Comparative transcriptome profile of embryos at different developmental stages derived from somatic cell nuclear transfer (SCNT) and in-vitro fertilization (IVF) in riverine buffalo (Bubalus bubalis).

Somatic cell nuclear transfer (SCNT) is a very important reproductive technology with many diverse applications, such as fast multiplication of elite animals, the production of transgenic animals and embryonic stem (ES) cells. However, low cloning efficiency, a low live birth rate and the abnormally high incidence of abnormalities in the offspring born are attributed to incomplete or aberrant nuclear reprogramming. In SCNT embryos, the aberrant expression pattern of the genes throughout embryonic development is responsible for the incomplete nuclear reprogramming. The present study was carried out to identify the differential gene expression (DEGs) profile and molecular pathways of the SCNT and IVF embryos at different developmental stages (2 cell, 8 cell and blastocyst stages). In the present study, 1164 (2 cell), 1004 (8 cell) and 530 (blastocyst stage) DEGs were identified in the SCNT embryos as compared to IVF embryos. In addition, several genes such as ZEB1, GDF1, HSF5, PDE3B, VIM, TNNC, HSD3B1, TAGLN, ITGA4 and AGMAT were affecting the development of SCNT embryos as compared to IVF embryos. Further, Gene Ontology (GO) and molecular pathways analysis suggested, SCNT embryos exhibit variations compared to their IVF counterparts and affected the development of embryos throughout the different developmental stages. Apart from this, q-PCR analysis of the GDF1, TMEM114, and IGSF22 genes were utilized to validate the RNA-seq data. These findings contribute valuable insights about the different genes and molecular pathways underlying SCNT embryo development and offer crucial information for improving SCNT efficiency.

The Role of Satellites in the Evolution of Begomoviruses.

Begomoviruses have emerged as destructive pathogens of crops, particularly in the tropics and subtropics, causing enormous economic losses and threatening food security. Epidemics caused by begomoviruses have even spread in regions and crops that were previously free from these viruses. The most seriously affected crops include cassava; cotton; grain legumes; and cucurbitaceous, malvaceous, and solanaceous vegetables. Alphasatellites, betasatellites, and deltasatellites are associated with the diseases caused by begomoviruses, but begomovirus-betasatellite complexes have played significant roles in the evolution of begomoviruses, causing widespread epidemics in many economically important crops throughout the world. This article provides an overview of the evolution, distribution, and approaches used by betasatellites in the suppression of host plant defense responses and increasing disease severity.

Skeletal muscle transcriptomics of sheep acclimated to cold desert and tropical regions identifies genes and pathways accentuating their diversity.

The current study attempts to investigate the differences in gene expression in longissimus thoracis muscles between sheep breeds acclimated to diverse environments. Changthangi sheep inhabits the cold arid plateau of Ladakh, at an altitude above 3000 m with prevalence of rarefied atmosphere. Muzzafarnagri sheep, on the other hand is found in the sub-tropical hot and humid plains at an altitude of about 250 m. Comparative transcriptomics was used to provide a molecular perspective of the differential adaptation of the two breeds. RNA sequencing data was generated from four biological replicates of the longissimus thoracis muscles from both breeds. The common genes expressed in both breeds were involved in muscle contraction and muscle fibre organization. The most significant pathways enriched in Changthangi muscles were glycogen metabolism, reduction of cytosolic Ca++ levels and NFE2L2 regulating anti-oxidant, while those in Muzzafarnagri were extracellular matrix organization and collagen formation. The hub genes identified in Changthangi were involved in hematopoiesis and HIF signaling pathway, suggesting the molecular acclimatization of Changthangi to the high altitude cold desert of Ladakh. The nodal genes discovered in Muzzafarnagri sheep were associated with the extracellular matrix which accentuates its significance in the development, growth and repair of muscles. The observed transcriptomic differences underscore the morphological and adaptive disparity between the two breeds. The candidate genes and pathways identified in this study will form the basis for future research on adaptation to high altitude and body size in small ruminants.

Ecological weed management and square planting influenced the weed management, and crop productivity in direct-seeded rice.

