Micro-CT analysis and leakage of bioceramic retrofillings after ultrasonic and Er:YAG laser cavity preparations: an in vitro study.

The purpose of the study was to determine the influence of preparation techniques on marginal adaptation and sealing of Biodentine™ and TotalFill® RRM bioceramic retrograde fillings. Fifty-two single-root teeth extracted for periodontal reasons were used. Root canals were instrumented using Reciproc Blue #25 and obturated using a single cone technique with an AH Plus® root canal sealer. Retrograde cavities were prepared with Piezomed device (Piezo), Er:YAG laser in short-pulse(SP) and quantum square pulse(QSP) modes and filled with Biodentine™ (BD) or TotalFill® RRM (TF). There were 6 groups (n=8): (1) Piezo BD, (2) Piezo TF, (3) SP BD, (4) SP TF, (5) QSP BD, and (6) QSP TF, and positive and negative controls (n=2). Micro-CT analysis was performed on two samples from each group. Percentage volumes of internal and external voids in apical 1.5 mm were determined. Rhodamine B dye leakage was done on six samples. The samples were cut longitudinally and examined under a stereomicroscope. Digital recordings were analyzed in ImageJ software. The deepest penetration of color in mm was recorded. The data were statistically analyzed using ANOVA and Duncan's test at the level of significance α=0.05. TotalFill® RRM performed significantly better than Biodentine™ in terms of sealing (p<0.05) and marginal adaptation, as evaluated by micro-CT. Sealing was significantly better in SP compared to QSP mode preparations (p<0.05). Differences between Piezomed and laser modes were not significantly different (p>0.05). Sealing was statistically significantly better with TotalFill® RRM compared to Biodentine™ and in Er:YAG SP preparations compared to Er:YAG QSP.

Efficacy of Shock Wave-Enhanced Emission Photoacoustic Streaming (SWEEPS) in the Removal of Different Combinations of Sealers Used with Two Obturation Techniques: A Micro-CT Study.

This study sought to evaluate the efficacy of SWEEPS in the removal of epoxy-resin-based and calcium-silicate-containing endodontic sealer combined with single-cone and carrier-based obturation techniques through a micro-CT analysis. Seventy-six single-rooted extracted human teeth with single root canal were instrumented with Reciproc instruments. Specimens were randomly divided into four groups (n = 19) according to the root canal filling material and obturation technique: (1) AH Plus sealer + Reciproc gutta-percha, (2) TotalFill BC sealer + TotalFill BC Points, (3) AH Plus sealer + Guttafusion obturator, and (4) MTA Fillapex + Guttafusion obturator. All specimens were re-treated one week later using Reciproc instruments. Following re-treatment, root canals were additionally irrigated using the Auto SWEEPS modality. The differences in the root canal filling remnants were analyzed by micro-CT scanning of each tooth after root canal obturation, after re-treatment, and after additional SWEEPS treatment. Statistical analysis was performed using an analysis of variance (p < 0.05). The additional treatment with SWEEPS significantly reduced the volume of the root canal filling materials in all experimental groups compared to the removal of root canal filling using only reciprocating instruments (p < 0.05). However, the root canal filling was not removed completely from any of the samples. SWEEPS can be used to enhance the removal of both epoxy-resin-based and calcium-silicate-containing sealers, in combination with single-cone and carrier-based obturation techniques.

Efficacy of Reciprocating Instruments in the Removal of Bioceramic and Epoxy Resin-Based Sealers: Micro-CT Analysis.

The objective of this study was to evaluate the efficacy of reciprocating instruments in the removal of bioceramic and epoxy resin-based sealers using micro-CT analysis. Root canals of 40 extracted human teeth were instrumented with a size R25 Reciproc instrument. Specimens were randomly divided into two groups (n = 20) according to the root canal filling material. In the first group, root canals were obturated with AH Plus sealer and Reciproc R25 gutta-percha. In the second group, a combination of bioceramic gutta-percha (TotalFill BC) and bioceramic sealer (TotalFill BC) was used. After one week, the retreatment of all specimens was performed using Reciproc instruments. To analyze the differences in the filling remnants, specimens were scanned in a micro-CT device after obturation and after the retreatment procedure. Statistical analysis was performed using the Mann-Whitney U test (p < 0.05). A combination of bioceramic sealer and bioceramic gutta-percha was more effectively removed from canals using a reciprocating instrument, with a filling remnants volume of 4.01 ± 3.13 mm3, in comparison to the combination of epoxy resin-based sealer and gutta-percha (6.96 ± 2.70 mm3) (p < 0.05). A reciprocating instrument was more effective in removing bioceramic sealers than epoxy resin-based sealers, although none of the root canal filling materials were completely removed from the root canals.

