h-BN in the making: The surface chemistry of borazine on Rh(111).

Borazine is a well-established precursor molecule for the growth of hexagonal boron nitride (h-BN) via chemical vapor deposition on metal substrates. To understand the formation of the h-BN/Rh(111) moiré from borazine on a molecular level, we investigated the low-temperature adsorption and thermally induced on-surface reaction of borazine on Rh(111) in situ using synchrotron radiation-based high-resolution x-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, and near-edge x-ray absorption fine structure measurements. We find that borazine adsorbs mainly as an intact molecule and have identified a flat-lying adsorption geometry. Borazine multilayers are observed to desorb below 200 K. Starting at about 300 K, dehydrogenation of the remaining borazine and borazine fragments takes place, and disordered boron nitride starts to grow. Above 600 K, the formation of the h-BN sets in. Finally, at 1100 K, the conversion to h-BN is complete. The h-BN formed by deposition and post-annealing was compared to the h-BN grown by an established procedure, proving the successful preparation of the desired two-dimensional material.

Surface Studies on the Energy Release of the MOST System 2-Carbethoxy-3-Phenyl-Norbornadiene/Quadricyclane (PENBD/PEQC) on Pt(111) and Ni(111).

Novel energy-storage solutions are necessary for the transition from fossil to renewable energy sources. Auspicious candidates are so-called molecular solar thermal (MOST) systems. In our study, we investigate the surface chemistry of a derivatized norbornadiene/quadricyclane molecule pair. By using suitable push-pull substituents, a bathochromic shift of the absorption onset is achieved, allowing a greater overlap with the solar spectrum. Specifically, the adsorption and thermally induced reactions of 2-carbethoxy-3-phenyl-norbornadiene/quadricyclane are assessed on Pt(111) and Ni(111) as model catalyst surfaces by synchrotron radiation-based X-ray photoelectron spectroscopy (XPS). Comparison of the respective XP spectra enables the distinction of the energy-rich molecule from its energy-lean counterpart and allows qualitative information on the adsorption motifs to be derived. Monitoring the quantitative cycloreversion between 140 and 230 K spectroscopically demonstrates the release of the stored energy to be successfully triggered on Pt(111). Heating to above 300 K leads to fragmentation of the molecular framework. On Ni(111), no conversion of the energy-rich compound takes place. The individual decomposition pathways of the two isomers begin at 160 and 180 K, respectively. Pronounced desorption of almost the entire surface coverage only occurs for the energy-lean molecule on Ni(111) above 280 K; this suggests weakly bound species. The correlation between adsorption motif and desorption behavior is important for applications of MOST systems in heterogeneously catalyzed processes.

Surface Chemistry of the Molecular Solar Thermal Energy Storage System 2,3-Dicyano-Norbornadiene/Quadricyclane on Ni(111).

The front cover artwork is provided by the group of Prof. Dr. Christian Papp at Physical Chemistry II of FAU Erlangen-Nürnberg and FU Berlin. The image shows the isomerization reaction of the molecule pair 2,3-dicyano-norbornadiene/quadricyclane as potential molecular solar thermal (MOST) energy storage system. Read the full text of the Research Article at 10.1002/cphc.202200199.

Surface Chemistry of the Molecular Solar Thermal Energy Storage System 2,3-Dicyano-Norbornadiene/Quadricyclane on Ni(111).

Molecular solar thermal (MOST) systems are a promising approach for the introduction of sustainable energy storage solutions. We investigated the feasibility of the dicyano-substituted norbornadiene/quadricyclane molecule pair on Ni(111) for catalytic model studies. This derivatization is known to lead to a desired bathochromic shift of the absorption maximum of the parent compound. In our experiments further favorable properties were found: At low temperatures, both molecules adsorb intact without any dissociation. In situ temperature-programmed HR-XPS experiments reveal the conversion of (CN)2 -quadricyclane to (CN)2 -norbornadiene under energy release between 175 and 260 K. The absence of other surface species due to side reactions indicates full isomerization. Further heating leads to the decomposition of the molecular framework into smaller carbonaceous fragments above 290 K and finally to amorphous structures, carbide and nitride above 400 K. DFT calculations gave insights into the adsorption geometries. (CN)2 -norbornadiene is expected to interact stronger with the surface, with flat configurations being favorable. (CN)2 -quadricyclane exhibits smaller adsorption energies with negligible differences for flat and side-on geometries. Simulated XP spectra are in good agreement with experimental findings further supporting the specific spectroscopic fingerprints for both valence isomers.

Reactivity and Passivation of Fe Nanoclusters on h-BN/Rh(111).

