RESUMO
Electrocatalytic CO2 reduction (eCO2R) in acid holds promise in renewable electricity-powered CO2 utilization with high efficiency, but the hydrogen evolution reaction (HER) often prevails and results in a low eCO2R selectivity. Here, using cobalt phthalocyanine/Ketjen black (CoPc/KB) as the model catalysts, we systematically study the effect of active site density, operational current density, and hydrated cations on the acidic eCO2R selectivity and decipher it through the componential dynamics of electric double layer (EDL). The optimal CoPc-4/KB demonstrates a near-unity CO Faradaic efficiency from 50 to 400 mA cm-2 and superb operational stability (>120 h) at 100 mA cm-2. Aided by in situ Raman and infrared spectroscopies, we reveal that the proper cations establish an electrostatic shield for mitigating bulk H+ penetration and mediate the interfacial water structure for suppressing HER. This study should elicit further profound thinking on robust eCO2R system design from the perspective of multiphasic and dynamic EDL.
RESUMO
Implementing the synergistic effects between the metal and the ligand has successfully streamlined the energetics for CO2 activation and gained high catalytic activities, establishing the important breakthroughs in photocatalytic CO2 reduction. Herein, we describe a Ni(II) N-confused porphyrin complex (NiNCP) featuring an acidic N-H group. It is readily deprotonated and exists in an anion form during catalysis. Owing to this functional site, NiNCP gave rise to an outstanding turnover number (TON) as high as 217,000 with a 98% selectivity for CO2 reduction to CO, while the parent Ni(II) porphyrin (NiTPP) was found to be nearly inactive. Our mechanistic analysis revealed a nonclassical reaction pattern where CO2 was effectively activated via the attack of the Lewis-basic ligand. The resulting ligand-bound CO2 adduct could be further reduced to produce CO. This new metal-ligand synergistic effect is anticipated to inspire the design of highly active catalysts for small molecule activations.
RESUMO
Artificial photocatalytic CO2 reduction (CO2R) holds great promise to directly store solar energy into chemical bonds. The slow charge and mass transfer kinetics at the triphasic solid-liquid-gas interface calls for the rational design of heterogeneous photocatalysts concertedly boosting interfacial charge transfer, local CO2 concentration, and exposure of active sites. To meet these requirements, in this study heterostructures of CdS/MOL (MOL = metal-organic layer) furnishing different redox Co sites are fabricated for CO2R photocatalysts. It is found that the coordination environment of Co is key to photocatalytic activity. The best catalyst ensemble comprising ligand-chelated Co2+ with the bipyridine electron mediator demonstrates a high CO yield rate of 1523 µmol h-1 gcat -1, selectivity of 95.8% and TON of 1462.4, which are ranked among the best seen in literature. Comprehensive photochemical and electroanalytical characterizations attribute the high CO2R performance to the improved photocarrier separation and charge kinetics originated from the proper energy band alignment and coordination chemistry. This work highlights the construction of 2D heterostructures and modulation of transition metal coordination to expedite the charge kinetics in photocatalytic CO2 reduction.
RESUMO
Breaking the D4h symmetry in the square-planar M-N4 configuration of macrocycle molecular catalysts has witnessed enhanced electrocatalytic activity, but at the expense of electrochemical stability. Herein, we hypothesize that the lability of the active Cu-N3 motifs in the N-confused copper (II) tetraphenylporphyrin (CuNCP) could be overcome by applying pulsed potential electrolysis (PPE) during electrocatalytic carbon dioxide reduction. We find that applying PPE can indeed enhance the CH4 selectivity on CuNCP by 3 folds to reach the partial current density of 170â mA cm-2 at >60 % Faradaic efficiency (FE) in flow cell. However, combined ex situ X-ray diffraction (XRD), transmission electron microscope (TEM), and in situ X-ray absorption spectroscopy (XAS), infrared (IR), Raman, scanning electrochemical microscopy (SECM) characterizations reveal that, in a prolonged time scale, the decomplexation of CuNCP is unavoidable, and the promoted water dissociation under high anodic bias with lowered pH and enriched protons facilitates successive hydrogenation of *CO on the irreversibly reduced Cu nanoparticles, leading to the improved CH4 selectivity. As a key note, this study signifies the adaption of electrolytic protocol to the catalyst structure for tailoring local chemical environment towards efficient CO2 reduction.
RESUMO
Li-CO2 batteries that integrate energy storage with greenhouse gas fixation have received a great deal of attention in the pursuit of carbon neutrality. However, cyclic accumulation of the insulative and insoluble Li2CO3 on the cathode surface severely restrains the battery cyclability, especially under a high depth of discharge/charge. Herein, we design and fabricate a microreactor-type catalyst by embedding Ru nanoparticles into the shells of mesoporous hollow carbon spheres. We show that both the hollow cavity and mesoporous shell are indispensable for concertedly furnishing a high activity to catalyze reversible Li2CO3 formation/decomposition. This unique structure ensures that the Ru sites masked by exterior Li2CO3 deposits during charging can resume the redox process of discharge by working with the prestored electrolyte to establish an inner reaction path. The thus fabricated Li-CO2 batteries demonstrate remarkable cyclability of 1085 cycles under 0.5 Ah g-1 and 326 cycles under 2 Ah g-1 at 1 A g-1, outshining most of the literature reports. This study highlights a smart catalyst design to boost the reversibility and cyclability of Li-CO2 batteries through an "in & out" strategy.
RESUMO
Ce-based materials have been widely used in photocatalysis and other fields because of their rich redox pairs and oxygen vacancies, despite research on the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) remaining scare. However, most pristine cerium-based materials, such as CeO2, are non-conductive materials. Therefore, how to obtain highly conductive and stable OER/ORR electrocatalysts is currently a hot research topic. To overcome these limitations, researchers have proposed a variety of strategies to promote the development of Ce-based electrocatalysts in recent years. This progress report focuses on reviewing new strategies concerning three categories of Ce-based electrocatalysts: metal-organic framework (MOF) derivatives, structure tuning, and polymetallic doping. It also puts forward the main existing problems and future prospects. The content of cerium in the crust is about 0.0046%, which is the highest among the rare earth elements. As a low-cost rare earth material, Ce-based materials have a bright future in the field of electrocatalysis due to replacing precious metal and some transition metals.