Herbicide use may pose a risk of environmental pollution or evolution of resistant weeds. As a result, an experiment was carried out to assess the influence of different non-chemical weed management tactics (one hoeing (HH) at 12 DAS followed by (fb) one hand weeding at 30 DAS, one HH at 12 DAS fb Sesbania co-culture and its mulching, one HH at 12 DAS fb rice straw mulching @ 4t ha-1, one HH at 12 DAS fb rice straw mulching @ 6 t ha-1) on weed control, crop growth and yield, and economic returns in direct-seeded rice (DSR). Experiment was conducted during kharif season in a split-plot design and replicated thrice. Zero-till seed drill-sown crop (PN) had the lowest weed density at 25 days after sowing (DAS), while square planting geometry (PS) had the lowest weed density at 60 DAS. PS also resulted in a lower weed management index (WMI), agronomic management index (AMI), and integrated weed management index (IWMI), as well as higher growth attributes, grain yield (4.19 t ha-1), and net return (620.98 US$ ha-1). The cultivar Arize 6444 significantly reduced weed density and recorded higher growth attributes, yield, and economic return. In the case of weed management treatments, one HH at 12 DAS fb Sesbania co-culture and its mulching had the lowest weed density, Shannon-weinner index and eveness at 25 DAS. However, one hoeing at 12 DAS fb one hand weeding at 30 DAS (HH + WH) achieved the highest grain yield (4.85 t ha-1) and net returns (851.03 US$ ha-1) as well as the lowest weed density at 60 DAS. PS × HH + WH treatment combination had the lowest weed persistent index (WPI), WMI, AMI, and IWMI, and the highest growth attributes, production efficiency, and economic return.

Technical NEMA NU2-2018 Performance Assessment of Time-of-Flight-Integrated Digital PET-CT System.

Aim The objective of this study includes the NEMA (National Electrical Manufacturer Association) NU2-2018 performance evaluation of the uMIvista PET-CT (positron emission tomography-computed tomography) system. Methods The latest NEMA NU2-2018 guidelines have been followed for the evaluation of performance parameters of this PET-CT scanner: axial, tangential, and radial spatial resolution, sensitivity, counting losses, scatter, randomness, random and counting loss correction, image quality, time and energy resolution, image uniformity, and image registration alignment post installation of country first uMIvista PET-CT. Results The measured NEMA sensitivity of the uMIvista PET scanner was 12.053 cps/kBq. The spatial resolutions of the PET were measured as tangential, radial, and transaxial spatial resolutions at 10 mm, with 3.01 mm, 2.95 mm, and 2.93 mm, respectively; at 100 mm, with 3.17 mm, 3.42 mm, and 3.05 mm, respectively; and at 200 mm, with 3.65 mm, 4.54 mm, and 3.17 mm, respectively, at full-width half-maximum (FWHM); while at full-width tenths-maximum (FWTM), the values at 10 mm were 5.79 mm, 5.57 mm, and 5.69 mm, respectively, and at 100 mm were 5.59 mm, 5.96 mm, and 5.91 mm, respectively. The measured time-of-flight (TOF) timing resolution was 302.294 ps and the measured energy resolution was 11.76% with FWHM and FWTM. Conclusion The NEMA NU2-2018 performances of this TOF-integrated digital PET-CT system are extremely good in all parameters.

Molecular insights into Pashmina fiber production: comparative skin transcriptomic analysis of Changthangi goats and sheep.

Ladakh, one of the highest inhabited regions globally, hosts the unique Changthangi goat, renowned for producing Pashmina, the world's most luxurious natural fiber. In comparison, the fiber derived from Changthangi sheep is considered next only to Pashmina. This research endeavors to compare the skin transcriptome profiles of Changthangi goats and Changthangi sheep, aiming to discern the molecular determinants behind the recognition of Changthangi goats as the source of Pashmina. Drawing upon previously conducted studies, a collective of 225 genes correlated with fiber characteristics were extracted from the differentially expressed genes noticed between the two species (p-value of ≤ 0.05 and a log2 fold change of ≥ 1.5). These genes were analyzed using DAVID software to understand their biological functions and to identify enriched KEGG and Reactome pathways. The protein-protein interaction networks were constructed using Cytoscape, cytoHubba, and STRING to focus on key genes and infer their biological significance. Comparative transcriptome analysis revealed significantly higher expression of genes involved in signaling pathways like Wnt, MAPK, PI3K-Akt, Hedgehog, associated with fiber development and quality in Changthangi goats. These pathways play crucial roles in hair follicle (HF) formation, maintenance of epidermal stem cells, and fiber characteristics. Findings also highlight the enrichment of cell adhesion molecules and ECM-receptor interaction, emphasizing their roles in HF structure, growth, and signaling. This investigation offers an in-depth understanding of the molecular intricacies governing Pashmina production in Changthangi goats, providing valuable insights into their unique genetic makeup and underlying mechanisms influencing the exceptional quality of Pashmina fibers.