The reactivity of iron nanocluster arrays on h-BN/Rh(111) was studied using in situ high-resolution X-ray photoelectron spectroscopy. The morphology and reactivity of the iron nanoclusters (Fe-NCs) were investigated by CO adsorption. On-top and hollow/edge sites were determined to be the available adsorption sites on the as-prepared Fe-NCs and CO dissociation was observed at 300 K. C- and O-precovered Fe-NCs showed no catalytic activity towards CO dissociation because the hollow/edge sites were blocked by the C and O atoms. Therefore, these adsorption sites were identified to be the most active sites of the Fe-NCs.

Selective Oxygen and Hydrogen Functionalization of the h-BN/Rh(111) Nanomesh.

We present detailed studies on the covalent adsorption of molecular oxygen and atomic hydrogen on the hexagonal boron nitride (h-BN) nanomesh on Rh(111). The functionalization of this two-dimensional (2D) material was investigated under ultra-high vacuum conditions using synchrotron radiation-based in situ high-resolution X-ray photoelectron spectroscopy, temperature-programmed X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy. We are able to provide a deep insight into the adsorption behavior and thermal stability of oxygen and hydrogen on h-BN/Rh(111). Oxygen functionalization was achieved via a supersonic molecular beam while hydrogen functionalization was realized using an atomic hydrogen source. Adsorption of the respective species was observed to occur selectively in the pores of h-BN leading to spatially defined modification of the 2D layer. The adsorption of the observed molecular oxygen species was found to be an activated process that requires high-energy oxygen molecules. Upon heating to 700 K, oxygen functionalization was observed to be almost reversible except for small amounts of boron oxides evolving due to the reaction of oxygen with the 2D material. Hydrogen functionalization of h-BN/Rh(111) was fully reversed upon heating to about 640 K.

Ethylene: Its adsorption, reaction, and coking on Pt/h-BN/Rh(111) nanocluster arrays.

We present well-ordered Pt nanocluster arrays supported on the h-BN/Rh(111) Moiré as a model system for an ethylene dehydrogenation catalyst. Thereby, the h-BN nanomesh serves as a chemically inert eggbox-like template for clusters with a narrow size distribution. The thermal evolution of ethylene is investigated by synchrotron-based high-resolution in situ x-ray photoelectron spectroscopy on the Pt nanoclusters. We compare our results with data on Pt(111) and Pt(355). Interestingly, the Pt nanoclusters and Pt(355) behave very similarly. Both open a new reaction pathway via vinylidene in addition to the route via ethylidyne known for Pt(111). Due to the importance of coking in ethylene dehydrogenation on Pt catalysts, we also studied C2H4 adsorption and decomposition on carbon precovered Pt nanoclusters. While the amount of adsorbed ethylene decreases linearly with the carbon coverage, we found that edge sites are more affected than facet sites and that the vinylidene reaction pathway is effectively suppressed by carbon residues.

Dehydrogenation of the liquid organic hydrogen carrier system 2-methylindole/2-methylindoline/2-methyloctahydroindole on Pt(111).

Among other N-heterocycles, indole and its substituted derivatives, such as methylindoles, are considered promising Liquid Organic Hydrogen Carriers (LOHCs) for the storage of renewable energy. We used X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD), and density-functional theory (DFT) to investigate the low temperature adsorption and consecutive dehydrogenation reaction during heating of 2-methylindole, 2-methylindoline, and 2-methyloctahydroindole on Pt(111) and their viability as the LOHC system. In the photoemission experiments, for all Hx-2-methylindoles, we find deprotonation at the NH bond starting between 240 and 300 K, resulting in a 2-methylindolide species. Simultaneously or before this reaction step, the dehydrogenation of 2-methyloctahydroindole via 2-methylindoline and 2-methylindole intermediates is observed. For 2-methyloctahydroindole, we also find π-allyl intermediates above 230 K. Starting at ∼390 K, decomposition of the remaining 2-methylindolide species takes place under the conditions of our surface science experiments. DFT calculations give insight into the relative energies of the various species, reaction intermediates, and their isomers both in the gas phase and on the Pt(111) surface.

Growth and stability of Pt nanoclusters from 1 to 50 atoms on h-BN/Rh(111).

The h-BN nanomesh on Rh(111) is used as eggbox-like template for the formation of arrays of Pt nanoclusters with a narrow size distribution. Nanoclusters with sizes from 1 up to 50 atoms are prepared simultaneously in a wedge-like structure by depositing a coverage gradient on the h-BN nanomesh, and thus can be investigated under identical conditions. We studied the preparation and properties of these Pt nanoclusters of different size in situ by high-resolution X-ray photoelectron spectroscopy and scanning tunneling microscopy. For a Pt coverage of 0.1 ML, all pores of the h-BN nanomesh are filled with nanoclusters with a remarkably uniform cluster size of ≈12 Pt atoms per pore, and high stability up to 400 K. Above 0.2 ML Pt, the clusters are less stable. The coverage dependent analysis shows that for Pt coverages below 0.1 ML, the number of nanoclusters is smaller - and the number of empty pores higher - than expected for a simple hit and stick mechanism. We assign this behavior to an initially higher mobility of the Pt atoms in a hot precursor state.

