Impact of various microplastics on the morphological characteristics and nutrition of the young generation of beech (Fagus sylvatica L.).

Microplastics have the capacity to accumulate in soil due to their high resistance to degradation, consequently altering soil properties and influencing plant growth. This study focused on assessing the impact of various types and doses of microplastics on beech seedling growth. In our experiment, we used polypropylene and styrene granules with diameter of 4.0 mm in quantities of 2.5% and 7%. The hypothesis was that microplastics significantly affect seedlings' nutritional status and growth characteristics. The research analysed seedlings' nutrition, root morphological features, above-ground growth, and enzymatic activity in the substrate. Results confirmed the importance of microplastics in shaping the nutritional status of young beech trees. Microplastic type significantly impacted N/P and Ca/Mg stoichiometry, while microplastic quantity influenced Ca/Al and Ca+K+Mg/Al stoichiometry. Notably, only in the case of root diameter were significantly thicker roots noted in the control variant, whereas microplastics played a role in shaping the leaves' characteristics of the species studied. The leaf area was significantly larger in the control variant compared to the variant with polypropylene in the amount of 2.5% and styrene in the amount of 7%. Additionally, the study indicates a significant impact of microplastics on enzyme activity. In the case of CB and SP, the activity was twice as high in the control variant compared to the variants with microplastics. In the case of BG, the activity in the control variant was higher in relation to the variants used in the experiment. Research on the impact of microplastics on the growth of beech seedlings is crucial for enhancing our understanding of the effects of environmental pollution on forest ecosystems. Such studies are integral in shaping forestry management practices and fostering a broader public understanding of the ecological implications of plastic pollution.

Biochemistry of microwave controlled Heracleum sosnowskyi (Manden.) roots with an ecotoxicological aspect.

Sosnowski hogweed is an invasive weed in eastern-middle Europe that is dangerous to human health and the environment. The efficacy of its control using chemical and mechanical methods is limited. Electromagnetic radiation (microwaves) could be an environmentally friendly alternative for controlling this species. This study aims to: (1) Determine the effect of varying microwave treatment (MWT) durations on the control of S. hogweed using a device emitting microwaves at 2.45 GHz, 32.8 kW/m2; (2) Evaluate the impact of MWT on soil by an ecotoxicological bioassays; (3) Analyze biochemical changes occurring in the roots during the process. A field study was performed to assess the efficacy of S. hogweed control using MWT in times from 2.5 to 15 min. The MWT-treated soil was collected immediately after treatment (AT) and tested using bioassays (Phytotoxkit, Ostracodtoxkit, and Microtox). Fourteen days AT, the MWT hogweed roots were dug out, air-dried, and analyzed for the content and composition of essential oil, sugars, and fatty acids. According to the ecotoxicological biotests, the MWT soils were classified as non-toxic or low-toxic. The regeneration of hogweed was observed only in non-treated plants (control). Hogweed MWT for 2.5-15 min did not regenerate up to 14 days AT. The average weight of roots in hogweed MWT for 15.0 min was ca. two times smaller than the control plants. Those roots contained significantly higher amounts of sugars and saturated fatty acids than the control. We did not find a correlation between S. hogweed root essential oil content and composition and MWT time. The main compounds of essential oil were p­cymene and myristicin. No highly photosensitizing compounds were identified in the tested root oil. We conclude that MWT of S. hogweed could be an environmentally safe and prospective control method, but more studies are needed.

Microwave Control of Reynoutria japonica Houtt., Including Ecotoxicological Aspects and the Resveratrol Content in Rhizomes.

Japanese knotweed (Reynoutria japonica Houtt.) is Poland's invasive weed, for which there is no efficient control method. The rhizomes of this species are rich in resveratrol. In this work, we evaluated (1) the effectiveness of electromagnetic microwaves (MV) in destroying Japanese knotweed using an original device, HOGWEED (MV of 2450 MHz), (2) the ecotoxic effect of the MV on the soil environment, and (3) the resveratrol content in knotweed rhizomes after MV treatment. The field studies were carried out in 2022 in southern Poland. Cut plants were MV-treated for times of 5.0-25.0 min. The MV efficiency was checked 10 and 56 days after treatment (DAT). After MV treatment, fresh soil samples were taken to analyze their ecotoxicity. As a result, at 56 DAT, knotweed was controlled if MV was used for at least 20.0 min. The MV did not affect the soil ecotoxicity. The MV-treated soils were classified as non-toxic or low-toxic. To analyze the resveratrol content, healthy knotweed rhizomes were dug out, treated with MV in the laboratory at 2.5-10.0 min, and analyzed for resveratrol content in HPLC-MS/MS. As a result, the resveratrol in the rhizomes significantly decreased in a time-dependent manner following MV exposure.

