A systematic review of the role of integrated farming and the participation of universities in ensuring food security: Malaysia's effort.

Food security is critical for promoting health and well-being and achieving sustainable development, especially in developing countries. Despite the recent efforts to improve it, food security is still a concern due to the rapid increase in populations, conflicts, and natural disasters worldwide. Universities, particularly agricultural universities, play an essential role in addressing food security issues by researching, developing new technologies, and providing education and training to farmers and other stakeholders. The main objective of this review is to discuss the role of universities and integrated farming in ensuring food security, specifically in Malaysia. It includes a brief overview of the different types of integrated farming methods that can be used to improve food security and finally discusses the Student Farmer Entrepreneur program, which can be crucial for promoting food security by increasing agricultural productivity, promoting local food production, encouraging sustainable agriculture practices, and supporting rural development. This review also considers the significant impact of the Malaysian government and universities on food security. With integrated farming and the Student Farmer Entrepreneur program, food security can be further improved.

Characterization and isolation method of Gigantochloa scortechinii (Buluh Semantan) cellulose nanocrystals.

This study explored the impact of sodium hydroxide and benzoylation treatment on the production of cellulose nanocrystals from Semantan bamboo (Gigantochloa scortechinii). Bamboo cellulose nanocrystals (BCNs) were obtained via acid hydrolysis, with the effectiveness of an isolation method and chemical treatments demonstrated in removing non-cellulosic constituents. X-ray diffraction analysis revealed a crystalline cellulose II structure for benzoylated BCN (B) and a crystalline cellulose I structure for NaOH-treated BCN (S), with BCN (S) exhibiting a higher crystallinity index (80.55 %) compared to BCN (B) (67.87 %). The yield of BCN (B) (23.68 ± 1.10 %) was higher than BCN (S) (20.65 ± 2.21 %). Transmission electron microscopy images showed a mean diameter of 7.95 ± 2.79 nm for BCN (S) and 9.22 ± 3.38 nm for BCN (B). Thermogravimetric analysis indicated lower thermal stability for BCN (B) compared to BCN (S), with charcoal residues at 600 °C of 31.06 % and 22 %, respectively. Zeta potential values were -41.60 ± 1.97 mV for BCN (S) and -21.80 ± 2.54 mV for BCN (B). Gigantochloa scortechinii holds significant potential for sustainable and eco-friendly applications in the construction, furniture, and renewable energy industries. These findings highlight the versatility and potential of BCNs derived from Gigantochloa scortechinii for various applications.

Fatigue and Impact Properties of Kenaf/Glass-Reinforced Hybrid Pultruded Composites for Structural Applications.

To address the weight, cost, and sustainability associated with fibreglass application in structural composites, plant fibres serve as an alternative to reduce and replace the usage of glass fibres. However, there remains a gap in the comprehensive research on plant fibre composites, particularly in their durability for viable structural applications. This research investigates the fatigue and impact properties of pultruded kenaf/glass-reinforced hybrid polyester composites tailored for structural applications. Utilising kenaf fibres in mat form, unidirectional E-glass fibre direct roving yarns, and unsaturated polyester resin as key constituents, pultruded kenaf/glass hybrid profiles were fabricated. The study reveals that pultruded WK/UG alternate specimens exhibit commendable fatigue properties (18,630 cycles at 60% ultimate tensile strength, UTS) and fracture energy (261.3 kJ/m2), showcasing promise for moderate load structural applications. Notably, the pultruded 3 WK/UG/3WK variant emerges as a viable contender for low-load structural tasks recorded satisfactory fatigue properties (10,730 cycles at 60% UTS) and fracture energy (167.09 kJ/m2). Fatigue failure modes indicate that the stress applied is evenly distributed. Ductile failures and delaminations during impact test can be attributed to damping and energy absorbing properties of kenaf fibres. Moreover, incorporating kenaf as a hybrid alternative demonstrates substantial reductions in cost (35.7-50%) and weight (9.6-19.1%). This research establishes a foundation for advancing sustainable and efficient structural materials and highlights the significant role of materials design in shaping the future of engineering applications.

Experimental Investigation on the Corrosion Detectability of A36 Low Carbon Steel by the Method of Phased Array Corrosion Mapping.

