Efficient laser wakefield accelerator in pump depletion dominated bubble regime.

With the usage of the postcompression technique, few-cycle joule-class laser pulses are nowadays available extending the state of the art of 100 TW-class laser working at 10 Hz repetition. In this Letter, we explore the potential of wakefield acceleration when driven with such pulses. The numerical modeling predicts that 50% of the laser pulse energy can be transferred into electrons with energy above 15 MeV, and with charge exceeding several nanocoulombs for the electrons at hundreds of MeV energy. In such a regime, the laser pulse depletes its energy to plasma rapidly driving a strong cavitated wakefield. The self-steepening effect induces a continuous prolongation of a bubble resulting in a massive continuous self-injection that explains the extremely high charge of the beam rending this approach suitable for promoting Bremsstrahlung emitter and generator of tertiary particles, including neutrons released through photonuclear reactions.

The extreme light infrastructure-nuclear physics (ELI-NP) facility: new horizons in physics with 10 PW ultra-intense lasers and 20 MeV brilliant gamma beams.

The European Strategy Forum on Research Infrastructures (ESFRI) has selected in 2006 a proposal based on ultra-intense laser fields with intensities reaching up to 1022-1023 W cm-2 called 'ELI' for Extreme Light Infrastructure. The construction of a large-scale laser-centred, distributed pan-European research infrastructure, involving beyond the state-of-the-art ultra-short and ultra-intense laser technologies, received the approval for funding in 2011-2012. The three pillars of the ELI facility are being built in Czech Republic, Hungary and Romania. The Romanian pillar is ELI-Nuclear Physics (ELI-NP). The new facility is intended to serve a broad national, European and International science community. Its mission covers scientific research at the frontier of knowledge involving two domains. The first one is laser-driven experiments related to nuclear physics, strong-field quantum electrodynamics and associated vacuum effects. The second is based on a Compton backscattering high-brilliance and intense low-energy gamma beam (<20 MeV), a marriage of laser and accelerator technology which will allow us to investigate nuclear structure and reactions as well as nuclear astrophysics with unprecedented resolution and accuracy. In addition to fundamental themes, a large number of applications with significant societal impact are being developed. The ELI-NP research centre will be located in Magurele near Bucharest, Romania. The project is implemented by 'Horia Hulubei' National Institute for Physics and Nuclear Engineering (IFIN-HH). The project started in January 2013 and the new facility will be fully operational by the end of 2019. After a short introduction to multi-PW lasers and multi-MeV brilliant gamma beam scientific and technical description of the future ELI-NP facility as well as the present status of its implementation of ELI-NP, will be presented. The science and examples of societal applications at reach with these electromagnetic probes with much improved performances provided at this new facility will be discussed with a special focus on day-one experiments and associated novel instrumentation.

Substrate surface patterning by optical near field modulation around colloidal particles immersed in a liquid.

Optical near field enhancements in the vicinity of particles illuminated by laser light are increasingly recognized as a powerful tool for nanopatterning applications, but achieving sub-wavelength details from the near-field distribution remains a challenge. Here we present a quantitative analysis of the spatial modulation of the near optical fields generated using single 8 ps, 355 nm (and 532 nm) laser pulses around individual colloidal particles and small close packed arrays of such particles on silicon substrates. The analysis is presented for particles in air and, for the first time, when immersed in a range of liquid media. Immersion in a liquid allows detailed exploration of the effects on the near field of changing not just the magnitude but also the sign of the refractive index difference between the particle and the host medium. The level of agreement between the results of ray tracing and Mie scattering simulations, and the experimentally observed patterns on solid surfaces, should encourage further modelling, predictions and demonstrations of the rich palette of sub-wavelength surface profiles that can be achieved using colloidal particles immersed in liquids.

Gain dynamics in quickly ionized plasma for seeded operated soft x-ray lasers.