Environmental and Production Aspects of Using Fertilizers Based on Waste Elemental Sulfur and Organic Materials.

Crop fertilization with sulfur is an important part of agricultural practices, as is the systematic increase in soil organic matter content. Materials of waste origin constitute a source of plant-available sulfur, as well as soil organic matter. The study was to verify the hypothesis assuming that combining waste sulfur pulp and its mixtures with organic materials enables simultaneous soil enrichment with readily available sulfur and organic matter. A 240-day incubation experiment was conducted, on two soils: very light and heavy; with two sulfur doses applied to each soil (20 and 40 mg S/kg d.m. for very light soil, and 30 and 60 mg S/kg d.m. for heavy soil). The sulfate sulfur content in the incubated soil material, treated with the addition of sulfur pulp and its mixtures with organic materials, increased significantly up to day 60 and then decreased. The application of these materials significantly increased the content of available sulfur and decreased the pH value of the incubated material. The effect of the introduced materials on dehydrogenase activity depended on soil granulometric composition (the impact of the applied materials on the activity of these enzymes in very light soil was small, and in heavy soil, their activity was usually limited by the presence of introduced materials). Application of the studied materials had little effect on the total organic carbon content in the incubated soil material (a significant change in the value of this parameter, in relation to the control soil, was recorded in some treatments of heavy soil).

Impact of Coffee Bean Roasting on the Content of Pyridines Determined by Analysis of Volatile Organic Compounds.

The aim of the study was to analyze the process of roasting coffee beans in a convection-conduction roaster (CC) without a heat exchanger and a convection-conduction-radiation roaster (CCR) with a heat exchanger for determination of the aroma profile. The aroma profile was analyzed using the SPME/GC-MS technique, and an Agrinose electronic nose was used to determine the aroma profile intensity. Arabica coffee beans from five regions of the world, namely, Peru, Costa Rica, Ethiopia, Guatemala, and Brazil, were the research material. The chemometric analyses revealed the dominance of azines, alcohols, aldehydes, hydrazides, and acids in the coffee aroma profile. Their share distinguished the aroma profiles depending on the country of origin of the coffee beans. The high content of pyridine from the azine group was characteristic for the coffee roasting process in the convection-conduction roaster without a heat exchanger, which was shown by the PCA analysis. The increased content of pyridine resulted from the appearance of coal tar, especially in the CC roaster. Pyridine has an unpleasant and bitter plant-like odor, and its excess is detrimental to the human organism. The dominant and elevated content of pyridine is a defect of the coffee roasting process in the CC roaster compared to the process carried out in the CCR machine. The results obtained with the Agrinose showed that the CC roasting method had a significant effect on the sensor responses. The effect of coal tar on the coffee beans resulted in an undesirable aroma profile characterized by increased amounts of aromatic volatile compounds and higher responses of Agrinose sensors.

A dataset for sustainability assessment of agroecological practices in a crop-livestock farming system.

This article presents data designed by European researchers who performed a literature review and interpreted the results to determine impact factors of many agroecological practices on a wide variety of sustainability indicators. The impact factors are represented in a matrix that connects practices to indicators. The indicators are related to environmental, economic and social sustainability of a typical European integrated crop-livestock farm. The data are included in the serious game SEGAE to learn agroecology, as described in "SEGAE: a serious game to learn agroecology" [1]. The data can be modified to adapt the game to other agricultural systems. Finally, the data can be re-used in research projects as a basis to assess impacts of agroecological practices.

Identification of the Olfactory Profile of Rapeseed Oil as a Function of Heating Time and Ratio of Volume and Surface Area of Contact with Oxygen Using an Electronic Nose.

The process of deep fat frying is the most common technological procedure applied to rapeseed oil. During heat treatment, oil loses its nutritional properties and its original consumer quality is lowered, which is often impossible to determine by organoleptic assessment. Therefore, the aim of the study was to correlate markers of the loss of the nutritional properties by rapeseed oil related to the frying time and the surface area of contact with oxygen with changes in the profile of volatile compounds. The investigations involved the process of 6-, 12-, and 18-h heating of oil with a surface-to-volume ratio (s/v ratio) of 0.378 cm-1, 0.189 cm-1, and 0.126 cm-1. Samples were analysed to determine changes in the content of polar compounds, colour, fatty acid composition, iodine value, and total chromanol content. The results were correlated with the emission of volatile compounds determined using gas chromatography and an electronic nose. The results clearly show a positive correlation between the qualitative degradation of the oil induced by prolonged heating and the response of the electronic nose to these changes. The three volumes, the maximum reaction of the metal oxide semiconductor chemoresistors, and the content of polar compounds increased along the extended frying time.