Petrochemical plants use on-stream inspection often to detect and monitor the corrosion on the equipment and piping system. Compared to ultrasonic thickness gauging and pulse-echo A-scan, phased array corrosion mapping has better coverability and can scan a large area to detect general and localized corrosion. This paper's objective is to obtain documentary evidence for the accuracy of corrosion detection from 30 °C to 250 °C on A36 low-carbon steel by carrying out simulation experiments every 10 °C step. A minimum of three sets of phased array corrosion mapping data in each temperature were collected to study and evaluate the detectability. The data evidence could enhance the confidence level of the plant's end users in using phased array mapping in the future during inspections. The experiments were found to be insufficiently thorough despite addressing the initial concerns, leaving more area for discussion in further studies, such as expanding the investigation to thicker carbon steel, stainless steel, and wedge materials.

Ultrasonic Velocity and Attenuation of Low-Carbon Steel at High Temperatures.

On-stream inspections are the most appropriate method for routine inspections during plant operation without undergoing production downtime. Ultrasonic inspection, one of the on-stream inspection methods, faces challenges when performed at high temperatures exceeding the recommended 52 °C. This study aims to determine the ultrasonic velocity and attenuation with known material grade, thickness, and temperatures by comparing theoretical calculation and experimentation, with temperatures ranging between 30 °C to 250 °C on low-carbon steel, covering most petrochemical equipment material and working conditions. The aim of the theoretical analysis was to obtain Young's modulus, Poisson's ratio, and longitudinal velocity at different temperatures. The experiments validated the theoretical results of ultrasonic change due to temperature increase. It was found that the difference between the experiments and theoretical calculation is 3% at maximum. The experimental data of velocity and decibel change from the temperature range provide a reference for the future when dealing with unknown materials information on site that requires a quick corrosion status determination.

Thermal degradation, visco-elastic and fire-retardant behavior of hybrid Cyrtostachys Renda/kenaf fiber-reinforced MWCNT-modified phenolic composites.

Natural fibers have emerged as a potential alternate to synthetic fibers, because of their excellent performance, biodegradability, renewability and sustainability. This research has focused on investigating the thermal, visco-elastic and fire-retardant properties of different hybrid Cytostachys Renda (CR)/kenaf fiber (K) (50/0; 35/ 15, 25/25, 15/ 35, 0/50)-reinforced MWCNT (multi-walled carbon nanotubes)-modified phenolic composites. The mass% of MWCNT-modified phenolic resin was maintained 50 mass% including 0.5 mass% of MWCNT. In order to achieve homogeneous dispersion ball milling process was employed to incorporate the MWCNT into phenolic resin (powder). Thermal results from thermogravimetric analysis and differential scanning calorimetric analysis revealed that the hybrid composites (35/15; 35 mass% CR and 15 mass% K) showed higher thermal stability among the composite samples. Visco-elastic results revealed that kenaf fiber-based MWCNT-modified composites (0/50; 0 mass% CR and 50 mass% K) exhibited higher storage and loss modulus due to high modulus kenaf fiber. Fire-retardant analysis (UL-94) showed that all the composite samples met H-B self-extinguishing rating and exhibited slow burning rate according to limiting oxygen index (LOI) test. However, (15/35; 15 mass% CR and 35 mass% K) hybrid composites showed the highest time to ignition, highest fire performance index, lowest total heat release rate, average mass loss rate, average fire growth rate index and maximum average rate of heat emission. Moreover, the smoke density of all hybrid composites was found to be less than 200 which meets the federal aviation regulations (FAR) 25.853d standard. Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) was carried out to select an optimal composite sample considering the thermal, visco-elastic and fire-retardant behaviors. Through TOPSIS analysis, the hybrid (15/35; 15 mass% CR and 35 mass% K) composite sample has been selected as an optimal composite which can be used for high-temperature aircraft and automotive applications.

Selection of Natural Fibre for Pultruded Hybrid Synthetic/Natural Fibre Reinforced Polymer Composites Using Analytical Hierarchy Process for Structural Applications.

Application of synthetic fibres in composites has been raising environmental issues due to carbon emissions from the production site and reliability on non-renewable resources upon production. Hence, this research sets as a preliminary study to select suitable natural fibres to be hybridized with glass fibres for the development of sustainable and high-performance hybrid composites as potential alternative to conventional pultruded fibreglass composites in structural profile applications. In this study, analytical hierarchy process (AHP) was conducted to select the ideal natural fibre as reinforcement in the hybrid pultruded FRP composites suitable for structural applications. Hence, 13 natural fibre candidates were selected as alternatives and six criteria were chosen and analysed to select the best candidate for pultruded hybrid FRP. Criteria such as tensile strength, tensile modulus, density, cellulose content, elongation, and availability of fibres were assigned as the standard of selecting natural fibres for the application intended in this study. Among the 13 alternatives, kenaf was found to be the most suitable reinforcement for the application as it yielded the highest priority vector at 0.1. The results were then validated by carrying out sensitivity analysis to ensure kenaf is the most suitable material for the research.