Comprehensive evaluation and validation of optimal reference genes for normalization of qPCR data in different caprine tissues.

BACKGROUND: Quantitative real-time PCR (qPCR) is a highly reliable method for validating gene expression data in molecular studies due to its sensitivity, specificity, and efficiency. To ensure accurate qPCR results, it's essential to normalize the expression data using stable reference genes. METHODS: This study aimed to identify suitable reference genes for qPCR studies in goats by evaluating 18 candidate reference genes (ACTB, BACH1, B2M, GAPDH, HMBS, HPRT1, PGK1, PPIA, PPIB, RPLP0, RPL19, RPS9, RPS15, RPS28, SDHA, TBP, UXT, and YWHAZ) in 10 different caprine tissues (heart, intestine, kidney, liver, lung, muscle, rumen, skin, spleen, and testis). An integrated tool called RefFinder, which incorporates various algorithms like NormFinder, GeNorm, BestKeeper, and ΔCt, was used to assess the stability of expression among these genes. RESULTS: After thorough analysis, ACTB, PPIB, and B2M emerged as the most stable reference genes, while RPL19, RPS15, and RPS9 were found to be the least stable. The suitability of the selected internal control genes was further validated through target gene analysis, confirming their efficacy in ensuring accurate gene expression profiling in goats. CONCLUSION: The study determined that the geometric average of ACTB, PPIB, and B2M creates an appropriate normalization factor for gene expression studies in goat tissues.

Harnessing two-dimensional nanomaterials for diagnosis and therapy in neurodegenerative diseases: Advances, challenges and prospects.

Neurodegenerative diseases (NDDs) are specific brain disorders characterized by the progressive deterioration of different motor activities as well as several cognitive functions. Current conventional therapeutic options for NDDs are limited in addressing underlying causes, delivering drugs to specific neuronal targets, and promoting tissue repair following brain injury. Due to the paucity of plausible theranostic options for NDDs, nanobiotechnology has emerged as a promising field, offering an interdisciplinary approach to create nanomaterials with high diagnostic and therapeutic efficacy for these diseases. Recently, two-dimensional nanomaterials (2D-NMs) have gained significant attention in biomedical and pharmaceutical applications due to their precise drug-loading capabilities, controlled release mechanisms, enhanced stability, improved biodegradability, and reduced cell toxicity. Although various studies have explored the diagnostic and therapeutic potential of different nanomaterials in NDDs, there is a lack of comprehensive review addressing the theranostic applications of 2D-NMs in these neuronal disorders. Therefore, this concise review aims to provide a state-of-the-art understanding of the need for these ultrathin 2D-NMs and their potential applications in biosensing and bioimaging, targeted drug delivery, tissue engineering, and regenerative medicine for NDDs.

Facile exfoliation and physicochemical characterization of Thespesia populnea plant leaves based bioplasticizer macromolecules reinforced with polylactic acid biofilms for packaging applications.

Plasticizers are active ingredients added to the polymer to increase its workability. Since synthetic plasticizer is not ecofriendly and toxic in nature, it is a real cause for concern. On this basis, our study focuses on plasticizer extraction from plant-based resources. In this research work, Thespesia populnea leaves are utilized for the isolation of biological macromolecules with a plasticizing effect for biofilm applications. This extraction process is done through solvent extraction, amination, slow pyrolysis, and surface catalysis process. The physico-chemical and microstructural characterization of novel plasticizer particles were studied for the first time. The lower crystallinity index and crystalline size obtained from X-ray diffraction is 50.08 % and 20.45 nm respectively. Energy dispersive spectroscopy, particle sizer analysis, atomic force microscopy, and scanning electron microscopy are used to assess surface morphology of this plasticizer. The thermogram and differential thermal analysis curves give the information about degradation behavior of plasticizers and their thermal stability. The glass transition temperature of the extracted plasticizer is 60.56 °C. The plasticizing effect of the plasticizer is studied through film fabrication of polylactic acid which was blended with the extracted plasticizer. The mechanical property of biofilm was improved with the addition of plasticizer. The elongation break percentage (for 5 % plasticizer 46.12 %) was increased compared to others with moderate tensile strength. However, the tensile and elongation modulus decreases with the increase of plasticizer content. The crystallinity of the PLA film was improved after the plasticization. The thermal stability also increased with 3 % addition of the plasticizer. The isolated plasticizer was soluble in water and its molecular weight ≈380.

