RESUMO
As a stochastic perturbation, the inter-core crosstalk (IC-XT) severely distorts the signal in multi-core fibers (MCF), especially for long-haul transmission. How to quickly measure and monitor the IC-XT online for an MCF-based space division multiplexing (SDM) system is of special importance. In this paper, we introduce the technology of auxiliary management and control channel (AMCC) to online monitor the IC-XT of MCF, in which the unique advantage of low-frequency auxiliary management and control signal is fully utilized with the limited influence on high-speed data transmission. Specifically, two orthogonal sequences are chosen as monitoring signals for the signal-channel core and the crosstalk-channel core, respectively, followed by digital signal processing (DSP) for the received signal to evaluate the real-time crosstalk accurately. The experimental verifications of XT online monitoring confirm the effectiveness of our proposed method with very small monitoring error (mostly < 0.5 dB) for both heterodyne XT and homodyne XT in the C and L bands, showing its great potential for future SDM systems.
RESUMO
The refractive index (RI) measurment of the liquid often changes with the sensor's temperature. Accurate RI measurements require simultaneous measurements of the liquid temperature to calibrate the RI measurement. This study proposed what we believe to be a novel dual D-shaped plastic optical fiber sensor capable of simultaneously measuring both RI and temperature. A fluorescent material made of rhodamine B (RhB) is embedded in one of the D-shaped structures of the dual D-shaped fiber, which can be excited by a green laser to produce orange fluorescence. The fluorescence and the input laser of the fiber are superimposed at the output end of the fiber to form a specklegram containing information of two wavelengths. It was found through experiments that the effects of temperature and RI change on the red and green channels of the specklegrams are different, and the neural network can learn this feature to complete the measurement of both RI and temperature parameters. For RI sensing, the maximum error between the average predicted value and the true value of the test set is 0.0005. For temperature sensing, the maximum error between the average predicted value and the true value of the test set is 0.26°C. In addition, because the intensity change of the fluorescence varies linearly with RI and temperature, the sensor also has good stability.
RESUMO
Multiple-input multiple-output (MIMO) detectors have been a key technology in communication systems. In this paper, a new MIMO detector is designed by combining the adaptive learning rate (ALR) with the convolutional neural network (CNN) and successfully implementing it in a mode division multiplexing (MDM) optical transmission system. The results show that the training and test accuracy of the signal in the system we proposed reaches 100%. What is more, we used the ALR-CNN to compare the performance with conventional detection algorithms. The results confirm that our DLNN exceeds the conventional MIMO detectors in performance and is able to achieve the ideal QPSK BER level. The minimum difference in the SNR is about 9.5 dB at a BER of the 10-3 order.
RESUMO
Multi-core fiber based on space division multiplexing technology provides a practical solution to achieve multi-channel and high-capacity signal transmission. However, long-distance and error-free transmission remains challenging due to the presence of inter-core crosstalk within the multi-core fiber. Here, we propose and prepare a novel trapezoid-index thirteen-core single-mode fiber to solve the problems that MCF has large inter-core crosstalk and the transmission capacity of single-mode fiber approaches the upper limit. The optical properties of thirteen-core single-mode fiber are measured and characterized by experimental setups. The inter-core crosstalk of the thirteen-core single-mode fiber is less than -62.50â dB/km at 1550â nm. At the same time, each core can transmit signals at a data rate of 10 Gb/s and achieve error-free signal transmission. The prepared optical fiber with a trapezoid-index core provides a new and feasible solution for reducing inter-core crosstalk, which can be loaded into current communication systems and applied in large data centers.
RESUMO
The inter-core crosstalk (IC-XT) of multi-core fiber (MCF) limits the capacity of space division multiplexing system (SDM) fundamentally. We develop a closed-form expression of the magnitude of IC-XT for various types of signals, which can well explain the mechanism of different fluctuation behaviors of the real-time short-term average crosstalk (STAXT) and bit error ratio (BER) for the optical signals with and without strong optical carrier. The experimental verifications with the real-time measurement of the BER and outage probability in a 7 × 10-Gb/s SDM system agree well with the proposed theory and confirm that the unmodulated optical carrier plays a substantial role in fluctuation of BER. The range of fluctuation can be reduced by 3 orders of magnitude for the optical signal without optical carrier. We also investigate the effect of IC-XT in a long-haul transmission system based on a recirculating 7-core fiber loop and develop a frequency-domain IC-XT measurement technique. Longer transmission distance is shown to have a narrower BER fluctuation range, since IC-XT is no longer the only dominant factor on transmission performance.