Comparison of apical irrigant solution extrusion among conventional and laser-activated endodontic irrigation.

The aim of this study was to determine the amount of extruded endodontic irrigant among needle-syringe irrigation (NSI) and laser-activated irrigation (LAI) regimens. Twenty extracted maxillary central incisors were prepared utilizing GT professional rotary files (size 40, taper 0.06). Irrigation was performed with two 27 G irrigation needles (notched open ended (ON) and single side vented (SV)) each at two different irrigant volumetric flow rates (VFR)-0.05 ml/s (3 ml/min) and 0.10 ml/s (6 ml/min). LAI was performed with Er:YAG (erbium-doped yttrium aluminum garnet) using different fiber types (X-Pulse-14/400 cylindrical tip, Preciso- 14/300 flat cylindrical tip, PIPS- 14/400 quartz tapered tip). The Er:YAG laser with a wavelength of 2940 nm (Lightwalker AT, Fotona, Ljubljana, Slovenia) was used according to the following protocol: 10 mJ per pulse, 15 Hz, pulse duration 50 µs. Irrigation time was 60 s for all protocols. Precision syringe pump (PSP) maintained constant irrigant volumetric flow rate. Apically extruded irrigant was collected and net weighed for each protocol (N = 10). Data were analyzed by t tests and Kruskal-Wallis. All LAI regimens had statistically significant lower irrigant extrusion compared with NSI except for the SV 27 G needle used with 0.05 ml/s VFR when compared with the Preciso fiber tip (p = 0,230). The largest amount of extruded irrigant was with the ON 27 G needle at the 0.10 ml/s VFR, while the smallest was after LAI with PIPS fiber tip. The lower quantity of apically extruded irrigant during LAI (X-Pulse and PIPS) points out a safer endodontic irrigation method compared with conventional irrigations.

The efficacy of photon-initiated photoacoustic streaming in the removal of calcium silicate-based filling remnants from the root canal after rotary retreatment.

The aim of the study was to evaluate the efficacy of photon-initiated photoacoustic streaming (PIPS) in the removal of filling remnants from root canals after rotary phase of retreatment and to examine the difference in the amount of residual material considering the type of sealer. Thirty-six extracted single-rooted human teeth were instrumented and randomly divided into three groups according to the filling material used: group 1: EndoSequence BC Sealer (Brassler, USA), group 2: MTA Fillapex (Angelus Solucoes Odontologicas, Londrina, Brasil), and group 3: AH Plus sealer (Dentsply DeTrey, Konstanz, Germany). Cold lateral condensation technique was used. After 2 weeks, the root canals were retreated with a rotary phase retreatment system (ProTaper Universal Retreatment, Maillefer, Ballaigues, Switzerland), followed by Er:YAG laser-activated irrigation (photon-initiated photoacoustic streaming, PIPS). The specimens were scanned in a micro-computed tomographic (micro-CT) device after root canal filling, after the rotary retreatment, and after the PIPS. There was significant reduction in the amount of filling material after the rotary phase of retreatment in all groups (p < 0.05), the highest in the MTA Fillapex group (p < 0.001) and no difference between the EndoSequence BC and the AH Plus (p = 0.608). There was significant reduction of the filling remnants after the PIPS in all groups (p < 0.05). The MTA Fillapex was the most easily removed during rotary phase of the retreatment, and there were no differences in the amount of the remaining filling material between EndoSequence BC and the AH Plus groups after rotary phase of the retreatment. The PIPS improved the removal of filling remnants in all groups.

Translation and validation of the Croatian version of the Oral Impacts on Daily Performances (OIDP) scale.

Background/Aim: Among numerous sociodental indicators the Oral Impacts on Daily Performance (OIPD) is one of the most broadly applied. The aim of this study was to develop and test psychometric properties of a Croatian version of OIDP scale. Methods: The OIDP instrument was translated from English to Croatian in a forward-backward method. The Croatian version was tested for reliability, construct validity and responsiveness on a sample of 702 participants (255 men), aged 18-86 years. Results: Internal consistency of Croatian version of the OIDP was acceptable (alpha = 0.80) and 69.4% of the examinees had oral impacts relating to one or several performances. The most frequently affected performance was eating (53.7%). The test-retest reliability was high (r = 0.99; 95% CI: 0.97-0.99), the mean difference between the OIDP summary scores in two-week interval was not statistically significant. In construct validity testing there was statistically significant correlation between OIDP and self-assessed general and oral health, somatisation, depression and Oral Health Impact Profile ranging from 0.157 to 0.516. Responsiveness was confirmed by a significant reduction of oral impacts on daily performances in subjects before and after treatment of acute dental pain (p < 0.001). Conclusion: The Croatian OIDP index showed good psychometric properties in terms of construct validity, internal consistency, test-retest reliability and responsiveness confirming its appropriateness for use among Croatian population.