Review of Recent Efforts in Cooling Photovoltaic Panels (PVs) for Enhanced Performance and Better Impact on the Environment.

The global need for energy has grown in tandem with mankind's development and spread. This has resulted in an increase in the use of fossil energy sources, a decline in these sources and an increase in pollution, necessitating the search for renewable energy sources. One of the important ways to reduce pollution resulting from the increasing consumption of fossil energy is to enhance the sources of solar energy, of which photovoltaic cells (PV) are one of its most important tools. Therefore, it was necessary to pay attention to improving its efficiency for it to become a promising source of clean energy. PVs turn solar energy into electricity; however, the amount of electricity generated decreases as the temperature of the cells rises in response to the sun's heat. Cooling of the optical surfaces is one of the most important elements to consider while running solar PV systems to obtain maximum efficiency. The electrical efficiency of PVs is enhanced when suitable cooling technology is used, and the rate of cell breakdown is reduced over time, extending the life of the PV panels. There are many materials used to remove unwanted heat in PV cells, and in recent years, the focus has been on integrating nanomaterials in specific proportions with traditional cooling materials such as water to improve their thermal properties. As a bio-material that is environmentally friendly, renewable, sustainable, inexpensive and has high mechanical properties, cellulose nanocrystals (CNCs) are one of the most promising materials for improving the properties of cooling materials for cooling PV cells and improving their performance.

A Review on the Effect of Fabric Reinforcement on Strength Enhancement of Natural Fiber Composites.

The main objective of this study is to examine the impact of reinforcements on the strength of natural fiber composites. Recent advancements in natural fiber composites have minimized the usage of man-made fibers, especially in the field of structural applications such as aircraft stiffeners and rotor blades. However, large variations in the strength and modulus of natural fiber degrade the properties of the composites and lower the safety level of the structures under dynamic load. Without compromising the safety of the composite structure, it is significant to enrich the strength and modulus of natural fiber reinforcement for real-time applications. The strength and durability of natural fiber can be enriched by reinforcing natural fiber. The reinforcement effect on natural fiber in their woven, braided, and knit forms enhances their structural properties. It improves the properties of natural fiber composites related to reinforcement with short and random-orientation fibers. The article also reviews the effect of the hybridization of natural fiber with cellulosic fiber, synthetic fiber, and intra-ply hybridization on its mechanical properties, dynamic mechanical properties, and free vibration characteristics, which are important for predicting the life and performance of natural fiber composites for weight-sensitive applications under dynamic load.

Effect of Prosopis Juliflora Thorns on Mechanical Properties of Plastic Waste Reinforced Epoxy Composites.

Plastics are unavoidable at this times, putting our planet in danger. The Prosopis juliflora (PJ) thorns are collected, processed, and powdered. The mechanical characteristics of these powders are examined when combined with polymer composites. Pores are the main cause of moisture input, hence using powder filler materials reduces the number of pores in the composite, increasing water resistance. The composites are made by altering three parameters: waste plastic content, filler powder composition, and chemical treatment. It was discovered that the integration of thorn powder increased the wear resistance. The composites were tested in accordance with ASTM standards, and the results were optimized. Based on the results, composite specimens were created and tested for validation.

Effect of Silver Nanopowder on Mechanical, Thermal and Antimicrobial Properties of Kenaf/HDPE Composites.

This study aims to investigate the effect of AgNPs on the mechanical, thermal and antimicrobial activity of kenaf/HDPE composites. AgNP material was prepared at different contents, from 0, 2, 4, 6, 8 to 10 wt%, by an internal mixer and hot compression at a temperature of 150 °C. Mechanical (tensile, modulus and elongation at break), thermal (TGA and DSC) and antimicrobial tests were performed to analyze behavior and inhibitory effects. The obtained results indicate that the effect of AgNP content displays improved tensile and modulus properties, as well as thermal and antimicrobial properties. The highest tensile stress is 5.07 MPa and was obtained at 10wt, TGA showed 10 wt% and had improved thermal stability and DSC showed improved stability with increased AgNP content. The findings of this study show the potential of incorporating AgNP concentrations as a secondary substitute to improve the performance in terms of mechanical, thermal and antimicrobial properties without treatment. The addition of AgNP content in polymer composite can be used as a secondary filler to improve the properties.