Impact of general incidence function on three-strain SEIAR model.

We investigate the behavior of a complex three-strain model with a generalized incidence rate. The incidence rate is an essential aspect of the model as it determines the number of new infections emerging. The mathematical model comprises thirteen nonlinear ordinary differential equations with susceptible, exposed, symptomatic, asymptomatic and recovered compartments. The model is well-posed and verified through existence, positivity and boundedness. Eight equilibria comprise a disease-free equilibria and seven endemic equilibrium points following the existence of three strains. The basic reproduction numbers $ \mathfrak{R}_{01} $, $ \mathfrak{R}_{02} $ and $ \mathfrak{R}_{03} $ represent the dominance of strain 1, strain 2 and strain 3 in the environment for new strain emergence. The model establishes local stability at a disease-free equilibrium point. Numerical simulations endorse the impact of general incidence rates, including bi-linear, saturated, Beddington DeAngelis, non-monotone and Crowley Martin incidence rates.

Operational and Performance Experience with uMI550 Digital PET-CT during Routine Quality Control Procedures.

Introduction The quality control (QC) procedures for positron emission tomography (PET) scanners are covered by National Electrical Manufacturers Association and International Electrotechnical Commission. QC must be carried out at regular intervals according to the specifications of the scanner manufacturer. Daily and weekly QC plays a valuable role in monitoring positron emission tomography (PET) scanner performance changes. This study shares operational and performance experience of QC procedures that do not require a radioactive Ge-68 source to perform daily QC and experience with fluorodeoxyglucose F18 ( 18 F-FDG) as a substitute for germanium-68/sodium-22 (Ge-68/Na-22) source for weekly QC. Method This study was performed on an uMI550 digital positron emission tomography-computed tomography (PET-CT) scanner. In this scanner daily QC checks system temperature and humidity, system count rate, data link status, and voltage. QC was performed at the console control, the position of the scanner table was in the home position pulled out from the gantry, and the room was closed during the quick QC. Weekly full QC check items include look-up table drift, energy drift, time-of-flight status, C-map status, temperature and humidity, and voltage. Weekly full QC was performed with a 18 F-FDG source in a rod phantom source. Results Over 200 daily QC tests without a radioactive source Ge-68 phantom and 50 full weekly QC tests using a 18 F-FDG rod phantom were performed with this scanner according to the manufacturer's instructions and a test report was generated. No daily QC errors or warnings were observed during this period. Conclusion The new approach for the daily PET QC does not expose operators to radiation. This translates into commercial and operational merits with consistent performance and results. Implications for Practice Reduction in radiation exposure to operating staff during QC procedure in PET-CT scanner.

Sequence characterization and comparative expression profile of buffalo WNT10B gene in adult and fetal tissues.

In this study, Wingless-type MMTV (mouse mammary tumor virus) integration site family member (WNT10B) gene was sequence characterized in the Indian water buffalo. Sequence analysis revealed an open reading frame of 1176 nucleotides in buffalo, encoding 391 amino acids long protein. Nineteen nucleotide variations were observed between cattle and buffalo resulting in six amino acid changes. Phylogenetic analysis showed the clustering of ruminant species together. Real-time expression analysis of WNT10B in tissues collected from different organs of fetal and adult buffalo, revealed, the gene being abundantly expressed in the rumen and liver of the fetus. The fetal ovary, heart, kidney, lung, testis and mammary gland showed moderate expression, while in adult tissues, expression was high in the ovary, testis, brain, kidney, small intestine and liver, whereas lower expression was observed in the adult rumen. Significant differences in WNT10B expression levels were found for the brain, small intestine, testes, kidney, heart, rumen, and ovary when adult and fetal tissues were compared. A moderate level of genetic variation was found between cattle and buffalo WNT10B and expression patterns in a variety of tissues in adult buffalo implies that in addition to possible roles in adipogenesis and hematopoiesis, the WNT10B gene might be playing a significant role in other regulatory pathways as well.

Cutaneous Adnexal Tumours: A Study of 395 Cases from a Tertiary Care Hospital.