RESUMO
A graded-index 13-core 5-LP mode fiber with high doped core and stairway-index trench structure have been successfully prepared by Hole-drilling method and Plasma vapor deposition. This fiber has 104 spatial channels, realizing large capacity information transmission. By building an experimental platform, the 13-core 5-LP mode fiber have been tested and characterized. The core can stably transmit 5 LP modes. The transmission loss is lower than 0.5â dB/km. Inter-core crosstalk (ICXT) of each layer of core is analyzed in detail. The ICXT can be less than -30â dB/100â km. The test results show that this fiber can stably transmit 5 LP modes, and has the characteristics of low loss and low crosstalk, realizing large capacity transmission. This fiber provides a solution to the issue of limited fiber capacity.
RESUMO
BACKGROUND: Post-occlusive reactive hyperemia (PORH) test with signal spectral analysis coupled provides potential indicators for the assessment of microvascular functions. OBJECTIVE: The objective of this study is to investigate the variations of skin blood flow and temperature spectra in the PORH test. Furthermore, to quantify the oscillation amplitude response to occlusion within different frequency ranges. MATERIALS AND METHODS: Ten healthy volunteers participated in the PORH test and their hand skin temperature and blood flow images were captured by infrared thermography (IRT) and laser speckle contrast imaging (LSCI) system, respectively. Extracted signals from selected areas were then transformed into the time-frequency space by continuous wavelet transform for cross-correlation analysis and oscillation amplitude response comparisons. RESULTS: The LSCI and IRT signals extracted from fingertips showed stronger hyperemia response and larger oscillation amplitude compared with other areas, and their spectral cross-correlations decreased with frequency. According to statistical analysis, their oscillation amplitudes in the PORH stage were obviously larger than the baseline stage within endothelial, neurogenic, and myogenic frequency ranges (p < 0.05), and their quantitative indicators of oscillation amplitude response had high linear correlations within endothelial and neurogenic frequency ranges. CONCLUSION: Comparisons of IRT and LSCI techniques in recording the reaction to the PORH test were made in both temporal and spectral domains. The larger oscillation amplitudes suggested enhanced endothelial, neurogenic, and myogenic activities in the PORH test. We hope this study is also significant for investigations of response to the PORH test by other non-invasive techniques.
Assuntos
Hiperemia , Humanos , Hiperemia/diagnóstico por imagem , Termografia , Imagem de Contraste de Manchas a Laser , Fluxometria por Laser-Doppler/métodos , Microcirculação , Pele/irrigação sanguínea , Fluxo Sanguíneo RegionalRESUMO
Real-time polymerase chain reaction (PCR) technology is essential in nucleic acid detection and point-of-care testing (POCT). However, nowadays, the classical qPCR instrument has the deficiency of its bulky volume, high cost, and inconvenience to use; hence, a low-cost and easy-to-use PCR equipment was thus developed consisting of a hardware subsystem as well as a software subsystem based on an improved proportional-integral-derivative (PID) system. The proposed system not only could hold self-setting reaction cycles of temperature rising and falling automatically but also the temperature during the constant temperature stage was regulated steady based on improved temperature control algorithm, which proved its great effect compared with the reaction temperature derived from an infrared thermal imaging camera. The experimental results in gene detection research also could indicate its applicability and stability of our developed PCR system by using the amplification curve analysis, the melting curve analysis, and agarose gel electrophoresis analysis compared with the commercial PCR instrument, which illustrates the great potential application value of the proposed PCR system.