The Effect of Stacking Sequence on Fatigue Behaviour of Hybrid Pineapple Leaf Fibre/Carbon-Fibre-Reinforced Epoxy Composites.

This study examined the fatigue behaviour of pineapple leaf fibre/carbon hybrid laminate composites under various stacking sequences. The vacuum infusion technique was used to fabricate the symmetric quasi-isotropic oriented laminates, in which the stacking was varied. The laminate was tested under static and fatigue tensile load according to ASTM D3039-76 and ASTM D3479-96, respectively. Maximum tensile strength and modulus of 119.34 MPa and 6.86 GPa, respectively, were recorded for the laminate with external PALF ply and internal carbon ply oriented at [± 45°2, 0°/90°2]s (PCCP_45090). The fatigue tests showed that PCCP_45090 and CPPC_09045 (with internal PALF ply and external carbon ply oriented at [0°/90°2, ± 45°2]s) exhibited a higher useful life, especially at the high-stress level of the ultimate tensile strength. The normalised stress against the number of cycles showed that the stacking sequences of different ply orientations affected the fatigue behaviour more than the stacking sequences of the material. The laminate stacking sequence significantly affected the hysteresis energy and stiffness evolution. The scanning electron microscopy images showed that the fatigue failure modes included fibre pull-out, fibre breakage, matrix cracking, debonding, and delamination. The study concluded that PCCP_45090 exhibited an outstanding fatigue performance.

Consideration of Lamination Structural Analysis in a Multi-Layered Composite and Failure Analysis on Wing Design Application.

A finite element (FE) model is developed to study the structural performance on a composite wing of a UAV with a tubercle design at the leading edge of the wing. The experimental study of the designation of the composite at the wing skin is carried out to prove the simulation validity through material characteristics. In this paper, the numerical modeling for simulation is highlighted to correlate the process parameter setting of simulation replicating the actual experimental tests. The percentage difference was calculated to be 11.1% by tensile and 10.47% by flexural. The numerical work applied the study of FE analysis and developed a standardized numerical approach for structural optimization, known as FE-ACP simulation. The significant findings of deformation are obtained according to Schrenk's aerodynamic loading, while the prediction of failure mode of Tsai-Wu under interaction among stresses and strains was acquired at the seventh and eighth layer of both spars.

Effect of Nanofiller Content on Dynamic Mechanical and Thermal Properties of Multi-Walled Carbon Nanotube and Montmorillonite Nanoclay Filler Hybrid Shape Memory Epoxy Composites.

The aim of the present study has been to evaluate the effect of hybridization of montmorillonite (MMT) and multi-walled carbon nanotubes (MWCNT) on the thermal and viscoelastic properties of shape memory epoxy polymer (SMEP) nanocomposites. In this study, ultra-sonication was utilized to disperse 1%, 3%, and 5% MMT in combination with 0.5%, 1%, and 1.5% MWCNT into the epoxy system. The fabricated SMEP hybrid nanocomposites were characterized via differential scanning calorimetry, dynamic mechanical analysis, and thermogravimetric analysis. The storage modulus (E'), loss modulus (E"), tan δ, decomposition temperature, and decomposition rate, varied upon the addition of the fillers. Tan δ indicated a reduction of glass transition temperature (Tg) for all the hybrid SMEP nanocomposites. 3% MMT/1% MWCNT displayed best overall performance compared to other hybrid filler concentrations and indicated a better mechanical property compared to neat SMEP. These findings open a way to develop novel high-performance composites for various potential applications, such as morphing structures and actuators, as well as biomedical devices.

The Effect of Stacking Sequence and Ply Orientation on the Mechanical Properties of Pineapple Leaf Fibre (PALF)/Carbon Hybrid Laminate Composites.

In this paper, the effects of stacking sequence and ply orientation on the mechanical properties of pineapple leaf fibre (PALF)/carbon hybrid laminate composites were investigated. The hybrid laminates were fabricated using a vacuum infusion technique in which the stacking sequences and ply orientations were varied, which were divided into the categories of cross-ply symmetric, angle-ply symmetric, and symmetric quasi-isotropic. The results of tensile and flexural tests showed that the laminate with interior carbon plies and ply orientation [0°, 90°] exhibited the highest tensile strength (187.67 MPa) and modulus (5.23 GPa). However, the highest flexural strength (289.46 MPa) and modulus (4.82 GPa) were recorded for the laminate with exterior carbon plies and the same ply orientation. The fracture behaviour of the laminates was determined by using scanning electron microscopy, and the results showed that failure usually initiated at the weakest PALF layer. The failure modes included fibre pull-out, fibre breaking, matrix crack, debonding, and delamination.

