alkaloids, and evaluate and determine their potential applications in cancer therapy.

Hyphenated Fenton-column packed nMnO-modified wood biochar for tannery effluent treatment: Adsorption mechanism and reusability study.

Industrial wastewater contains a wide range of pollutants that, if released directly into natural ecosystems, have the potential to pose serious risks to the environment.This study aims to investigate sustainable and efficient approaches for treating tannery wastewater, employing a combination of hyphenated Fenton oxidation and adsorption processes. Rigorous analyses were conducted on wastewater samples, evaluating parameters like COD, sulphide, NH3-N, PO43-, NO3-, and Cr(VI). The performance of this adsorbent material was gauged through column adsorption experiments. A comprehensive characterization of the adsorbent was undertaken using techniques such as SEM, EDX, BET, FTIR, XRD, and LIBS. The study delved into varying operational parameters like bed depth (ranging from 3.5 to 9.5 cm) diameter (2.5 cm) and influent flow rate (ranging from 5 to 15mLmin-1). The experimental outcomes revealed that increasing the bed depth and decreasing the influent flow rate significantly bolstered the adsorption column's effectiveness. Breakthrough curves obtained were fitted with different models, including the Thomas and Yoon-Nelson models. The most optimal column performance was achieved with a bed height of 10.5 cm and a flow rate of 5mLmin-1. The combined process achieved removal efficiencies of 94.5% for COD, 97.4% for sulphide, 96.2% for NH3-N, 83.1% for NO3-, 79.3% for PO43-, and 96.9% for Cr(VI) in tannery effluent. This research presents a notable stride toward the development of sustainable and efficient strategies for tannery wastewater treatment.

Applications of hollow nanostructures in water treatment considering organic, inorganic, and bacterial pollutants.

One of the major issues of modern society is water contamination with different organic, inorganic, and contaminants bacteria. Finding cost-effective and efficient materials and methods for water treatment and environment remediation is among the scientists' most important considerations. Hollow-structured nanomaterials, including hollow fiber membranes, hollow spheres, hollow nanoboxes, etc., have shown an exciting capability for wastewater refinement approaches, including membrane technology, adsorption, and photocatalytic procedure due to their extremely high specific surface area, high porosity, unique morphology, and low density. Diverse hollow nanostructures could potentially eliminate organic contaminants, including dyes, antibiotics, oil/water emulsions, pesticides, and other phenolic compounds, inorganic pollutants, such as heavy metal ions, salts, phosphate, bromate, and other ions, and bacteria contaminations. Here, a comprehensive overview of hollow nanostructures' fabrication and modification, water contaminant classification, and recent studies in the water treatment field using hollow-structured nanomaterials with a comparative attitude have been provided, indicating the privilege abd detriments of this class of nanomaterials. Eventually, the future outlook of employing hollow nanomaterials in water refinery systems and the upcoming challenges arising in scaling up are also propounded.

Green synthesis and characterization of α-Mn2O3 nanoparticles for antibacterial activity and efficient visible-light photocatalysis.

In this study, green synthesis, characterizations, photocatalytic performance, and antibacterial applications of α-Mn2O3 nanoparticles are reported. The synthesized nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), transmission electron microscope (TEM), Scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), Brunauer Emmett Teller (BET), Electrochemical Impedance Spectroscopy (EIS), Photoluminescence (PL), and Differential reflectance spectroscopy (DRS) analysis. The investigation verified that the α-Mn2O3 nanoparticles possessed a cubic structure, with a crystallite size of 23 nm. The SEM and TEM techniques were used to study the nanoscale morphology of α- Mn2O3 nanoparticles, which were found to be spherical with a size of 30 nm. Moreover, the surface area was obtained as 149.9 m2 g-1 utilizing BET analysis, and the band gap was determined to be 1.98 eV by DRS analysis. The photocatalysis performance of the α-Mn2O3 NPs was evaluated for degrading Eriochrome Black T (EBT) dye under visible light and degradation efficiency was 96% in 90 min. The photodegradation mechanism of EBT dye was clarified with the use of radical scavenger agents, and the degradation pathway was confirmed through Liquid Chromatography-Mass Spectrometry (LC-MS) analysis. Additionally, the produced nanoparticles could be extracted from the solution and continued to exhibit photocatalysis even after five repeated runs under the same optimal conditions. Also, the antibacterial activity of green synthesized α-Mn2O3 nanoparticles was investigated by using the broth microdilution method towards Enterococcus faecalis ATCC 29212 (Gram-positive), Staphylococcus aureus ATCC 29213 (Gram-positive), Salmonella typhimurium ATCC 14028 (Gram-negative), Klebsiella pneumoniae ATCC 7881 (Gram-negative), Escherichia coli ATCC 25922 (Gram-negative), Proteus mirabilis ATCC 7002 (Gram-negative), and Pseudomonas aeruginosa ATCC 27853 (Gram-negative) bacterial strains.

The effect of the number of SO3- groups on the adsorption of anionic dyes by the synthesized hydroxyapatite/Mg-Al LDH nanocomposite.