Background: Cutaneous adnexal tumours (CATs) are one of the commonest clinical presentations in dermatology outpatients. They constitute a subset of skin tumours with a common clinical presentation and variable histological findings. Almost all of them clinically present as a subcutaneous nodule. Depending upon the site and distribution, the clinician can suspect the diagnosis. However, histopathological examination is the gold standard for the definitive diagnosis and proper subtyping of CATs. Aims: The present study is conducted to see the overall spectrum, incidence and distribution of CATs in a large cohort at the tertiary care centre with their clinical profile. Methods: This was a retrospective study in which all the CATs diagnosed over a period of 5 years (2015 to 2019) in a tertiary care hospital were studied. Clinical data were recorded from the histopathology requisition forms. Results: Three hundred and ninety-five cases of CATs were retrieved. Approximately 90% of cases were benign and 10% were malignant. The age of presentation ranged from 8 months to 81 years with male preponderance in all the histological subtypes. The most common site was the head and neck followed by the extremities. Morphologically, the maximum cases showed a differentiation towards sweat glands (44%), followed by sebaceous (29%), follicular (26.5%) and apocrine differentiation (5.3%). Malignant tumours were common in the elderly age group with sebaceous carcinoma being the commonest. Conclusion: CATs comprise of a wide spectrum of tumours occurring in all age groups. Malignant CATs are rare and common in older age groups. Histopathological examination is the gold standard in distinguishing between the different subtypes.

Production of MSTN Gene-Edited Embryos of Buffalo Using the CRISPR/Cas9 System and SCNT.

The clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 system and somatic cell nuclear transfer (SCNT) have been used to produce genome-edited farm animal species for improved production and health traits; however, these tools are rarely used in the buffalo and can play a pivotal role in milk and meat production in tropical and subtropical countries. In this study, we aimed to produce myostatin (MSTN) gene-edited embryos of the Murrah buffalo using the CRISPR/Cas9 system and SCNT. For this, fibroblast cells were electroporated with sgRNAs carrying all-in-one CRISPR/Cas9 plasmids targeting the first exon of the MSTN gene. Following puromycin selection, single-cell clonal populations were established and screened using the TA cloning and Sanger sequencing methods. Of eight single-cell clonal populations, one with a monoallelic and another with a biallelic heterozygous gene editing event were identified. These two gene-edited clonal cell populations were successfully used to produce blastocyst-stage embryos using the handmade cloning method. This work establishes the technical foundation for generation of genome-edited cloned embryos in the buffalo.

ISP good clinical practice recommendations for gum care.

Oral health is vital for the general well-being, overall body health and the quality of life throughout our lifetime. Most of the oral diseases and conditions are largely related to the maintenance of oral hygiene, lacking that people suffer from diverse oral diseases at different times in their life. With greater life expectancy, the individuals have teeth involved with periodontal diseases that would not only require professional care but also home gum care for them to last a lifetime. Indian Society of Periodontology (ISP) has recognized the need for systematic documents to update everyday clinical practice of general dental practitioners and have provided evidence-based consensus documents, namely good clinical practice recommendations from time to time to raise the oral health-related awareness and standards of oral healthcare delivery across the country. The current set of clinical practice recommendations focused to "Gum Care for All", is aimed at emphasizing and enhancing the awareness regarding oral health promotion, maintenance, and disease prevention. Twenty-five subject matter experts from across the nation, prepared these recommendations after a thorough literature review and group discussions. The document has been prepared in three distinct sections, namely pretherapeutic, therapeutic, and post therapeutic, to provide guidance during the respective phases of patient management and may serve as a quick and concise reference to the readers. The guidelines shall provide the distinct definitions, signs and symptoms, treatment required; recall visit specifications for plausible clinical case situations, home care advice regarding maintenance of oral hygiene including information on brushing technique, care and change of brush, use of interdental aids, and mouthwashes, etc. The document should advocate and guide the combined efforts of general dentists, and the population at large toward an empowered, evidence based, integrated, and comprehensive oral health care, which shall enhance the healthful functioning and longevity of the dentition and general health of the individual.

MeDIP-sequencing for profiling global DNA methylation in buffalo embryos produced by in vitro fertilization.