RESUMO
We propose and experimentally demonstrate symmetrical (homo-modal) and asymmetrical (hetero-modal) full-duplex bi-directional architectures based on dual-vector eigenmodes multiplexing over a 3 km few mode fiber (FMF). Firstly, 4 vector modes (VMs) of 2 mode groups (MGs), l = 0 (HE11o and HE11e modes) and l = +2 (EH11o and EH11e modes), each carrying a 14 GBaud quadrature phase-shift keying (QPSK) signal, are utilized in the up and down links and a 224 Gb/s same-mode bi-directional transmission is successfully realized. The crosstalk between the VMs in l = 0 and l = +2 of this full-duplex system is less than -13.8 dB. To strengthen the immunity to performance degradation induced by connector reflection and back scattering, we propose an effective approach to mitigate impairments by using hetero-modes on two terminals of the bi-directional system. Then, 2 VMs of l = 0 and 2 VMs of l = +2 are respectively employed in the up and down streams. The channel isolation between the VMs in l = 0 and l = +2 of such full-duplex link is larger than 19 dB, which supports a 448 Gb/s bi-directional transmission with 28 GBaud 16-ary quadrature amplitude modulation (QAM) modulation over a 3 km FMF by using 2 × 2 MIMO. Moreover, mode-wavelength division multiplexing including 2 modes and 4 wavelengths in both up and down streams is implemented in the transmission system. A total capacity of the 1.792 Tb/s link with 28 GBaud 16-QAM signal over each channel is successfully realized over the 3 km FMF. The measured bit-error-ratios (BERs) of all channels are below the 7% hard decision forward error correction (FEC) threshold at 3.8 × 10-3. The experimental results adequately indicate that such a scheme has a great potential in high-speed bi-directional point-to-point (P2P) optical interconnects.
RESUMO
Herein, a TEMPO-oxidized cellulose-grafted-polystyrene hypercrosslinked polymer (TOC-PS-HCP) was synthesized facilely by TEMPO oxidation, grafting copolymerization and post crosslinking route. Based on the structural characterization, it was confirmed that TOC-PS-HCP mainly consisted of polystyrene chain on cellulose and rigid crosslinked bridge. Additionally, the as-prepared TOC-PS-HCP displayed appropriate hydrophobicity (water contact angle = 102.44°) and high specific surface area (SBET = 601.20 m2·g--1), which could efficiently recover ethylbenzene and styrene from PO/SM wastewater. The adsorption experiment was conducted to study the recovery performance for ethylbenzene and styrene in the aqueous phase. The results showed that TOC-PS-HCP could recover ethylbenzene and styrene quickly by adsorption process, and maintain a stable recovery rate both in different aqueous conditions and recycle experiments. The adsorption experiment in the simulated wastewater solution showed that TOC-PS-HCP exhibited the greater affinity for ethylbenzene and styrene than other substrates. Furthermore, a possible mechanism for the efficient recovery of ethylbenzene and styrene was suggested on the basis of experimental and theoretical results, which may be associated with van der Waals force and π-π stacking.
Assuntos
Celulose/química , Óxidos N-Cíclicos/química , Polímeros/química , Águas Residuárias/química , Purificação da Água/métodos , AdsorçãoRESUMO
BACKGROUND: As proven to reflect the work state of heart and physiological situation objectively, electrocardiogram (ECG) is widely used in the assessment of human health, especially the diagnosis of heart disease. The accuracy and reliability of abnormal ECG (AECG) decision depend to a large extent on the feature extraction. However, it is often uneasy or even impossible to obtain accurate features, as the detection process of ECG is easily disturbed by the external environment. And AECG got many species and great variation. What's more, the ECG result obtained after a long time past, which can not reach the purpose of early warning or real-time disease diagnosis. Therefore, developing an intelligent classification model with an accurate feature extraction method to identify AECG is of quite significance. This study aimed to explore an accurate feature extraction method of ECG and establish a suitable model for identifying AECG and the diagnosis of heart disease. METHODS: In this research, the wavelet combined with four operations and adaptive threshold methods were applied to filter the ECG and extract its feature waves first. Then, a BP neural network (BPNN) intelligent model and a particle swarm optimization (PSO) improved BPNN (PSO-BPNN) intelligent model based on MIT-BIH open database was established to identify ECG. To reduce the complexity of the model, the principal component analysis (PCA) was used to minimize the feature dimension. RESULTS: Wavelet transforms combined four operations and adaptive threshold methods were capable of ECG filtering and feature extraction. PCA can significantly deduce the modeling feature dimension to minimize the complexity and save classification time. The PSO-BPNN intelligent model was suitable for identifying five types of ECG and showed better effects while comparing it with the BPNN model. CONCLUSION: In summary, it was further concluded that the PSO-BPNN intelligent model would be a suitable way to identify AECG and provide a tool for the diagnosis of heart disease.