Coronally advanced flap alone or with connective tissue graft in the treatment of single gingival recession defects: a long-term randomized clinical trial.

BACKGROUND: Numerous surgical approaches for the treatment of single gingival recession (GR) defects are documented in the literature. The aim of this 5-year, split mouth-design, randomized clinical trial was to evaluate the effectiveness of coronally advanced flap (CAF) alone versus CAF with connective tissue graft (CAF+CTG) in the treatment of single Miller Class I and II GR defects. METHODS: Thirty-seven patients with 114 bilateral, single Miller Class I and II GR defects were treated with CAF on one side of the mouth and CAF+CTG on the other side. Clinical measurements (GR length [REC], keratinized tissue width [KT], complete root coverage [CRC], and percentage of root coverage [PRC]) were evaluated before surgery and after 6, 12, 24, and 60 months. RESULTS: There was a significant reduction of REC and increase of KT after surgery in both groups. CAF+CTG showed significantly better results for all evaluated clinical parameters in all observed follow-up periods. Miller Class I defects showed better results in terms of REC, CRC, and PRC, whereas Miller Class II showed better results in KT, both in favor of CAF+CTG. Miller Class I defects showed better results than Miller Class II GR defects regardless of the surgical procedure used. CONCLUSIONS: Both surgical procedures were effective in the treatment of single Miller Class I and II GR defects. The CAF+CTG procedure provided better long-term outcomes (60 months postoperatively) than CAF alone. Long-term stability of the gingival margin is less predictable for Miller Class II GR defects compared to those of Class I.

Irrigation of human prepared root canal--ex vivo based computational fluid dynamics analysis.

AIM: To analyze the influence of the needle type, insertion depth, and irrigant flow rate on irrigant flow pattern, flow velocity, and apical pressure by ex-vivo based endodontic irrigation computational fluid dynamics (CFD) analysis. METHODS: Human upper canine root canal was prepared using rotary files. Contrast fluid was introduced in the root canal and scanned by computed tomography (CT) providing a three-dimensional object that was exported to the computer-assisted design (CAD) software. Two probe points were established in the apical portion of the root canal model for flow velocity and pressure measurement. Three different CAD models of 27G irrigation needles (closed-end side-vented, notched open-end, and bevel open-end) were created and placed at 25, 50, 75, and 95% of the working length (WL). Flow rates of 0.05, 0.1, 0.2, 0.3, and 0.4 mL/s were simulated. A total of 60 irrigation simulations were performed by CFD fluid flow solver. RESULTS: Closed-end side-vented needle required insertion depth closer to WL, regarding efficient irrigant replacement, compared to open-end irrigation needle types, which besides increased velocity produced increased irrigant apical pressure. For all irrigation needle types and needle insertion depths, the increase of flow rate was followed by an increased irrigant apical pressure. CONCLUSIONS: The human root canal shape obtained by CT is applicable in the CFD analysis of endodontic irrigation. All the analyzed values -irrigant flow pattern, velocity, and pressure - were influenced by irrigation needle type, as well as needle insertion depth and irrigant flow rate.

[Antibiotic prophylaxis of infective endocarditis in stomatology--a survey of cardiologists]. / Antibiotska profilaksa infekcijskog endokarditisa u stomatologiji--kardioloska praksa.

According to epidemiological reports; 14-20% of infectious endocarditis (IE) are associated with previous stomatological procedures (oral surgery, procedures during periodontal and conservative endodontic therapy and intra-ligament anesthesia) which cause transitory bacteriemia for 10-15 minutes. In patients at risk, such short lasting bacteriemia is sufficient for the development of infectious endocarditis. In everyday practice we encounter patients at risk for IE referred to oral surgery (most often tooth extraction) at the Oral Surgery Division, Department of Facial, Maxillary and Oral Surgery, Dubrava University Hospital. Majority of these patients are given IE prophylaxis according to the latest AHA recommendations. For some patients we first consult a cardiologist due to the underlying disease, and as a rule these patients return with cardiologist's advice on IE prophylaxis. We noticed that these recommendations differ between cardiologists. Some cardiologists have for years been recommending the same "prophylaxis" which is not in accord with AHA guidelines. From the available cardiac records we analyzed antibiotic IE prophylaxis before oral surgery in cardiac patients at risk recommended by cardiologists in four Zagreb hospitals in 2003. We collected in total 17 recommendations prescribed by 12 cardiologists. Regretfully, none was in accord with valid AHA guidelines from 1997. Only 6 out of 17 recommendations are in agreement with the outdated guidelines from 1994, which also raises concern. Therefore, we thought it was worthwhile to present these cases, hoping this will stimulate discussion on common guidelines for the benefit of patients at risk for IE.