Oxygen Functionalization of Hexagonal Boron Nitride on Ni(111).

The interaction of single-layer hexagonal boron nitride (h-BN) on Ni(111) with molecular oxygen from a supersonic molecular beam led to a covalently bonded molecular oxygen species, which was identified as being between a superoxide and a peroxide. This is a rare example of an activated adsorption process leading to a molecular adsorbate. The amount of oxygen functionalization depended on the kinetic energy of the molecular beam. For a kinetic energy of 0.7 eV, an oxygen coverage of 0.4 ML was found. Near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy revealed a stronger bond of h-BN to the Ni(111) substrate in the presence of the covalently bound oxygen species. Oxygen adsorption also led to a shift of the valence bands to lower binding energies. Subsequent temperature-programmed X-ray photoelectron spectroscopy revealed that the oxygen boron bonds are stable up to approximately 580 K, when desorption, and simultaneously, etching of h-BN set in. The experimental results were substantiated by density functional theory calculations, which provided insight to the adsorption geometry, the adsorption energy and the reaction pathway.

Bimetallic Pd-Pt alloy nanocluster arrays on graphene/Rh(111): formation, stability, and dynamics.

Alloy catalysts have, in many cases, superior properties compared to their single metal counterparts. To gain deeper insights, we used graphene-supported bimetallic nanocluster arrays as a model system. We investigated the site occupation and the dynamic behavior of the metal distribution during adsorption and thermal treatment of CO layers on PdPt alloy nanocluster arrays supported on the graphene/Rh(111) Moiré. We find that the adsorption of CO combined with heating to 550 K leads to a rearrangement of the surface atoms, resulting in all the edge sites of the nanoclusters being occupied by Pd atoms. At the same time, Pt gets enriched at the surface.

Reactivity of CO and C2 H4 on Bimetallic Ptx Ag1-x /Pt(111) Surface Alloys Investigated by High-Resolution X-ray Photoelectron Spectroscopy.

We have investigated the adsorption and thermal reactivity of CO and C2 H4 on well-defined bimetallic Ptx Ag1-x /Pt(111) surface alloys (with x=0.67, 0.50, 0.38 and 0.32) using in situ synchrotron-based high-resolution X-ray photoelectron spectroscopy. During low-temperature (140 K) adsorption of CO, we find population of the energetically more stable Pt on-top site followed by the Pt bridge site, as known from clean Pt(111); CO does not adsorb on Ag facets under the applied conditions. The total CO coverage linearly decreases with Ag surface content. Upon heating, COon-top and CObridge desorb at higher temperatures than on bare Pt(111), for example, by ∼65 K for COon-top for an Ag content of 33 %. This shift is due to the well-known electronic ligand-effect of Ag atoms surrounding Pt atoms/clusters. For C2 H4 adsorption on the AgPt alloys at low temperature (120 K), we find two species in the C1s XP spectrum, each displaying a vibrational fine structure; this contrasts the situation on clean Pt(111), where only one species is found. Upon heating, ethylene reacts with ethylidyne being the dominant intermediate; in contrast to clean Pt(111), on the alloy surfaces the reaction to CCH3 occurs at much lower temperatures, e. g. by ∼60 K for the alloy with 68 % Ag, and no ethylene desorption is found.

Model Catalytic Studies of Novel Liquid Organic Hydrogen Carriers: Indole, Indoline and Octahydroindole on Pt(111).

Indole derivatives were recently proposed as potential liquid organic hydrogen carriers (LOHC) for storage of renewable energies. In this work, we have investigated the adsorption, dehydrogenation and degradation mechanisms in the indole/indoline/octahydroindole system on Pt(111). We have combined infrared reflection absorption spectroscopy (IRAS), X-ray photoelectron spectroscopy (XPS) and DFT calculations. Indole multilayers show a crystallization transition at 200 K, in which the molecules adopt a strongly tilted orientation, before the multilayer desorbs at 220 K. For indoline, a less pronounced restructuring transition occurs at 150 K and multilayer desorption is observed at 200 K. Octahydroindole multilayers desorb already at 185 K, without any indication for restructuring. Adsorbed monolayers of all three compounds are stable up to room temperature and undergo deprotonation at the NH bond above 300 K. For indoline, the reaction is followed by partial dehydrogenation at the 5-membered ring, leading to the formation of a flat-lying di-σ-indolide in the temperature range from 330-390 K. Noteworthy, the same surface intermediate is formed from indole. In contrast, the reaction of octahydroindole with Pt(111) leads to the formation of a different intermediate, which originates from partial dehydrogenation of the 6-membered ring. Above 390 K, all three compounds again form the same strongly dehydrogenated and partially decomposed surface species.