Assuntos
Algoritmos , Eletrocardiografia , Humanos , Redes Neurais de Computação , Reprodutibilidade dos Testes , Análise de OndaletasRESUMO
Metals were for decades perceived as devoid of interesting optical properties that could be harnessed for optical components and devices. However, with the development of accurate nanofabrication techniques and precise control over architectural parameters, metals can be structured and characterized on the nanoscale. Metallic plasmonic nanomaterials exhibit a number of unique structural and optical properties, which offer the potential for developing new types of plasmonic devices. Here, we demonstrate a low-loss broadband polarizer based on a hybrid plasmonic fiber structure using metals as polarization-selective absorption materials. The polarization mechanism, design, fabrication, and characteristics of the plasmonic polarizers are investigated theoretically, numerically, and experimentally. The theoretical analysis predicts that the polarization-selective absorption with insensitivity to wavelength enables hybrid plasmonic fibers to function as broadband polarizers. Numerical simulations give the comparison of the polarization-selective absorption of various metallic nanomaterials (Ag, Au, In, Al, Cr) and show that aluminum is regarded as the optimum absorption material for the plasmonic polarizer. Experimental results show that through precise control over geometrical parameters, this device is capable of offering a high polarization extinction ratio (PER) of over 40 dB and a low insertion loss (IL) of less than 1.3 dB in the wavelength region of 810.1-870.0 nm. Compared with commercial birefringent-crystal-fiber polarizers, the plasmonic fiber polarizer has a better PER and IL bandwidth. These merits, combined with a compact and robust configuration, enable the plasmonic polarizer to have great potential in a broad range of applications.
RESUMO
The interaction between light and metallic nanostructures leads to many impressive achievements and has a wide range of applications. The thin-metal-film plasmon-assisted fiber-optic polarizer is one of the essential applications. However, the polarization mechanism and the transmitted polarization of the plasmon-assisted polarizer have given rise to controversy over the past decade. Which of the polarizations is preferentially transmitted through the polarizer? The transverse electric polarization or the transverse magnetic polarization? Here, special emphasis is placed upon the polarization mechanism and the transmitted polarization of thin-metal-film plasmon-assisted fiber polarizers. We first investigate the polarization mechanism of the polarizers theoretically and numerically. Furthermore, a novel approach is proposed to demonstrate the transmitted polarization in the plasmon-assisted fiber polarizers experimentally. We demonstrate that the polarization mechanism is based on the polarization selective absorption of the metallic material, and the transverse electric polarization is the only transmitted polarization of the metallic plasmon-assisted polarizer. Moreover, the plasmon-assisted polarizer can offer a high polarization extinction ratio (33.1 dB) and a low insertion loss (1.1 dB) at room temperature and have excellent temperature stability in the range of -48 to 82 °C. Experimental results agree well with our theoretical and numerical analyses. The findings clarify the confusion about the polarization mechanism and the transmitted polarization of metallic plasmon-assisted fiber polarizers over the past decade, providing new ground for the exploration of polarization-sensitive optical systems, with good potential applications in the fields of optical sensors, plasmonic lasers, coherent optical communications, and biosensor systems.
RESUMO
For hitless flexible coherent transceivers based next-generation agile optical network, efficient modulation format identification (MFI) is an essential element in digital signal processing (DSP) flow at the receiver-side (Rx). In this paper, we propose a blind and fast MFI scheme with high identification accuracy at low optical signal-to-noise ratio (OSNR) regime. This is achieved by first raising the signal to the 4th power and calculate the peak-to-average power ratio (PAPR) of the corresponding spectra to distinguish 32 quadrature amplitude modulation (QAM) from quadrature phase shift keying (QPSK), 16 and 64QAM signals. Then, followed by iterative partition schemes to remove signals with phase ±π4,±3π4 (or QPSK-like phases) based on the signal amplitudes, the PAPR of the remaining signals is calculated to distinguish the other three formats. Additionally, by frequency offset (FO) pre-compensation, the spectrum can be obtained using sparse-fast-Fourier-transform (S-FFT), which greatly reduces the total complexity. The MFI performance is numerically and experimentally investigated by 28 Gbaud dual-polarization (DP) coherent optical back-to-back (B2B) and up to 1500 km standard single mode fiber (SSMF) transmission system using QPSK, 16QAM, 32QAM, and 64QAM. Results show that high identification accuracy can be achieved, even when OSNR is lower than that required for the 20% forward error correction (FEC) threshold of BER=2×10-2 for each format. Furthermore, fast format switching between 64QAM-32QAM and 32QAM-16QAM are demonstrated experimentally for B2B scenario and 900 km SSMF with the proposed MFI technique, respectively.