Assisted reproductive technique like in vitro fertilization has contributed immensely in producing genetically improved livestock. Production of embryos under in vitro conditions can affect global DNA methylation pattern during the course of embryonic development. The present study is aimed at the generation and comparison of global DNA methylome of embryos at 2-cell, 8-cell and blastocyst stage of buffalo embryos produced by in vitro fertilization using MeDIP-Sequencing. It is observed that there is a profound difference in the global DNA methylation profile of IVF embryos at different developmental stages. These differences are manifested throughout the course of embryonic development. Pathways like Wnt signaling pathway, gonadotropin-releasing hormone receptor pathway and integrin signaling were found to be majorly affected by hypermethylation of DNA in IVF embryos throughout the development.

Geospatial technology in agroforestry: status, prospects, and constraints.

Agroforestry has an indispensable role in food and livelihood security in addition to its capacity to combat the detrimental effects of climate change. However, agroforestry has not been properly promoted and exploited due to lack of precise extent, geographical distribution, and carbon sequestration (CS) assessment. The recent advent of geospatial technologies, as well as free availability of spatial data and software, can provide new insights into agroforestry resources assessment, decision-making, and policy development despite agroforestry's small spatial extent, isolated nature, and higher structural and functional complexity of agroforestry. In this review, the existing application of geospatial technologies together with its constraints and limitations as well as the potential future application for agroforestry has been discussed. The review reveals that the application of optical remote sensing in agroforestry includes spatial extent mapping, production of tree species spectral signature, CS assessment, and suitability mapping. Simultaneously, the recent surge in the use of synthetic aperture radar in conjunction with algorithms based on vegetation photosynthesis and optical data enables a more accurate estimation of gross primary productivity at different scales. However, unmanned aerial vehicles equipped with sensors, such as multispectral, LiDAR, hyperspectral, and thermal, offer a considerably higher potential and accuracy than satellite-based datasets. In the future, the health monitoring of agroforestry systems can be a key concern that may be addressed by utilizing hyperspectral and thermal datasets to analyze plant biochemistry, chlorophyll fluorescence, and water stress. Additionally, current (GEDI, ECOSTRESS) and future space agency missions (BIOMASS, FLEX, NISAR, TRISHNA) have enormous potential to shed fresh light on agroforestry systems.

A cost effective method for the preparation of sodium fluoride [18F]NaF for PET-CT imaging by using an in-house designed module.

We report the development of a manual module for the preparation of [18F]NaF for metastatic bone cancer imaging. By using this simple module, [18F]NaF production can be carried out inexpensively without using commercially available kits. The module can be used for making [18F]NaF from freshly irradiated H218O water or with left over activity in the target after [18F]FDG production. The product meets all quality control parameters.

Prokaryotic ncRNAs: Master regulators of gene expression.

ncRNA plays a very pivotal role in various biological activities ranging from gene regulation to controlling important developmental networks. It is imperative to note that this small molecule is not only present in all three domains of cellular life, but is an important modulator of gene regulation too in all these domains. In this review, we discussed various aspects of ncRNA biology, especially their role in bacteria. The last two decades of scientific research have proved that this molecule plays an important role in the modulation of various regulatory pathways in bacteria including the adaptive immune system and gene regulation. It is also very surprising to note that this small molecule is also employed in various processes related to the pathogenicity of virulent microorganisms.

Assessment of insertion force for the placement of cortical implants in various anatomic sites in dried human skulls.

Background: Dental implant treatment is an excellent option for prosthetic restoration that is associated with high success rates. Implant stability is essential for a good outcome. The basal bone implants are usually placed in poorly atrophied basal bone areas. Aims: To determine the stability during insertion in bones by measuring the torque using a wrench. To obtain the number of cortical engagements via stimulating concerned anatomical location in jaws. Settings and Design: The study was designed as an ex vivo study. In case of basal implants, the integration of the implants is in stable cortex. Such a stable engagement is achieved by stimulation of certain areas in anterior maxilla such as anterior nasal spine, nasal floor, canine fossa, while posteriorly, maxillary tuberosity and pterygoid. In mandible the symphysis, parasymphysis, lingual cortex and retromolar pad areas were engaged. Materials and Methods: In this study, the above-mentioned areas were stimulated for the engagement of cortical bones using cortical implantology. Cortical implants of various sizes and tapers were inserted and analyzed for its bone quality and quantity. The stability of such implants was tested during insertion by measuring the torque with the use of a torque wrench instrument. Statistical Analysis Used: Comparative observational study using standards of deviation. Results and Conclusions: Within the limitations of this study, it may be concluded that there was a significant correlation between insertion force and diameter of implants when placed in jaws in a dried human skull model. The present study needs to be further conducted to establish the observational results completely and hence correlate the results with human studies.