In this study, a new nanocomposite of hydroxyapatite (HA)/Mg-Al layered double hydroxide (LDH) was successfully formed via a facile co-precipitation method and applied to adsorb three anionic dyes of alizarin red S (ARS), Congo red (CR), and reactive red 120 (RR120) differing in the number of SO3- groups from aqueous solution. Based on a combination of characterization analysis and adsorption experiments, HA/Mg-Al LDH nanocomposite showed better adsorption performance than HA and Mg-Al LDH. Using XRD and TEM analyses, the crystallinity and the presence of nanoparticles were confirmed. According to the SEM investigation, the Mg-Al LDH layers in the nanocomposite structure were delaminated, while HA nanorods were formed at the surface of Mg-Al LDH nanoparticles. The higher BET surface area of the novel HA/Mg-Al LDH nanocomposite compared to HA and Mg-Al LDH provided its superior adsorption performance. Considering an effective amount of adsorbent dosage, pH 5 was selected as the optimum pH for each of the three dye solutions. According to the results from the study of contact time and initial concentration, the pseudo-second-order kinetic (R2 = 0.9987, 0.9951, and 0.9922) and Langmuir isotherm (R2 = 0.9873, 0.9956, and 0.9727) best fitted the data for ARS, CR, and RR120, respectively. Anionic dyes with different numbers of SO3- groups demonstrated distinct adsorption mechanisms for HA and Mg-Al LDH nanoparticles, indicating that the adsorption capacity is influenced by the number of SO3- groups, with HA/Mg-Al LDH nanocomposite offering superior performance toward dyes with higher numbers of SO3- groups. Furthermore, ΔH° less than 40 kJ/mol, positive ΔS°, and negative ΔG° accompanied by the mechanism clarifying show physical spontaneous adsorption without an external source of energy and increase the randomness of the process during the adsorption, respectively. Finally, the regeneration study demonstrated that the nanocomposite could be utilized for multiple adsorption-desorption cycles, proposing the HA/Mg-Al LDH as an economically and environmentally friendly adsorbent in the adsorption of anionic dyes in water treatment processes.

Excess sludge-based biochar loaded with manganese enhances catalytic ozonation efficiency for landfill leachate treatment.

This study developed an efficient and stable landfill leachate treatment process, which was based on the combination of biochar catalytic ozonation and activated sludge technology for intensive treatment of landfill leachate, aiming to achieve the standard discharge of leachate. The focus is to investigate the effect of manganese loading on the physicochemical properties of biochar and the mechanism of its catalytic ozonation. It was found that more surface functional groups (CO, Mn-O, etc.) and defects (ID/IG = 1.27) were exposed via the change of original carbon structure by loading Mn, which is conducive to the generation of lattice oxygen. Meanwhile, generating different valence states of Mn metal can improve the redox properties and electron migration rate, and encourage the production of reactive oxygen species (ROS) during the reaction process and enhance the catalytic efficiency. The synergistic action of microorganisms, especially denitrifying bacteria, was found to play a key role in the degradation of nitrogenous pollutants during the activated sludge process. The concentration of NH+4-N was reduced from the initial 1087.03 ± 9.56 mg/L to 9.05 ± 1.91 mg/L, while COD was reduced from 2290 ± 14.14 mg/L to 86.5 ± 2.12 mg/L, with corresponding removal rates of 99.17% and 99.20%, respectively. This method offers high efficiency and stability, achieving discharge standards for leachate (GB16889-2008). The synergy between Mn-loaded biochar and microorganisms in the activated sludge is key to effective treatment. This study offers a new approach to solving the challenge of waste leachate treatment.

Removal of emergent pollutants: A review on recent updates and future perspectives on polysaccharide-based composites vis-à-vis traditional adsorbents.

There is a growing incidence in the presence of emergent pollutants like the pesticides and pharmaceuticals in water bodies. The matter of environmental concern is their synthetic and persistent nature which has resulted in induced toxicity/damaging effect to the vital functioning of the different organs in the aquatic community. Traditional adsorbents have exhibited limitations like low stability and minimum reuse ability. Composites of such adsorbents with polysaccharides have demonstrated distinct features like improved surface area, porosity, adsorptivity; improved reusability and structural integrity; improved mechanical strength, thermal stability when applied for the removal of the emergent pollutants. The biocompatibility and biodegradability of such fabricated composites is established; thereby making the water treatment process cost effective, sustainable and environmentally friendly. The present review has dealt with an in-depth, up-dated literature compilation of traditional as well as polysaccharide based composite adsorbents and addressed their performance evaluation for the removal of pharmaceuticals and pesticides from wastewater. A comparative study has revealed the merits of polysaccharide based composites and discussions have been made with a focus on future research directions in the related area.

Solvent-free synthesis of foam board-like CoSe2 alloy to selectively generate singlet oxygen via peroxymonosulfate activation for sulfadiazine degradation.