Harmonic seeded operation of a neon-like titanium plasma-based soft x-ray laser is described. The plasma amplifier is pumped with a variation of the grazing incidence technique involving a fast and localized ionization step. We discuss its effect on gain dynamics by measuring the amplifying factor as a function of the delay between pump pulse and harmonic seed. Two different regimes are pointed out, following the pumping scheme used. For one of them, a delay in the gain generation compared with the pumping laser pulse is observed.

Pattern formation on silicon by laser-initiated liquid-assisted colloidal lithography.

We report sub-diffraction limited patterning of Si substrate surfaces by laser-initiated liquid-assisted colloidal lithography. The technique involves exposing a two-dimensional lattice of transparent colloidal particles spin coated on the substrate of interest (here Si) immersed in a liquid (e.g. methanol, acetone, carbon tetrachloride, toluene) to a single picosecond pulse of ultraviolet laser radiation. Surface patterns formed using colloidal particles with different radii in the range 195 nm ≤ R ≤ 1.5 µm and liquids with differing indices of refraction (n(liquid)) are demonstrated, the detailed topographies of which are sensitively dependent upon whether the index of refraction of the colloidal particle (n(colloid)) is greater or smaller than n liquid (i.e. upon whether the incident light converges or diverges upon interaction with the particle). The spatial intensity modulation formed by diffraction of the single laser pulse by the colloidal particles is imprinted into the Si substrate.

Cell adhesion response on femtosecond laser initiated liquid assisted silicon surface.

Silicon substrates were irradiated at normal incidence with a femtosecond Ti:sapphire laser (Quatronix, 90 fs pulse duration, 1 kHz repetition rate, M(2) ~ 1.2, maximum energy peak 350 mJ ) operating at a wavelength of 400 nm and focused via a microscope objective (Newport; UV Objective Model, 37x 0.11 N.A.). The laser scanning was assisted by liquids precursors media such as methanol and 1,1,2-trichlorotrifluoroethane. By altering the processing parameters, such as incident laser energy, scanning speed, and different irradiation media, various surface structures were produced on areas with 1 mm(2) dimensions. We analyzed the dependence of the surface morphology on laser pulse energy, scanning speed and irradiation media. Well ordered areas are developed without imposing any boundary conditions for the capillary waves that coarsens the ripple pattern. To assess biomaterial-driven cell adhesion response we investigated actin filaments organization and cell morphological changes following growth onto processed silicon substrates. Our study of bone cell progenitor interaction with laser nanoprocessed silicon lines has shown that cells anchor mainly to contact points along the nanostructured surface. Consequently, actin filaments are stretched towards the 15 µm wide parallel lines increasing lateral cell spreading and changing the bipolar shape of mesenchymal stem cells.

Quantitative study of 10 Hz operation of a soft x-ray laser-energy stability and target considerations.

A soft x-ray laser from Ni-like Mo, pumped in grazing incidence (GRIP), is analyzed with regard to high repetition rate operation. Reliable lasing is obtained, but with significant energy fluctuations attributed mainly to beam pointing jitter from the pump laser. Two modes of operation are compared: continuously moving target and stationary target. With a moving target the soft X-ray output is constant on average, whereas the repeated use of the same target position leads to a pulse energy which increases for several tens of shots. This effect might be caused by improved guiding of the pump laser in the formed groove and the removal, through laser ablation, of the oxide layer on the target surface.

Optimization toward a high-average-brightness soft-x-ray laser pumped at grazing incidence.

We report the near-field imaging characterization of a 10 Hz Ni-like 18.9 nm molybdenum soft-x-ray laser pumped in a grazing incidence pumping (GRIP) geometry with a table-top laser driver. We investigate the effect of varying the GRIP angle on the spatial behavior of the soft-x-ray laser source. After multiparameter optimization, we were able to find conditions to generate routinely a high-repetition-rate soft-x-ray laser with an energy level of up to 3 microJ/pulse and to 6x10(17) photons/s/mm2/mrad2/(0.1% bandwidth) average brightness and 1x10(28) photons/s/mm2/mrad2/(0.1% bandwidth) peak brightness.