RESUMO
Optical filters have been adopted in many applications such as reconfigurable telecommunication switches, tunable lasers and spectral imaging. However, most of commercialized filters based on a micro-electrical-mechanical system (MEMS) only provide a minimum bandwidth of 25 GHz in telecom so far. In this work, the programmable filter based on a digital micromirror device (DMD) experimentally demonstrated a minimum bandwidth of 12.5 GHz in C-band that matched the grid width of the International Telecommunication Union (ITU) G.694.1 standard. It was capable of filtering multiple wavebands simultaneously and flexibly by remotely uploading binary holograms onto the DMD. The number of channels and the center wavelength could be adjusted independently, as well as the channel bandwidth and the output power. The center wavelength tuning resolution of this filter achieved 0.033 nm and the insertion loss was about 10 dB across the entire C-band. Since the DMD had a high power handling capability (25 KW/cm²) of around 200 times that of the liquid crystal on silicon (LCoS) chip, the DMD-based filters are expected to be applied in high power situations.
RESUMO
The correction to the funding in Appl. Opt.56, 6504 (2017)APOPAI0003-693510.1364/AO.56.006504 is presented in this erratum.
RESUMO
This paper demonstrates the principles of static and dynamic north-finding methods by measuring the projection of the Earth's rotation rate with a fiber optic gyroscope. For a comprehensive comparison of the two methods, the influence of a closed-loop feedback mechanism of a servo motor in a turntable is taken into consideration. Thus, we proposed the static and dynamic north-finding experimental implementations according to the different impact of the motor jitters and the different seeking times. Experimental results show that the dynamic method can reduce the north-finding bias error and instability by 60.1% and 54.6%, respectively, in the seeking time of 360 s, while the reduced proportions are 81.3% and 82.5%, respectively, in the seeking time of 120 s, compared with the static method under the jittering effect of the turntable. Therefore, it can be concluded that the dynamic method is more accurate and robust to the jittering effect.
RESUMO
We propose and demonstrate a fiber Bragg grating sensor interrogator based on a 2D imaging system using a virtually imaged phased array (VIPA) and infrared camera. There are no moving parts, and the interrogator has good stability and reliability. The absolute wavelength accuracy of the interrogator is better than that of traditional diffraction grating and a 1D-imaging-system-based method, thanks to the VIPA's high spectral resolution and large angular dispersion. The wavelength resolution of the interrogator is about 7 pm, and the spectral range of this interrogator is more than 30 nm. The optimum setup for the best wavelength resolution is analyzed.
RESUMO
This paper firstly demonstrated the refractive index (RI) characteristics of a singlemode-claddingless-singlemode fiber structure filter based fiber ring cavity laser sensing system. The experiment shows that the lasing wavelength shifts to red side with the ambient RI increase. Linear and parabolic fitting are both done to the measurements. The linear fitting result shows a good linearity for applications in some areas with the determination coefficient of 0.993. And a sensitivity of ~131.64nm/RIU is experimentally achieved with the aqueous solution RI ranging from 1.333 to 1.3707, which is competitively compared to other existing fiber-optic sensors. While the 2 order polynomial fitting function, which determination relationship is higher than 0.999, can be used to some more rigorous monitoring. The proposed fiber laser has a SNR of ~50dB, and 3dB bandwidth ~0.03nm.
RESUMO
An interferometric fiber-optic vibration sensing system using the phase-generated carrier (PGC) method is proposed and experimentally demonstrated. The sensing section consists of a Sagnac interferometer combined with a Mach-Zehnder interferometer, a length of sensing fiber is shared between the two interferometers. The PGC demodulation scheme is used to demodulate the time-varying phase shifts induced by vibrations. Spatial information can be extracted from the demodulated results. A prototype sensing system with a 628 m long sensing fiber has been tested and a spatial resolution better than 12 m is successfully achieved.