Mechanical Performance of Unstitched and Silk Fiber-Stitched Woven Kenaf Fiber-Reinforced Epoxy Composites.

Fiber composites are known to have poor through-thickness mechanical properties due to the absence of a Z-direction binder. This issue is more critical with the use of natural fibers due to their low strength compared to synthetic fibers. Stitching is a through-thickness toughening method that is used to introduce fibers in the Z-direction, which will result in better through-thickness mechanical properties. This research was carried out to determine the mechanical properties of unstitched and silk fiber-stitched woven kenaf-reinforced epoxy composites. The woven kenaf mat was stitched with silk fiber using a commercial sewing machine. The specimens were fabricated using a hand lay-up method. Three specimens were fabricated, one unstitched and two silk-stitched with deferent stitching orientations. The results show that the stitched specimens have comparable in-plane mechanical properties to the unstitched specimens. For the tensile mechanical test, stitched specimens show similar and 17.1% higher tensile strength compared to the unstitched specimens. The flexural mechanical test results show around a 9% decrease in the flexural strength for the stitched specimens. On the other hand, the Izod impact mechanical test results show a significant improvement of 33% for the stitched specimens, which means that stitching has successfully improved the out-of-plane mechanical properties. The outcome of this research indicates that the stitched specimens have better mechanical performance compared to the unstitched specimens and that the decrease in the flexural strength is insignificant in contrast with the remarkable enhancement in the impact strength.

Structural, Morphological and Thermal Properties of Cellulose Nanofibers from Napier fiber (Pennisetum purpureum).

The purpose of the study is to investigate the utilisation of Napier fiber (Pennisetum purpureum) as a source for the fabrication of cellulose nanofibers (CNF). In this study, cellulose nanofibers (CNF) from Napier fiber were isolated via ball-milling assisted by acid hydrolysis. Acid hydrolysis with different molarities (1.0, 3.8 and 5.6 M) was performed efficiently facilitate cellulose fiber size reduction. The resulting CNFs were characterised through Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), particle size analyser (PSA), field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The FTIR results demonstrated that there were no obvious changes observed between the spectra of the CNFs with different molarities of acid hydrolysis. With 5.6 M acid hydrolysis, the XRD analysis displayed the highest degree of CNF crystallinity at 70.67%. In a thermal analysis by TGA and DTG, cellulose nanofiber with 5.6 M acid hydrolysis tended to produce cellulose nanofibers with higher thermal stability. As evidenced by the structural morphologies, a fibrous network nanostructure was obtained under TEM and AFM analysis, while a compact structure was observed under FESEM analysis. In conclusion, the isolated CNFs from Napier-derived cellulose are expected to yield potential to be used as a suitable source for nanocomposite production in various applications, including pharmaceutical, food packaging and biomedical fields.

COVID-19 outbreak in Malaysia: Actions taken by the Malaysian government.

BACKGROUND: Coronavirus disease 2019 (COVID-19), a novel pneumonia disease originating in Wuhan, was confirmed by the World Health Organization on January 12, 2020 before becoming an outbreak in all countries. OUTBREAK SITUATION: A stringent screening process at all airports in Malaysia was enforced after the first case outside China was reported in Thailand. Up to April 14, 2020, Malaysia had reported two waves of COVID-19 cases, with the first wave ending successfully within less than 2 months. In early March 2020, the second wave occurred, with worrying situations. ACTIONS TAKEN: The Government of Malaysia enforced a Movement Control Order starting on March 18, 2020 to break the chain of COVID-19. The media actively spread the hashtag #stayhome. Non-governmental organizations, as well as prison inmates, started to produce personal protective equipment for frontliners. Various organizations hosted fundraising events to provide essentials mainly to hospitals. A provisional hospital was set up and collaborations with healthcare service providers were granted, while additional laboratories were assigned to enhance the capabilities of the Ministry of Health. ECONOMIC DOWNTURN: An initial financial stimulus amounting to RM 20.0 billion was released in February 2020, before the highlighted PRIHATIN Package, amounting to RM 250 billion, was announced. The PRIHATIN Package has provided governmental support to society, covering people of various backgrounds from students and families to business owners.