Singlet oxygen (1O2) is a highly effective reactive species in selectively oxidizing organic pollutants. However, it is still challenging to rationally design robust catalysts for the selective generation of 1O2. Herein, the coordination and engineering architecture of the foam board-like CoSe2 alloy were facilely constructed through a green solvent-free method and displayed almost 100% 1O2 production selectivity. The CoSe2 alloy showed excellent catalytic ability for the efficient and fast removal of organic pollutants via peroxymonosulfate (PMS) activation compared with previously reported cobalt-based catalysts. The CoSe2/PMS system exhibited strong resistance for a broad pH range (3.0-11.0) and various coexisting inorganic ions owing to the advantage of the strong bonding of Co-Se in CoSe2 alloy. Mechanism studies revealed that 1O2 was the only reactive oxygen species in the CoSe2/PMS system. Theoretical calculations demonstrated that Co was the dominant adsorption site for PMS in CoSe2, and the production pathway of 1O2 was PMS* â†’ *OH → *O → 1O2. In addition, it was proved that *OH and *O served as the rate-determining steps for the formation of 1O2 by PMS activation on CoSe2 alloy. These findings provide a rational strategy for preparing a series of low-cost transition metal-based alloy catalysts for PMS activation to achieve high-efficiency 1O2 production in the elimination of organic pollutants.

Progress in layered double hydroxides (LDHs): Synthesis and application in adsorption, catalysis and photoreduction.

Layered double hydroxides (LDHs), also known as anionic clays, have attracted significant attention in energy and environmental applications due to their exceptional physicochemical properties. These materials possess a unique structure with surface hydroxyl groups, tunable properties, and high stability, making them highly desirable. In this review, the synthesis and functionalization of LDHs have been explored including co-precipitation and hydrothermal methods. Furthermore, extensive research on LDH application in toxic pollutant removal has shown that modifying or functionalizing LDHs using materials such as activated carbon, polymers, and inorganics is crucial for achieving efficient pollutant adsorption, improved cyclic performance, as well as effective catalytic oxidation of organics and photoreduction. This study offers a comprehensive overview of the progress made in the field of LDHs and LDH-based composites for water and wastewater treatment. It critically discusses and explains both direct and indirect synthesis and modification techniques, highlighting their advantages and disadvantages. Additionally, this review critically discusses and explains the potential of LDH-based composites as absorbents. Importantly, it focuses on the capability of LDH and LDH-based composites in heterogeneous catalysis, including the Fenton reaction, Fenton-like reactions, photocatalysis, and photoreduction, for the removal of organic dyes, organic micropollutants, and heavy metals. The mechanisms involved in pollutant removal, such as adsorption, electrostatic interaction, complexation, and degradation, are thoroughly explained. Finally, this study outlines future research directions in the field.

Health risks assessment and source admeasurement of potentially dangerous heavy metals (Cu, Fe, and Ni) in rapidly growing urban settlement.

Environmental contamination is a global challenge that impacts every aspect of ecosystem. The contaminants from anthropogenic or industrial trash continually recirculate into the environment, agricultural land, plants, livestock, and ultimately into humans by way of the food chain. After an increase in human and farmland animal deaths from illnesses due to contaminated drinking water, toxic metal water poisoning has remained a global concern. Diverse environmental and enforcement organisations have attempted to regulate the activities that serve as precursors to these heavy metals which have been proven ineffective. These unnecessary metals have severely hampered most biological processes. The presence of hazardous metals, which are harmful at extremely high levels and have a negative effect on the health of living bodies generally degrades the nutritional value of water. In order to evaluate the heavy metals (Cu, Ni, and Fe) toxicity of groundwater in pri-urban areas, the current study was conducted that have been considered as advance solution to tackle climate change which influence coastal ecosystem. Additionally, the impacts of soil and plant (spinach and brassica) contamination from groundwater were evaluated. The heavy metals were examined in the soil and groundwater samples (Pb, Fe and Ni). While Fe concentrations in water samples were found to be high as 1.978 mg/L as compared to Ni and Cu values low. According to WHO guidelines, the mean value of Fe exceeds the limit value. Similarly, Cu had a higher mean value (0.7 mg/L) in soil samples than other metals (Ni and Fe). In comparison to Ni and Cu, the Fe concentrations in spinach and brassica plants samples are greater, at 17.2 mg/L and 3.22 mg/L, respectively. The possible effects of metal poisoning of groundwater and plants on human health have been assessed using the Hazard Quotient (HQ), Evaluated Daily Intake (EDI), and Incremental Life Time Cancer Risk formulas (ILTCR). When drinking Ni-contaminated water, humans are more at risk of developing cancer (0.0031) than Fe and Cu. Metal concentrations in water and brassica showed substantially more scattered behaviour on the plot and no meaningful relationship, although PCA and masked matrix correlation showed a fair association between Ni and Cu in brassica (r2: 0.46) and Fe and Ni in spinach (r2: 0.31). According to the study's findings, it is anticipated that special management and groundwater monitoring will be needed in the examined area to reduce the health risks related to drinking water that has been contaminated with metals.